arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2023, Linaro Limited
   4  */
   5
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/spmi/spmi.h>
   8
   9 / {
  10         thermal-zones {
  11                 pmm8654au_0_thermal: pm8775-0-thermal {
  12                         polling-delay-passive = <100>;
  13                         polling-delay = <0>;
  14                         thermal-sensors = <&pmm8654au_0_temp_alarm>;
  15
  16                         trips {
  17                                 trip0 {
  18                                         temperature = <105000>;
  19                                         hysteresis = <0>;
  20                                         type = "passive";
  21                                 };
  22
  23                                 trip1 {
  24                                         temperature = <125000>;
  25                                         hysteresis = <0>;
  26                                         type = "critical";
  27                                 };
  28                         };
  29                 };
  30
  31                 pmm8654au_1_thermal: pm8775-1-thermal {
  32                         polling-delay-passive = <100>;
  33                         polling-delay = <0>;
  34                         thermal-sensors = <&pmm8654au_1_temp_alarm>;
  35
  36                         trips {
  37                                 trip0 {
  38                                         temperature = <105000>;
  39                                         hysteresis = <0>;
  40                                         type = "passive";
  41                                 };
  42
  43                                 trip1 {
  44                                         temperature = <125000>;
  45                                         hysteresis = <0>;
  46                                         type = "critical";
  47                                 };
  48                         };
  49                 };
  50
  51                 pmm8654au_2_thermal: pm8775-2-thermal {
  52                         polling-delay-passive = <100>;
  53                         polling-delay = <0>;
  54                         thermal-sensors = <&pmm8654au_2_temp_alarm>;
  55
  56                         trips {
  57                                 trip0 {
  58                                         temperature = <105000>;
  59                                         hysteresis = <0>;
  60                                         type = "passive";
  61                                 };
  62
  63                                 trip1 {
  64                                         temperature = <125000>;
  65                                         hysteresis = <0>;
  66                                         type = "critical";
  67                                 };
  68                         };
  69                 };
  70
  71                 pmm8654au_3_thermal: pm8775-3-thermal {
  72                         polling-delay-passive = <100>;
  73                         polling-delay = <0>;
  74                         thermal-sensors = <&pmm8654au_3_temp_alarm>;
  75
  76                         trips {
  77                                 trip0 {
  78                                         temperature = <105000>;
  79                                         hysteresis = <0>;
  80                                         type = "passive";
  81                                 };
  82
  83                                 trip1 {
  84                                         temperature = <125000>;
  85                                         hysteresis = <0>;
  86                                         type = "critical";
  87                                 };
  88                         };
  89                 };
  90         };
  91 };
  92
  93 &spmi_bus {
  94         pmm8654au_0: pmic@0 {
  95                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
  96                 reg = <0x0 SPMI_USID>;
  97                 #address-cells = <1>;
  98                 #size-cells = <0>;
  99
 100                 pmm8654au_0_temp_alarm: temp-alarm@a00 {
 101                         compatible = "qcom,spmi-temp-alarm";
 102                         reg = <0xa00>;
 103                         interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 104                         #thermal-sensor-cells = <0>;
 105                 };
 106
 107                 pmm8654au_0_pon: pon@1200 {
 108                         compatible = "qcom,pmk8350-pon";
 109                         reg = <0x1200>, <0x800>;
 110                         reg-names = "hlos", "pbs";
 111                         mode-recovery = <0x1>;
 112                         mode-bootloader = <0x2>;
 113
 114                         pmm8654au_0_pon_pwrkey: pwrkey {
 115                                 compatible = "qcom,pmk8350-pwrkey";
 116                                 interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
 117                                 linux,code = <KEY_POWER>;
 118                                 debounce = <15625>;
 119                         };
 120
 121                         pmm8654au_0_pon_resin: resin {
 122                                 compatible = "qcom,pmk8350-resin";
 123                                 interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>;
 124                                 debounce = <15625>;
 125                                 status = "disabled";
 126                         };
 127                 };
 128
 129                 pmm8654au_0_gpios: gpio@8800 {
 130                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 131                         reg = <0x8800>;
 132                         gpio-controller;
 133                         gpio-ranges = <&pmm8654au_0_gpios 0 0 12>;
 134                         #gpio-cells = <2>;
 135                         interrupt-controller;
 136                         #interrupt-cells = <2>;
 137                 };
 138         };
 139
 140         pmm8654au_1: pmic@2 {
 141                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 142                 reg = <0x2 SPMI_USID>;
 143                 #address-cells = <1>;
 144                 #size-cells = <0>;
 145
 146                 pmm8654au_1_temp_alarm: temp-alarm@a00 {
 147                         compatible = "qcom,spmi-temp-alarm";
 148                         reg = <0xa00>;
 149                         interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 150                         #thermal-sensor-cells = <0>;
 151                 };
 152
 153                 pmm8654au_1_gpios: gpio@8800 {
 154                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 155                         reg = <0x8800>;
 156                         gpio-controller;
 157                         gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
 158                         #gpio-cells = <2>;
 159                         interrupt-controller;
 160                         #interrupt-cells = <2>;
 161                 };
 162         };
 163
 164         pmm8654au_2: pmic@4 {
 165                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 166                 reg = <0x4 SPMI_USID>;
 167                 #address-cells = <1>;
 168                 #size-cells = <0>;
 169
 170                 pmm8654au_2_temp_alarm: temp-alarm@a00 {
 171                         compatible = "qcom,spmi-temp-alarm";
 172                         reg = <0xa00>;
 173                         interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 174                         #thermal-sensor-cells = <0>;
 175                 };
 176
 177                 pmm8654au_2_gpios: gpio@8800 {
 178                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 179                         reg = <0x8800>;
 180                         gpio-controller;
 181                         gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
 182                         #gpio-cells = <2>;
 183                         interrupt-controller;
 184                         #interrupt-cells = <2>;
 185                 };
 186         };
 187
 188         pmm8654au_3: pmic@6 {
 189                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 190                 reg = <0x6 SPMI_USID>;
 191                 #address-cells = <1>;
 192                 #size-cells = <0>;
 193
 194                 pmm8654au_3_temp_alarm: temp-alarm@a00 {
 195                         compatible = "qcom,spmi-temp-alarm";
 196                         reg = <0xa00>;
 197                         interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 198                         #thermal-sensor-cells = <0>;
 199                 };
 200
 201                 pmm8654au_3_gpios: gpio@8800 {
 202                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 203                         reg = <0x8800>;
 204                         gpio-controller;
 205                         gpio-ranges = <&pmm8654au_3_gpios 0 0 12>;
 206                         #gpio-cells = <2>;
 207                         interrupt-controller;
 208                         #interrupt-cells = <2>;
 209                 };
 210         };
 211 };