arch/arm64/boot/dts/qcom/msm8994.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
   3  */
   4
   5 #include <dt-bindings/interrupt-controller/arm-gic.h>
   6 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
   7 #include <dt-bindings/clock/qcom,mmcc-msm8994.h>
   8 #include <dt-bindings/clock/qcom,rpmcc.h>
   9 #include <dt-bindings/power/qcom-rpmpd.h>
  10
  11 / {
  12         interrupt-parent = <&intc>;
  13
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16
  17         aliases {
  18                 mmc1 = &sdhc1;
  19                 mmc2 = &sdhc2;
  20         };
  21
  22         chosen { };
  23
  24         clocks {
  25                 xo_board: xo-board {
  26                         compatible = "fixed-clock";
  27                         #clock-cells = <0>;
  28                         clock-frequency = <19200000>;
  29                         clock-output-names = "xo_board";
  30                 };
  31
  32                 sleep_clk: sleep-clk {
  33                         compatible = "fixed-clock";
  34                         #clock-cells = <0>;
  35                         clock-frequency = <32768>;
  36                         clock-output-names = "sleep_clk";
  37                 };
  38         };
  39
  40         cpus {
  41                 #address-cells = <2>;
  42                 #size-cells = <0>;
  43
  44                 CPU0: cpu@0 {
  45                         device_type = "cpu";
  46                         compatible = "arm,cortex-a53";
  47                         reg = <0x0 0x0>;
  48                         enable-method = "psci";
  49                         next-level-cache = <&L2_0>;
  50                         L2_0: l2-cache {
  51                                 compatible = "cache";
  52                                 cache-level = <2>;
  53                         };
  54                 };
  55
  56                 CPU1: cpu@1 {
  57                         device_type = "cpu";
  58                         compatible = "arm,cortex-a53";
  59                         reg = <0x0 0x1>;
  60                         enable-method = "psci";
  61                         next-level-cache = <&L2_0>;
  62                 };
  63
  64                 CPU2: cpu@2 {
  65                         device_type = "cpu";
  66                         compatible = "arm,cortex-a53";
  67                         reg = <0x0 0x2>;
  68                         enable-method = "psci";
  69                         next-level-cache = <&L2_0>;
  70                 };
  71
  72                 CPU3: cpu@3 {
  73                         device_type = "cpu";
  74                         compatible = "arm,cortex-a53";
  75                         reg = <0x0 0x3>;
  76                         enable-method = "psci";
  77                         next-level-cache = <&L2_0>;
  78                 };
  79
  80                 CPU4: cpu@100 {
  81                         device_type = "cpu";
  82                         compatible = "arm,cortex-a57";
  83                         reg = <0x0 0x100>;
  84                         enable-method = "psci";
  85                         next-level-cache = <&L2_1>;
  86                         L2_1: l2-cache {
  87                                 compatible = "cache";
  88                                 cache-level = <2>;
  89                         };
  90                 };
  91
  92                 CPU5: cpu@101 {
  93                         device_type = "cpu";
  94                         compatible = "arm,cortex-a57";
  95                         reg = <0x0 0x101>;
  96                         enable-method = "psci";
  97                         next-level-cache = <&L2_1>;
  98                 };
  99
 100                 CPU6: cpu@102 {
 101                         device_type = "cpu";
 102                         compatible = "arm,cortex-a57";
 103                         reg = <0x0 0x101>;
 104                         enable-method = "psci";
 105                         next-level-cache = <&L2_1>;
 106                 };
 107
 108                 CPU7: cpu@103 {
 109                         device_type = "cpu";
 110                         compatible = "arm,cortex-a57";
 111                         reg = <0x0 0x101>;
 112                         enable-method = "psci";
 113                         next-level-cache = <&L2_1>;
 114                 };
 115
 116                 cpu-map {
 117                         cluster0 {
 118                                 core0 {
 119                                         cpu = <&CPU0>;
 120                                 };
 121
 122                                 core1 {
 123                                         cpu = <&CPU1>;
 124                                 };
 125
 126                                 core2 {
 127                                         cpu = <&CPU2>;
 128                                 };
 129
 130                                 core3 {
 131                                         cpu = <&CPU3>;
 132                                 };
 133                         };
 134
 135                         cluster1 {
 136                                 core0 {
 137                                         cpu = <&CPU4>;
 138                                 };
 139
 140                                 core1 {
 141                                         cpu = <&CPU5>;
 142                                 };
 143
 144                                 cpu6_map: core2 {
 145                                         cpu = <&CPU6>;
 146                                 };
 147
 148                                 cpu7_map: core3 {
 149                                         cpu = <&CPU7>;
 150                                 };
 151                         };
 152                 };
 153         };
 154
 155         firmware {
 156                 scm {
 157                         compatible = "qcom,scm-msm8994", "qcom,scm";
 158                 };
 159         };
 160
 161         memory@80000000 {
 162                 device_type = "memory";
 163                 /* We expect the bootloader to fill in the reg */
 164                 reg = <0 0x80000000 0 0>;
 165         };
 166
 167         tcsr_mutex: hwlock {
 168                 compatible = "qcom,tcsr-mutex";
 169                 syscon = <&tcsr_mutex_regs 0 0x80>;
 170                 #hwlock-cells = <1>;
 171         };
 172
 173         pmu {
 174                 compatible = "arm,cortex-a53-pmu";
 175                 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
 176         };
 177
 178         psci {
 179                 compatible = "arm,psci-0.2";
 180                 method = "hvc";
 181         };
 182
 183         reserved-memory {
 184                 #address-cells = <2>;
 185                 #size-cells = <2>;
 186                 ranges;
 187
 188                 dfps_data_mem: dfps_data_mem@3400000 {
 189                         reg = <0 0x03400000 0 0x1000>;
 190                         no-map;
 191                 };
 192
 193                 cont_splash_mem: memory@3401000 {
 194                         reg = <0 0x03401000 0 0x2200000>;
 195                         no-map;
 196                 };
 197
 198                 smem_mem: smem_region@6a00000 {
 199                         reg = <0 0x06a00000 0 0x200000>;
 200                         no-map;
 201                 };
 202
 203                 mpss_mem: memory@7000000 {
 204                         reg = <0 0x07000000 0 0x5a00000>;
 205                         no-map;
 206                 };
 207
 208                 peripheral_region: memory@ca00000 {
 209                         reg = <0 0x0ca00000 0 0x1f00000>;
 210                         no-map;
 211                 };
 212
 213                 rmtfs_mem: memory@c6400000 {
 214                         compatible = "qcom,rmtfs-mem";
 215                         reg = <0 0xc6400000 0 0x180000>;
 216                         no-map;
 217
 218                         qcom,client-id = <1>;
 219                 };
 220
 221                 mba_mem: memory@c6700000 {
 222                         reg = <0 0xc6700000 0 0x100000>;
 223                         no-map;
 224                 };
 225
 226                 audio_mem: memory@c7000000 {
 227                         reg = <0 0xc7000000 0 0x800000>;
 228                         no-map;
 229                 };
 230
 231                 adsp_mem: memory@c9400000 {
 232                         reg = <0 0xc9400000 0 0x3f00000>;
 233                         no-map;
 234                 };
 235         };
 236
 237         smd {
 238                 compatible = "qcom,smd";
 239                 rpm {
 240                         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 241                         qcom,ipc = <&apcs 8 0>;
 242                         qcom,smd-edge = <15>;
 243                         qcom,remote-pid = <6>;
 244
 245                         rpm_requests: rpm-requests {
 246                                 compatible = "qcom,rpm-msm8994";
 247                                 qcom,smd-channels = "rpm_requests";
 248
 249                                 rpmcc: rpmcc {
 250                                         compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
 251                                         #clock-cells = <1>;
 252                                 };
 253
 254                                 rpmpd: power-controller {
 255                                         compatible = "qcom,msm8994-rpmpd";
 256                                         #power-domain-cells = <1>;
 257                                         operating-points-v2 = <&rpmpd_opp_table>;
 258
 259                                         rpmpd_opp_table: opp-table {
 260                                                 compatible = "operating-points-v2";
 261
 262                                                 rpmpd_opp_ret: opp1 {
 263                                                         opp-level = <1>;
 264                                                 };
 265                                                 rpmpd_opp_svs_krait: opp2 {
 266                                                         opp-level = <2>;
 267                                                 };
 268                                                 rpmpd_opp_svs_soc: opp3 {
 269                                                         opp-level = <3>;
 270                                                 };
 271                                                 rpmpd_opp_nom: opp4 {
 272                                                         opp-level = <4>;
 273                                                 };
 274                                                 rpmpd_opp_turbo: opp5 {
 275                                                         opp-level = <5>;
 276                                                 };
 277                                                 rpmpd_opp_super_turbo: opp6 {
 278                                                         opp-level = <6>;
 279                                                 };
 280                                         };
 281                                 };
 282                         };
 283                 };
 284         };
 285
 286         smem {
 287                 compatible = "qcom,smem";
 288                 memory-region = <&smem_mem>;
 289                 qcom,rpm-msg-ram = <&rpm_msg_ram>;
 290                 hwlocks = <&tcsr_mutex 3>;
 291         };
 292
 293         smp2p-lpass {
 294                 compatible = "qcom,smp2p";
 295                 qcom,smem = <443>, <429>;
 296
 297                 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 298
 299                 qcom,ipc = <&apcs 8 10>;
 300
 301                 qcom,local-pid = <0>;
 302                 qcom,remote-pid = <2>;
 303
 304                 adsp_smp2p_out: master-kernel {
 305                         qcom,entry-name = "master-kernel";
 306                         #qcom,smem-state-cells = <1>;
 307                 };
 308
 309                 adsp_smp2p_in: slave-kernel {
 310                         qcom,entry-name = "slave-kernel";
 311
 312                         interrupt-controller;
 313                         #interrupt-cells = <2>;
 314                 };
 315         };
 316
 317         smp2p-modem {
 318                 compatible = "qcom,smp2p";
 319                 qcom,smem = <435>, <428>;
 320
 321                 interrupt-parent = <&intc>;
 322                 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 323
 324                 qcom,ipc = <&apcs 8 14>;
 325
 326                 qcom,local-pid = <0>;
 327                 qcom,remote-pid = <1>;
 328
 329                 modem_smp2p_out: master-kernel {
 330                         qcom,entry-name = "master-kernel";
 331                         #qcom,smem-state-cells = <1>;
 332                 };
 333
 334                 modem_smp2p_in: slave-kernel {
 335                         qcom,entry-name = "slave-kernel";
 336
 337                         interrupt-controller;
 338                         #interrupt-cells = <2>;
 339                 };
 340         };
 341
 342         soc: soc {
 343
 344                 #address-cells = <1>;
 345                 #size-cells = <1>;
 346                 ranges = <0 0 0 0xffffffff>;
 347                 compatible = "simple-bus";
 348
 349                 intc: interrupt-controller@f9000000 {
 350                         compatible = "qcom,msm-qgic2";
 351                         interrupt-controller;
 352                         #interrupt-cells = <3>;
 353                         reg = <0xf9000000 0x1000>,
 354                               <0xf9002000 0x1000>;
 355                 };
 356
 357                 apcs: mailbox@f900d000 {
 358                         compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
 359                         reg = <0xf900d000 0x2000>;
 360                         #mbox-cells = <1>;
 361                 };
 362
 363                 watchdog@f9017000 {
 364                         compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt";
 365                         reg = <0xf9017000 0x1000>;
 366                         interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
 367                                      <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
 368                         clocks = <&sleep_clk>;
 369                         timeout-sec = <10>;
 370                 };
 371
 372                 timer@f9020000 {
 373                         #address-cells = <1>;
 374                         #size-cells = <1>;
 375                         ranges;
 376                         compatible = "arm,armv7-timer-mem";
 377                         reg = <0xf9020000 0x1000>;
 378
 379                         frame@f9021000 {
 380                                 frame-number = <0>;
 381                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 382                                              <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 383                                 reg = <0xf9021000 0x1000>,
 384                                       <0xf9022000 0x1000>;
 385                         };
 386
 387                         frame@f9023000 {
 388                                 frame-number = <1>;
 389                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 390                                 reg = <0xf9023000 0x1000>;
 391                                 status = "disabled";
 392                         };
 393
 394                         frame@f9024000 {
 395                                 frame-number = <2>;
 396                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 397                                 reg = <0xf9024000 0x1000>;
 398                                 status = "disabled";
 399                         };
 400
 401                         frame@f9025000 {
 402                                 frame-number = <3>;
 403                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 404                                 reg = <0xf9025000 0x1000>;
 405                                 status = "disabled";
 406                         };
 407
 408                         frame@f9026000 {
 409                                 frame-number = <4>;
 410                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 411                                 reg = <0xf9026000 0x1000>;
 412                                 status = "disabled";
 413                         };
 414
 415                         frame@f9027000 {
 416                                 frame-number = <5>;
 417                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 418                                 reg = <0xf9027000 0x1000>;
 419                                 status = "disabled";
 420                         };
 421
 422                         frame@f9028000 {
 423                                 frame-number = <6>;
 424                                 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 425                                 reg = <0xf9028000 0x1000>;
 426                                 status = "disabled";
 427                         };
 428                 };
 429
 430                 usb3: usb@f92f8800 {
 431                         compatible = "qcom,msm8994-dwc3", "qcom,dwc3";
 432                         reg = <0xf92f8800 0x400>;
 433                         #address-cells = <1>;
 434                         #size-cells = <1>;
 435                         ranges;
 436
 437                         clocks = <&gcc GCC_USB30_MASTER_CLK>,
 438                                  <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 439                                  <&gcc GCC_USB30_SLEEP_CLK>,
 440                                  <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 441                         clock-names = "core",
 442                                       "iface",
 443                                       "sleep",
 444                                       "mock_utmi";
 445
 446                         assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 447                                           <&gcc GCC_USB30_MASTER_CLK>;
 448                         assigned-clock-rates = <19200000>, <120000000>;
 449
 450                         power-domains = <&gcc USB30_GDSC>;
 451                         qcom,select-utmi-as-pipe-clk;
 452
 453                         usb@f9200000 {
 454                                 compatible = "snps,dwc3";
 455                                 reg = <0xf9200000 0xcc00>;
 456                                 interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 457                                 snps,dis_u2_susphy_quirk;
 458                                 snps,dis_enblslpm_quirk;
 459                                 maximum-speed = "high-speed";
 460                                 dr_mode = "peripheral";
 461                         };
 462                 };
 463
 464                 sdhc1: sdhci@f9824900 {
 465                         compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
 466                         reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
 467                         reg-names = "hc_mem", "core_mem";
 468
 469                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 470                                      <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 471                         interrupt-names = "hc_irq", "pwr_irq";
 472
 473                         clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 474                                  <&gcc GCC_SDCC1_AHB_CLK>,
 475                                  <&xo_board>;
 476                         clock-names = "core", "iface", "xo";
 477
 478                         pinctrl-names = "default", "sleep";
 479                         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
 480                         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
 481
 482                         bus-width = <8>;
 483                         non-removable;
 484                         status = "disabled";
 485                 };
 486
 487                 sdhc2: sdhci@f98a4900 {
 488                         compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
 489                         reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 490                         reg-names = "hc_mem", "core_mem";
 491
 492                         interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
 493                                 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 494                         interrupt-names = "hc_irq", "pwr_irq";
 495
 496                         clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 497                                 <&gcc GCC_SDCC2_AHB_CLK>,
 498                                 <&xo_board>;
 499                         clock-names = "core", "iface", "xo";
 500
 501                         pinctrl-names = "default", "sleep";
 502                         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
 503                         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
 504
 505                         cd-gpios = <&tlmm 100 0>;
 506                         bus-width = <4>;
 507                         status = "disabled";
 508                 };
 509
 510                 blsp1_dma: dma-controller@f9904000 {
 511                         compatible = "qcom,bam-v1.7.0";
 512                         reg = <0xf9904000 0x19000>;
 513                         interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 514                         clocks = <&gcc GCC_BLSP1_AHB_CLK>;
 515                         clock-names = "bam_clk";
 516                         #dma-cells = <1>;
 517                         qcom,ee = <0>;
 518                         qcom,controlled-remotely;
 519                         num-channels = <24>;
 520                         qcom,num-ees = <4>;
 521                 };
 522
 523                 blsp1_uart2: serial@f991e000 {
 524                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 525                         reg = <0xf991e000 0x1000>;
 526                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 527                         clock-names = "core", "iface";
 528                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 529                                  <&gcc GCC_BLSP1_AHB_CLK>;
 530                         pinctrl-names = "default", "sleep";
 531                         pinctrl-0 = <&blsp1_uart2_default>;
 532                         pinctrl-1 = <&blsp1_uart2_sleep>;
 533                         status = "disabled";
 534                 };
 535
 536                 blsp1_i2c1: i2c@f9923000 {
 537                         compatible = "qcom,i2c-qup-v2.2.1";
 538                         reg = <0xf9923000 0x500>;
 539                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 540                         clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
 541                                  <&gcc GCC_BLSP1_AHB_CLK>;
 542                         clock-names = "core", "iface";
 543                         clock-frequency = <400000>;
 544                         dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
 545                         dma-names = "tx", "rx";
 546                         pinctrl-names = "default", "sleep";
 547                         pinctrl-0 = <&i2c1_default>;
 548                         pinctrl-1 = <&i2c1_sleep>;
 549                         #address-cells = <1>;
 550                         #size-cells = <0>;
 551                         status = "disabled";
 552                 };
 553
 554                 blsp1_spi1: spi@f9923000 {
 555                         compatible = "qcom,spi-qup-v2.2.1";
 556                         reg = <0xf9923000 0x500>;
 557                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 558                         clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 559                                  <&gcc GCC_BLSP1_AHB_CLK>;
 560                         clock-names = "core", "iface";
 561                         spi-max-frequency = <19200000>;
 562                         dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
 563                         dma-names = "tx", "rx";
 564                         pinctrl-names = "default", "sleep";
 565                         pinctrl-0 = <&blsp1_spi1_default>;
 566                         pinctrl-1 = <&blsp1_spi1_sleep>;
 567                         #address-cells = <1>;
 568                         #size-cells = <0>;
 569                         status = "disabled";
 570                 };
 571
 572                 blsp1_i2c2: i2c@f9924000 {
 573                         compatible = "qcom,i2c-qup-v2.2.1";
 574                         reg = <0xf9924000 0x500>;
 575                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 576                         clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
 577                                  <&gcc GCC_BLSP1_AHB_CLK>;
 578                         clock-names = "core", "iface";
 579                         clock-frequency = <400000>;
 580                         dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
 581                         dma-names = "tx", "rx";
 582                         pinctrl-names = "default", "sleep";
 583                         pinctrl-0 = <&i2c2_default>;
 584                         pinctrl-1 = <&i2c2_sleep>;
 585                         #address-cells = <1>;
 586                         #size-cells = <0>;
 587                         status = "disabled";
 588                 };
 589
 590                 /* I2C3 doesn't exist */
 591
 592                 blsp1_i2c4: i2c@f9926000 {
 593                         compatible = "qcom,i2c-qup-v2.2.1";
 594                         reg = <0xf9926000 0x500>;
 595                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 596                         clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
 597                                  <&gcc GCC_BLSP1_AHB_CLK>;
 598                         clock-names = "core", "iface";
 599                         clock-frequency = <400000>;
 600                         dmas = <&blsp1_dma 18>, <&blsp1_dma 19>;
 601                         dma-names = "tx", "rx";
 602                         pinctrl-names = "default", "sleep";
 603                         pinctrl-0 = <&i2c4_default>;
 604                         pinctrl-1 = <&i2c4_sleep>;
 605                         #address-cells = <1>;
 606                         #size-cells = <0>;
 607                         status = "disabled";
 608                 };
 609
 610                 blsp1_i2c5: i2c@f9927000 {
 611                         compatible = "qcom,i2c-qup-v2.2.1";
 612                         reg = <0xf9927000 0x500>;
 613                         interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 614                         clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
 615                                  <&gcc GCC_BLSP1_AHB_CLK>;
 616                         clock-names = "core", "iface";
 617                         clock-frequency = <400000>;
 618                         dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
 619                         dma-names = "tx", "rx";
 620                         pinctrl-names = "default", "sleep";
 621                         pinctrl-0 = <&i2c5_default>;
 622                         pinctrl-1 = <&i2c5_sleep>;
 623                         #address-cells = <1>;
 624                         #size-cells = <0>;
 625                         status = "disabled";
 626                 };
 627
 628                 blsp1_i2c6: i2c@f9928000 {
 629                         compatible = "qcom,i2c-qup-v2.2.1";
 630                         reg = <0xf9928000 0x500>;
 631                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 632                         clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
 633                                  <&gcc GCC_BLSP1_AHB_CLK>;
 634                         clock-names = "core", "iface";
 635                         clock-frequency = <400000>;
 636                         dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
 637                         dma-names = "tx", "rx";
 638                         pinctrl-names = "default", "sleep";
 639                         pinctrl-0 = <&i2c6_default>;
 640                         pinctrl-1 = <&i2c6_sleep>;
 641                         #address-cells = <1>;
 642                         #size-cells = <0>;
 643                         status = "disabled";
 644                 };
 645
 646                 blsp2_dma: dma-controller@f9944000 {
 647                         compatible = "qcom,bam-v1.7.0";
 648                         reg = <0xf9944000 0x19000>;
 649                         interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
 650                         clocks = <&gcc GCC_BLSP2_AHB_CLK>;
 651                         clock-names = "bam_clk";
 652                         #dma-cells = <1>;
 653                         qcom,ee = <0>;
 654                         qcom,controlled-remotely;
 655                         num-channels = <24>;
 656                         qcom,num-ees = <4>;
 657                 };
 658
 659                 blsp2_uart2: serial@f995e000 {
 660                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 661                         reg = <0xf995e000 0x1000>;
 662                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 663                         clock-names = "core", "iface";
 664                         clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
 665                                         <&gcc GCC_BLSP2_AHB_CLK>;
 666                         dmas = <&blsp2_dma 2>, <&blsp2_dma 3>;
 667                         dma-names = "tx", "rx";
 668                         pinctrl-names = "default", "sleep";
 669                         pinctrl-0 = <&blsp2_uart2_default>;
 670                         pinctrl-1 = <&blsp2_uart2_sleep>;
 671                         status = "disabled";
 672                 };
 673
 674                 blsp2_i2c1: i2c@f9963000 {
 675                         compatible = "qcom,i2c-qup-v2.2.1";
 676                         reg = <0xf9963000 0x500>;
 677                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 678                         clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
 679                                  <&gcc GCC_BLSP2_AHB_CLK>;
 680                         clock-names = "core", "iface";
 681                         clock-frequency = <400000>;
 682                         dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
 683                         dma-names = "tx", "rx";
 684                         pinctrl-names = "default", "sleep";
 685                         pinctrl-0 = <&i2c7_default>;
 686                         pinctrl-1 = <&i2c7_sleep>;
 687                         #address-cells = <1>;
 688                         #size-cells = <0>;
 689                         status = "disabled";
 690                 };
 691
 692                 blsp2_spi4: spi@f9966000 {
 693                         compatible = "qcom,spi-qup-v2.2.1";
 694                         reg = <0xf9966000 0x500>;
 695                         interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 696                         clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
 697                                  <&gcc GCC_BLSP2_AHB_CLK>;
 698                         clock-names = "core", "iface";
 699                         spi-max-frequency = <19200000>;
 700                         dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
 701                         dma-names = "tx", "rx";
 702                         pinctrl-names = "default", "sleep";
 703                         pinctrl-0 = <&blsp2_spi10_default>;
 704                         pinctrl-1 = <&blsp2_spi10_sleep>;
 705                         #address-cells = <1>;
 706                         #size-cells = <0>;
 707                         status = "disabled";
 708                 };
 709
 710                 blsp2_i2c5: i2c@f9967000 {
 711                         compatible = "qcom,i2c-qup-v2.2.1";
 712                         reg = <0xf9967000 0x500>;
 713                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 714                         clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
 715                                  <&gcc GCC_BLSP2_AHB_CLK>;
 716                         clock-names = "core", "iface";
 717                         clock-frequency = <355000>;
 718                         dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
 719                         dma-names = "tx", "rx";
 720                         pinctrl-names = "default", "sleep";
 721                         pinctrl-0 = <&i2c11_default>;
 722                         pinctrl-1 = <&i2c11_sleep>;
 723                         #address-cells = <1>;
 724                         #size-cells = <0>;
 725                         status = "disabled";
 726                 };
 727
 728                 gcc: clock-controller@fc400000 {
 729                         compatible = "qcom,gcc-msm8994";
 730                         #clock-cells = <1>;
 731                         #reset-cells = <1>;
 732                         #power-domain-cells = <1>;
 733                         reg = <0xfc400000 0x2000>;
 734
 735                         clock-names = "xo", "sleep";
 736                         clocks = <&xo_board>, <&sleep_clk>;
 737                 };
 738
 739                 rpm_msg_ram: sram@fc428000 {
 740                         compatible = "qcom,rpm-msg-ram";
 741                         reg = <0xfc428000 0x4000>;
 742                 };
 743
 744                 restart@fc4ab000 {
 745                         compatible = "qcom,pshold";
 746                         reg = <0xfc4ab000 0x4>;
 747                 };
 748
 749                 spmi_bus: spmi@fc4c0000 {
 750                         compatible = "qcom,spmi-pmic-arb";
 751                         reg = <0xfc4cf000 0x1000>,
 752                               <0xfc4cb000 0x1000>,
 753                               <0xfc4ca000 0x1000>;
 754                         reg-names = "core", "intr", "cnfg";
 755                         interrupt-names = "periph_irq";
 756                         interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 757                         qcom,ee = <0>;
 758                         qcom,channel = <0>;
 759                         #address-cells = <2>;
 760                         #size-cells = <0>;
 761                         interrupt-controller;
 762                         #interrupt-cells = <4>;
 763                 };
 764
 765                 tcsr_mutex_regs: syscon@fd484000 {
 766                         compatible = "syscon";
 767                         reg = <0xfd484000 0x2000>;
 768                 };
 769
 770                 tlmm: pinctrl@fd510000 {
 771                         compatible = "qcom,msm8994-pinctrl";
 772                         reg = <0xfd510000 0x4000>;
 773                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 774                         gpio-controller;
 775                         gpio-ranges = <&tlmm 0 0 146>;
 776                         #gpio-cells = <2>;
 777                         interrupt-controller;
 778                         #interrupt-cells = <2>;
 779
 780                         blsp1_uart2_default: blsp1-uart2-default {
 781                                 function = "blsp_uart2";
 782                                 pins = "gpio4", "gpio5";
 783                                 drive-strength = <16>;
 784                                 bias-disable;
 785                         };
 786
 787                         blsp1_uart2_sleep: blsp1-uart2-sleep {
 788                                 function = "gpio";
 789                                 pins = "gpio4", "gpio5";
 790                                 drive-strength = <2>;
 791                                 bias-pull-down;
 792                         };
 793
 794                         blsp2_uart2_default: blsp2-uart2-default {
 795                                 function = "blsp_uart8";
 796                                 pins = "gpio45", "gpio46",
 797                                                 "gpio47", "gpio48";
 798                                 drive-strength = <16>;
 799                                 bias-disable;
 800                         };
 801
 802                         blsp2_uart2_sleep: blsp2-uart2-sleep {
 803                                 function = "gpio";
 804                                 pins = "gpio45", "gpio46",
 805                                                 "gpio47", "gpio48";
 806                                 drive-strength = <2>;
 807                                 bias-disable;
 808                         };
 809
 810                         i2c1_default: i2c1-default {
 811                                 function = "blsp_i2c1";
 812                                 pins = "gpio2", "gpio3";
 813                                 drive-strength = <2>;
 814                                 bias-disable;
 815                         };
 816
 817                         i2c1_sleep: i2c1-sleep {
 818                                 function = "gpio";
 819                                 pins = "gpio2", "gpio3";
 820                                 drive-strength = <2>;
 821                                 bias-disable;
 822                         };
 823
 824                         i2c2_default: i2c2-default {
 825                                 function = "blsp_i2c2";
 826                                 pins = "gpio6", "gpio7";
 827                                 drive-strength = <2>;
 828                                 bias-disable;
 829                         };
 830
 831                         i2c2_sleep: i2c2-sleep {
 832                                 function = "gpio";
 833                                 pins = "gpio6", "gpio7";
 834                                 drive-strength = <2>;
 835                                 bias-disable;
 836                         };
 837
 838                         i2c4_default: i2c4-default {
 839                                 function = "blsp_i2c4";
 840                                 pins = "gpio19", "gpio20";
 841                                 drive-strength = <2>;
 842                                 bias-disable;
 843                         };
 844
 845                         i2c4_sleep: i2c4-sleep {
 846                                 function = "gpio";
 847                                 pins = "gpio19", "gpio20";
 848                                 drive-strength = <2>;
 849                                 bias-pull-down;
 850                                 input-enable;
 851                         };
 852
 853                         i2c5_default: i2c5-default {
 854                                 function = "blsp_i2c5";
 855                                 pins = "gpio23", "gpio24";
 856                                 drive-strength = <2>;
 857                                 bias-disable;
 858                         };
 859
 860                         i2c5_sleep: i2c5-sleep {
 861                                 function = "gpio";
 862                                 pins = "gpio23", "gpio24";
 863                                 drive-strength = <2>;
 864                                 bias-disable;
 865                         };
 866
 867                         i2c6_default: i2c6-default {
 868                                 function = "blsp_i2c6";
 869                                 pins = "gpio28", "gpio27";
 870                                 drive-strength = <2>;
 871                                 bias-disable;
 872                         };
 873
 874                         i2c6_sleep: i2c6-sleep {
 875                                 function = "gpio";
 876                                 pins = "gpio28", "gpio27";
 877                                 drive-strength = <2>;
 878                                 bias-disable;
 879                         };
 880
 881                         i2c7_default: i2c7-default {
 882                                 function = "blsp_i2c7";
 883                                 pins = "gpio44", "gpio43";
 884                                 drive-strength = <2>;
 885                                 bias-disable;
 886                         };
 887
 888                         i2c7_sleep: i2c7-sleep {
 889                                 function = "gpio";
 890                                 pins = "gpio44", "gpio43";
 891                                 drive-strength = <2>;
 892                                 bias-disable;
 893                         };
 894
 895                         blsp2_spi10_default: blsp2-spi10-default {
 896                                 default {
 897                                         function = "blsp_spi10";
 898                                         pins = "gpio53", "gpio54", "gpio55";
 899                                         drive-strength = <10>;
 900                                         bias-pull-down;
 901                                 };
 902                                 cs {
 903                                         function = "gpio";
 904                                         pins = "gpio55";
 905                                         drive-strength = <2>;
 906                                         bias-disable;
 907                                 };
 908                         };
 909
 910                         blsp2_spi10_sleep: blsp2-spi10-sleep {
 911                                 pins = "gpio53", "gpio54", "gpio55";
 912                                 drive-strength = <2>;
 913                                 bias-disable;
 914                         };
 915
 916                         i2c11_default: i2c11-default {
 917                                 function = "blsp_i2c11";
 918                                 pins = "gpio83", "gpio84";
 919                                 drive-strength = <2>;
 920                                 bias-disable;
 921                         };
 922
 923                         i2c11_sleep: i2c11-sleep {
 924                                 function = "gpio";
 925                                 pins = "gpio83", "gpio84";
 926                                 drive-strength = <2>;
 927                                 bias-disable;
 928                         };
 929
 930                         blsp1_spi1_default: blsp1-spi1-default {
 931                                 default {
 932                                         function = "blsp_spi1";
 933                                         pins = "gpio0", "gpio1", "gpio3";
 934                                         drive-strength = <10>;
 935                                         bias-pull-down;
 936                                 };
 937                                 cs {
 938                                         function = "gpio";
 939                                         pins = "gpio8";
 940                                         drive-strength = <2>;
 941                                         bias-disable;
 942                                 };
 943                         };
 944
 945                         blsp1_spi1_sleep: blsp1-spi1-sleep {
 946                                 pins = "gpio0", "gpio1", "gpio3";
 947                                 drive-strength = <2>;
 948                                 bias-disable;
 949                         };
 950
 951                         sdc1_clk_on: clk-on {
 952                                 pins = "sdc1_clk";
 953                                 bias-disable;
 954                                 drive-strength = <16>;
 955                         };
 956
 957                         sdc1_clk_off: clk-off {
 958                                 pins = "sdc1_clk";
 959                                 bias-disable;
 960                                 drive-strength = <2>;
 961                         };
 962
 963                         sdc1_cmd_on: cmd-on {
 964                                 pins = "sdc1_cmd";
 965                                 bias-pull-up;
 966                                 drive-strength = <8>;
 967                         };
 968
 969                         sdc1_cmd_off: cmd-off {
 970                                 pins = "sdc1_cmd";
 971                                 bias-pull-up;
 972                                 drive-strength = <2>;
 973                         };
 974
 975                         sdc1_data_on: data-on {
 976                                 pins = "sdc1_data";
 977                                 bias-pull-up;
 978                                 drive-strength = <8>;
 979                         };
 980
 981                         sdc1_data_off: data-off {
 982                                 pins = "sdc1_data";
 983                                 bias-pull-up;
 984                                 drive-strength = <2>;
 985                         };
 986
 987                         sdc1_rclk_on: rclk-on {
 988                                 pins = "sdc1_rclk";
 989                                 bias-pull-down;
 990                         };
 991
 992                         sdc1_rclk_off: rclk-off {
 993                                 pins = "sdc1_rclk";
 994                                 bias-pull-down;
 995                         };
 996
 997                         sdc2_clk_on: sdc2-clk-on {
 998                                 pins = "sdc2_clk";
 999                                 bias-disable;
1000                                 drive-strength = <10>;
1001                         };
1002
1003                         sdc2_clk_off: sdc2-clk-off {
1004                                 pins = "sdc2_clk";
1005                                 bias-disable;
1006                                 drive-strength = <2>;
1007                         };
1008
1009                         sdc2_cmd_on: sdc2-cmd-on {
1010                                 pins = "sdc2_cmd";
1011                                 bias-pull-up;
1012                                 drive-strength = <10>;
1013                         };
1014
1015                         sdc2_cmd_off: sdc2-cmd-off {
1016                                 pins = "sdc2_cmd";
1017                                 bias-pull-up;
1018                                 drive-strength = <2>;
1019                         };
1020
1021                         sdc2_data_on: sdc2-data-on {
1022                                 pins = "sdc2_data";
1023                                 bias-pull-up;
1024                                 drive-strength = <10>;
1025                         };
1026
1027                         sdc2_data_off: sdc2-data-off {
1028                                 pins = "sdc2_data";
1029                                 bias-pull-up;
1030                                 drive-strength = <2>;
1031                         };
1032                 };
1033
1034                 mmcc: clock-controller@fd8c0000 {
1035                         compatible = "qcom,mmcc-msm8994";
1036                         reg = <0xfd8c0000 0x5200>;
1037                         #clock-cells = <1>;
1038                         #reset-cells = <1>;
1039                         #power-domain-cells = <1>;
1040
1041                         clock-names = "xo",
1042                                       "gpll0",
1043                                       "mmssnoc_ahb",
1044                                       "oxili_gfx3d_clk_src",
1045                                       "dsi0pll",
1046                                       "dsi0pllbyte",
1047                                       "dsi1pll",
1048                                       "dsi1pllbyte",
1049                                       "hdmipll";
1050                         clocks = <&xo_board>,
1051                                  <&gcc GPLL0_OUT_MMSSCC>,
1052                                  <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>,
1053                                  <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
1054                                  <0>,
1055                                  <0>,
1056                                  <0>,
1057                                  <0>,
1058                                  <0>;
1059
1060                         assigned-clocks = <&mmcc MMPLL0_PLL>,
1061                                           <&mmcc MMPLL1_PLL>,
1062                                           <&mmcc MMPLL3_PLL>,
1063                                           <&mmcc MMPLL4_PLL>,
1064                                           <&mmcc MMPLL5_PLL>;
1065                         assigned-clock-rates = <800000000>,
1066                                                <1167000000>,
1067                                                <1020000000>,
1068                                                <960000000>,
1069                                                <600000000>;
1070                 };
1071
1072                 ocmem: ocmem@fdd00000 {
1073                         compatible = "qcom,msm8974-ocmem";
1074                         reg = <0xfdd00000 0x2000>,
1075                               <0xfec00000 0x200000>;
1076                         reg-names = "ctrl", "mem";
1077                         clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1078                                  <&mmcc OCMEMCX_OCMEMNOC_CLK>;
1079                         clock-names = "core", "iface";
1080
1081                         #address-cells = <1>;
1082                         #size-cells = <1>;
1083
1084                         gmu_sram: gmu-sram@0 {
1085                                 reg = <0x0 0x180000>;
1086                         };
1087                 };
1088         };
1089
1090         timer: timer {
1091                 compatible = "arm,armv8-timer";
1092                 interrupts = <GIC_PPI 2 0xff08>,
1093                              <GIC_PPI 3 0xff08>,
1094                              <GIC_PPI 4 0xff08>,
1095                              <GIC_PPI 1 0xff08>;
1096         };
1097
1098         vph_pwr: vph-pwr-regulator {
1099                 compatible = "regulator-fixed";
1100                 regulator-name = "vph_pwr";
1101
1102                 regulator-min-microvolt = <3600000>;
1103                 regulator-max-microvolt = <3600000>;
1104
1105                 regulator-always-on;
1106         };
1107 };
1108