arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Lenovo Yoga C630
   4  *
   5  * Copyright (c) 2019, Linaro Ltd.
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/input/gpio-keys.h>
  11 #include <dt-bindings/input/input.h>
  12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  13 #include <dt-bindings/sound/qcom,q6afe.h>
  14 #include <dt-bindings/sound/qcom,q6asm.h>
  15 #include "sdm850.dtsi"
  16 #include "pm8998.dtsi"
  17
  18 /*
  19  * Update following upstream (sdm845.dtsi) reserved
  20  * memory mappings for firmware loading to succeed
  21  * and enable the IPA device.
  22  */
  23 /delete-node/ &ipa_fw_mem;
  24 /delete-node/ &ipa_gsi_mem;
  25 /delete-node/ &gpu_mem;
  26 /delete-node/ &adsp_mem;
  27 /delete-node/ &wlan_msa_mem;
  28
  29 / {
  30         model = "Lenovo Yoga C630";
  31         compatible = "lenovo,yoga-c630", "qcom,sdm845";
  32         chassis-type = "convertible";
  33
  34         aliases {
  35                 hsuart0 = &uart6;
  36         };
  37
  38         gpio-keys {
  39                 compatible = "gpio-keys";
  40
  41                 pinctrl-names = "default";
  42                 pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
  43
  44                 lid {
  45                         gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
  46                         linux,input-type = <EV_SW>;
  47                         linux,code = <SW_LID>;
  48                         wakeup-source;
  49                         wakeup-event-action = <EV_ACT_DEASSERTED>;
  50                 };
  51
  52                 mode {
  53                         gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
  54                         linux,input-type = <EV_SW>;
  55                         linux,code = <SW_TABLET_MODE>;
  56                 };
  57         };
  58
  59         panel {
  60                 compatible = "boe,nv133fhm-n61";
  61                 no-hpd;
  62
  63                 ports {
  64                         port {
  65                                 panel_in_edp: endpoint {
  66                                         remote-endpoint = <&sn65dsi86_out>;
  67                                 };
  68                         };
  69                 };
  70         };
  71
  72         /* Reserved memory changes for IPA */
  73         reserved-memory {
  74                 wlan_msa_mem: memory@8c400000 {
  75                         reg = <0 0x8c400000 0 0x100000>;
  76                         no-map;
  77                 };
  78
  79                 gpu_mem: memory@8c515000 {
  80                         reg = <0 0x8c515000 0 0x2000>;
  81                         no-map;
  82                 };
  83
  84                 ipa_fw_mem: memory@8c517000 {
  85                         reg = <0 0x8c517000 0 0x5a000>;
  86                         no-map;
  87                 };
  88
  89                 adsp_mem: memory@8c600000 {
  90                         reg = <0 0x8c600000 0 0x1a00000>;
  91                         no-map;
  92                 };
  93         };
  94
  95         sn65dsi86_refclk: sn65dsi86-refclk {
  96                 compatible = "fixed-clock";
  97                 #clock-cells = <0>;
  98
  99                 clock-frequency = <19200000>;
 100         };
 101 };
 102
 103 &adsp_pas {
 104         firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
 105         status = "okay";
 106 };
 107
 108 &apps_rsc {
 109         pm8998-rpmh-regulators {
 110                 compatible = "qcom,pm8998-rpmh-regulators";
 111                 qcom,pmic-id = "a";
 112
 113                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
 114                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
 115
 116                 vreg_s2a_1p125: smps2 {
 117                 };
 118
 119                 vreg_s3a_1p35: smps3 {
 120                         regulator-min-microvolt = <1352000>;
 121                         regulator-max-microvolt = <1352000>;
 122                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 123                 };
 124
 125                 vreg_s4a_1p8: smps4 {
 126                         regulator-min-microvolt = <1800000>;
 127                         regulator-max-microvolt = <1800000>;
 128                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 129                 };
 130
 131                 vreg_s5a_2p04: smps5 {
 132                         regulator-min-microvolt = <2040000>;
 133                         regulator-max-microvolt = <2040000>;
 134                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 135                 };
 136
 137                 vreg_s7a_1p025: smps7 {
 138                 };
 139
 140                 vdd_qusb_hs0:
 141                 vdda_hp_pcie_core:
 142                 vdda_mipi_csi0_0p9:
 143                 vdda_mipi_csi1_0p9:
 144                 vdda_mipi_csi2_0p9:
 145                 vdda_mipi_dsi0_pll:
 146                 vdda_mipi_dsi1_pll:
 147                 vdda_qlink_lv:
 148                 vdda_qlink_lv_ck:
 149                 vdda_qrefs_0p875:
 150                 vdda_pcie_core:
 151                 vdda_pll_cc_ebi01:
 152                 vdda_pll_cc_ebi23:
 153                 vdda_sp_sensor:
 154                 vdda_ufs1_core:
 155                 vdda_ufs2_core:
 156                 vdda_usb1_ss_core:
 157                 vdda_usb2_ss_core:
 158                 vreg_l1a_0p875: ldo1 {
 159                         regulator-min-microvolt = <880000>;
 160                         regulator-max-microvolt = <880000>;
 161                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 162                 };
 163
 164                 vddpx_10:
 165                 vreg_l2a_1p2: ldo2 {
 166                         regulator-min-microvolt = <1200000>;
 167                         regulator-max-microvolt = <1200000>;
 168                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 169                         regulator-always-on;
 170                 };
 171
 172                 vreg_l3a_1p0: ldo3 {
 173                 };
 174
 175                 vdd_wcss_cx:
 176                 vdd_wcss_mx:
 177                 vdda_wcss_pll:
 178                 vreg_l5a_0p8: ldo5 {
 179                         regulator-min-microvolt = <800000>;
 180                         regulator-max-microvolt = <800000>;
 181                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 182                 };
 183
 184                 vddpx_13:
 185                 vreg_l6a_1p8: ldo6 {
 186                         regulator-min-microvolt = <1800000>;
 187                         regulator-max-microvolt = <1800000>;
 188                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 189                 };
 190
 191                 vreg_l7a_1p8: ldo7 {
 192                         regulator-min-microvolt = <1800000>;
 193                         regulator-max-microvolt = <1800000>;
 194                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 195                 };
 196
 197                 vreg_l8a_1p2: ldo8 {
 198                 };
 199
 200                 vreg_l9a_1p8: ldo9 {
 201                 };
 202
 203                 vreg_l10a_1p8: ldo10 {
 204                 };
 205
 206                 vreg_l11a_1p0: ldo11 {
 207                 };
 208
 209                 vdd_qfprom:
 210                 vdd_qfprom_sp:
 211                 vdda_apc1_cs_1p8:
 212                 vdda_gfx_cs_1p8:
 213                 vdda_qrefs_1p8:
 214                 vdda_qusb_hs0_1p8:
 215                 vddpx_11:
 216                 vreg_l12a_1p8: ldo12 {
 217                         regulator-min-microvolt = <1800000>;
 218                         regulator-max-microvolt = <1800000>;
 219                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 220                 };
 221
 222                 vddpx_2:
 223                 vreg_l13a_2p95: ldo13 {
 224                 };
 225
 226                 vreg_l14a_1p88: ldo14 {
 227                         regulator-min-microvolt = <1880000>;
 228                         regulator-max-microvolt = <1880000>;
 229                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 230                         regulator-always-on;
 231                 };
 232
 233                 vreg_l15a_1p8: ldo15 {
 234                 };
 235
 236                 vreg_l16a_2p7: ldo16 {
 237                 };
 238
 239                 vreg_l17a_1p3: ldo17 {
 240                         regulator-min-microvolt = <1304000>;
 241                         regulator-max-microvolt = <1304000>;
 242                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 243                 };
 244
 245                 vreg_l18a_2p7: ldo18 {
 246                 };
 247
 248                 vreg_l19a_3p0: ldo19 {
 249                         regulator-min-microvolt = <3100000>;
 250                         regulator-max-microvolt = <3108000>;
 251                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 252                 };
 253
 254                 vreg_l20a_2p95: ldo20 {
 255                         regulator-min-microvolt = <2960000>;
 256                         regulator-max-microvolt = <2960000>;
 257                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 258                 };
 259
 260                 vreg_l21a_2p95: ldo21 {
 261                 };
 262
 263                 vreg_l22a_2p85: ldo22 {
 264                 };
 265
 266                 vreg_l23a_3p3: ldo23 {
 267                         regulator-min-microvolt = <3300000>;
 268                         regulator-max-microvolt = <3312000>;
 269                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 270                 };
 271
 272                 vdda_qusb_hs0_3p1:
 273                 vreg_l24a_3p075: ldo24 {
 274                         regulator-min-microvolt = <3075000>;
 275                         regulator-max-microvolt = <3083000>;
 276                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 277                 };
 278
 279                 vreg_l25a_3p3: ldo25 {
 280                         regulator-min-microvolt = <3104000>;
 281                         regulator-max-microvolt = <3112000>;
 282                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 283                 };
 284
 285                 vdda_hp_pcie_1p2:
 286                 vdda_hv_ebi0:
 287                 vdda_hv_ebi1:
 288                 vdda_hv_ebi2:
 289                 vdda_hv_ebi3:
 290                 vdda_mipi_csi_1p25:
 291                 vdda_mipi_dsi0_1p2:
 292                 vdda_mipi_dsi1_1p2:
 293                 vdda_pcie_1p2:
 294                 vdda_ufs1_1p2:
 295                 vdda_ufs2_1p2:
 296                 vdda_usb1_ss_1p2:
 297                 vdda_usb2_ss_1p2:
 298                 vreg_l26a_1p2: ldo26 {
 299                         regulator-min-microvolt = <1200000>;
 300                         regulator-max-microvolt = <1208000>;
 301                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 302                 };
 303
 304                 vreg_l28a_3p0: ldo28 {
 305                 };
 306
 307                 vreg_lvs1a_1p8: lvs1 {
 308                 };
 309
 310                 vreg_lvs2a_1p8: lvs2 {
 311                 };
 312         };
 313 };
 314
 315 &cdsp_pas {
 316         firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn";
 317         status = "okay";
 318 };
 319
 320 &dsi0 {
 321         status = "okay";
 322         vdda-supply = <&vreg_l26a_1p2>;
 323
 324         ports {
 325                 port@1 {
 326                         endpoint {
 327                                 remote-endpoint = <&sn65dsi86_in_a>;
 328                                 data-lanes = <0 1 2 3>;
 329                         };
 330                 };
 331         };
 332 };
 333
 334 &dsi0_phy {
 335         status = "okay";
 336         vdds-supply = <&vreg_l1a_0p875>;
 337 };
 338
 339 &gcc {
 340         protected-clocks = <GCC_QSPI_CORE_CLK>,
 341                            <GCC_QSPI_CORE_CLK_SRC>,
 342                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 343                            <GCC_LPASS_Q6_AXI_CLK>,
 344                            <GCC_LPASS_SWAY_CLK>;
 345 };
 346
 347 &gmu {
 348         status = "okay";
 349 };
 350
 351 &gpu {
 352         status = "okay";
 353         zap-shader {
 354                 memory-region = <&gpu_mem>;
 355                 firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
 356         };
 357 };
 358
 359 &i2c1 {
 360         status = "okay";
 361         clock-frequency = <400000>;
 362 };
 363
 364 &i2c3 {
 365         status = "okay";
 366         clock-frequency = <400000>;
 367         /* Overwrite pinctrl-0 from sdm845.dtsi */
 368         pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
 369
 370         tsel: hid@15 {
 371                 compatible = "hid-over-i2c";
 372                 reg = <0x15>;
 373                 hid-descr-addr = <0x1>;
 374
 375                 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
 376         };
 377
 378         tsc2: hid@2c {
 379                 compatible = "hid-over-i2c";
 380                 reg = <0x2c>;
 381                 hid-descr-addr = <0x20>;
 382
 383                 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
 384         };
 385 };
 386
 387 &i2c5 {
 388         status = "okay";
 389         clock-frequency = <400000>;
 390
 391         tsc1: hid@10 {
 392                 compatible = "hid-over-i2c";
 393                 reg = <0x10>;
 394                 hid-descr-addr = <0x1>;
 395
 396                 interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
 397
 398                 pinctrl-names = "default";
 399                 pinctrl-0 = <&i2c5_hid_active>;
 400         };
 401 };
 402
 403 &i2c10 {
 404         status = "okay";
 405         clock-frequency = <400000>;
 406
 407         sn65dsi86: bridge@2c {
 408                 compatible = "ti,sn65dsi86";
 409                 reg = <0x2c>;
 410                 pinctrl-names = "default";
 411                 pinctrl-0 = <&sn65dsi86_pin_active>;
 412
 413                 enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 414
 415                 vpll-supply = <&vreg_l14a_1p88>;
 416                 vccio-supply = <&vreg_l14a_1p88>;
 417
 418                 clocks = <&sn65dsi86_refclk>;
 419                 clock-names = "refclk";
 420
 421                 no-hpd;
 422
 423                 ports {
 424                         #address-cells = <1>;
 425                         #size-cells = <0>;
 426
 427                         port@0 {
 428                                 reg = <0>;
 429                                 sn65dsi86_in_a: endpoint {
 430                                         remote-endpoint = <&dsi0_out>;
 431                                 };
 432                         };
 433
 434                         port@1 {
 435                                 reg = <1>;
 436                                 sn65dsi86_out: endpoint {
 437                                         remote-endpoint = <&panel_in_edp>;
 438                                 };
 439                         };
 440                 };
 441         };
 442 };
 443
 444 &i2c11 {
 445         status = "okay";
 446         clock-frequency = <400000>;
 447
 448         ecsh: hid@5c {
 449                 compatible = "hid-over-i2c";
 450                 reg = <0x5c>;
 451                 hid-descr-addr = <0x1>;
 452
 453                 interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
 454
 455                 pinctrl-names = "default";
 456                 pinctrl-0 = <&i2c11_hid_active>;
 457         };
 458 };
 459
 460 &ipa {
 461         status = "okay";
 462         memory-region = <&ipa_fw_mem>;
 463 };
 464
 465 &mdss {
 466         status = "okay";
 467 };
 468
 469 &mss_pil {
 470         status = "okay";
 471         firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
 472 };
 473
 474 &qup_i2c10_default {
 475         pinconf {
 476                 pins = "gpio55", "gpio56";
 477                 drive-strength = <2>;
 478                 bias-disable;
 479         };
 480 };
 481
 482 &qup_i2c12_default {
 483         drive-strength = <2>;
 484         bias-disable;
 485 };
 486
 487 &qup_uart6_default {
 488         pinmux {
 489                  pins = "gpio45", "gpio46", "gpio47", "gpio48";
 490                  function = "qup6";
 491         };
 492
 493         cts {
 494                 pins = "gpio45";
 495                 bias-pull-down;
 496         };
 497
 498         rts-tx {
 499                 pins = "gpio46", "gpio47";
 500                 drive-strength = <2>;
 501                 bias-disable;
 502         };
 503
 504         rx {
 505                 pins = "gpio48";
 506                 bias-pull-up;
 507         };
 508 };
 509
 510 &qupv3_id_0 {
 511         status = "okay";
 512 };
 513
 514 &qupv3_id_1 {
 515         status = "okay";
 516 };
 517
 518 &q6asmdai {
 519         dai@0 {
 520                 reg = <0>;
 521         };
 522
 523         dai@1 {
 524                 reg = <1>;
 525         };
 526 };
 527
 528 &sound {
 529         compatible = "qcom,db845c-sndcard";
 530         model = "Lenovo-YOGA-C630-13Q50";
 531
 532         audio-routing =
 533                 "RX_BIAS", "MCLK",
 534                 "AMIC2", "MIC BIAS2",
 535                 "SpkrLeft IN", "SPK1 OUT",
 536                 "SpkrRight IN", "SPK2 OUT",
 537                 "MM_DL1",  "MultiMedia1 Playback",
 538                 "MultiMedia2 Capture", "MM_UL2";
 539
 540         mm1-dai-link {
 541                 link-name = "MultiMedia1";
 542                 cpu {
 543                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
 544                 };
 545         };
 546
 547         mm2-dai-link {
 548                 link-name = "MultiMedia2";
 549                 cpu {
 550                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
 551                 };
 552         };
 553
 554         slim-dai-link {
 555                 link-name = "SLIM Playback";
 556                 cpu {
 557                         sound-dai = <&q6afedai SLIMBUS_0_RX>;
 558                 };
 559
 560                 platform {
 561                         sound-dai = <&q6routing>;
 562                 };
 563
 564                 codec {
 565                         sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
 566                 };
 567         };
 568
 569         slimcap-dai-link {
 570                 link-name = "SLIM Capture";
 571                 cpu {
 572                         sound-dai = <&q6afedai SLIMBUS_0_TX>;
 573                 };
 574
 575                 platform {
 576                         sound-dai = <&q6routing>;
 577                 };
 578
 579                 codec {
 580                         sound-dai = <&wcd9340 1>;
 581                 };
 582         };
 583 };
 584
 585 &tlmm {
 586         gpio-reserved-ranges = <0 4>, <81 4>;
 587
 588         sn65dsi86_pin_active: sn65dsi86-enable {
 589                 pins = "gpio96";
 590                 drive-strength = <2>;
 591                 bias-disable;
 592         };
 593
 594         i2c3_hid_active: i2c2-hid-active {
 595                 pins = "gpio37";
 596                 function = "gpio";
 597
 598                 input-enable;
 599                 bias-pull-up;
 600                 drive-strength = <2>;
 601         };
 602
 603         i2c5_hid_active: i2c5-hid-active {
 604                 pins = "gpio125";
 605                 function = "gpio";
 606
 607                 input-enable;
 608                 bias-pull-up;
 609                 drive-strength = <2>;
 610         };
 611
 612         i2c11_hid_active: i2c11-hid-active {
 613                 pins = "gpio92";
 614                 function = "gpio";
 615
 616                 input-enable;
 617                 bias-pull-up;
 618                 drive-strength = <2>;
 619         };
 620
 621         wcd_intr_default: wcd_intr_default {
 622                 pins = "gpio54";
 623                 function = "gpio";
 624
 625                 input-enable;
 626                 bias-pull-down;
 627                 drive-strength = <2>;
 628         };
 629
 630         lid_pin_active: lid-pin {
 631                 pins = "gpio124";
 632                 function = "gpio";
 633
 634                 input-enable;
 635                 bias-disable;
 636         };
 637
 638         mode_pin_active: mode-pin {
 639                 pins = "gpio95";
 640                 function = "gpio";
 641
 642                 input-enable;
 643                 bias-disable;
 644         };
 645 };
 646
 647 &uart6 {
 648         status = "okay";
 649
 650         bluetooth {
 651                 compatible = "qcom,wcn3990-bt";
 652
 653                 vddio-supply = <&vreg_s4a_1p8>;
 654                 vddxo-supply = <&vreg_l7a_1p8>;
 655                 vddrf-supply = <&vreg_l17a_1p3>;
 656                 vddch0-supply = <&vreg_l25a_3p3>;
 657                 vddch1-supply = <&vreg_l23a_3p3>;
 658                 max-speed = <3200000>;
 659         };
 660 };
 661
 662 &ufs_mem_hc {
 663         status = "okay";
 664
 665         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 666
 667         vcc-supply = <&vreg_l20a_2p95>;
 668         vcc-max-microamp = <600000>;
 669 };
 670
 671 &ufs_mem_phy {
 672         status = "okay";
 673
 674         vdda-phy-supply = <&vdda_ufs1_core>;
 675         vdda-pll-supply = <&vdda_ufs1_1p2>;
 676 };
 677
 678 &usb_1 {
 679         status = "okay";
 680 };
 681
 682 &usb_1_dwc3 {
 683         dr_mode = "host";
 684 };
 685
 686 &usb_1_hsphy {
 687         status = "okay";
 688
 689         vdd-supply = <&vdda_usb1_ss_core>;
 690         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 691         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 692
 693         qcom,imp-res-offset-value = <8>;
 694         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 695         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 696         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 697 };
 698
 699 &usb_1_qmpphy {
 700         status = "okay";
 701
 702         vdda-phy-supply = <&vdda_usb1_ss_1p2>;
 703         vdda-pll-supply = <&vdda_usb1_ss_core>;
 704 };
 705
 706 &usb_2 {
 707         status = "okay";
 708 };
 709
 710 &usb_2_dwc3 {
 711         dr_mode = "host";
 712 };
 713
 714 &usb_2_hsphy {
 715         status = "okay";
 716
 717         vdd-supply = <&vdda_usb2_ss_core>;
 718         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 719         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 720
 721         qcom,imp-res-offset-value = <8>;
 722         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
 723 };
 724
 725 &usb_2_qmpphy {
 726         status = "okay";
 727
 728         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
 729         vdda-pll-supply = <&vdda_usb2_ss_core>;
 730 };
 731
 732 &venus {
 733         status = "okay";
 734 };
 735
 736 &wcd9340{
 737         pinctrl-0 = <&wcd_intr_default>;
 738         pinctrl-names = "default";
 739         clock-names = "extclk";
 740         clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 741         reset-gpios = <&tlmm 64 0>;
 742         vdd-buck-supply = <&vreg_s4a_1p8>;
 743         vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 744         vdd-tx-supply = <&vreg_s4a_1p8>;
 745         vdd-rx-supply = <&vreg_s4a_1p8>;
 746         vdd-io-supply = <&vreg_s4a_1p8>;
 747
 748         swm: swm@c85 {
 749                 left_spkr: wsa8810-left{
 750                         compatible = "sdw10217211000";
 751                         reg = <0 3>;
 752                         powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 753                         #thermal-sensor-cells = <0>;
 754                         sound-name-prefix = "SpkrLeft";
 755                         #sound-dai-cells = <0>;
 756                 };
 757
 758                 right_spkr: wsa8810-right{
 759                         compatible = "sdw10217211000";
 760                         powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 761                         reg = <0 4>;
 762                         #thermal-sensor-cells = <0>;
 763                         sound-name-prefix = "SpkrRight";
 764                         #sound-dai-cells = <0>;
 765                 };
 766         };
 767 };
 768
 769 &wifi {
 770         status = "okay";
 771
 772         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 773         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 774         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 775         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 776         vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 777
 778         qcom,snoc-host-cap-8bit-quirk;
 779 };