arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   7 #include "sm8250.dtsi"
   8 #include "pm8150.dtsi"
   9 #include "pm8150b.dtsi"
  10 #include "pm8150l.dtsi"
  11 #include "pm8009.dtsi"
  12
  13 /delete-node/ &adsp_mem;
  14 /delete-node/ &spss_mem;
  15 /delete-node/ &cdsp_secure_heap;
  16
  17 / {
  18         qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
  19         qcom,board-id = <0x10008 0>;
  20
  21         chosen {
  22                 #address-cells = <2>;
  23                 #size-cells = <2>;
  24                 ranges;
  25
  26                 framebuffer: framebuffer@9c000000 {
  27                         compatible = "simple-framebuffer";
  28                         reg = <0 0x9c000000 0 0x2300000>;
  29                         width = <1644>;
  30                         height = <3840>;
  31                         stride = <(1644 * 4)>;
  32                         format = "a8r8g8b8";
  33                         /*
  34                          * That's a lot of clocks, but it's necessary due
  35                          * to unused clk cleanup & no panel driver yet..
  36                          */
  37                         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
  38                                  <&gcc GCC_DISP_HF_AXI_CLK>,
  39                                  <&gcc GCC_DISP_SF_AXI_CLK>,
  40                                  <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
  41                                  <&dispcc DISP_CC_MDSS_MDP_CLK>,
  42                                  <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
  43                                  <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
  44                                  <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
  45                                  <&dispcc DISP_CC_MDSS_ESC0_CLK>;
  46                         power-domains = <&dispcc MDSS_GDSC>;
  47                 };
  48         };
  49
  50         gpio_keys: gpio-keys {
  51                 compatible = "gpio-keys";
  52
  53                 /*
  54                  * Camera focus (light press) and camera snapshot (full press)
  55                  * seem not to work properly.. Adding the former one stalls the CPU
  56                  * and the latter kills the volume down key for whatever reason. In any
  57                  * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
  58                  */
  59
  60                 key-vol-down {
  61                         label = "Volume Down";
  62                         linux,code = <KEY_VOLUMEDOWN>;
  63                         gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
  64                         debounce-interval = <15>;
  65                         linux,can-disable;
  66                         gpio-key,wakeup;
  67                 };
  68         };
  69
  70         vph_pwr: vph-pwr-regulator {
  71                 compatible = "regulator-fixed";
  72                 regulator-name = "vph_pwr";
  73                 regulator-min-microvolt = <3700000>;
  74                 regulator-max-microvolt = <3700000>;
  75         };
  76
  77         /* S6c is really ebi.lvl but it's there for supply map completeness sake. */
  78         vreg_s6c_0p88: smpc6-regulator {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "vreg_s6c_0p88";
  81
  82                 regulator-min-microvolt = <880000>;
  83                 regulator-max-microvolt = <880000>;
  84                 regulator-always-on;
  85                 vin-supply = <&vph_pwr>;
  86         };
  87
  88         reserved-memory {
  89                 adsp_mem: memory@8a100000 {
  90                         reg = <0x0 0x8a100000 0x0 0x2500000>;
  91                         no-map;
  92                 };
  93
  94                 spss_mem: memory@8c600000 {
  95                         reg = <0x0 0x8c600000 0x0 0x100000>;
  96                         no-map;
  97                 };
  98
  99                 cdsp_secure_heap: memory@8c700000 {
 100                         reg = <0x0 0x8c700000 0x0 0x4600000>;
 101                         no-map;
 102                 };
 103
 104                 cont_splash_mem: memory@9c000000 {
 105                         reg = <0x0 0x9c000000 0x0 0x2300000>;
 106                         no-map;
 107                 };
 108
 109                 ramoops@ffc00000 {
 110                         compatible = "ramoops";
 111                         reg = <0x0 0xffc00000 0x0 0x100000>;
 112                         record-size = <0x1000>;
 113                         console-size = <0x40000>;
 114                         msg-size = <0x20000 0x20000>;
 115                         ecc-size = <16>;
 116                         no-map;
 117                 };
 118         };
 119 };
 120
 121 &adsp {
 122         status = "okay";
 123 };
 124
 125 &apps_rsc {
 126         pm8150-rpmh-regulators {
 127                 compatible = "qcom,pm8150-rpmh-regulators";
 128                 qcom,pmic-id = "a";
 129
 130                 vdd-s1-supply = <&vph_pwr>;
 131                 vdd-s2-supply = <&vph_pwr>;
 132                 vdd-s3-supply = <&vph_pwr>;
 133                 vdd-s4-supply = <&vph_pwr>;
 134                 vdd-s5-supply = <&vph_pwr>;
 135                 vdd-s6-supply = <&vph_pwr>;
 136                 vdd-s7-supply = <&vph_pwr>;
 137                 vdd-s8-supply = <&vph_pwr>;
 138                 vdd-s9-supply = <&vph_pwr>;
 139                 vdd-s10-supply = <&vph_pwr>;
 140                 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
 141                 vdd-l2-l10-supply = <&vreg_bob>;
 142                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
 143                 vdd-l6-l9-supply = <&vreg_s8c_1p2>;
 144                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 145                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 146
 147                 /* (S1+S2+S3) - cx.lvl (ARC) */
 148
 149                 vreg_s4a_1p8: smps4 {
 150                         regulator-name = "vreg_s4a_1p8";
 151                         regulator-min-microvolt = <1800000>;
 152                         regulator-max-microvolt = <1920000>;
 153                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 154                 };
 155
 156                 vreg_s5a_1p9: smps5 {
 157                         regulator-name = "vreg_s5a_1p9";
 158                         regulator-min-microvolt = <1824000>;
 159                         regulator-max-microvolt = <2040000>;
 160                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 161                 };
 162
 163                 vreg_s6a_0p6: smps6 {
 164                         regulator-name = "vreg_s6a_0p6";
 165                         regulator-min-microvolt = <600000>;
 166                         regulator-max-microvolt = <1128000>;
 167                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 168                 };
 169
 170                 vreg_l2a_3p1: ldo2 {
 171                         regulator-name = "vreg_l2a_3p1";
 172                         regulator-min-microvolt = <3072000>;
 173                         regulator-max-microvolt = <3072000>;
 174                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 175                 };
 176
 177                 vreg_l3a_0p9: ldo3 {
 178                         regulator-name = "vreg_l3a_0p9";
 179                         regulator-min-microvolt = <928000>;
 180                         regulator-max-microvolt = <932000>;
 181                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 182                 };
 183
 184                 /* L4 - lmx.lvl (ARC) */
 185
 186                 vreg_l5a_0p88: ldo5 {
 187                         regulator-name = "vreg_l5a_0p88";
 188                         regulator-min-microvolt = <880000>;
 189                         regulator-max-microvolt = <880000>;
 190                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 191                 };
 192
 193                 vreg_l6a_1p2: ldo6 {
 194                         regulator-name = "vreg_l6a_1p2";
 195                         regulator-min-microvolt = <1200000>;
 196                         regulator-max-microvolt = <1200000>;
 197                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 198                 };
 199
 200                 /* L7 is unused. */
 201
 202                 vreg_l9a_1p2: ldo9 {
 203                         regulator-name = "vreg_l9a_1p2";
 204                         regulator-min-microvolt = <1200000>;
 205                         regulator-max-microvolt = <1200000>;
 206                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 207                 };
 208
 209                 /* L10 is unused, L11 - lcx.lvl (ARC) */
 210
 211                 vreg_l12a_1p8: ldo12 {
 212                         regulator-name = "vreg_l12a_1p8";
 213                         regulator-min-microvolt = <1800000>;
 214                         regulator-max-microvolt = <1800000>;
 215                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 216                 };
 217
 218                 /* L13 is unused. */
 219
 220                 vreg_l14a_1p8: ldo14 {
 221                         regulator-name = "vreg_l14a_1p8";
 222                         regulator-min-microvolt = <1800000>;
 223                         regulator-max-microvolt = <1880000>;
 224                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 225                 };
 226
 227                 /* L15 & L16 are unused. */
 228
 229                 vreg_l17a_3p0: ldo17 {
 230                         regulator-name = "vreg_l17a_3p0";
 231                         regulator-min-microvolt = <2496000>;
 232                         regulator-max-microvolt = <3008000>;
 233                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 234                 };
 235
 236                 vreg_l18a_0p9: ldo18 {
 237                         regulator-name = "vreg_l18a_0p9";
 238                         regulator-min-microvolt = <800000>;
 239                         regulator-max-microvolt = <920000>;
 240                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 241                 };
 242         };
 243
 244         /*
 245          * Remaining regulators that are not yet supported:
 246          * OLEDB: 4925000-8100000
 247          * ab: 4600000-6100000
 248          * ibb: 800000-5400000
 249          */
 250         pm8150l-rpmh-regulators {
 251                 compatible = "qcom,pm8150l-rpmh-regulators";
 252                 qcom,pmic-id = "c";
 253
 254                 vdd-s1-supply = <&vph_pwr>;
 255                 vdd-s2-supply = <&vph_pwr>;
 256                 vdd-s3-supply = <&vph_pwr>;
 257                 vdd-s4-supply = <&vph_pwr>;
 258                 vdd-s5-supply = <&vph_pwr>;
 259                 vdd-s6-supply = <&vph_pwr>;
 260                 vdd-s7-supply = <&vph_pwr>;
 261                 vdd-s8-supply = <&vph_pwr>;
 262                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 263                 vdd-l2-l3-supply = <&vreg_s8c_1p2>;
 264                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 265                 vdd-l7-l11-supply = <&vreg_bob>;
 266                 vdd-l9-l10-supply = <&vreg_bob>;
 267                 vdd-bob-supply = <&vph_pwr>;
 268
 269                 vreg_bob: bob {
 270                         regulator-name = "vreg_bob";
 271                         regulator-min-microvolt = <3350000>;
 272                         regulator-max-microvolt = <3960000>;
 273                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 274                 };
 275
 276                 /*
 277                  * S1-S6 are ARCs:
 278                  * (S1+S2) - gfx.lvl,
 279                  * S3 - mx.lvl,
 280                  * (S4+S5) - mmcx.lvl,
 281                  * S6 - ebi.lvl
 282                  */
 283
 284                 vreg_s7c_0p35: smps7 {
 285                         regulator-name = "vreg_s7c_0p35";
 286                         regulator-min-microvolt = <348000>;
 287                         regulator-max-microvolt = <1000000>;
 288                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 289                 };
 290
 291                 vreg_s8c_1p2: smps8 {
 292                         regulator-name = "vreg_s8c_1p2";
 293                         regulator-min-microvolt = <1200000>;
 294                         regulator-max-microvolt = <1400000>;
 295                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 296                 };
 297
 298                 vreg_l1c_1p8: ldo1 {
 299                         regulator-name = "vreg_l1c_1p8";
 300                         regulator-min-microvolt = <1800000>;
 301                         regulator-max-microvolt = <1800000>;
 302                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 303                 };
 304
 305                 /* L2-4 are unused. */
 306
 307                 vreg_l5c_1p8: ldo5 {
 308                         regulator-name = "vreg_l5c_1p8";
 309                         regulator-min-microvolt = <1800000>;
 310                         regulator-max-microvolt = <2800000>;
 311                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 312                 };
 313
 314                 vreg_l6c_2p9: ldo6 {
 315                         regulator-name = "vreg_l6c_2p9";
 316                         regulator-min-microvolt = <1800000>;
 317                         regulator-max-microvolt = <2960000>;
 318                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 319                         regulator-allow-set-load;
 320                         regulator-allowed-modes =
 321                             <RPMH_REGULATOR_MODE_LPM
 322                              RPMH_REGULATOR_MODE_HPM>;
 323                 };
 324
 325                 vreg_l7c_2p85: ldo7 {
 326                         regulator-name = "vreg_l7c_2p85";
 327                         regulator-min-microvolt = <2856000>;
 328                         regulator-max-microvolt = <3104000>;
 329                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 330                 };
 331
 332                 vreg_l8c_1p8: ldo8 {
 333                         regulator-name = "vreg_l8c_1p8";
 334                         regulator-min-microvolt = <1800000>;
 335                         regulator-max-microvolt = <1800000>;
 336                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 337                 };
 338
 339                 vreg_l9c_2p9: ldo9 {
 340                         regulator-name = "vreg_l9c_2p9";
 341                         regulator-min-microvolt = <2704000>;
 342                         regulator-max-microvolt = <2960000>;
 343                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 344                         regulator-allow-set-load;
 345                         regulator-allowed-modes =
 346                             <RPMH_REGULATOR_MODE_LPM
 347                              RPMH_REGULATOR_MODE_HPM>;
 348                 };
 349
 350                 vreg_l10c_3p3: ldo10 {
 351                         regulator-name = "vreg_l10c_3p3";
 352                         regulator-min-microvolt = <3296000>;
 353                         regulator-max-microvolt = <3296000>;
 354                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 355                 };
 356
 357                 vreg_l11c_3p0: ldo11 {
 358                         regulator-name = "vreg_l11c_3p0";
 359                         regulator-min-microvolt = <3000000>;
 360                         regulator-max-microvolt = <3000000>;
 361                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 362                 };
 363         };
 364
 365         pm8009-rpmh-regulators {
 366                 compatible = "qcom,pm8009-rpmh-regulators";
 367                 qcom,pmic-id = "f";
 368
 369                 vdd-s1-supply = <&vph_pwr>;
 370                 vdd-s2-supply = <&vreg_bob>;
 371                 vdd-l2-supply = <&vreg_s8c_1p2>;
 372                 vdd-l5-l6-supply = <&vreg_bob>;
 373                 vdd-l7-supply = <&vreg_s4a_1p8>;
 374
 375                 vreg_s1f_1p2: smps1 {
 376                         regulator-name = "vreg_s1f_1p2";
 377                         regulator-min-microvolt = <1200000>;
 378                         regulator-max-microvolt = <1200000>;
 379                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 380                 };
 381
 382                 vreg_s2f_0p5: smps2 {
 383                         regulator-name = "vreg_s2f_0p5";
 384                         regulator-min-microvolt = <512000>;
 385                         regulator-max-microvolt = <1100000>;
 386                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 387                 };
 388
 389                 /* L1 is unused. */
 390
 391                 vreg_l2f_1p3: ldo2 {
 392                         regulator-name = "vreg_l2f_1p3";
 393                         regulator-min-microvolt = <1304000>;
 394                         regulator-max-microvolt = <1304000>;
 395                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 396                 };
 397
 398                 /* L3 & L4 are unused. */
 399
 400                 vreg_l5f_2p8: ldo5 {
 401                         regulator-name = "vreg_l5f_2p85";
 402                         regulator-min-microvolt = <2800000>;
 403                         regulator-max-microvolt = <2800000>;
 404                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 405                 };
 406
 407                 vreg_l6f_2p8: ldo6 {
 408                         regulator-name = "vreg_l6f_2p8";
 409                         regulator-min-microvolt = <2800000>;
 410                         regulator-max-microvolt = <2800000>;
 411                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 412                 };
 413
 414                 vreg_l7f_1p8: ldo7 {
 415                         regulator-name = "vreg_l7f_1p8";
 416                         regulator-min-microvolt = <1800000>;
 417                         regulator-max-microvolt = <1800000>;
 418                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 419                 };
 420         };
 421 };
 422
 423 &cdsp {
 424         status = "okay";
 425 };
 426
 427 &gpi_dma0 {
 428         status = "okay";
 429 };
 430
 431 &gpi_dma1 {
 432         status = "okay";
 433 };
 434
 435 &gpi_dma2 {
 436         status = "okay";
 437 };
 438
 439 &i2c1 {
 440         status = "okay";
 441         clock-frequency = <400000>;
 442
 443         /* NXP PN553 NFC @ 28 */
 444 };
 445
 446 &i2c2 {
 447         status = "okay";
 448         clock-frequency = <1000000>;
 449
 450         cs35l41_l: cs35l41@40 {
 451                 compatible = "cirrus,cs35l41";
 452                 reg = <0x40>;
 453                 interrupt-parent = <&tlmm>;
 454                 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 455                 reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
 456                 cirrus,boost-peak-milliamp = <4000>;
 457                 cirrus,boost-ind-nanohenry = <1000>;
 458                 cirrus,boost-cap-microfarad = <15>;
 459                 cirrus,asp-sdout-hiz = <3>;
 460                 cirrus,gpio2-src-select = <2>;
 461                 cirrus,gpio2-output-enable;
 462                 #sound-dai-cells = <1>;
 463         };
 464
 465         cs35l41_r: cs35l41@41 {
 466                 compatible = "cirrus,cs35l41";
 467                 reg = <0x41>;
 468                 interrupt-parent = <&tlmm>;
 469                 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 470                 reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
 471                 cirrus,boost-peak-milliamp = <4000>;
 472                 cirrus,boost-ind-nanohenry = <1000>;
 473                 cirrus,boost-cap-microfarad = <15>;
 474                 cirrus,asp-sdout-hiz = <3>;
 475                 cirrus,gpio2-src-select = <2>;
 476                 cirrus,gpio2-output-enable;
 477                 #sound-dai-cells = <1>;
 478         };
 479 };
 480
 481 &i2c5 {
 482         status = "okay";
 483         clock-frequency = <400000>;
 484
 485         /* Dialog SLG51000 CMIC @ 75 */
 486 };
 487
 488 &i2c9 {
 489         status = "okay";
 490         clock-frequency = <400000>;
 491
 492         /* AMS TCS3490 RGB+IR color sensor @ 72 */
 493 };
 494
 495 &i2c13 {
 496         status = "okay";
 497         clock-frequency = <400000>;
 498
 499         touchscreen@48 {
 500                 compatible = "samsung,s6sy761";
 501                 reg = <0x48>;
 502                 interrupt-parent = <&tlmm>;
 503                 interrupts = <39 0x2008>;
 504                 /* It's "vddio" downstream but it works anyway! */
 505                 vdd-supply = <&vreg_l1c_1p8>;
 506                 avdd-supply = <&vreg_l10c_3p3>;
 507
 508                 pinctrl-names = "default";
 509                 pinctrl-0 = <&ts_int_default>;
 510         };
 511 };
 512
 513 &i2c15 {
 514         status = "okay";
 515         clock-frequency = <400000>;
 516
 517         /* Qcom SMB1390 @ 10 */
 518         /* Silicon Labs SI4704 FM Radio Receiver @ 11 */
 519         /* Qcom SMB1390_slave @ 18 */
 520         /* HALO HL6111R Qi charger @ 25 */
 521         /* Richwave RTC6226 FM Radio Receiver @ 64 */
 522 };
 523
 524 &pcie0 {
 525         status = "okay";
 526 };
 527
 528 &pcie0_phy {
 529         status = "okay";
 530
 531         vdda-phy-supply = <&vreg_l5a_0p88>;
 532         vdda-pll-supply = <&vreg_l9a_1p2>;
 533 };
 534
 535 &pcie2 {
 536         status = "okay";
 537
 538         pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
 539 };
 540
 541 &pcie2_phy {
 542         status = "okay";
 543
 544         vdda-phy-supply = <&vreg_l5a_0p88>;
 545         vdda-pll-supply = <&vreg_l9a_1p2>;
 546 };
 547
 548 &pon_pwrkey {
 549         status = "okay";
 550 };
 551
 552 &pon_resin {
 553         status = "okay";
 554
 555         linux,code = <KEY_VOLUMEUP>;
 556 };
 557
 558 &qupv3_id_0 {
 559         status = "okay";
 560 };
 561
 562 &qupv3_id_1 {
 563         status = "okay";
 564 };
 565
 566 &qupv3_id_2 {
 567         status = "okay";
 568 };
 569
 570 &sdhc_2 {
 571         status = "okay";
 572
 573         cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
 574         pinctrl-names = "default", "sleep";
 575         pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
 576         pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
 577         vmmc-supply = <&vreg_l9c_2p9>;
 578         vqmmc-supply = <&vreg_l6c_2p9>;
 579         bus-width = <4>;
 580         no-sdio;
 581         no-emmc;
 582 };
 583
 584 &slpi {
 585         status = "okay";
 586 };
 587
 588 &tlmm {
 589         gpio-reserved-ranges = <40 4>, <52 4>;
 590
 591         sdc2_default_state: sdc2-default {
 592                 clk {
 593                         pins = "sdc2_clk";
 594                         drive-strength = <16>;
 595                         bias-disable;
 596                 };
 597
 598                 cmd {
 599                         pins = "sdc2_cmd";
 600                         drive-strength = <16>;
 601                         bias-pull-up;
 602                 };
 603
 604                 data {
 605                         pins = "sdc2_data";
 606                         drive-strength = <16>;
 607                         bias-pull-up;
 608                 };
 609         };
 610
 611         mdm2ap_default: mdm2ap-default {
 612                 pins = "gpio1", "gpio3";
 613                 function = "gpio";
 614                 drive-strength = <8>;
 615                 bias-disable;
 616         };
 617
 618         ts_int_default: ts-int-default {
 619                 pins = "gpio39";
 620                 function = "gpio";
 621                 drive-strength = <2>;
 622                 bias-disabled;
 623                 input-enable;
 624         };
 625
 626         ap2mdm_default: ap2mdm-default {
 627                 pins = "gpio56", "gpio57";
 628                 function = "gpio";
 629                 drive-strength = <16>;
 630                 bias-disable;
 631         };
 632
 633         sdc2_card_det_n: sd-card-det-n {
 634                 pins = "gpio77";
 635                 function = "gpio";
 636                 bias-pull-up;
 637                 drive-strength = <2>;
 638         };
 639 };
 640
 641 &uart12 {
 642         status = "okay";
 643 };
 644
 645 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
 646 &ufs_mem_hc { status = "disabled"; };
 647 &ufs_mem_phy { status = "disabled"; };
 648
 649 &usb_1 {
 650         status = "okay";
 651 };
 652
 653 &usb_1_dwc3 {
 654         dr_mode = "peripheral";
 655 };
 656
 657 &usb_1_hsphy {
 658         status = "okay";
 659
 660         vdda-pll-supply = <&vreg_l5a_0p88>;
 661         vdda18-supply = <&vreg_l12a_1p8>;
 662         vdda33-supply = <&vreg_l2a_3p1>;
 663 };
 664
 665 &usb_1_qmpphy {
 666         status = "okay";
 667
 668         vdda-phy-supply = <&vreg_l9a_1p2>;
 669         vdda-pll-supply = <&vreg_l18a_0p9>;
 670 };