arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2020, Compass Electronics Group, LLC
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/clk/versaclock.h>
   9
  10 / {
  11         backlight_lvds: backlight-lvds {
  12                 compatible = "pwm-backlight";
  13                 power-supply = <&reg_lcd>;
  14                 enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
  15                 pwms = <&pwm2 0 25000>;
  16                 brightness-levels = <0 4 8 16 32 64 128 255>;
  17                 default-brightness-level = <6>;
  18         };
  19
  20         backlight_dpi: backlight-dpi {
  21                 compatible = "pwm-backlight";
  22                 power-supply = <&reg_lcd>;
  23                 enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
  24                 pwms = <&pwm0 0 25000>;
  25                 brightness-levels = <0 25 33 50 63 75 88 100>;
  26                 default-brightness-level = <6>;
  27         };
  28
  29         hdmi0-out {
  30                 compatible = "hdmi-connector";
  31                 type = "a";
  32
  33                 port {
  34                         hdmi0_con: endpoint {
  35                                 remote-endpoint = <&rcar_dw_hdmi0_out>;
  36                         };
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 key-1 { /* S19 */
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_UP>;
  46                         label = "Up";
  47                         wakeup-source;
  48                         debounce-interval = <20>;
  49                 };
  50                 key-2 { /*S20 */
  51                         gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_LEFT>;
  53                         label = "Left";
  54                         wakeup-source;
  55                         debounce-interval = <20>;
  56                 };
  57                 key-3 { /* S21 */
  58                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_DOWN>;
  60                         label = "Down";
  61                         wakeup-source;
  62                         debounce-interval = <20>;
  63                 };
  64                 key-4 { /* S22 */
  65                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RIGHT>;
  67                         label = "Right";
  68                         wakeup-source;
  69                         debounce-interval = <20>;
  70                 };
  71                 key-5 { /* S23 */
  72                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_ENTER>;
  74                         label = "Center";
  75                         wakeup-source;
  76                         debounce-interval = <20>;
  77                 };
  78         };
  79
  80         leds {
  81                 compatible = "gpio-leds";
  82                 pinctrl-0 = <&led_pins>;
  83                 pinctrl-names = "default";
  84
  85                 led0 {
  86                         gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
  87                         label = "LED0";
  88                         linux,default-trigger = "heartbeat";
  89                 };
  90                 led1 {
  91                         gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
  92                         label = "LED1";
  93                 };
  94                 led2 {
  95                         gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
  96                         label = "LED2";
  97                 };
  98                 led3 {
  99                         gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
 100                         label = "LED3";
 101                 };
 102         };
 103
 104         lvds {
 105                 compatible = "panel-lvds";
 106                 power-supply = <&reg_lcd_reset>;
 107                 width-mm = <223>;
 108                 height-mm = <125>;
 109                 backlight = <&backlight_lvds>;
 110                 data-mapping = "vesa-24";
 111
 112                 panel-timing {
 113                         /* 800x480@60Hz */
 114                         clock-frequency = <30000000>;
 115                         hactive = <800>;
 116                         vactive = <480>;
 117                         hsync-len = <48>;
 118                         hfront-porch = <40>;
 119                         hback-porch = <40>;
 120                         vfront-porch = <13>;
 121                         vback-porch = <29>;
 122                         vsync-len = <1>;
 123                         hsync-active = <1>;
 124                         vsync-active = <3>;
 125                         de-active = <1>;
 126                         pixelclk-active = <0>;
 127                 };
 128
 129                 port {
 130                         panel_in: endpoint {
 131                                 remote-endpoint = <&lvds0_out>;
 132                         };
 133                 };
 134         };
 135
 136         rgb {
 137                 /* Different LCD with compatible timings */
 138                 compatible = "rocktech,rk070er9427";
 139                 backlight = <&backlight_dpi>;
 140                 enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 141                 power-supply = <&reg_lcd>;
 142                 port {
 143                         rgb_panel: endpoint {
 144                                 remote-endpoint = <&du_out_rgb>;
 145                         };
 146                 };
 147         };
 148
 149         reg_audio: regulator-audio {
 150                 compatible = "regulator-fixed";
 151                 regulator-name = "audio-1.8V";
 152                 regulator-min-microvolt = <1800000>;
 153                 regulator-max-microvolt = <1800000>;
 154                 gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
 155                 enable-active-high;
 156         };
 157
 158         reg_lcd: regulator-lcd {
 159                 compatible = "regulator-fixed";
 160                 regulator-name = "lcd_panel_pwr";
 161                 regulator-min-microvolt = <3300000>;
 162                 regulator-max-microvolt = <3300000>;
 163                 gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
 164                 enable-active-high;
 165         };
 166
 167         reg_lcd_reset: regulator-lcd-reset {
 168                 compatible = "regulator-fixed";
 169                 regulator-name = "nLCD_RESET";
 170                 regulator-min-microvolt = <3300000>;
 171                 regulator-max-microvolt = <3300000>;
 172                 gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174                 vin-supply = <&reg_lcd>;
 175         };
 176
 177         reg_cam0: regulator-cam0 {
 178                 compatible = "regulator-fixed";
 179                 regulator-name = "reg_cam0";
 180                 regulator-min-microvolt = <1800000>;
 181                 regulator-max-microvolt = <1800000>;
 182                 gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
 183                 enable-active-high;
 184         };
 185
 186         reg_cam1: regulator-cam1 {
 187                 compatible = "regulator-fixed";
 188                 regulator-name = "reg_cam1";
 189                 regulator-min-microvolt = <1800000>;
 190                 regulator-max-microvolt = <1800000>;
 191                 gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
 192                 enable-active-high;
 193                 startup-delay-us = <100000>;
 194         };
 195
 196         sound_card {
 197                 compatible = "audio-graph-card";
 198                 label = "rcar-sound";
 199                 dais = <&rsnd_port0>, <&rsnd_port1>;
 200                 widgets = "Microphone", "Mic Jack",
 201                           "Line", "Line In Jack",
 202                           "Headphone", "Headphone Jack";
 203                 mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
 204                 routing = "Headphone Jack", "HPOUTL",
 205                          "Headphone Jack", "HPOUTR",
 206                          "IN3R", "MICBIAS",
 207                          "Mic Jack", "IN3R";
 208         };
 209
 210         vccq_sdhi0: regulator-vccq-sdhi0 {
 211                 compatible = "regulator-gpio";
 212                 regulator-name = "SDHI0 VccQ";
 213                 regulator-min-microvolt = <1800000>;
 214                 regulator-max-microvolt = <3300000>;
 215                 gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 216                 gpios-states = <1>;
 217                 states = <3300000 1>, <1800000 0>;
 218         };
 219
 220         /* External DU dot clocks */
 221         x302_clk: x302-clock {
 222                 compatible = "fixed-clock";
 223                 #clock-cells = <0>;
 224                 clock-frequency = <33000000>;
 225         };
 226
 227         x304_clk: x304-clock {
 228                 compatible = "fixed-clock";
 229                 #clock-cells = <0>;
 230                 clock-frequency = <25000000>;
 231         };
 232
 233         connector {
 234                 compatible = "usb-c-connector";
 235                 label = "USB-C";
 236                 data-role = "dual";
 237
 238                 ports {
 239                         #address-cells = <1>;
 240                         #size-cells = <0>;
 241                         port@0 {
 242                                 reg = <0>;
 243                                 hs_ep: endpoint {
 244                                         remote-endpoint = <&usb3_hs_ep>;
 245                                 };
 246                         };
 247                         port@1 {
 248                                 reg = <1>;
 249                                 ss_ep: endpoint {
 250                                         remote-endpoint = <&hd3ss3220_in_ep>;
 251                                 };
 252                         };
 253                 };
 254         };
 255 };
 256
 257 &audio_clk_b {
 258         clock-frequency = <22579200>;
 259 };
 260
 261 &can0 {
 262         pinctrl-0 = <&can0_pins>;
 263         pinctrl-names = "default";
 264         renesas,can-clock-select = <0x0>;
 265         status = "okay";
 266 };
 267
 268 &can1 {
 269         pinctrl-0 = <&can1_pins>;
 270         pinctrl-names = "default";
 271         renesas,can-clock-select = <0x0>;
 272         status = "okay";
 273 };
 274
 275 &du {
 276         ports {
 277                 port@0 {
 278                         du_out_rgb: endpoint {
 279                                 remote-endpoint = <&rgb_panel>;
 280                         };
 281                 };
 282         };
 283 };
 284
 285 &ehci0 {
 286         dr_mode = "otg";
 287         status = "okay";
 288         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 289 };
 290
 291 &ehci1 {
 292         status = "okay";
 293         clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 294 };
 295
 296 &hdmi0 {
 297         status = "okay";
 298         ports {
 299                 #address-cells = <1>;
 300                 #size-cells = <0>;
 301                 port@0 {
 302                         reg = <0>;
 303                         dw_hdmi0_in: endpoint {
 304                                 remote-endpoint = <&du_out_hdmi0>;
 305                         };
 306                 };
 307                 port@1 {
 308                         reg = <1>;
 309                         rcar_dw_hdmi0_out: endpoint {
 310                                 remote-endpoint = <&hdmi0_con>;
 311                         };
 312                 };
 313                 port@2 {
 314                         reg = <2>;
 315                         dw_hdmi0_snd_in: endpoint {
 316                                 remote-endpoint = <&rsnd_endpoint1>;
 317                         };
 318                 };
 319         };
 320 };
 321
 322 &hscif1 {
 323         pinctrl-0 = <&hscif1_pins>;
 324         pinctrl-names = "default";
 325         uart-has-rtscts;
 326         status = "okay";
 327 };
 328
 329 &hsusb {
 330         dr_mode = "otg";
 331         status = "okay";
 332 };
 333
 334 &i2c2 {
 335         status = "okay";
 336         clock-frequency = <400000>;
 337         pinctrl-0 = <&i2c2_pins>;
 338         pinctrl-names = "default";
 339
 340         gpio_exp2: gpio@21 {
 341                 compatible = "onnn,pca9654";
 342                 reg = <0x21>;
 343                 gpio-controller;
 344                 #gpio-cells = <2>;
 345         };
 346
 347         gpio_exp3: gpio@22 {
 348                 compatible = "onnn,pca9654";
 349                 reg = <0x22>;
 350                 gpio-controller;
 351                 #gpio-cells = <2>;
 352         };
 353
 354         gpio_exp4: gpio@23 {
 355                 compatible = "onnn,pca9654";
 356                 reg = <0x23>;
 357                 gpio-controller;
 358                 #gpio-cells = <2>;
 359         };
 360
 361         versaclock6_bb: clock-controller@6a {
 362                 compatible = "idt,5p49v6965";
 363                 reg = <0x6a>;
 364                 #clock-cells = <1>;
 365                 clocks = <&x304_clk>;
 366                 clock-names = "xin";
 367
 368                 assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
 369                                   <&versaclock6_bb 3>, <&versaclock6_bb 4>;
 370                 assigned-clock-rates = <24000000>, <24000000>, <24000000>,
 371                                        <24576000>;
 372
 373                 OUT1 {
 374                         idt,mode = <VC5_CMOS>;
 375                         idt,voltage-microvolt = <1800000>;
 376                         idt,slew-percent = <100>;
 377                 };
 378
 379                 OUT2 {
 380                         idt,mode = <VC5_CMOS>;
 381                         idt,voltage-microvolt = <1800000>;
 382                         idt,slew-percent = <100>;
 383                 };
 384
 385                 OUT3 {
 386                         idt,mode = <VC5_CMOS>;
 387                         idt,voltage-microvolt = <3300000>;
 388                         idt,slew-percent = <100>;
 389                 };
 390
 391                 OUT4 {
 392                         idt,mode = <VC5_CMOS>;
 393                         idt,voltage-microvolt = <3300000>;
 394                         idt,slew-percent = <100>;
 395                 };
 396         };
 397 };
 398
 399 &i2c0 {
 400         status = "okay";
 401         clock-frequency = <400000>;
 402
 403         pinctrl-0 = <&i2c0_pins>;
 404         pinctrl-names = "default";
 405 };
 406
 407 &i2c5 {
 408         status = "okay";
 409         clock-frequency = <400000>;
 410         pinctrl-0 = <&i2c5_pins>;
 411         pinctrl-names = "default";
 412
 413         codec: wm8962@1a {
 414                 compatible = "wlf,wm8962";
 415                 reg = <0x1a>;
 416                 clocks = <&versaclock6_bb 3>;
 417                 DCVDD-supply = <&reg_audio>;
 418                 DBVDD-supply = <&reg_audio>;
 419                 AVDD-supply = <&reg_audio>;
 420                 CPVDD-supply = <&reg_audio>;
 421                 MICVDD-supply = <&reg_audio>;
 422                 PLLVDD-supply = <&reg_audio>;
 423                 SPKVDD1-supply = <&reg_audio>;
 424                 SPKVDD2-supply = <&reg_audio>;
 425                 gpio-cfg = <
 426                         0x0000 /* 0:Default */
 427                         0x0000 /* 1:Default */
 428                         0x0000 /* 2:Default */
 429                         0x0000 /* 3:Default */
 430                         0x0000 /* 4:Default */
 431                         0x0000 /* 5:Default */
 432                 >;
 433                 port {
 434                         wm8962_endpoint: endpoint {
 435                                 remote-endpoint = <&rsnd_endpoint0>;
 436                         };
 437                 };
 438         };
 439
 440         /* 0 - lcd_reset */
 441         /* 1 - lcd_pwr */
 442         /* 2 - lcd_select */
 443         /* 3 - backlight-enable */
 444         /* 4 - Touch_shdwn */
 445         /* 5 - LCD_H_pol */
 446         /* 6 - lcd_V_pol */
 447         gpio_exp1: gpio@20 {
 448                 compatible = "onnn,pca9654";
 449                 reg = <0x20>;
 450                 gpio-controller;
 451                 #gpio-cells = <2>;
 452         };
 453
 454         touchscreen@26 {
 455                 compatible = "ilitek,ili2117";
 456                 reg = <0x26>;
 457                 interrupt-parent = <&gpio5>;
 458                 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
 459                 wakeup-source;
 460         };
 461
 462         hd3ss3220@47 {
 463                 compatible = "ti,hd3ss3220";
 464                 reg = <0x47>;
 465                 interrupt-parent = <&gpio6>;
 466                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 467
 468                 ports {
 469                         #address-cells = <1>;
 470                         #size-cells = <0>;
 471                         port@0 {
 472                                 reg = <0>;
 473                                 hd3ss3220_in_ep: endpoint {
 474                                         remote-endpoint = <&ss_ep>;
 475                                 };
 476                         };
 477                         port@1 {
 478                                 reg = <1>;
 479                                 hd3ss3220_out_ep: endpoint {
 480                                         remote-endpoint = <&usb3_role_switch>;
 481                                 };
 482                         };
 483                 };
 484         };
 485 };
 486
 487 &lvds0 {
 488         status = "okay";
 489
 490         ports {
 491                 port@1 {
 492                         lvds0_out: endpoint {
 493                                 remote-endpoint = <&panel_in>;
 494                         };
 495                 };
 496         };
 497 };
 498
 499 &msiof1 {
 500         pinctrl-0 = <&msiof1_pins>;
 501         pinctrl-names = "default";
 502         status = "okay";
 503         cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
 504 };
 505
 506 &ohci0 {
 507         dr_mode = "otg";
 508         status = "okay";
 509 };
 510
 511 &ohci1 {
 512         status = "okay";
 513 };
 514
 515 &pciec0 {
 516         status = "okay";
 517 };
 518
 519 &pciec1 {
 520         status = "okay";
 521 };
 522
 523 &pcie_bus_clk {
 524         clock-frequency = <100000000>;
 525 };
 526
 527 &pfc {
 528         can0_pins: can0 {
 529                 groups = "can0_data_a";
 530                 function = "can0";
 531         };
 532
 533         can1_pins: can1 {
 534                 groups = "can1_data";
 535                 function = "can1";
 536         };
 537
 538         du_pins: du {
 539                 groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
 540                 function = "du";
 541         };
 542
 543         i2c2_pins: i2c2 {
 544                 groups = "i2c2_a";
 545                 function = "i2c2";
 546         };
 547
 548         i2c5_pins: i2c5 {
 549                 groups = "i2c5";
 550                 function = "i2c5";
 551         };
 552
 553         led_pins: leds {
 554                 /* GP_0_4 , AVS1, AVS2, GP_7_3 */
 555                 pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
 556                 bias-pull-down;
 557         };
 558
 559         msiof1_pins: msiof1 {
 560                 groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
 561                 function = "msiof1";
 562         };
 563
 564         pwm0_pins: pwm0 {
 565                 groups = "pwm0";
 566                 function = "pwm0";
 567         };
 568
 569         pwm2_pins: pwm2 {
 570                 groups = "pwm2_a";
 571                 function = "pwm2";
 572         };
 573
 574         sdhi0_pins: sd0 {
 575                 groups = "sdhi0_data4", "sdhi0_ctrl";
 576                 function = "sdhi0";
 577                 power-source = <3300>;
 578         };
 579
 580         sdhi0_pins_uhs: sd0_uhs {
 581                 groups = "sdhi0_data4", "sdhi0_ctrl";
 582                 function = "sdhi0";
 583                 power-source = <1800>;
 584         };
 585
 586         sound_pins: sound {
 587                 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 588                 function = "ssi";
 589         };
 590
 591         sound_clk_pins: sound_clk {
 592                 groups = "audio_clk_a_a", "audio_clk_b_a";
 593                 function = "audio_clk";
 594         };
 595
 596         usb0_pins: usb0 {
 597                 mux {
 598                         groups = "usb0";
 599                         function = "usb0";
 600                 };
 601         };
 602
 603         usb1_pins: usb1 {
 604                 mux {
 605                         groups = "usb1";
 606                         function = "usb1";
 607                 };
 608         };
 609
 610         usb30_pins: usb30 {
 611                 mux {
 612                         groups = "usb30";
 613                         function = "usb30";
 614                 };
 615         };
 616 };
 617
 618 &pwm0 {
 619         pinctrl-0 = <&pwm0_pins>;
 620         pinctrl-names = "default";
 621         status = "okay";
 622 };
 623
 624 &pwm2 {
 625         pinctrl-0 = <&pwm2_pins>;
 626         pinctrl-names = "default";
 627         status = "okay";
 628 };
 629
 630 &rcar_sound {
 631         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 632         pinctrl-names = "default";
 633
 634         /* Single DAI */
 635         #sound-dai-cells = <0>;
 636
 637         /* audio_clkout0/1/2/3 */
 638         #clock-cells = <1>;
 639         clock-frequency = <11289600>;
 640
 641         status = "okay";
 642
 643         ports {
 644                 #address-cells = <1>;
 645                 #size-cells = <0>;
 646                 rsnd_port0: port@0 {
 647                         reg = <0>;
 648                         rsnd_endpoint0: endpoint {
 649                                 remote-endpoint = <&wm8962_endpoint>;
 650
 651                                 dai-format = "i2s";
 652                                 bitclock-master = <&rsnd_endpoint0>;
 653                                 frame-master = <&rsnd_endpoint0>;
 654
 655                                 playback = <&ssi1>, <&dvc1>, <&src1>;
 656                                 capture = <&ssi0>;
 657                         };
 658                 };
 659                 rsnd_port1: port@1 {
 660                     reg = <0x01>;
 661                         rsnd_endpoint1: endpoint {
 662                                 remote-endpoint = <&dw_hdmi0_snd_in>;
 663
 664                                 dai-format = "i2s";
 665                                 bitclock-master = <&rsnd_endpoint1>;
 666                                 frame-master = <&rsnd_endpoint1>;
 667
 668                                 playback = <&ssi2>;
 669                         };
 670                 };
 671         };
 672 };
 673
 674 &rwdt {
 675         status = "okay";
 676         timeout-sec = <60>;
 677 };
 678
 679 &scif0 {
 680         pinctrl-0 = <&scif0_pins>;
 681         pinctrl-names = "default";
 682         status = "okay";
 683 };
 684
 685 &scif5 {
 686         pinctrl-0 = <&scif5_pins>;
 687         pinctrl-names = "default";
 688         status = "okay";
 689 };
 690
 691 &scif_clk {
 692         clock-frequency = <14745600>;
 693 };
 694
 695 &sdhi0 {
 696         pinctrl-0 = <&sdhi0_pins>;
 697         pinctrl-1 = <&sdhi0_pins_uhs>;
 698         pinctrl-names = "default", "state_uhs";
 699         vmmc-supply = <&reg_3p3v>;
 700         vqmmc-supply = <&vccq_sdhi0>;
 701         cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 702         bus-width = <4>;
 703         sd-uhs-sdr50;
 704         sd-uhs-sdr104;
 705         status = "okay";
 706 };
 707
 708 &ssi1 {
 709         shared-pin;
 710 };
 711
 712 &tmu0 {
 713         status = "okay";
 714 };
 715
 716 &tmu1 {
 717         status = "okay";
 718 };
 719
 720 &tmu2 {
 721         status = "okay";
 722 };
 723
 724 &tmu3 {
 725         status = "okay";
 726 };
 727
 728 &tmu4 {
 729         status = "okay";
 730 };
 731
 732 &usb2_phy0 {
 733         pinctrl-0 = <&usb0_pins>;
 734         pinctrl-names = "default";
 735         status = "okay";
 736 };
 737
 738 &usb2_phy1 {
 739         pinctrl-0 = <&usb1_pins>;
 740         pinctrl-names = "default";
 741         status = "okay";
 742 };
 743
 744 &usb3_peri0 {
 745         companion = <&xhci0>;
 746         status = "okay";
 747         usb-role-switch;
 748
 749         ports {
 750                 #address-cells = <1>;
 751                 #size-cells = <0>;
 752                 port@0 {
 753                         reg = <0>;
 754                         usb3_hs_ep: endpoint {
 755                                 remote-endpoint = <&hs_ep>;
 756                         };
 757                 };
 758                 port@1 {
 759                         reg = <1>;
 760                         usb3_role_switch: endpoint {
 761                                 remote-endpoint = <&hd3ss3220_out_ep>;
 762                         };
 763                 };
 764         };
 765 };
 766
 767 &usb3_phy0 {
 768         status = "okay";
 769 };
 770
 771 &vin0 {
 772         status = "okay";
 773 };
 774 &vin1 {
 775         status = "okay";
 776 };
 777 &vin2 {
 778         status = "okay";
 779 };
 780 &vin3 {
 781         status = "okay";
 782 };
 783 &vin4 {
 784         status = "okay";
 785 };
 786 &vin5 {
 787         status = "okay";
 788 };
 789 &vin6 {
 790         status = "okay";
 791 };
 792 &vin7 {
 793         status = "okay";
 794 };
 795
 796 &xhci0
 797 {
 798         pinctrl-0 = <&usb30_pins>;
 799         pinctrl-names = "default";
 800         status = "okay";
 801 };