arch/arm64/boot/dts/renesas/ulcb-kf.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Kingfisher (ULCB extension) board
   4  *
   5  * Copyright (C) 2017 Renesas Electronics Corp.
   6  * Copyright (C) 2017 Cogent Embedded, Inc.
   7  */
   8
   9 /*
  10  * SSI-PCM3168A
  11  *      aplay   -D plughw:0,2 xxx.wav
  12  *      arecord -D plughw:0,3 xxx.wav
  13  */
  14
  15 / {
  16         aliases {
  17                 serial1 = &hscif0;
  18                 serial2 = &scif1;
  19                 mmc2 = &sdhi3;
  20         };
  21
  22         clksndsel: clksndsel {
  23                 #clock-cells = <0>;
  24                 compatible = "gpio-mux-clock";
  25                 clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */
  26                 select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
  27         };
  28
  29         hdmi1-out {
  30                 compatible = "hdmi-connector";
  31                 type = "a";
  32
  33                 port {
  34                         hdmi1_con: endpoint {
  35                                 remote-endpoint = <&adv7513_out>;
  36                         };
  37                 };
  38         };
  39
  40         accel_3v3: regulator-acc-3v3 {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "accel-3v3";
  43                 regulator-min-microvolt = <3300000>;
  44                 regulator-max-microvolt = <3300000>;
  45         };
  46
  47         hdmi_1v8: regulator-hdmi-1v8 {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "hdmi-1v8";
  50                 regulator-min-microvolt = <1800000>;
  51                 regulator-max-microvolt = <1800000>;
  52         };
  53
  54         hdmi_3v3: regulator-hdmi-3v3 {
  55                 compatible = "regulator-fixed";
  56                 regulator-name = "hdmi-3v3";
  57                 regulator-min-microvolt = <3300000>;
  58                 regulator-max-microvolt = <3300000>;
  59         };
  60
  61         snd_3p3v: regulator-snd_3p3v {
  62                 compatible = "regulator-fixed";
  63                 regulator-name = "snd-3.3v";
  64                 regulator-min-microvolt = <3300000>;
  65                 regulator-max-microvolt = <3300000>;
  66         };
  67
  68         snd_vcc5v: regulator-snd_vcc5v {
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "snd-vcc5v";
  71                 regulator-min-microvolt = <5000000>;
  72                 regulator-max-microvolt = <5000000>;
  73         };
  74
  75         wlan_en: regulator-wlan_en {
  76                 compatible = "regulator-fixed";
  77                 regulator-name = "wlan-en-regulator";
  78
  79                 regulator-min-microvolt = <3300000>;
  80                 regulator-max-microvolt = <3300000>;
  81
  82                 gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
  83                 startup-delay-us = <70000>;
  84                 enable-active-high;
  85         };
  86 };
  87
  88 &can0 {
  89         pinctrl-0 = <&can0_pins>;
  90         pinctrl-names = "default";
  91         status = "okay";
  92 };
  93
  94 &can1 {
  95         pinctrl-0 = <&can1_pins>;
  96         pinctrl-names = "default";
  97         status = "okay";
  98 };
  99
 100 &du {
 101         ports {
 102                 port@0 {
 103                         du_out_rgb: endpoint {
 104                                 remote-endpoint = <&adv7513_in>;
 105                         };
 106                 };
 107         };
 108 };
 109
 110 &ehci0 {
 111         dr_mode = "otg";
 112         status = "okay";
 113 };
 114
 115 &hscif0 {
 116         pinctrl-0 = <&hscif0_pins>;
 117         pinctrl-names = "default";
 118         uart-has-rtscts;
 119
 120         status = "okay";
 121 };
 122
 123 &hsusb {
 124         dr_mode = "otg";
 125         status = "okay";
 126 };
 127
 128 &i2c2 {
 129         i2cswitch2: i2c-switch@71 {
 130                 compatible = "nxp,pca9548";
 131                 #address-cells = <1>;
 132                 #size-cells = <0>;
 133                 reg = <0x71>;
 134                 reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 135
 136                 /* HDMIoSDA, HDMIoSCL */
 137                 i2c@4 {
 138                         #address-cells = <1>;
 139                         #size-cells = <0>;
 140                         reg = <4>;
 141
 142                         hdmi@3d {
 143                                 compatible = "adi,adv7513";
 144                                 reg = <0x3d>;
 145
 146                                 pinctrl-0 = <&hdmi1_pins>;
 147                                 pinctrl-names = "default";
 148
 149                                 interrupt-parent = <&gpio2>;
 150                                 interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 151
 152                                 clocks = <&cs2000>;
 153                                 clock-names = "cec";
 154
 155                                 pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>;
 156
 157                                 avdd-supply = <&hdmi_1v8>;
 158                                 dvdd-supply = <&hdmi_1v8>;
 159                                 pvdd-supply = <&hdmi_1v8>;
 160                                 dvdd-3v-supply = <&hdmi_3v3>;
 161                                 bgvdd-supply = <&hdmi_1v8>;
 162
 163                                 adi,input-depth = <8>;
 164                                 adi,input-colorspace = "rgb";
 165                                 adi,input-clock = "1x";
 166
 167                                 ports {
 168                                         #address-cells = <1>;
 169                                         #size-cells = <0>;
 170
 171                                         port@0 {
 172                                                 reg = <0>;
 173                                                 adv7513_in: endpoint {
 174                                                         remote-endpoint = <&du_out_rgb>;
 175                                                 };
 176                                         };
 177
 178                                         port@1 {
 179                                                 reg = <1>;
 180                                                 adv7513_out: endpoint {
 181                                                         remote-endpoint = <&hdmi1_con>;
 182                                                 };
 183                                         };
 184                                 };
 185                         };
 186                 };
 187
 188                 /* Audio_SDA, Audio_SCL */
 189                 i2c@7 {
 190                         #address-cells = <1>;
 191                         #size-cells = <0>;
 192                         reg = <7>;
 193
 194                         accelerometer@1d {
 195                                 compatible = "st,lsm9ds0-imu";
 196                                 reg = <0x1d>;
 197
 198                                 vdd-supply = <&accel_3v3>;
 199                                 vddio-supply = <&accel_3v3>;
 200                         };
 201
 202                         pcm3168a: audio-codec@44 {
 203                                 #sound-dai-cells = <0>;
 204                                 compatible = "ti,pcm3168a";
 205                                 reg = <0x44>;
 206                                 clocks = <&clksndsel>;
 207                                 clock-names = "scki";
 208
 209                                 VDD1-supply = <&snd_3p3v>;
 210                                 VDD2-supply = <&snd_3p3v>;
 211                                 VCCAD1-supply = <&snd_vcc5v>;
 212                                 VCCAD2-supply = <&snd_vcc5v>;
 213                                 VCCDA1-supply = <&snd_vcc5v>;
 214                                 VCCDA2-supply = <&snd_vcc5v>;
 215
 216                                 ports {
 217                                         #address-cells = <1>;
 218                                         #size-cells = <0>;
 219                                         mclk-fs = <512>;
 220                                         port@0 {
 221                                                 reg = <0>;
 222                                                 pcm3168a_endpoint_p: endpoint {
 223                                                         remote-endpoint = <&rsnd_for_pcm3168a_play>;
 224                                                         clocks = <&clksndsel>;
 225                                                 };
 226                                         };
 227                                         port@1 {
 228                                                 reg = <1>;
 229                                                 pcm3168a_endpoint_c: endpoint {
 230                                                         remote-endpoint = <&rsnd_for_pcm3168a_capture>;
 231                                                         clocks = <&clksndsel>;
 232                                                 };
 233                                         };
 234                                 };
 235                         };
 236
 237                         gyroscope@6b {
 238                                 compatible = "st,lsm9ds0-gyro";
 239                                 reg = <0x6b>;
 240
 241                                 vdd-supply = <&accel_3v3>;
 242                                 vddio-supply = <&accel_3v3>;
 243                         };
 244                 };
 245         };
 246
 247         /* U11 */
 248         gpio_exp_74: gpio@74 {
 249                 compatible = "ti,tca9539";
 250                 reg = <0x74>;
 251                 gpio-controller;
 252                 #gpio-cells = <2>;
 253                 interrupt-controller;
 254                 interrupt-parent = <&gpio6>;
 255                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 256
 257                 audio-out-off-hog {
 258                         gpio-hog;
 259                         gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
 260                         output-high;
 261                         line-name = "Audio_Out_OFF";
 262                 };
 263
 264                 hub-pwen-hog {
 265                         gpio-hog;
 266                         gpios = <6 GPIO_ACTIVE_HIGH>;
 267                         output-high;
 268                         line-name = "HUB pwen";
 269                 };
 270
 271                 hub-rst-hog {
 272                         gpio-hog;
 273                         gpios = <7 GPIO_ACTIVE_HIGH>;
 274                         output-high;
 275                         line-name = "HUB rst";
 276                 };
 277
 278                 otg-extlpn-hog {
 279                         gpio-hog;
 280                         gpios = <9 GPIO_ACTIVE_HIGH>;
 281                         output-high;
 282                         line-name = "OTG EXTLPn";
 283                 };
 284
 285                 otg-offvbusn-hog {
 286                         gpio-hog;
 287                         gpios = <8 GPIO_ACTIVE_HIGH>;
 288                         output-low;
 289                         line-name = "OTG OFFVBUSn";
 290                 };
 291
 292                 sd-wifi-mux-hog {
 293                         gpio-hog;
 294                         gpios = <5 GPIO_ACTIVE_HIGH>;
 295                         output-low;     /* Connect WL1837 */
 296                         line-name = "SD WiFi mux";
 297                 };
 298
 299                 snd-rst-hog {
 300                         gpio-hog;
 301                         gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
 302                         output-high;
 303                         line-name = "SND_RST";
 304                 };
 305         };
 306
 307         /* U5 */
 308         gpio_exp_75: gpio@75 {
 309                 compatible = "ti,tca9539";
 310                 reg = <0x75>;
 311                 gpio-controller;
 312                 #gpio-cells = <2>;
 313                 interrupt-controller;
 314                 interrupt-parent = <&gpio6>;
 315                 interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 316         };
 317 };
 318
 319 &i2c4 {
 320         i2cswitch4: i2c-switch@71 {
 321                 compatible = "nxp,pca9548";
 322                 #address-cells = <1>;
 323                 #size-cells = <0>;
 324                 reg = <0x71>;
 325                 reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
 326         };
 327
 328         gpio_exp_76: gpio@76 {
 329                 compatible = "ti,tca9539";
 330                 reg = <0x76>;
 331                 gpio-controller;
 332                 #gpio-cells = <2>;
 333                 interrupt-controller;
 334                 interrupt-parent = <&gpio7>;
 335                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 336         };
 337
 338         gpio_exp_77: gpio@77 {
 339                 compatible = "ti,tca9539";
 340                 reg = <0x77>;
 341                 gpio-controller;
 342                 #gpio-cells = <2>;
 343                 interrupt-controller;
 344                 interrupt-parent = <&gpio5>;
 345                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 346         };
 347 };
 348
 349 &ohci0 {
 350         dr_mode = "otg";
 351         status = "okay";
 352 };
 353
 354 &pcie_bus_clk {
 355         clock-frequency = <100000000>;
 356 };
 357
 358 &pciec0 {
 359         status = "okay";
 360 };
 361
 362 &pciec1 {
 363         status = "okay";
 364 };
 365
 366 &pfc {
 367         can0_pins: can0 {
 368                 groups = "can0_data_a";
 369                 function = "can0";
 370         };
 371
 372         can1_pins: can1 {
 373                 groups = "can1_data";
 374                 function = "can1";
 375         };
 376
 377         hdmi1_pins: hdmi1 {
 378                 adv7513-interrupt {
 379                         pins = "GP_2_14";
 380                         bias-pull-up;
 381                 };
 382
 383                 du {
 384                         groups = "du_rgb888", "du_sync", "du_clk_out_0",
 385                                  "du_disp";
 386                         function = "du";
 387                 };
 388         };
 389
 390         hscif0_pins: hscif0 {
 391                 groups = "hscif0_data", "hscif0_ctrl";
 392                 function = "hscif0";
 393         };
 394
 395         scif1_pins: scif1 {
 396                 groups = "scif1_data_b", "scif1_ctrl";
 397                 function = "scif1";
 398         };
 399
 400         sdhi3_pins: sdhi3 {
 401                 groups = "sdhi3_data4", "sdhi3_ctrl";
 402                 function = "sdhi3";
 403                 power-source = <3300>;
 404         };
 405
 406         sound_pcm_pins: sound-pcm {
 407                 groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
 408                 function = "ssi";
 409         };
 410
 411         usb0_pins: usb0 {
 412                 groups = "usb0";
 413                 function = "usb0";
 414         };
 415 };
 416
 417 &rcar_sound {
 418         pinctrl-0 = <&sound_pins
 419                      &sound_clk_pins
 420                      &sound_pcm_pins>;
 421
 422         ports {
 423                 /* rsnd_port0/1 are defined in ulcb.dtsi */
 424                 rsnd_port2: port@2 {
 425                         reg = <2>;
 426                         rsnd_for_pcm3168a_play: endpoint {
 427                                 remote-endpoint = <&pcm3168a_endpoint_p>;
 428                                 bitclock-master;
 429                                 frame-master;
 430                                 dai-tdm-slot-num = <8>;
 431                                 playback = <&ssi3>;
 432                         };
 433                 };
 434                 rsnd_port3: port@3 {
 435                         reg = <3>;
 436                         rsnd_for_pcm3168a_capture: endpoint {
 437                                 remote-endpoint = <&pcm3168a_endpoint_c>;
 438                                 bitclock-master;
 439                                 frame-master;
 440                                 dai-tdm-slot-num = <6>;
 441                                 capture = <&ssi4>;
 442                         };
 443                 };
 444         };
 445 };
 446
 447 &scif1 {
 448         pinctrl-0 = <&scif1_pins>;
 449         pinctrl-names = "default";
 450         uart-has-rtscts;
 451
 452         status = "okay";
 453 };
 454
 455 &sdhi3 {
 456         pinctrl-0 = <&sdhi3_pins>;
 457         pinctrl-names = "default";
 458
 459         vmmc-supply = <&wlan_en>;
 460         vqmmc-supply = <&wlan_en>;
 461         bus-width = <4>;
 462         no-1-8-v;
 463         non-removable;
 464         cap-power-off-card;
 465         keep-power-in-suspend;
 466         max-frequency = <26000000>;
 467         status = "okay";
 468
 469         #address-cells = <1>;
 470         #size-cells = <0>;
 471         wlcore: wlcore@2 {
 472                 compatible = "ti,wl1837";
 473                 reg = <2>;
 474                 interrupt-parent = <&gpio1>;
 475                 interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
 476         };
 477 };
 478
 479 &sound_card {
 480         links = <&rsnd_port0    /* ak4613 */
 481                  &rsnd_port1    /* HDMI0  */
 482                  &rsnd_port2    /* pcm3168a playback */
 483                  &rsnd_port3    /* pcm3168a capture  */
 484                 >;
 485 };
 486
 487 &ssi4 {
 488         shared-pin;
 489 };
 490
 491 &usb2_phy0 {
 492         pinctrl-0 = <&usb0_pins>;
 493         pinctrl-names = "default";
 494
 495         status = "okay";
 496 };
 497
 498 &xhci0 {
 499         status = "okay";
 500 };