arch/arm64/boot/dts/qcom/sc8280xp-crd.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, The Linux Foundation. All rights reserved.
   4  * Copyright (c) 2022, Linaro Limited
   5  */
   6
   7 /dts-v1/;
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  11
  12 #include "sc8280xp.dtsi"
  13 #include "sc8280xp-pmics.dtsi"
  14
  15 / {
  16         model = "Qualcomm SC8280XP CRD";
  17         compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
  18
  19         aliases {
  20                 i2c4 = &i2c4;
  21                 i2c21 = &i2c21;
  22                 serial0 = &uart17;
  23         };
  24
  25         backlight: backlight {
  26                 compatible = "pwm-backlight";
  27                 pwms = <&pmc8280c_lpg 3 1000000>;
  28                 enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
  29                 power-supply = <&vreg_edp_bl>;
  30
  31                 pinctrl-names = "default";
  32                 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
  33         };
  34
  35         chosen {
  36                 stdout-path = "serial0:115200n8";
  37         };
  38
  39         pmic-glink {
  40                 compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
  41
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44
  45                 connector@0 {
  46                         compatible = "usb-c-connector";
  47                         reg = <0>;
  48                         power-role = "dual";
  49                         data-role = "dual";
  50
  51                         ports {
  52                                 #address-cells = <1>;
  53                                 #size-cells = <0>;
  54
  55                                 port@0 {
  56                                         reg = <0>;
  57
  58                                         pmic_glink_con0_hs: endpoint {
  59                                                 remote-endpoint = <&usb_0_role_switch>;
  60                                         };
  61                                 };
  62
  63                                 port@1 {
  64                                         reg = <1>;
  65
  66                                         pmic_glink_con0_ss: endpoint {
  67                                                 remote-endpoint = <&usb_0_qmpphy_out>;
  68                                         };
  69                                 };
  70
  71                                 port@2 {
  72                                         reg = <2>;
  73
  74                                         pmic_glink_con0_sbu: endpoint {
  75                                                 remote-endpoint = <&usb0_sbu_mux>;
  76                                         };
  77                                 };
  78                         };
  79                 };
  80
  81                 connector@1 {
  82                         compatible = "usb-c-connector";
  83                         reg = <1>;
  84                         power-role = "dual";
  85                         data-role = "dual";
  86
  87                         ports {
  88                                 #address-cells = <1>;
  89                                 #size-cells = <0>;
  90                                 port@0 {
  91                                         reg = <0>;
  92
  93                                         pmic_glink_con1_hs: endpoint {
  94                                                 remote-endpoint = <&usb_1_role_switch>;
  95                                         };
  96                                 };
  97
  98                                 port@1 {
  99                                         reg = <1>;
 100
 101                                         pmic_glink_con1_ss: endpoint {
 102                                                 remote-endpoint = <&usb_1_qmpphy_out>;
 103                                         };
 104                                 };
 105
 106                                 port@2 {
 107                                         reg = <2>;
 108
 109                                         pmic_glink_con1_sbu: endpoint {
 110                                                 remote-endpoint = <&usb1_sbu_mux>;
 111                                         };
 112                                 };
 113                         };
 114                 };
 115         };
 116
 117         vreg_edp_3p3: regulator-edp-3p3 {
 118                 compatible = "regulator-fixed";
 119
 120                 regulator-name = "VREG_EDP_3P3";
 121                 regulator-min-microvolt = <3300000>;
 122                 regulator-max-microvolt = <3300000>;
 123
 124                 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
 125                 enable-active-high;
 126
 127                 pinctrl-names = "default";
 128                 pinctrl-0 = <&edp_reg_en>;
 129
 130                 regulator-boot-on;
 131         };
 132
 133         vreg_edp_bl: regulator-edp-bl {
 134                 compatible = "regulator-fixed";
 135
 136                 regulator-name = "VREG_EDP_BL";
 137                 regulator-min-microvolt = <3600000>;
 138                 regulator-max-microvolt = <3600000>;
 139
 140                 gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
 141                 enable-active-high;
 142
 143                 pinctrl-names = "default";
 144                 pinctrl-0 = <&edp_bl_reg_en>;
 145
 146                 regulator-boot-on;
 147         };
 148
 149         vreg_nvme: regulator-nvme {
 150                 compatible = "regulator-fixed";
 151
 152                 regulator-name = "VREG_NVME_3P3";
 153                 regulator-min-microvolt = <3300000>;
 154                 regulator-max-microvolt = <3300000>;
 155
 156                 gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
 157                 enable-active-high;
 158
 159                 pinctrl-names = "default";
 160                 pinctrl-0 = <&nvme_reg_en>;
 161         };
 162
 163         vreg_misc_3p3: regulator-misc-3p3 {
 164                 compatible = "regulator-fixed";
 165
 166                 regulator-name = "VREG_MISC_3P3";
 167                 regulator-min-microvolt = <3300000>;
 168                 regulator-max-microvolt = <3300000>;
 169
 170                 gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>;
 171                 enable-active-high;
 172
 173                 pinctrl-names = "default";
 174                 pinctrl-0 = <&misc_3p3_reg_en>;
 175
 176                 regulator-boot-on;
 177                 regulator-always-on;
 178         };
 179
 180         vreg_wlan: regulator-wlan {
 181                 compatible = "regulator-fixed";
 182
 183                 regulator-name = "VPH_PWR_WLAN";
 184                 regulator-min-microvolt = <3900000>;
 185                 regulator-max-microvolt = <3900000>;
 186
 187                 gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
 188                 enable-active-high;
 189
 190                 pinctrl-names = "default";
 191                 pinctrl-0 = <&hastings_reg_en>;
 192
 193                 regulator-boot-on;
 194         };
 195
 196         vreg_wwan: regulator-wwan {
 197                 compatible = "regulator-fixed";
 198
 199                 regulator-name = "SDX_VPH_PWR";
 200                 regulator-min-microvolt = <3300000>;
 201                 regulator-max-microvolt = <3300000>;
 202
 203                 gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
 204                 enable-active-high;
 205
 206                 pinctrl-names = "default";
 207                 pinctrl-0 = <&wwan_sw_en>;
 208
 209                 regulator-boot-on;
 210         };
 211
 212         reserved-memory {
 213                 gpu_mem: gpu-mem@8bf00000 {
 214                         reg = <0 0x8bf00000 0 0x2000>;
 215                         no-map;
 216                 };
 217
 218                 linux,cma {
 219                         compatible = "shared-dma-pool";
 220                         size = <0x0 0x8000000>;
 221                         reusable;
 222                         linux,cma-default;
 223                 };
 224         };
 225
 226         usb0-sbu-mux {
 227                 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
 228
 229                 enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
 230                 select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
 231
 232                 pinctrl-names = "default";
 233                 pinctrl-0 = <&usb0_sbu_default>;
 234
 235                 mode-switch;
 236                 orientation-switch;
 237
 238                 port {
 239                         usb0_sbu_mux: endpoint {
 240                                 remote-endpoint = <&pmic_glink_con0_sbu>;
 241                         };
 242                 };
 243         };
 244
 245         usb1-sbu-mux {
 246                 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
 247
 248                 enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
 249                 select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
 250
 251                 pinctrl-names = "default";
 252                 pinctrl-0 = <&usb1_sbu_default>;
 253
 254                 mode-switch;
 255                 orientation-switch;
 256
 257                 port {
 258                         usb1_sbu_mux: endpoint {
 259                                 remote-endpoint = <&pmic_glink_con1_sbu>;
 260                         };
 261                 };
 262         };
 263 };
 264
 265 &apps_rsc {
 266         regulators-0 {
 267                 compatible = "qcom,pm8350-rpmh-regulators";
 268                 qcom,pmic-id = "b";
 269
 270                 vdd-l3-l5-supply = <&vreg_s11b>;
 271
 272                 vreg_s11b: smps11 {
 273                         regulator-name = "vreg_s11b";
 274                         regulator-min-microvolt = <1272000>;
 275                         regulator-max-microvolt = <1272000>;
 276                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 277                 };
 278
 279                 vreg_l3b: ldo3 {
 280                         regulator-name = "vreg_l3b";
 281                         regulator-min-microvolt = <1200000>;
 282                         regulator-max-microvolt = <1200000>;
 283                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 284                         regulator-boot-on;
 285                 };
 286
 287                 vreg_l4b: ldo4 {
 288                         regulator-name = "vreg_l4b";
 289                         regulator-min-microvolt = <912000>;
 290                         regulator-max-microvolt = <912000>;
 291                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 292                 };
 293
 294                 vreg_l6b: ldo6 {
 295                         regulator-name = "vreg_l6b";
 296                         regulator-min-microvolt = <880000>;
 297                         regulator-max-microvolt = <880000>;
 298                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 299                         regulator-boot-on;
 300                 };
 301         };
 302
 303         regulators-1 {
 304                 compatible = "qcom,pm8350c-rpmh-regulators";
 305                 qcom,pmic-id = "c";
 306
 307                 vreg_l1c: ldo1 {
 308                         regulator-name = "vreg_l1c";
 309                         regulator-min-microvolt = <1800000>;
 310                         regulator-max-microvolt = <1800000>;
 311                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 312                 };
 313
 314                 vreg_l6c: ldo6 {
 315                         regulator-name = "vreg_l6c";
 316                         regulator-min-microvolt = <1800000>;
 317                         regulator-max-microvolt = <2960000>;
 318                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 319                 };
 320
 321                 vreg_l7c: ldo7 {
 322                         regulator-name = "vreg_l7c";
 323                         regulator-min-microvolt = <2504000>;
 324                         regulator-max-microvolt = <2504000>;
 325                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 326                         regulator-allow-set-load;
 327                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 328                                                    RPMH_REGULATOR_MODE_HPM>;
 329                 };
 330
 331                 vreg_l9c: ldo9 {
 332                         regulator-name = "vreg_l9c";
 333                         regulator-min-microvolt = <2960000>;
 334                         regulator-max-microvolt = <2960000>;
 335                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 336                 };
 337
 338                 vreg_l13c: ldo13 {
 339                         regulator-name = "vreg_l13c";
 340                         regulator-min-microvolt = <3072000>;
 341                         regulator-max-microvolt = <3072000>;
 342                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 343                 };
 344         };
 345
 346         regulators-2 {
 347                 compatible = "qcom,pm8350-rpmh-regulators";
 348                 qcom,pmic-id = "d";
 349
 350                 vdd-l1-l4-supply = <&vreg_s11b>;
 351
 352                 vreg_l3d: ldo3 {
 353                         regulator-name = "vreg_l3d";
 354                         regulator-min-microvolt = <1200000>;
 355                         regulator-max-microvolt = <1200000>;
 356                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 357                         regulator-allow-set-load;
 358                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 359                                                    RPMH_REGULATOR_MODE_HPM>;
 360                 };
 361
 362                 vreg_l4d: ldo4 {
 363                         regulator-name = "vreg_l4d";
 364                         regulator-min-microvolt = <1200000>;
 365                         regulator-max-microvolt = <1200000>;
 366                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 367                 };
 368
 369                 vreg_l6d: ldo6 {
 370                         regulator-name = "vreg_l6d";
 371                         regulator-min-microvolt = <880000>;
 372                         regulator-max-microvolt = <880000>;
 373                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 374                 };
 375
 376                 vreg_l7d: ldo7 {
 377                         regulator-name = "vreg_l7d";
 378                         regulator-min-microvolt = <3072000>;
 379                         regulator-max-microvolt = <3072000>;
 380                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 381                 };
 382
 383                 vreg_l9d: ldo9 {
 384                         regulator-name = "vreg_l9d";
 385                         regulator-min-microvolt = <912000>;
 386                         regulator-max-microvolt = <912000>;
 387                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 388                 };
 389         };
 390 };
 391
 392 &dispcc0 {
 393         status = "okay";
 394 };
 395
 396 &gpu {
 397         status = "okay";
 398
 399         zap-shader {
 400                 memory-region = <&gpu_mem>;
 401                 firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn";
 402         };
 403 };
 404
 405 &mdss0 {
 406         status = "okay";
 407 };
 408
 409 &mdss0_dp0 {
 410         status = "okay";
 411 };
 412
 413 &mdss0_dp0_out {
 414         data-lanes = <0 1>;
 415         remote-endpoint = <&usb_0_qmpphy_dp_in>;
 416 };
 417
 418 &mdss0_dp1 {
 419         status = "okay";
 420 };
 421
 422 &mdss0_dp1_out {
 423         data-lanes = <0 1>;
 424         remote-endpoint = <&usb_1_qmpphy_dp_in>;
 425 };
 426
 427 &mdss0_dp3 {
 428         compatible = "qcom,sc8280xp-edp";
 429         /delete-property/ #sound-dai-cells;
 430
 431         data-lanes = <0 1 2 3>;
 432
 433         status = "okay";
 434
 435         aux-bus {
 436                 panel {
 437                         compatible = "edp-panel";
 438                         power-supply = <&vreg_edp_3p3>;
 439
 440                         backlight = <&backlight>;
 441
 442                         port {
 443                                 edp_panel_in: endpoint {
 444                                         remote-endpoint = <&mdss0_dp3_out>;
 445                                 };
 446                         };
 447                 };
 448         };
 449
 450         ports {
 451                 port@1 {
 452                         reg = <1>;
 453                         mdss0_dp3_out: endpoint {
 454                                 remote-endpoint = <&edp_panel_in>;
 455                         };
 456                 };
 457         };
 458 };
 459
 460 &mdss0_dp3_phy {
 461         vdda-phy-supply = <&vreg_l6b>;
 462         vdda-pll-supply = <&vreg_l3b>;
 463
 464         status = "okay";
 465 };
 466
 467 &i2c4 {
 468         clock-frequency = <400000>;
 469
 470         pinctrl-names = "default";
 471         pinctrl-0 = <&i2c4_default>;
 472
 473         status = "okay";
 474
 475         touchscreen@10 {
 476                 compatible = "hid-over-i2c";
 477                 reg = <0x10>;
 478
 479                 hid-descr-addr = <0x1>;
 480                 interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
 481                 vdd-supply = <&vreg_misc_3p3>;
 482
 483                 pinctrl-names = "default";
 484                 pinctrl-0 = <&ts0_default>;
 485         };
 486 };
 487
 488 &i2c21 {
 489         clock-frequency = <400000>;
 490
 491         pinctrl-names = "default";
 492         pinctrl-0 = <&i2c21_default>;
 493
 494         status = "okay";
 495
 496         touchpad@15 {
 497                 compatible = "hid-over-i2c";
 498                 reg = <0x15>;
 499
 500                 hid-descr-addr = <0x1>;
 501                 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
 502                 vdd-supply = <&vreg_misc_3p3>;
 503
 504                 pinctrl-names = "default";
 505                 pinctrl-0 = <&tpad_default>;
 506
 507                 wakeup-source;
 508         };
 509
 510         keyboard@68 {
 511                 compatible = "hid-over-i2c";
 512                 reg = <0x68>;
 513
 514                 hid-descr-addr = <0x1>;
 515                 interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 516                 vdd-supply = <&vreg_misc_3p3>;
 517
 518                 pinctrl-names = "default";
 519                 pinctrl-0 = <&kybd_default>;
 520
 521                 wakeup-source;
 522         };
 523 };
 524
 525 &pcie2a {
 526         perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
 527         wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
 528
 529         vddpe-3v3-supply = <&vreg_nvme>;
 530
 531         pinctrl-names = "default";
 532         pinctrl-0 = <&pcie2a_default>;
 533
 534         status = "okay";
 535 };
 536
 537 &pcie2a_phy {
 538         vdda-phy-supply = <&vreg_l6d>;
 539         vdda-pll-supply = <&vreg_l4d>;
 540
 541         status = "okay";
 542 };
 543
 544 &pcie3a {
 545         perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
 546         wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
 547
 548         vddpe-3v3-supply = <&vreg_wwan>;
 549
 550         pinctrl-names = "default";
 551         pinctrl-0 = <&pcie3a_default>;
 552
 553         status = "okay";
 554 };
 555
 556 &pcie3a_phy {
 557         vdda-phy-supply = <&vreg_l6d>;
 558         vdda-pll-supply = <&vreg_l4d>;
 559
 560         status = "okay";
 561 };
 562
 563 &pcie4 {
 564         perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 565         wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 566
 567         vddpe-3v3-supply = <&vreg_wlan>;
 568
 569         pinctrl-names = "default";
 570         pinctrl-0 = <&pcie4_default>;
 571
 572         status = "okay";
 573 };
 574
 575 &pcie4_phy {
 576         vdda-phy-supply = <&vreg_l6d>;
 577         vdda-pll-supply = <&vreg_l4d>;
 578
 579         status = "okay";
 580 };
 581
 582 &pmc8280c_lpg {
 583         status = "okay";
 584 };
 585
 586 &pmk8280_pon_pwrkey {
 587         status = "okay";
 588 };
 589
 590 &pmk8280_rtc {
 591         nvmem-cells = <&rtc_offset>;
 592         nvmem-cell-names = "offset";
 593
 594         status = "okay";
 595 };
 596
 597 &pmk8280_sdam_6 {
 598         status = "okay";
 599
 600         rtc_offset: rtc-offset@bc {
 601                 reg = <0xbc 0x4>;
 602         };
 603 };
 604
 605 &qup0 {
 606         status = "okay";
 607 };
 608
 609 &qup1 {
 610         status = "okay";
 611 };
 612
 613 &qup2 {
 614         status = "okay";
 615 };
 616
 617 &remoteproc_adsp {
 618         firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
 619
 620         status = "okay";
 621 };
 622
 623 &remoteproc_nsp0 {
 624         firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
 625
 626         status = "okay";
 627 };
 628
 629 &sdc2 {
 630         pinctrl-0 = <&sdc2_default_state>;
 631         pinctrl-1 = <&sdc2_sleep_state>;
 632         pinctrl-names = "default", "sleep";
 633
 634         vmmc-supply = <&vreg_l9c>;
 635         vqmmc-supply = <&vreg_l6c>;
 636
 637         cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>;
 638
 639         status = "okay";
 640 };
 641
 642 &uart17 {
 643         compatible = "qcom,geni-debug-uart";
 644
 645         status = "okay";
 646 };
 647
 648 &ufs_mem_hc {
 649         reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 650
 651         vcc-supply = <&vreg_l7c>;
 652         vcc-max-microamp = <800000>;
 653         vccq-supply = <&vreg_l3d>;
 654         vccq-max-microamp = <900000>;
 655
 656         status = "okay";
 657 };
 658
 659 &ufs_mem_phy {
 660         vdda-phy-supply = <&vreg_l6b>;
 661         vdda-pll-supply = <&vreg_l3b>;
 662
 663         status = "okay";
 664 };
 665
 666 &usb_0 {
 667         status = "okay";
 668 };
 669
 670 &usb_0_dwc3 {
 671         dr_mode = "host";
 672 };
 673
 674 &usb_0_hsphy {
 675         vdda-pll-supply = <&vreg_l9d>;
 676         vdda18-supply = <&vreg_l1c>;
 677         vdda33-supply = <&vreg_l7d>;
 678
 679         status = "okay";
 680 };
 681
 682 &usb_0_qmpphy {
 683         vdda-phy-supply = <&vreg_l9d>;
 684         vdda-pll-supply = <&vreg_l4d>;
 685
 686         orientation-switch;
 687
 688         status = "okay";
 689 };
 690
 691 &usb_0_qmpphy_dp_in {
 692         remote-endpoint = <&mdss0_dp0_out>;
 693 };
 694
 695 &usb_0_qmpphy_out {
 696         remote-endpoint = <&pmic_glink_con0_ss>;
 697 };
 698
 699 &usb_0_role_switch {
 700         remote-endpoint = <&pmic_glink_con0_hs>;
 701 };
 702
 703 &usb_1 {
 704         status = "okay";
 705 };
 706
 707 &usb_1_dwc3 {
 708         dr_mode = "host";
 709 };
 710
 711 &usb_1_hsphy {
 712         vdda-pll-supply = <&vreg_l4b>;
 713         vdda18-supply = <&vreg_l1c>;
 714         vdda33-supply = <&vreg_l13c>;
 715
 716         status = "okay";
 717 };
 718
 719 &usb_1_qmpphy {
 720         vdda-phy-supply = <&vreg_l4b>;
 721         vdda-pll-supply = <&vreg_l3b>;
 722
 723         orientation-switch;
 724
 725         status = "okay";
 726 };
 727
 728 &usb_1_qmpphy_dp_in {
 729         remote-endpoint = <&mdss0_dp1_out>;
 730 };
 731
 732 &usb_1_qmpphy_out {
 733         remote-endpoint = <&pmic_glink_con1_ss>;
 734 };
 735
 736 &usb_1_role_switch {
 737         remote-endpoint = <&pmic_glink_con1_hs>;
 738 };
 739
 740 &xo_board_clk {
 741         clock-frequency = <38400000>;
 742 };
 743
 744 /* PINCTRL - additions to nodes defined in sc8280xp.dtsi */
 745
 746 &pmc8280_1_gpios {
 747         edp_bl_en: edp-bl-en-state {
 748                 pins = "gpio8";
 749                 function = "normal";
 750         };
 751
 752         edp_bl_reg_en: edp-bl-reg-en-state {
 753                 pins = "gpio9";
 754                 function = "normal";
 755         };
 756
 757         misc_3p3_reg_en: misc-3p3-reg-en-state {
 758                 pins = "gpio2";
 759                 function = "normal";
 760         };
 761 };
 762
 763 &pmc8280_2_gpios {
 764         wwan_sw_en: wwan-sw-en-state {
 765                 pins = "gpio1";
 766                 function = "normal";
 767         };
 768 };
 769
 770 &pmc8280c_gpios {
 771         edp_bl_pwm: edp-bl-pwm-state {
 772                 pins = "gpio8";
 773                 function = "func1";
 774         };
 775 };
 776
 777 &pmr735a_gpios {
 778         hastings_reg_en: hastings-reg-en-state {
 779                 pins = "gpio1";
 780                 function = "normal";
 781         };
 782 };
 783
 784 &tlmm {
 785         gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 786
 787         edp_reg_en: edp-reg-en-state {
 788                 pins = "gpio25";
 789                 function = "gpio";
 790                 drive-strength = <16>;
 791                 bias-disable;
 792         };
 793
 794         i2c4_default: i2c4-default-state {
 795                 pins = "gpio171", "gpio172";
 796                 function = "qup4";
 797                 drive-strength = <16>;
 798                 bias-disable;
 799         };
 800
 801         i2c21_default: i2c21-default-state {
 802                 pins = "gpio81", "gpio82";
 803                 function = "qup21";
 804                 drive-strength = <16>;
 805                 bias-disable;
 806         };
 807
 808         kybd_default: kybd-default-state {
 809                 disable-pins {
 810                         pins = "gpio102";
 811                         function = "gpio";
 812                         output-low;
 813                 };
 814
 815                 int-n-pins {
 816                         pins = "gpio104";
 817                         function = "gpio";
 818                         bias-disable;
 819                 };
 820
 821                 reset-pins {
 822                         pins = "gpio105";
 823                         function = "gpio";
 824                         bias-disable;
 825                 };
 826         };
 827
 828         nvme_reg_en: nvme-reg-en-state {
 829                 pins = "gpio135";
 830                 function = "gpio";
 831                 drive-strength = <2>;
 832                 bias-disable;
 833         };
 834
 835         pcie2a_default: pcie2a-default-state {
 836                 clkreq-n-pins {
 837                         pins = "gpio142";
 838                         function = "pcie2a_clkreq";
 839                         drive-strength = <2>;
 840                         bias-pull-up;
 841                 };
 842
 843                 perst-n-pins {
 844                         pins = "gpio143";
 845                         function = "gpio";
 846                         drive-strength = <2>;
 847                         bias-pull-down;
 848                 };
 849
 850                 wake-n-pins {
 851                        pins = "gpio145";
 852                        function = "gpio";
 853                        drive-strength = <2>;
 854                        bias-pull-up;
 855                };
 856         };
 857
 858         pcie3a_default: pcie3a-default-state {
 859                 clkreq-n-pins {
 860                         pins = "gpio150";
 861                         function = "pcie3a_clkreq";
 862                         drive-strength = <2>;
 863                         bias-pull-up;
 864                 };
 865
 866                 perst-n-pins {
 867                         pins = "gpio151";
 868                         function = "gpio";
 869                         drive-strength = <2>;
 870                         bias-pull-down;
 871                 };
 872
 873                 wake-n-pins {
 874                         pins = "gpio148";
 875                         function = "gpio";
 876                         drive-strength = <2>;
 877                         bias-pull-up;
 878                 };
 879         };
 880
 881         pcie4_default: pcie4-default-state {
 882                 clkreq-n-pins {
 883                         pins = "gpio140";
 884                         function = "pcie4_clkreq";
 885                         drive-strength = <2>;
 886                         bias-pull-up;
 887                 };
 888
 889                 perst-n-pins {
 890                         pins = "gpio141";
 891                         function = "gpio";
 892                         drive-strength = <2>;
 893                         bias-pull-down;
 894                 };
 895
 896                 wake-n-pins {
 897                         pins = "gpio139";
 898                         function = "gpio";
 899                         drive-strength = <2>;
 900                         bias-pull-up;
 901                 };
 902         };
 903
 904         sdc2_default_state: sdc2-default-state {
 905                 clk-pins {
 906                         pins = "sdc2_clk";
 907                         drive-strength = <16>;
 908                         bias-disable;
 909                 };
 910
 911                 cmd-pins {
 912                         pins = "sdc2_cmd";
 913                         drive-strength = <16>;
 914                         bias-pull-up;
 915                 };
 916
 917                 data-pins {
 918                         pins = "sdc2_data";
 919                         drive-strength = <16>;
 920                         bias-pull-up;
 921                 };
 922
 923                 card-detect-pins {
 924                         pins = "gpio131";
 925                         function = "gpio";
 926                         drive-strength = <2>;
 927                         bias-disable;
 928                 };
 929         };
 930
 931         sdc2_sleep_state: sdc2-sleep-state {
 932                 clk-pins {
 933                         pins = "sdc2_clk";
 934                         drive-strength = <2>;
 935                         bias-disable;
 936                 };
 937
 938                 cmd-pins {
 939                         pins = "sdc2_cmd";
 940                         drive-strength = <2>;
 941                         bias-pull-up;
 942                 };
 943
 944                 data-pins {
 945                         pins = "sdc2_data";
 946                         drive-strength = <2>;
 947                         bias-pull-up;
 948                 };
 949
 950                 card-detect-pins {
 951                         pins = "gpio131";
 952                         function = "gpio";
 953                         drive-strength = <2>;
 954                         bias-disable;
 955                 };
 956         };
 957
 958         tpad_default: tpad-default-state {
 959                 int-n-pins {
 960                         pins = "gpio182";
 961                         function = "gpio";
 962                         bias-disable;
 963                 };
 964         };
 965
 966         ts0_default: ts0-default-state {
 967                 int-n-pins {
 968                         pins = "gpio175";
 969                         function = "gpio";
 970                         bias-disable;
 971                 };
 972
 973                 reset-n-pins {
 974                         pins = "gpio99";
 975                         function = "gpio";
 976                         output-high;
 977                         drive-strength = <16>;
 978                 };
 979         };
 980
 981         usb0_sbu_default: usb0-sbu-state {
 982                 oe-n-pins {
 983                         pins = "gpio101";
 984                         function = "gpio";
 985                         bias-disable;
 986                         drive-strength = <16>;
 987                         output-high;
 988                 };
 989
 990                 sel-pins {
 991                         pins = "gpio164";
 992                         function = "gpio";
 993                         bias-disable;
 994                         drive-strength = <16>;
 995                 };
 996
 997                 mode-pins {
 998                         pins = "gpio167";
 999                         function = "gpio";
1000                         bias-disable;
1001                         drive-strength = <16>;
1002                         output-high;
1003                 };
1004         };
1005
1006         usb1_sbu_default: usb1-sbu-state {
1007                 oe-n-pins {
1008                         pins = "gpio48";
1009                         function = "gpio";
1010                         bias-disable;
1011                         drive-strength = <16>;
1012                         output-high;
1013                 };
1014
1015                 sel-pins {
1016                         pins = "gpio47";
1017                         function = "gpio";
1018                         bias-disable;
1019                         drive-strength = <16>;
1020                 };
1021
1022                 mode-pins {
1023                         pins = "gpio50";
1024                         function = "gpio";
1025                         bias-disable;
1026                         drive-strength = <16>;
1027                         output-high;
1028                 };
1029         };
1030 };