arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2018-2019 Purism SPC
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "dt-bindings/input/input.h"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include "dt-bindings/pwm/pwm.h"
  11 #include "dt-bindings/usb/pd.h"
  12 #include "imx8mq.dtsi"
  13
  14 / {
  15         model = "Purism Librem 5 devkit";
  16         compatible = "purism,librem5-devkit", "fsl,imx8mq";
  17
  18         backlight_dsi: backlight-dsi {
  19                 compatible = "pwm-backlight";
  20                 /* 200 Hz for the PAM2841 */
  21                 pwms = <&pwm1 0 5000000 0>;
  22                 brightness-levels = <0 100>;
  23                 num-interpolated-steps = <100>;
  24                 /* Default brightness level (index into the array defined by */
  25                 /* the "brightness-levels" property) */
  26                 default-brightness-level = <0>;
  27                 power-supply = <&reg_22v4_p>;
  28         };
  29
  30         chosen {
  31                 stdout-path = &uart1;
  32         };
  33
  34         gpio-keys {
  35                 compatible = "gpio-keys";
  36                 pinctrl-names = "default";
  37                 pinctrl-0 = <&pinctrl_gpio_keys>;
  38
  39                 button-1 {
  40                         label = "VOL_UP";
  41                         gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
  42                         wakeup-source;
  43                         linux,code = <KEY_VOLUMEUP>;
  44                 };
  45
  46                 button-2 {
  47                         label = "VOL_DOWN";
  48                         gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
  49                         wakeup-source;
  50                         linux,code = <KEY_VOLUMEDOWN>;
  51                 };
  52
  53                 button-3 {
  54                         label = "WWAN_WAKE";
  55                         gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
  56                         interrupt-parent = <&gpio3>;
  57                         interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
  58                         wakeup-source;
  59                         linux,code = <KEY_PHONE>;
  60                 };
  61         };
  62
  63         leds {
  64                 compatible = "gpio-leds";
  65                 pinctrl-names = "default";
  66                 pinctrl-0 = <&pinctrl_gpio_leds>;
  67
  68                 led1 {
  69                         label = "LED 1";
  70                         gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
  71                         default-state = "off";
  72                 };
  73         };
  74
  75         pmic_osc: clock-pmic {
  76                 compatible = "fixed-clock";
  77                 #clock-cells = <0>;
  78                 clock-frequency = <32768>;
  79                 clock-output-names = "pmic_osc";
  80         };
  81
  82         reg_1v8_p: regulator-1v8-p {
  83                 compatible = "regulator-fixed";
  84                 regulator-name = "1v8_p";
  85                 regulator-min-microvolt = <1800000>;
  86                 regulator-max-microvolt = <1800000>;
  87                 vin-supply = <&reg_pwr_en>;
  88         };
  89
  90         reg_2v8_p: regulator-2v8-p {
  91                 compatible = "regulator-fixed";
  92                 regulator-name = "2v8_p";
  93                 regulator-min-microvolt = <2800000>;
  94                 regulator-max-microvolt = <2800000>;
  95                 vin-supply = <&reg_pwr_en>;
  96         };
  97
  98         reg_3v3_p: regulator-3v3-p {
  99                 compatible = "regulator-fixed";
 100                 regulator-name = "3v3_p";
 101                 regulator-min-microvolt = <3300000>;
 102                 regulator-max-microvolt = <3300000>;
 103                 vin-supply = <&reg_pwr_en>;
 104
 105                 regulator-state-mem {
 106                         regulator-on-in-suspend;
 107                 };
 108         };
 109
 110         reg_5v_p: regulator-5v-p {
 111                 compatible = "regulator-fixed";
 112                 regulator-name = "5v_p";
 113                 regulator-min-microvolt = <5000000>;
 114                 regulator-max-microvolt = <5000000>;
 115                 vin-supply = <&reg_pwr_en>;
 116
 117                 regulator-state-mem {
 118                         regulator-on-in-suspend;
 119                 };
 120         };
 121
 122         reg_22v4_p: regulator-22v4-p  {
 123                 compatible = "regulator-fixed";
 124                 regulator-name = "22v4_P";
 125                 regulator-min-microvolt = <22400000>;
 126                 regulator-max-microvolt = <22400000>;
 127                 vin-supply = <&reg_pwr_en>;
 128         };
 129
 130         reg_pwr_en: regulator-pwr-en {
 131                 compatible = "regulator-fixed";
 132                 pinctrl-names = "default";
 133                 pinctrl-0 = <&pinctrl_pwr_en>;
 134                 regulator-name = "PWR_EN";
 135                 regulator-min-microvolt = <3300000>;
 136                 regulator-max-microvolt = <3300000>;
 137                 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 138                 enable-active-high;
 139                 regulator-always-on;
 140         };
 141
 142         reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 143                 compatible = "regulator-fixed";
 144                 pinctrl-names = "default";
 145                 pinctrl-0 = <&pinctrl_usdhc2_pwr>;
 146                 regulator-name = "VSD_3V3";
 147                 regulator-min-microvolt = <3300000>;
 148                 regulator-max-microvolt = <3300000>;
 149                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 150                 enable-active-high;
 151                 regulator-always-on;
 152         };
 153
 154         wwan_codec: sound-wwan-codec {
 155                 compatible = "option,gtm601";
 156                 #sound-dai-cells = <0>;
 157         };
 158
 159         mic_mux: mic-mux {
 160                 compatible = "simple-audio-mux";
 161                 pinctrl-names = "default";
 162                 pinctrl-0 = <&pinctrl_micsel>;
 163                 mux-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
 164                 sound-name-prefix = "Mic Mux";
 165         };
 166
 167         sound {
 168                 compatible = "simple-audio-card";
 169                 pinctrl-names = "default";
 170                 pinctrl-0 = <&pinctrl_hpdet>;
 171                 simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>;
 172                 simple-audio-card,name = "Librem 5 Devkit";
 173                 simple-audio-card,format = "i2s";
 174                 simple-audio-card,widgets =
 175                         "Microphone", "Builtin Microphone",
 176                         "Microphone", "Headset Microphone",
 177                         "Headphone", "Headphones",
 178                         "Speaker", "Builtin Speaker";
 179                 simple-audio-card,routing =
 180                         "MIC_IN", "Mic Mux OUT",
 181                         "Mic Mux IN1", "Headset Microphone",
 182                         "Mic Mux IN2", "Builtin Microphone",
 183                         "Mic Mux OUT", "Mic Bias",
 184                         "Headphones", "HP_OUT",
 185                         "Builtin Speaker", "Speaker Amp OUTR",
 186                         "Speaker Amp INR", "LINE_OUT";
 187                 simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 188
 189                 simple-audio-card,cpu {
 190                         sound-dai = <&sai2>;
 191                 };
 192
 193                 simple-audio-card,codec {
 194                         sound-dai = <&sgtl5000>;
 195                         clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 196                         frame-master;
 197                         bitclock-master;
 198                 };
 199         };
 200
 201         sound-wwan {
 202                 compatible = "simple-audio-card";
 203                 simple-audio-card,name = "SIMCom SIM7100";
 204                 simple-audio-card,format = "dsp_a";
 205
 206                 simple-audio-card,cpu {
 207                         sound-dai = <&sai6>;
 208                 };
 209
 210                 telephony_link_master: simple-audio-card,codec {
 211                         sound-dai = <&wwan_codec>;
 212                         frame-master;
 213                         bitclock-master;
 214                 };
 215         };
 216
 217         speaker_amp: speaker-amp {
 218                 compatible = "simple-audio-amplifier";
 219                 pinctrl-names = "default";
 220                 pinctrl-0 = <&pinctrl_spkamp>;
 221                 VCC-supply = <&reg_3v3_p>;
 222                 sound-name-prefix = "Speaker Amp";
 223                 enable-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
 224         };
 225
 226         vibrator {
 227                 compatible = "gpio-vibrator";
 228                 pinctrl-names = "default";
 229                 pinctrl-0 = <&pinctrl_haptic>;
 230                 enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
 231                 vcc-supply = <&reg_3v3_p>;
 232         };
 233
 234         wifi_pwr_en: regulator-wifi-en {
 235                 compatible = "regulator-fixed";
 236                 pinctrl-names = "default";
 237                 pinctrl-0 = <&pinctrl_wifi_pwr_en>;
 238                 regulator-name = "WIFI_EN";
 239                 regulator-min-microvolt = <3300000>;
 240                 regulator-max-microvolt = <3300000>;
 241                 gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 242                 enable-active-high;
 243                 regulator-always-on;
 244         };
 245 };
 246
 247 &A53_0 {
 248         cpu-supply = <&buck2_reg>;
 249 };
 250
 251 &A53_1 {
 252         cpu-supply = <&buck2_reg>;
 253 };
 254
 255 &A53_2 {
 256         cpu-supply = <&buck2_reg>;
 257 };
 258
 259 &A53_3 {
 260         cpu-supply = <&buck2_reg>;
 261 };
 262
 263 &dphy {
 264         status = "okay";
 265 };
 266
 267 &fec1 {
 268         pinctrl-names = "default";
 269         pinctrl-0 = <&pinctrl_fec1>;
 270         phy-mode = "rgmii-id";
 271         phy-handle = <&ethphy0>;
 272         fsl,magic-packet;
 273         phy-supply = <&reg_3v3_p>;
 274         status = "okay";
 275
 276         mdio {
 277                 #address-cells = <1>;
 278                 #size-cells = <0>;
 279
 280                 ethphy0: ethernet-phy@1 {
 281                         compatible = "ethernet-phy-ieee802.3-c22";
 282                         reg = <1>;
 283                 };
 284         };
 285 };
 286
 287 &i2c1 {
 288         clock-frequency = <100000>;
 289         pinctrl-names = "default";
 290         pinctrl-0 = <&pinctrl_i2c1>;
 291         status = "okay";
 292
 293         pmic: pmic@4b {
 294                 compatible = "rohm,bd71837";
 295                 reg = <0x4b>;
 296                 pinctrl-names = "default";
 297                 pinctrl-0 = <&pinctrl_pmic>;
 298                 clocks = <&pmic_osc>;
 299                 clock-names = "osc";
 300                 #clock-cells = <0>;
 301                 clock-output-names = "pmic_clk";
 302                 interrupt-parent = <&gpio1>;
 303                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 304                 rohm,reset-snvs-powered;
 305
 306                 regulators {
 307                         buck1_reg: BUCK1 {
 308                                 regulator-name = "buck1";
 309                                 regulator-min-microvolt = <700000>;
 310                                 regulator-max-microvolt = <1300000>;
 311                                 regulator-boot-on;
 312                                 regulator-always-on;
 313                                 regulator-ramp-delay = <1250>;
 314                                 rohm,dvs-run-voltage = <900000>;
 315                                 rohm,dvs-idle-voltage = <850000>;
 316                                 rohm,dvs-suspend-voltage = <800000>;
 317                         };
 318
 319                         buck2_reg: BUCK2 {
 320                                 regulator-name = "buck2";
 321                                 regulator-min-microvolt = <700000>;
 322                                 regulator-max-microvolt = <1300000>;
 323                                 regulator-boot-on;
 324                                 regulator-ramp-delay = <1250>;
 325                                 rohm,dvs-run-voltage = <1000000>;
 326                                 rohm,dvs-idle-voltage = <900000>;
 327                         };
 328
 329                         buck3_reg: BUCK3 {
 330                                 regulator-name = "buck3";
 331                                 regulator-min-microvolt = <700000>;
 332                                 regulator-max-microvolt = <1300000>;
 333                                 regulator-boot-on;
 334                                 rohm,dvs-run-voltage = <900000>;
 335                         };
 336
 337                         buck4_reg: BUCK4 {
 338                                 regulator-name = "buck4";
 339                                 regulator-min-microvolt = <700000>;
 340                                 regulator-max-microvolt = <1300000>;
 341                                 rohm,dvs-run-voltage = <1000000>;
 342                         };
 343
 344                         buck5_reg: BUCK5 {
 345                                 regulator-name = "buck5";
 346                                 regulator-min-microvolt = <700000>;
 347                                 regulator-max-microvolt = <1350000>;
 348                                 regulator-boot-on;
 349                                 regulator-always-on;
 350                         };
 351
 352                         buck6_reg: BUCK6 {
 353                                 regulator-name = "buck6";
 354                                 regulator-min-microvolt = <3000000>;
 355                                 regulator-max-microvolt = <3300000>;
 356                                 regulator-boot-on;
 357                                 regulator-always-on;
 358                         };
 359
 360                         buck7_reg: BUCK7 {
 361                                 regulator-name = "buck7";
 362                                 regulator-min-microvolt = <1605000>;
 363                                 regulator-max-microvolt = <1995000>;
 364                                 regulator-boot-on;
 365                                 regulator-always-on;
 366                         };
 367
 368                         buck8_reg: BUCK8 {
 369                                 regulator-name = "buck8";
 370                                 regulator-min-microvolt = <800000>;
 371                                 regulator-max-microvolt = <1400000>;
 372                                 regulator-boot-on;
 373                                 regulator-always-on;
 374                         };
 375
 376                         ldo1_reg: LDO1 {
 377                                 regulator-name = "ldo1";
 378                                 regulator-min-microvolt = <3000000>;
 379                                 regulator-max-microvolt = <3300000>;
 380                                 regulator-boot-on;
 381                                 /* leave on for snvs power button */
 382                                 regulator-always-on;
 383                         };
 384
 385                         ldo2_reg: LDO2 {
 386                                 regulator-name = "ldo2";
 387                                 regulator-min-microvolt = <900000>;
 388                                 regulator-max-microvolt = <900000>;
 389                                 regulator-boot-on;
 390                                 /* leave on for snvs power button */
 391                                 regulator-always-on;
 392                         };
 393
 394                         ldo3_reg: LDO3 {
 395                                 regulator-name = "ldo3";
 396                                 regulator-min-microvolt = <1800000>;
 397                                 regulator-max-microvolt = <3300000>;
 398                                 regulator-boot-on;
 399                                 regulator-always-on;
 400                         };
 401
 402                         ldo4_reg: LDO4 {
 403                                 regulator-name = "ldo4";
 404                                 regulator-min-microvolt = <900000>;
 405                                 regulator-max-microvolt = <1800000>;
 406                                 regulator-boot-on;
 407                                 regulator-always-on;
 408                         };
 409
 410                         ldo5_reg: LDO5 {
 411                                 regulator-name = "ldo5";
 412                                 regulator-min-microvolt = <1800000>;
 413                                 regulator-max-microvolt = <3300000>;
 414                                 regulator-always-on;
 415                         };
 416
 417                         ldo6_reg: LDO6 {
 418                                 regulator-name = "ldo6";
 419                                 regulator-min-microvolt = <900000>;
 420                                 regulator-max-microvolt = <1800000>;
 421                                 regulator-boot-on;
 422                                 regulator-always-on;
 423                         };
 424
 425                         ldo7_reg: LDO7 {
 426                                 regulator-name = "ldo7";
 427                                 regulator-min-microvolt = <1800000>;
 428                                 regulator-max-microvolt = <3300000>;
 429                                 regulator-boot-on;
 430                                 regulator-always-on;
 431                         };
 432                 };
 433         };
 434
 435         typec_ptn5100: usb-typec@52 {
 436                 compatible = "nxp,ptn5110";
 437                 reg = <0x52>;
 438                 pinctrl-names = "default";
 439                 pinctrl-0 = <&pinctrl_typec>;
 440                 interrupt-parent = <&gpio3>;
 441                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 442
 443                 connector {
 444                         compatible = "usb-c-connector";
 445                         label = "USB-C";
 446                         data-role = "dual";
 447                         power-role = "dual";
 448                         try-power-role = "sink";
 449                         source-pdos = <PDO_FIXED(5000, 2000,
 450                                 PDO_FIXED_USB_COMM |
 451                                 PDO_FIXED_DUAL_ROLE |
 452                                 PDO_FIXED_DATA_SWAP )>;
 453                         sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
 454                                 PDO_FIXED_DUAL_ROLE |
 455                                 PDO_FIXED_DATA_SWAP )
 456                              PDO_VAR(5000, 5000, 3500)>;
 457                         op-sink-microwatt = <10000000>;
 458
 459                         ports {
 460                                 #address-cells = <1>;
 461                                 #size-cells = <0>;
 462
 463                                 port@0 {
 464                                         reg = <0>;
 465
 466                                         usb_con_hs: endpoint {
 467                                                 remote-endpoint = <&typec_hs>;
 468                                         };
 469                                 };
 470
 471                                 port@1 {
 472                                         reg = <1>;
 473
 474                                         usb_con_ss: endpoint {
 475                                                 remote-endpoint = <&typec_ss>;
 476                                         };
 477                                 };
 478                         };
 479                 };
 480         };
 481
 482         rtc@68 {
 483                 compatible = "microcrystal,rv4162";
 484                 reg = <0x68>;
 485                 pinctrl-names = "default";
 486                 pinctrl-0 = <&pinctrl_rtc>;
 487                 interrupt-parent = <&gpio4>;
 488                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 489         };
 490
 491         charger@6b { /* bq25896 */
 492                 compatible = "ti,bq25890";
 493                 reg = <0x6b>;
 494                 pinctrl-names = "default";
 495                 pinctrl-0 = <&pinctrl_charger>;
 496                 interrupt-parent = <&gpio3>;
 497                 interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
 498                 ti,battery-regulation-voltage = <4192000>; /* 4.192V */
 499                 ti,charge-current = <1600000>; /* 1.6A */
 500                 ti,termination-current = <66000>;  /* 66mA */
 501                 ti,precharge-current = <130000>; /* 130mA */
 502                 ti,minimum-sys-voltage = <3000000>; /* 3V */
 503                 ti,boost-voltage = <5000000>; /* 5V */
 504                 ti,boost-max-current = <50000>; /* 50mA */
 505         };
 506 };
 507
 508 &i2c3 {
 509         clock-frequency = <100000>;
 510         pinctrl-names = "default";
 511         pinctrl-0 = <&pinctrl_i2c3>;
 512         status = "okay";
 513
 514         magnetometer@1e {
 515                 compatible = "st,lsm9ds1-magn";
 516                 reg = <0x1e>;
 517                 pinctrl-names = "default";
 518                 pinctrl-0 = <&pinctrl_imu>;
 519                 interrupt-parent = <&gpio3>;
 520                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 521                 vdd-supply = <&reg_3v3_p>;
 522                 vddio-supply = <&reg_3v3_p>;
 523         };
 524
 525         sgtl5000: audio-codec@a {
 526                 compatible = "fsl,sgtl5000";
 527                 clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 528                 assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
 529                 assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 530                 assigned-clock-rates = <24576000>;
 531                 #sound-dai-cells = <0>;
 532                 reg = <0x0a>;
 533                 VDDD-supply = <&reg_1v8_p>;
 534                 VDDIO-supply = <&reg_3v3_p>;
 535                 VDDA-supply = <&reg_3v3_p>;
 536         };
 537
 538         touchscreen@5d {
 539                 compatible = "goodix,gt5688";
 540                 reg = <0x5d>;
 541                 pinctrl-names = "default";
 542                 pinctrl-0 = <&pinctrl_ts>;
 543                 interrupt-parent = <&gpio3>;
 544                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 545                 reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 546                 irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 547                 touchscreen-size-x = <720>;
 548                 touchscreen-size-y = <1440>;
 549                 AVDD28-supply = <&reg_2v8_p>;
 550                 VDDIO-supply = <&reg_1v8_p>;
 551         };
 552
 553         proximity-sensor@60 {
 554                 compatible = "vishay,vcnl4040";
 555                 reg = <0x60>;
 556                 pinctrl-0 = <&pinctrl_prox>;
 557         };
 558
 559         accel-gyro@6a {
 560                 compatible = "st,lsm9ds1-imu";
 561                 reg = <0x6a>;
 562                 vdd-supply = <&reg_3v3_p>;
 563                 vddio-supply = <&reg_3v3_p>;
 564                 mount-matrix =  "1",  "0",  "0",
 565                                 "0",  "1",  "0",
 566                                 "0",  "0", "-1";
 567         };
 568 };
 569
 570 &iomuxc {
 571         pinctrl_bl: blgrp {
 572                 fsl,pins = <
 573                         MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT        0x6 /* DSI_BL_PWM */
 574                 >;
 575         };
 576
 577         pinctrl_bt: btgrp {
 578                 fsl,pins = <
 579                         MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11     0x16 /* nBT_DISABLE */
 580                         MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7      0x10 /* BT_HOST_WAKE */
 581                 >;
 582         };
 583
 584         pinctrl_charger: chargergrp {
 585                 fsl,pins = <
 586                         MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25       0x80 /* CHRG_nINT */
 587                 >;
 588         };
 589
 590         pinctrl_fec1: fec1grp {
 591                 fsl,pins = <
 592                         MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
 593                         MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
 594                         MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
 595                         MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
 596                         MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
 597                         MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
 598                         MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
 599                         MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
 600                         MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
 601                         MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
 602                         MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
 603                         MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
 604                         MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
 605                         MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
 606                         MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9               0x19
 607                         MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
 608                 >;
 609         };
 610
 611         pinctrl_ts: tsgrp {
 612                 fsl,pins = <
 613                         MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0         0x16  /* TOUCH INT */
 614                         MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x19  /* TOUCH RST */
 615                 >;
 616         };
 617
 618         pinctrl_gpio_leds: gpioledgrp {
 619                 fsl,pins = <
 620                         MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13      0x16
 621                 >;
 622         };
 623
 624         pinctrl_gpio_keys: gpiokeygrp {
 625                 fsl,pins = <
 626                         MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x16
 627                         MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22        0x16
 628                         MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8      0x80   /* nWoWWAN */
 629                 >;
 630         };
 631
 632         pinctrl_haptic: hapticgrp {
 633                 fsl,pins = <
 634                         MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4         0xc6   /* nHAPTIC */
 635                 >;
 636         };
 637
 638         pinctrl_hpdet: hpdetgrp {
 639                 fsl,pins = <
 640                         MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20        0xC0   /* HP_DET */
 641                 >;
 642         };
 643
 644         pinctrl_i2c1: i2c1grp {
 645                 fsl,pins = <
 646                         MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL          0x4000001f
 647                         MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA          0x4000001f
 648                 >;
 649         };
 650
 651         pinctrl_i2c3: i2c3grp {
 652                 fsl,pins = <
 653                         MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL          0x4000001f
 654                         MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA          0x4000001f
 655                 >;
 656         };
 657
 658         pinctrl_imu: imugrp {
 659                 fsl,pins = <
 660                         MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19       0x8  /* IMU_INT */
 661                 >;
 662         };
 663
 664         pinctrl_micsel: micselgrp {
 665                 fsl,pins = <
 666                         MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5    0xc6  /* MIC_SEL */
 667                 >;
 668         };
 669
 670         pinctrl_spkamp: spkamp {
 671                 fsl,pins = <
 672                         MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3         0x81  /* MUTE */
 673                 >;
 674         };
 675
 676         pinctrl_pmic: pmicgrp {
 677                 fsl,pins = <
 678                         MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x80  /* PMIC intr */
 679                 >;
 680         };
 681
 682         pinctrl_prox: proxgrp {
 683                 fsl,pins = <
 684                         MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12      0x80  /* prox intr */
 685                 >;
 686         };
 687
 688         pinctrl_pwr_en: pwrengrp {
 689                 fsl,pins = <
 690                         MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0x06
 691                 >;
 692         };
 693
 694         pinctrl_rtc: rtcgrp {
 695                 fsl,pins = <
 696                         MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29        0x80  /* RTC intr */
 697                 >;
 698         };
 699
 700         pinctrl_sai2: sai2grp {
 701                 fsl,pins = <
 702                         MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
 703                         MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
 704                         MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
 705                         MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
 706                         MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
 707                 >;
 708         };
 709
 710         pinctrl_sai6: sai6grp {
 711                 fsl,pins = <
 712                         MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0    0xd6
 713                         MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC     0xd6
 714                         MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
 715                         MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0    0xd6
 716                 >;
 717         };
 718
 719         pinctrl_typec: typecgrp {
 720                 fsl,pins = <
 721                         MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12             0x16
 722                         MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1               0x80
 723                 >;
 724         };
 725
 726         pinctrl_uart1: uart1grp {
 727                 fsl,pins = <
 728                         MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX             0x49
 729                         MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX             0x49
 730                 >;
 731         };
 732
 733         pinctrl_uart2: uart2grp {
 734                 fsl,pins = <
 735                         MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX             0x49
 736                         MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX             0x49
 737                         MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B          0x49
 738                         MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B          0x49
 739                 >;
 740         };
 741
 742         pinctrl_uart3: uart3grp {
 743                 fsl,pins = <
 744                         MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX             0x49
 745                         MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX             0x49
 746                 >;
 747         };
 748
 749         pinctrl_uart4: uart4grp {
 750                 fsl,pins = <
 751                         MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX           0x49
 752                         MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX           0x49
 753                         MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B        0x49
 754                         MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B         0x49
 755                         MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K      0x49
 756                 >;
 757         };
 758
 759         pinctrl_usdhc1: usdhc1grp {
 760                 fsl,pins = <
 761                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x83
 762                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xc3
 763                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xc3
 764                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xc3
 765                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xc3
 766                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xc3
 767                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xc3
 768                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xc3
 769                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xc3
 770                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xc3
 771                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x83
 772                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 773                 >;
 774         };
 775
 776         pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 777                 fsl,pins = <
 778                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x8d
 779                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xcd
 780                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xcd
 781                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xcd
 782                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xcd
 783                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xcd
 784                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xcd
 785                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xcd
 786                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xcd
 787                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xcd
 788                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x8d
 789                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 790                 >;
 791         };
 792
 793         pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 794                 fsl,pins = <
 795                         MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x9f
 796                         MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xdf
 797                         MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xdf
 798                         MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xdf
 799                         MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xdf
 800                         MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xdf
 801                         MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xdf
 802                         MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xdf
 803                         MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xdf
 804                         MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xdf
 805                         MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x9f
 806                         MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
 807                 >;
 808         };
 809
 810         pinctrl_usdhc2_pwr: usdhc2pwrgrp {
 811                 fsl,pins = <
 812                         MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
 813                 >;
 814         };
 815
 816         pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 817                 fsl,pins = <
 818                         MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20          0x80 /* WIFI_WAKE */
 819                 >;
 820         };
 821
 822         pinctrl_usdhc2: usdhc2grp {
 823                 fsl,pins = <
 824                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x83
 825                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xc3
 826                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xc3
 827                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xc3
 828                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xc3
 829                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xc3
 830                 >;
 831         };
 832
 833         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 834                 fsl,pins = <
 835                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x8d
 836                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcd
 837                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcd
 838                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcd
 839                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcd
 840                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcd
 841                 >;
 842         };
 843
 844         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 845                 fsl,pins = <
 846                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK         0x9f
 847                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD         0xcf
 848                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0     0xcf
 849                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1     0xcf
 850                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2     0xcf
 851                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3     0xcf
 852                 >;
 853         };
 854
 855         pinctrl_wdog: wdoggrp {
 856                 fsl,pins = <
 857                         MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0xc6
 858                 >;
 859         };
 860
 861         pinctrl_wifi_pwr_en: wifipwrengrp {
 862                 fsl,pins = <
 863                         MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5         0x06
 864                 >;
 865         };
 866
 867         pinctrl_wwan: wwangrp {
 868                 fsl,pins = <
 869                         MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4       0x09 /* nWWAN_DISABLE */
 870                         MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8      0x80 /* nWoWWAN */
 871                         MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9      0x19 /* WWAN_RESET */
 872                 >;
 873         };
 874 };
 875
 876 &lcdif {
 877         status = "okay";
 878 };
 879
 880 &mipi_dsi {
 881         status = "okay";
 882         #address-cells = <1>;
 883         #size-cells = <0>;
 884
 885         panel@0 {
 886                 compatible = "rocktech,jh057n00900";
 887                 reg = <0>;
 888                 backlight = <&backlight_dsi>;
 889                 reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
 890                 iovcc-supply = <&reg_1v8_p>;
 891                 vcc-supply = <&reg_2v8_p>;
 892                 port {
 893                         panel_in: endpoint {
 894                                 remote-endpoint = <&mipi_dsi_out>;
 895                         };
 896                 };
 897         };
 898
 899         ports {
 900                 port@1 {
 901                         reg = <1>;
 902                         mipi_dsi_out: endpoint {
 903                                 remote-endpoint = <&panel_in>;
 904                         };
 905                 };
 906         };
 907 };
 908
 909 &pgc_gpu {
 910         power-supply = <&buck3_reg>;
 911 };
 912
 913 &pgc_vpu {
 914         power-supply = <&buck4_reg>;
 915 };
 916
 917 &pwm1 {
 918         pinctrl-names = "default";
 919         pinctrl-0 = <&pinctrl_bl>;
 920         status = "okay";
 921 };
 922
 923 &snvs_pwrkey {
 924         status = "okay";
 925 };
 926
 927 &snvs_rtc {
 928         status = "disabled";
 929 };
 930
 931 &sai2 {
 932         pinctrl-names = "default";
 933         pinctrl-0 = <&pinctrl_sai2>;
 934         assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
 935         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 936         assigned-clock-rates = <24576000>;
 937         status = "okay";
 938 };
 939
 940 &sai6 {
 941         pinctrl-names = "default";
 942         pinctrl-0 = <&pinctrl_sai6>;
 943         assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
 944         assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 945         assigned-clock-rates = <24576000>;
 946         fsl,sai-synchronous-rx;
 947         status = "okay";
 948 };
 949
 950 &uart1 { /* console */
 951         pinctrl-names = "default";
 952         pinctrl-0 = <&pinctrl_uart1>;
 953         status = "okay";
 954 };
 955
 956 &uart3 { /* GNSS */
 957         pinctrl-names = "default";
 958         pinctrl-0 = <&pinctrl_uart3>;
 959         status = "okay";
 960 };
 961
 962 &uart4 { /* BT */
 963         pinctrl-names = "default";
 964         pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
 965         uart-has-rtscts;
 966         status = "okay";
 967 };
 968
 969 &usb3_phy0 {
 970         vbus-supply = <&reg_5v_p>;
 971         status = "okay";
 972 };
 973
 974 &usb3_phy1 {
 975         vbus-supply = <&reg_5v_p>;
 976         status = "okay";
 977 };
 978
 979 &usb_dwc3_0 {
 980         #address-cells = <1>;
 981         #size-cells = <0>;
 982         dr_mode = "otg";
 983         status = "okay";
 984
 985         port@0 {
 986                 reg = <0>;
 987
 988                 typec_hs: endpoint {
 989                         remote-endpoint = <&usb_con_hs>;
 990                 };
 991         };
 992
 993         port@1 {
 994                 reg = <1>;
 995
 996                 typec_ss: endpoint {
 997                         remote-endpoint = <&usb_con_ss>;
 998                 };
 999         };
1000 };
1001
1002 &usb_dwc3_1 {
1003         dr_mode = "host";
1004         status = "okay";
1005 };
1006
1007 &usdhc1 {
1008         assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
1009         assigned-clock-rates = <400000000>;
1010         pinctrl-names = "default", "state_100mhz", "state_200mhz";
1011         pinctrl-0 = <&pinctrl_usdhc1>;
1012         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
1013         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
1014         bus-width = <8>;
1015         non-removable;
1016         status = "okay";
1017 };
1018
1019 &usdhc2 {
1020         assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
1021         assigned-clock-rates = <200000000>;
1022         pinctrl-names = "default", "state_100mhz", "state_200mhz";
1023         pinctrl-0 = <&pinctrl_usdhc2>;
1024         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
1025         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
1026         bus-width = <4>;
1027         vmmc-supply = <&reg_usdhc2_vmmc>;
1028         power-supply = <&wifi_pwr_en>;
1029         broken-cd;
1030         disable-wp;
1031         cap-sdio-irq;
1032         keep-power-in-suspend;
1033         wakeup-source;
1034         status = "okay";
1035 };
1036
1037 &wdog1 {
1038         pinctrl-names = "default";
1039         pinctrl-0 = <&pinctrl_wdog>;
1040         fsl,ext-reset-output;
1041         status = "okay";
1042 };