arch/arm64/boot/dts/freescale/imx8qxp-mek.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2017~2018 NXP
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "imx8qxp.dtsi"
   9
  10 / {
  11         model = "Freescale i.MX8QXP MEK";
  12         compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
  13
  14         chosen {
  15                 stdout-path = &lpuart0;
  16         };
  17
  18         memory@80000000 {
  19                 device_type = "memory";
  20                 reg = <0x00000000 0x80000000 0 0x40000000>;
  21         };
  22
  23         reg_usdhc2_vmmc: usdhc2-vmmc {
  24                 compatible = "regulator-fixed";
  25                 regulator-name = "SD1_SPWR";
  26                 regulator-min-microvolt = <3000000>;
  27                 regulator-max-microvolt = <3000000>;
  28                 gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
  29                 enable-active-high;
  30         };
  31 };
  32
  33 &dsp {
  34         status = "okay";
  35 };
  36
  37 &fec1 {
  38         pinctrl-names = "default";
  39         pinctrl-0 = <&pinctrl_fec1>;
  40         phy-mode = "rgmii-id";
  41         phy-handle = <&ethphy0>;
  42         fsl,magic-packet;
  43         status = "okay";
  44
  45         mdio {
  46                 #address-cells = <1>;
  47                 #size-cells = <0>;
  48
  49                 ethphy0: ethernet-phy@0 {
  50                         compatible = "ethernet-phy-ieee802.3-c22";
  51                         reg = <0>;
  52                 };
  53         };
  54 };
  55
  56 &i2c1 {
  57         #address-cells = <1>;
  58         #size-cells = <0>;
  59         clock-frequency = <100000>;
  60         pinctrl-names = "default";
  61         pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
  62         status = "okay";
  63
  64         i2c-switch@71 {
  65                 compatible = "nxp,pca9646", "nxp,pca9546";
  66                 #address-cells = <1>;
  67                 #size-cells = <0>;
  68                 reg = <0x71>;
  69                 reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>;
  70
  71                 i2c@0 {
  72                         #address-cells = <1>;
  73                         #size-cells = <0>;
  74                         reg = <0>;
  75
  76                         max7322: gpio@68 {
  77                                 compatible = "maxim,max7322";
  78                                 reg = <0x68>;
  79                                 gpio-controller;
  80                                 #gpio-cells = <2>;
  81                         };
  82                 };
  83
  84                 i2c@1 {
  85                         #address-cells = <1>;
  86                         #size-cells = <0>;
  87                         reg = <1>;
  88                 };
  89
  90                 i2c@2 {
  91                         #address-cells = <1>;
  92                         #size-cells = <0>;
  93                         reg = <2>;
  94
  95                         pressure-sensor@60 {
  96                                 compatible = "fsl,mpl3115";
  97                                 reg = <0x60>;
  98                         };
  99                 };
 100
 101                 i2c@3 {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104                         reg = <3>;
 105
 106                         pca9557_a: gpio@1a {
 107                                 compatible = "nxp,pca9557";
 108                                 reg = <0x1a>;
 109                                 gpio-controller;
 110                                 #gpio-cells = <2>;
 111                         };
 112
 113                         pca9557_b: gpio@1d {
 114                                 compatible = "nxp,pca9557";
 115                                 reg = <0x1d>;
 116                                 gpio-controller;
 117                                 #gpio-cells = <2>;
 118                         };
 119
 120                         light-sensor@44 {
 121                                 pinctrl-names = "default";
 122                                 pinctrl-0 = <&pinctrl_isl29023>;
 123                                 compatible = "isil,isl29023";
 124                                 reg = <0x44>;
 125                                 interrupt-parent = <&lsio_gpio1>;
 126                                 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &lpuart0 {
 133         pinctrl-names = "default";
 134         pinctrl-0 = <&pinctrl_lpuart0>;
 135         status = "okay";
 136 };
 137
 138 &mu_m0 {
 139         status = "okay";
 140 };
 141
 142 &mu1_m0 {
 143         status = "okay";
 144 };
 145
 146 &scu_key {
 147         status = "okay";
 148 };
 149
 150 &thermal_zones {
 151         pmic-thermal0 {
 152                 polling-delay-passive = <250>;
 153                 polling-delay = <2000>;
 154                 thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
 155
 156                 trips {
 157                         pmic_alert0: trip0 {
 158                                 temperature = <110000>;
 159                                 hysteresis = <2000>;
 160                                 type = "passive";
 161                         };
 162
 163                         pmic_crit0: trip1 {
 164                                 temperature = <125000>;
 165                                 hysteresis = <2000>;
 166                                 type = "critical";
 167                         };
 168                 };
 169
 170                 cooling-maps {
 171                         map0 {
 172                                 trip = <&pmic_alert0>;
 173                                 cooling-device =
 174                                         <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 175                                         <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 176                                         <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 177                                         <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 178                         };
 179                 };
 180         };
 181 };
 182
 183 &usdhc1 {
 184         assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
 185         assigned-clock-rates = <200000000>;
 186         pinctrl-names = "default";
 187         pinctrl-0 = <&pinctrl_usdhc1>;
 188         bus-width = <8>;
 189         no-sd;
 190         no-sdio;
 191         non-removable;
 192         status = "okay";
 193 };
 194
 195 &usdhc2 {
 196         assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
 197         assigned-clock-rates = <200000000>;
 198         pinctrl-names = "default";
 199         pinctrl-0 = <&pinctrl_usdhc2>;
 200         bus-width = <4>;
 201         vmmc-supply = <&reg_usdhc2_vmmc>;
 202         cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
 203         wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
 204         status = "okay";
 205 };
 206
 207 &vpu {
 208         compatible = "nxp,imx8qxp-vpu";
 209         status = "okay";
 210 };
 211
 212 &vpu_core0 {
 213         reg = <0x2d040000 0x10000>;
 214         memory-region = <&decoder_boot>, <&decoder_rpc>;
 215         status = "okay";
 216 };
 217
 218 &vpu_core1 {
 219         reg = <0x2d050000 0x10000>;
 220         memory-region = <&encoder_boot>, <&encoder_rpc>;
 221         status = "okay";
 222 };
 223
 224 &iomuxc {
 225         pinctrl_fec1: fec1grp {
 226                 fsl,pins = <
 227                         IMX8QXP_ENET0_MDC_CONN_ENET0_MDC                        0x06000020
 228                         IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO                      0x06000020
 229                         IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL      0x06000020
 230                         IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC            0x06000020
 231                         IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0          0x06000020
 232                         IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1          0x06000020
 233                         IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2          0x06000020
 234                         IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3          0x06000020
 235                         IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC            0x06000020
 236                         IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL      0x06000020
 237                         IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0          0x06000020
 238                         IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1          0x06000020
 239                         IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2          0x06000020
 240                         IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3          0x06000020
 241                 >;
 242         };
 243
 244         pinctrl_ioexp_rst: ioexprstgrp {
 245                 fsl,pins = <
 246                         IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01                        0x06000021
 247                 >;
 248         };
 249
 250         pinctrl_isl29023: isl29023grp {
 251                 fsl,pins = <
 252                         IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02                        0x00000021
 253                 >;
 254         };
 255
 256         pinctrl_lpi2c1: lpi2c1grp {
 257                 fsl,pins = <
 258                         IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL                       0x06000021
 259                         IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA                       0x06000021
 260                 >;
 261         };
 262
 263         pinctrl_lpuart0: lpuart0grp {
 264                 fsl,pins = <
 265                         IMX8QXP_UART0_RX_ADMA_UART0_RX                          0x06000020
 266                         IMX8QXP_UART0_TX_ADMA_UART0_TX                          0x06000020
 267                 >;
 268         };
 269
 270         pinctrl_usdhc1: usdhc1grp {
 271                 fsl,pins = <
 272                         IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK                        0x06000041
 273                         IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD                        0x00000021
 274                         IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0                    0x00000021
 275                         IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1                    0x00000021
 276                         IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2                    0x00000021
 277                         IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3                    0x00000021
 278                         IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4                    0x00000021
 279                         IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5                    0x00000021
 280                         IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6                    0x00000021
 281                         IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7                    0x00000021
 282                         IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE                  0x00000041
 283                 >;
 284         };
 285
 286         pinctrl_usdhc2: usdhc2grp {
 287                 fsl,pins = <
 288                         IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK                      0x06000041
 289                         IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD                      0x00000021
 290                         IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0                  0x00000021
 291                         IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1                  0x00000021
 292                         IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2                  0x00000021
 293                         IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3                  0x00000021
 294                         IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT              0x00000021
 295                 >;
 296         };
 297 };