arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2023, Linaro Limited
   4  */
   5
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/spmi/spmi.h>
   8
   9 / {
  10         thermal-zones {
  11                 pmm8654au_0_thermal: pm8775-0-thermal {
  12                         polling-delay-passive = <100>;
  13                         polling-delay = <0>;
  14                         thermal-sensors = <&pmm8654au_0_temp_alarm>;
  15
  16                         trips {
  17                                 trip0 {
  18                                         temperature = <105000>;
  19                                         hysteresis = <0>;
  20                                         type = "passive";
  21                                 };
  22
  23                                 trip1 {
  24                                         temperature = <125000>;
  25                                         hysteresis = <0>;
  26                                         type = "critical";
  27                                 };
  28                         };
  29                 };
  30
  31                 pmm8654au_1_thermal: pm8775-1-thermal {
  32                         polling-delay-passive = <100>;
  33                         polling-delay = <0>;
  34                         thermal-sensors = <&pmm8654au_1_temp_alarm>;
  35
  36                         trips {
  37                                 trip0 {
  38                                         temperature = <105000>;
  39                                         hysteresis = <0>;
  40                                         type = "passive";
  41                                 };
  42
  43                                 trip1 {
  44                                         temperature = <125000>;
  45                                         hysteresis = <0>;
  46                                         type = "critical";
  47                                 };
  48                         };
  49                 };
  50
  51                 pmm8654au_2_thermal: pm8775-2-thermal {
  52                         polling-delay-passive = <100>;
  53                         polling-delay = <0>;
  54                         thermal-sensors = <&pmm8654au_2_temp_alarm>;
  55
  56                         trips {
  57                                 trip0 {
  58                                         temperature = <105000>;
  59                                         hysteresis = <0>;
  60                                         type = "passive";
  61                                 };
  62
  63                                 trip1 {
  64                                         temperature = <125000>;
  65                                         hysteresis = <0>;
  66                                         type = "critical";
  67                                 };
  68                         };
  69                 };
  70
  71                 pmm8654au_3_thermal: pm8775-3-thermal {
  72                         polling-delay-passive = <100>;
  73                         polling-delay = <0>;
  74                         thermal-sensors = <&pmm8654au_3_temp_alarm>;
  75
  76                         trips {
  77                                 trip0 {
  78                                         temperature = <105000>;
  79                                         hysteresis = <0>;
  80                                         type = "passive";
  81                                 };
  82
  83                                 trip1 {
  84                                         temperature = <125000>;
  85                                         hysteresis = <0>;
  86                                         type = "critical";
  87                                 };
  88                         };
  89                 };
  90         };
  91
  92         reboot-mode {
  93                 compatible = "nvmem-reboot-mode";
  94                 nvmem-cells = <&reboot_reason>;
  95                 nvmem-cell-names = "reboot-mode";
  96                 mode-recovery = <0x01>;
  97                 mode-bootloader = <0x02>;
  98         };
  99 };
 100
 101 &spmi_bus {
 102         pmm8654au_0: pmic@0 {
 103                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 104                 reg = <0x0 SPMI_USID>;
 105                 #address-cells = <1>;
 106                 #size-cells = <0>;
 107
 108                 pmm8654au_0_temp_alarm: temp-alarm@a00 {
 109                         compatible = "qcom,spmi-temp-alarm";
 110                         reg = <0xa00>;
 111                         interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 112                         #thermal-sensor-cells = <0>;
 113                 };
 114
 115                 pmm8654au_0_pon: pon@1200 {
 116                         compatible = "qcom,pmk8350-pon";
 117                         reg = <0x1200>, <0x800>;
 118                         reg-names = "hlos", "pbs";
 119
 120                         pmm8654au_0_pon_pwrkey: pwrkey {
 121                                 compatible = "qcom,pmk8350-pwrkey";
 122                                 interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
 123                                 linux,code = <KEY_POWER>;
 124                                 debounce = <15625>;
 125                         };
 126
 127                         pmm8654au_0_pon_resin: resin {
 128                                 compatible = "qcom,pmk8350-resin";
 129                                 interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>;
 130                                 debounce = <15625>;
 131                                 status = "disabled";
 132                         };
 133                 };
 134
 135                 pmm8654au_0_gpios: gpio@8800 {
 136                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 137                         reg = <0x8800>;
 138                         gpio-controller;
 139                         gpio-ranges = <&pmm8654au_0_gpios 0 0 12>;
 140                         #gpio-cells = <2>;
 141                         interrupt-controller;
 142                         #interrupt-cells = <2>;
 143                 };
 144
 145                 pmm8654au_0_sdam_0: nvram@7100 {
 146                         compatible = "qcom,spmi-sdam";
 147                         reg = <0x7100>;
 148                         #address-cells = <1>;
 149                         #size-cells = <1>;
 150                         ranges = <0 0x7100 0x100>;
 151
 152                         reboot_reason: reboot-reason@48 {
 153                                 reg = <0x48 0x1>;
 154                                 bits = <1 7>;
 155                         };
 156                 };
 157         };
 158
 159         pmm8654au_1: pmic@2 {
 160                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 161                 reg = <0x2 SPMI_USID>;
 162                 #address-cells = <1>;
 163                 #size-cells = <0>;
 164
 165                 pmm8654au_1_temp_alarm: temp-alarm@a00 {
 166                         compatible = "qcom,spmi-temp-alarm";
 167                         reg = <0xa00>;
 168                         interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 169                         #thermal-sensor-cells = <0>;
 170                 };
 171
 172                 pmm8654au_1_gpios: gpio@8800 {
 173                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 174                         reg = <0x8800>;
 175                         gpio-controller;
 176                         gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
 177                         #gpio-cells = <2>;
 178                         interrupt-controller;
 179                         #interrupt-cells = <2>;
 180                 };
 181         };
 182
 183         pmm8654au_2: pmic@4 {
 184                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 185                 reg = <0x4 SPMI_USID>;
 186                 #address-cells = <1>;
 187                 #size-cells = <0>;
 188
 189                 pmm8654au_2_temp_alarm: temp-alarm@a00 {
 190                         compatible = "qcom,spmi-temp-alarm";
 191                         reg = <0xa00>;
 192                         interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 193                         #thermal-sensor-cells = <0>;
 194                 };
 195
 196                 pmm8654au_2_gpios: gpio@8800 {
 197                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 198                         reg = <0x8800>;
 199                         gpio-controller;
 200                         gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
 201                         #gpio-cells = <2>;
 202                         interrupt-controller;
 203                         #interrupt-cells = <2>;
 204                 };
 205         };
 206
 207         pmm8654au_3: pmic@6 {
 208                 compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 209                 reg = <0x6 SPMI_USID>;
 210                 #address-cells = <1>;
 211                 #size-cells = <0>;
 212
 213                 pmm8654au_3_temp_alarm: temp-alarm@a00 {
 214                         compatible = "qcom,spmi-temp-alarm";
 215                         reg = <0xa00>;
 216                         interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 217                         #thermal-sensor-cells = <0>;
 218                 };
 219
 220                 pmm8654au_3_gpios: gpio@8800 {
 221                         compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 222                         reg = <0x8800>;
 223                         gpio-controller;
 224                         gpio-ranges = <&pmm8654au_3_gpios 0 0 12>;
 225                         #gpio-cells = <2>;
 226                         interrupt-controller;
 227                         #interrupt-cells = <2>;
 228                 };
 229         };
 230 };