arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright 2021-2022 TQ-Systems GmbH
   4  * Author: Alexander Stein <alexander.stein@tq-group.com>
   5  */
   6
   7 /dts-v1/;
   8
   9 #include <dt-bindings/leds/common.h>
  10 #include <dt-bindings/net/ti-dp83867.h>
  11 #include <dt-bindings/pwm/pwm.h>
  12 #include "imx8mp-tqma8mpql.dtsi"
  13
  14 / {
  15         model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
  16         compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
  17
  18         chosen {
  19                 stdout-path = &uart4;
  20         };
  21
  22         iio-hwmon {
  23                 compatible = "iio-hwmon";
  24                 io-channels = <&adc 0>, <&adc 1>;
  25         };
  26
  27         aliases {
  28                 mmc0 = &usdhc3;
  29                 mmc1 = &usdhc2;
  30                 mmc2 = &usdhc1;
  31                 rtc0 = &pcf85063;
  32                 rtc1 = &snvs_rtc;
  33                 spi0 = &flexspi;
  34                 spi1 = &ecspi1;
  35                 spi2 = &ecspi2;
  36                 spi3 = &ecspi3;
  37         };
  38
  39         backlight_lvds: backlight {
  40                 compatible = "pwm-backlight";
  41                 pinctrl-names = "default";
  42                 pinctrl-0 = <&pinctrl_backlight>;
  43                 pwms = <&pwm2 0 5000000 0>;
  44                 brightness-levels = <0 4 8 16 32 64 128 255>;
  45                 default-brightness-level = <7>;
  46                 power-supply = <&reg_vcc_12v0>;
  47                 enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
  48                 status = "disabled";
  49         };
  50
  51         gpio-keys {
  52                 compatible = "gpio-keys";
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&pinctrl_gpiobutton>;
  55                 autorepeat;
  56
  57                 switch-1 {
  58                         label = "S12";
  59                         linux,code = <BTN_0>;
  60                         gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 switch-2 {
  64                         label = "S13";
  65                         linux,code = <BTN_1>;
  66                         gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69
  70         gpio-leds {
  71                 compatible = "gpio-leds";
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&pinctrl_gpioled>;
  74
  75                 led-0 {
  76                         color = <LED_COLOR_ID_GREEN>;
  77                         function = LED_FUNCTION_STATUS;
  78                         function-enumerator = <0>;
  79                         gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
  80                         linux,default-trigger = "default-on";
  81                 };
  82
  83                 led-1 {
  84                         color = <LED_COLOR_ID_GREEN>;
  85                         function = LED_FUNCTION_HEARTBEAT;
  86                         gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
  87                         linux,default-trigger = "heartbeat";
  88                 };
  89
  90                 led-2 {
  91                         color = <LED_COLOR_ID_YELLOW>;
  92                         function = LED_FUNCTION_STATUS;
  93                         function-enumerator = <1>;
  94                         gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
  95                 };
  96         };
  97
  98         display: display {
  99                 /*
 100                  * Display is not fixed, so compatible has to be added from
 101                  * DT overlay
 102                  */
 103                 pinctrl-names = "default";
 104                 pinctrl-0 = <&pinctrl_lvdsdisplay>;
 105                 power-supply = <&reg_vcc_3v3>;
 106                 enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 107                 backlight = <&backlight_lvds>;
 108                 status = "disabled";
 109         };
 110
 111         reg_usdhc2_vmmc: regulator-usdhc2 {
 112                 compatible = "regulator-fixed";
 113                 pinctrl-names = "default";
 114                 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
 115                 regulator-name = "VSD_3V3";
 116                 regulator-min-microvolt = <3300000>;
 117                 regulator-max-microvolt = <3300000>;
 118                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 119                 enable-active-high;
 120                 startup-delay-us = <100>;
 121                 off-on-delay-us = <12000>;
 122         };
 123
 124         reg_vcc_12v0: regulator-12v0 {
 125                 compatible = "regulator-fixed";
 126                 pinctrl-names = "default";
 127                 pinctrl-0 = <&pinctrl_reg12v0>;
 128                 regulator-name = "VCC_12V0";
 129                 regulator-min-microvolt = <12000000>;
 130                 regulator-max-microvolt = <12000000>;
 131                 gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
 132                 enable-active-high;
 133         };
 134
 135         reg_vcc_3v3: regulator-3v3 {
 136                 compatible = "regulator-fixed";
 137                 regulator-name = "VCC_3V3";
 138                 regulator-min-microvolt = <3300000>;
 139                 regulator-max-microvolt = <3300000>;
 140         };
 141
 142         reserved-memory {
 143                 #address-cells = <2>;
 144                 #size-cells = <2>;
 145                 ranges;
 146
 147                 ocram: ocram@900000 {
 148                         no-map;
 149                         reg = <0 0x900000 0 0x70000>;
 150                 };
 151
 152                 /* global autoconfigured region for contiguous allocations */
 153                 linux,cma {
 154                         compatible = "shared-dma-pool";
 155                         reusable;
 156                         size = <0 0x38000000>;
 157                         alloc-ranges = <0 0x40000000 0 0xB0000000>;
 158                         linux,cma-default;
 159                 };
 160         };
 161 };
 162
 163 &ecspi1 {
 164         pinctrl-names = "default";
 165         pinctrl-0 = <&pinctrl_ecspi1>;
 166         cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 167         status = "okay";
 168 };
 169
 170 &ecspi2 {
 171         pinctrl-names = "default";
 172         pinctrl-0 = <&pinctrl_ecspi2>;
 173         cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 174         status = "okay";
 175 };
 176
 177 &ecspi3 {
 178         pinctrl-names = "default";
 179         pinctrl-0 = <&pinctrl_ecspi3>;
 180         cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
 181         status = "okay";
 182
 183         adc: adc@0 {
 184                 reg = <0>;
 185                 compatible = "microchip,mcp3202";
 186                 /* 100 ksps * 18 */
 187                 spi-max-frequency = <1800000>;
 188                 vref-supply = <&reg_vcc_3v3>;
 189                 #io-channel-cells = <1>;
 190         };
 191 };
 192
 193 &eqos {
 194         pinctrl-names = "default";
 195         pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
 196         phy-mode = "rgmii-id";
 197         phy-handle = <&ethphy3>;
 198         status = "okay";
 199
 200         mdio {
 201                 compatible = "snps,dwmac-mdio";
 202                 #address-cells = <1>;
 203                 #size-cells = <0>;
 204
 205                 ethphy3: ethernet-phy@3 {
 206                         compatible = "ethernet-phy-ieee802.3-c22";
 207                         reg = <3>;
 208                         ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 209                         ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 210                         ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 211                         ti,dp83867-rxctrl-strap-quirk;
 212                         ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 213                         reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 214                         reset-assert-us = <500000>;
 215                         reset-deassert-us = <50000>;
 216                         enet-phy-lane-no-swap;
 217                         interrupt-parent = <&gpio4>;
 218                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 219                 };
 220         };
 221 };
 222
 223 &fec {
 224         pinctrl-names = "default";
 225         pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
 226         phy-mode = "rgmii-id";
 227         phy-handle = <&ethphy0>;
 228         fsl,magic-packet;
 229         status = "okay";
 230
 231         mdio {
 232                 #address-cells = <1>;
 233                 #size-cells = <0>;
 234
 235                 ethphy0: ethernet-phy@0 {
 236                         compatible = "ethernet-phy-ieee802.3-c22";
 237                         reg = <0>;
 238                         ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 239                         ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 240                         ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 241                         ti,dp83867-rxctrl-strap-quirk;
 242                         ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 243                         reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
 244                         reset-assert-us = <500000>;
 245                         reset-deassert-us = <50000>;
 246                         enet-phy-lane-no-swap;
 247                         interrupt-parent = <&gpio4>;
 248                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 249                 };
 250         };
 251 };
 252
 253 &flexcan1 {
 254         pinctrl-names = "default";
 255         pinctrl-0 = <&pinctrl_flexcan1>;
 256         xceiver-supply = <&reg_vcc_3v3>;
 257         status = "okay";
 258 };
 259
 260 &flexcan2 {
 261         pinctrl-names = "default";
 262         pinctrl-0 = <&pinctrl_flexcan2>;
 263         xceiver-supply = <&reg_vcc_3v3>;
 264         status = "okay";
 265 };
 266
 267 &gpio1 {
 268         pinctrl-names = "default";
 269         pinctrl-0 = <&pinctrl_gpio1>;
 270
 271         gpio-line-names = "GPO1", "GPO0", "", "GPO3",
 272                           "", "", "GPO2", "GPI0",
 273                           "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
 274                           "OTG_PWR", "", "GPI2", "GPI3",
 275                           "", "", "", "",
 276                           "", "", "", "",
 277                           "", "", "", "",
 278                           "", "", "", "";
 279 };
 280
 281 &gpio2 {
 282         pinctrl-names = "default";
 283         pinctrl-0 = <&pinctrl_hoggpio2>;
 284
 285         gpio-line-names = "", "", "", "",
 286                           "", "", "VCC12V_EN", "PERST#",
 287                           "", "", "CLKREQ#", "PEWAKE#",
 288                           "USDHC2_CD", "", "", "",
 289                           "", "", "", "V_SD3V3_EN",
 290                           "", "", "", "",
 291                           "", "", "", "",
 292                           "", "", "", "";
 293
 294         perst-hog {
 295                 gpio-hog;
 296                 gpios = <7 0>;
 297                 output-high;
 298                 line-name = "PERST#";
 299         };
 300
 301         clkreq-hog {
 302                 gpio-hog;
 303                 gpios = <10 0>;
 304                 input;
 305                 line-name = "CLKREQ#";
 306         };
 307
 308         pewake-hog {
 309                 gpio-hog;
 310                 gpios = <11 0>;
 311                 input;
 312                 line-name = "PEWAKE#";
 313         };
 314 };
 315
 316 &gpio3 {
 317         gpio-line-names = "", "", "", "",
 318                           "", "", "", "",
 319                           "", "", "", "",
 320                           "", "", "LVDS0_RESET#", "",
 321                           "", "", "", "LVDS0_BLT_EN",
 322                           "LVDS0_PWR_EN", "", "", "",
 323                           "", "", "", "",
 324                           "", "", "", "";
 325 };
 326
 327 &gpio4 {
 328         pinctrl-names = "default";
 329         pinctrl-0 = <&pinctrl_gpio4>;
 330
 331         gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
 332                           "", "", "", "",
 333                           "", "", "", "",
 334                           "", "", "", "",
 335                           "", "", "DP_IRQ", "DSI_EN",
 336                           "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
 337                           "", "", "", "FAN_PWR",
 338                           "RTC_EVENT#", "CODEC_RST#", "", "";
 339 };
 340
 341 &gpio5 {
 342         gpio-line-names = "", "", "", "LED2",
 343                           "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
 344                           "CSI0_TRIGGER", "CSI0_ENABLE", "", "",
 345                           "", "ECSPI2_SS0", "", "",
 346                           "", "", "", "",
 347                           "", "", "", "",
 348                           "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
 349                           "", "", "", "";
 350 };
 351
 352 &i2c2 {
 353         clock-frequency = <384000>;
 354         pinctrl-names = "default", "gpio";
 355         pinctrl-0 = <&pinctrl_i2c2>;
 356         pinctrl-1 = <&pinctrl_i2c2_gpio>;
 357         scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 358         sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 359         status = "okay";
 360
 361         /* NXP SE97BTP with temperature sensor + eeprom */
 362         se97_1c: temperature-sensor-eeprom@1c {
 363                 compatible = "nxp,se97", "jedec,jc-42.4-temp";
 364                 reg = <0x1c>;
 365         };
 366
 367         at24c02_54: eeprom@54 {
 368                 compatible = "nxp,se97b", "atmel,24c02";
 369                 reg = <0x54>;
 370                 pagesize = <16>;
 371                 vcc-supply = <&reg_vcc_3v3>;
 372         };
 373 };
 374
 375 &i2c4 {
 376         clock-frequency = <384000>;
 377         pinctrl-names = "default", "gpio";
 378         pinctrl-0 = <&pinctrl_i2c4>;
 379         pinctrl-1 = <&pinctrl_i2c4_gpio>;
 380         scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 381         sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 382         status = "okay";
 383 };
 384
 385 &i2c6 {
 386         clock-frequency = <384000>;
 387         pinctrl-names = "default", "gpio";
 388         pinctrl-0 = <&pinctrl_i2c6>;
 389         pinctrl-1 = <&pinctrl_i2c6_gpio>;
 390         scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 391         sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 392         status = "okay";
 393 };
 394
 395 &pcf85063 {
 396         /* RTC_EVENT# is connected on MBa8MPxL */
 397         pinctrl-names = "default";
 398         pinctrl-0 = <&pinctrl_pcf85063>;
 399         interrupt-parent = <&gpio4>;
 400         interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
 401 };
 402
 403 &pwm2 {
 404         pinctrl-names = "default";
 405         pinctrl-0 = <&pinctrl_pwm2>;
 406         status = "disabled";
 407 };
 408
 409 &pwm3 {
 410         pinctrl-names = "default";
 411         pinctrl-0 = <&pinctrl_pwm3>;
 412         status = "okay";
 413 };
 414
 415 &snvs_pwrkey {
 416         status = "okay";
 417 };
 418
 419 &uart1 {
 420         pinctrl-names = "default";
 421         pinctrl-0 = <&pinctrl_uart1>;
 422         assigned-clocks = <&clk IMX8MP_CLK_UART1>;
 423         assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
 424         status = "okay";
 425 };
 426
 427 &uart2 {
 428         pinctrl-names = "default";
 429         pinctrl-0 = <&pinctrl_uart2>;
 430         assigned-clocks = <&clk IMX8MP_CLK_UART2>;
 431         assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
 432         status = "okay";
 433 };
 434
 435 &uart3 {
 436         pinctrl-names = "default";
 437         pinctrl-0 = <&pinctrl_uart3>;
 438         assigned-clocks = <&clk IMX8MP_CLK_UART3>;
 439         assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
 440         status = "okay";
 441 };
 442
 443 &uart4 {
 444         /* console */
 445         pinctrl-names = "default";
 446         pinctrl-0 = <&pinctrl_uart4>;
 447         status = "okay";
 448 };
 449
 450 &usdhc2 {
 451         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 452         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 453         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 454         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 455         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 456         vmmc-supply = <&reg_usdhc2_vmmc>;
 457         no-mmc;
 458         no-sdio;
 459         disable-wp;
 460         bus-width = <4>;
 461         status = "okay";
 462 };
 463
 464 &iomuxc {
 465         pinctrl_backlight: backlightgrp {
 466                 fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19          0x14>;
 467         };
 468
 469         pinctrl_flexcan1: flexcan1grp {
 470                 fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX             0x150>,
 471                            <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX             0x150>;
 472         };
 473
 474         pinctrl_flexcan2: flexcan2grp {
 475                 fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX             0x150>,
 476                            <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX             0x150>;
 477         };
 478
 479         /* only on X57, primary used as CSI0 control signals */
 480         pinctrl_ecspi1: ecspi1grp {
 481                 fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO       0x1c0>,
 482                            <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI       0x1c0>,
 483                            <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK       0x1c0>,
 484                            <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09         0x1c0>;
 485         };
 486
 487         /* on X63 and optionally on X57, can also be used as CSI1 control signals */
 488         pinctrl_ecspi2: ecspi2grp {
 489                 fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO       0x1c0>,
 490                            <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI       0x1c0>,
 491                            <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK       0x1c0>,
 492                            <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13         0x1c0>;
 493         };
 494
 495         pinctrl_ecspi3: ecspi3grp {
 496                 fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI         0x1c0>,
 497                            <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK         0x1c0>,
 498                            <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO         0x1c0>,
 499                            <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25          0x1c0>;
 500         };
 501
 502         pinctrl_eqos: eqosgrp {
 503                 fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC                         0x40000044>,
 504                            <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO                       0x40000044>,
 505                            <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                   0x90>,
 506                            <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                   0x90>,
 507                            <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2                   0x90>,
 508                            <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3                   0x90>,
 509                            <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK   0x90>,
 510                            <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL             0x90>,
 511                            <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0                   0x12>,
 512                            <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1                   0x12>,
 513                            <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2                   0x12>,
 514                            <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3                   0x12>,
 515                            <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL             0x12>,
 516                            <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK   0x14>;
 517         };
 518
 519         pinctrl_eqos_event: eqosevtgrp {
 520                 fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT            0x100>,
 521                            <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN             0x1c0>;
 522         };
 523
 524         pinctrl_eqos_phy: eqosphygrp {
 525                 fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                          0x100>,
 526                            <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                          0x1c0>;
 527         };
 528
 529         pinctrl_fec: fecgrp {
 530                 fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC           0x40000044>,
 531                            <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO          0x40000044>,
 532                            <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0     0x90>,
 533                            <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1     0x90>,
 534                            <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2     0x90>,
 535                            <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3     0x90>,
 536                            <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC      0x90>,
 537                            <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL  0x90>,
 538                            <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0     0x12>,
 539                            <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1     0x12>,
 540                            <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2     0x12>,
 541                            <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3     0x12>,
 542                            <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL  0x12>,
 543                            <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC     0x14>;
 544         };
 545
 546         pinctrl_fec_event: fecevtgrp {
 547                 fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN        0x100>,
 548                            <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT        0x1c0>;
 549         };
 550
 551         pinctrl_fec_phy: fecphygrp {
 552                 fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00          0x100>,
 553                            <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01           0x1c0>;
 554         };
 555
 556         pinctrl_fec_phyalt: fecphyaltgrp {
 557                 fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24          0x180>,
 558                            <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25           0x180>;
 559         };
 560
 561         pinctrl_gpiobutton: gpiobuttongrp {
 562                 fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26          0x10>,
 563                            <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27          0x10>;
 564         };
 565
 566         pinctrl_gpioled: gpioledgrp {
 567                 fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05      0x14>,
 568                            <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04           0x14>,
 569                            <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03           0x14>;
 570         };
 571
 572         pinctrl_gpio1: gpio1grp {
 573                 fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00         0x10>,
 574                            <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01         0x10>,
 575                            <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03         0x10>,
 576                            <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06         0x10>,
 577                            <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07         0x80>,
 578                            <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09         0x80>,
 579                            <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14         0x80>,
 580                            <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15         0x80>;
 581         };
 582
 583         pinctrl_gpio4: gpio4grp {
 584                 fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20          0x180>,
 585                            <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22           0x180>;
 586         };
 587
 588         pinctrl_hdmi: hdmigrp {
 589                 fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>,
 590                            <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>,
 591                            <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD     0x40000010>,
 592                            <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC     0x40000010>;
 593         };
 594
 595         pinctrl_hoggpio2: hoggpio2grp {
 596                 fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07          0x140>,
 597                            <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10        0x140>,
 598                            <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11         0x140>;
 599         };
 600
 601         pinctrl_i2c2: i2c2grp {
 602                 fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL             0x400001e2>,
 603                            <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA             0x400001e2>;
 604         };
 605
 606         pinctrl_i2c2_gpio: i2c2-gpiogrp {
 607                 fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16           0x400001e2>,
 608                            <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17           0x400001e2>;
 609         };
 610
 611         pinctrl_i2c4: i2c4grp {
 612                 fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL             0x400001e2>,
 613                            <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA             0x400001e2>;
 614         };
 615
 616         pinctrl_i2c4_gpio: i2c4-gpiogrp {
 617                 fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20           0x400001e2>,
 618                            <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21           0x400001e2>;
 619         };
 620
 621         pinctrl_i2c6: i2c6grp {
 622                 fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL            0x400001e2>,
 623                            <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA            0x400001e2>;
 624         };
 625
 626         pinctrl_i2c6_gpio: i2c6-gpiogrp {
 627                 fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02          0x400001e2>,
 628                            <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03          0x400001e2>;
 629         };
 630
 631         pinctrl_lvdsdisplay: lvdsdisplaygrp {
 632                 fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20           0x10>; /* Power enable */
 633         };
 634
 635         pinctrl_pcf85063: pcf85063grp {
 636                 fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28          0x80>;
 637         };
 638
 639         /* LVDS Backlight */
 640         pinctrl_pwm2: pwm2grp {
 641                 fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT            0x14>;
 642         };
 643
 644         /* FAN */
 645         pinctrl_pwm3: pwm3grp {
 646                 fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT             0x14>;
 647         };
 648
 649         pinctrl_reg12v0: reg12v0grp {
 650                 fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06          0x140>; /* VCC12V enable */
 651         };
 652
 653         /* X61 */
 654         pinctrl_uart1: uart1grp {
 655                 fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX          0x140>,
 656                            <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX          0x140>;
 657         };
 658
 659         /* X61 */
 660         pinctrl_uart2: uart2grp {
 661                 fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX        0x140>,
 662                            <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX        0x140>;
 663         };
 664
 665         pinctrl_uart3: uart3grp {
 666                 fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX        0x140>,
 667                            <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX        0x140>;
 668         };
 669
 670         pinctrl_uart4: uart4grp {
 671                 fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX        0x140>,
 672                            <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX        0x140>;
 673         };
 674
 675         pinctrl_usdhc2: usdhc2grp {
 676                 fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK            0x192>,
 677                            <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD            0x1d2>,
 678                            <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0        0x1d2>,
 679                            <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1        0x1d2>,
 680                            <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2        0x1d2>,
 681                            <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3        0x1d2>,
 682                            <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT     0xc0>;
 683         };
 684
 685         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 686                 fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK            0x194>,
 687                            <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD            0x1d4>,
 688                            <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0        0x1d4>,
 689                            <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1        0x1d4>,
 690                            <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2        0x1d4>,
 691                            <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3        0x1d4>,
 692                            <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT     0xc0>;
 693         };
 694
 695         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 696                 fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK            0x194>,
 697                            <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD            0x1d4>,
 698                            <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0        0x1d4>,
 699                            <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1        0x1d4>,
 700                            <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2        0x1d4>,
 701                            <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3        0x1d4>,
 702                            <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT     0xc0>;
 703         };
 704
 705         pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
 706                 fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12           0x1c0>;
 707         };
 708 };