arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright 2020 NXP
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/phy/phy-imx8-pcie.h>
   9 #include <dt-bindings/usb/pd.h>
  10 #include "imx8mm.dtsi"
  11
  12 / {
  13         chosen {
  14                 stdout-path = &uart2;
  15         };
  16
  17         memory@40000000 {
  18                 device_type = "memory";
  19                 reg = <0x0 0x40000000 0 0x80000000>;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&pinctrl_gpio_led>;
  26
  27                 status {
  28                         label = "status";
  29                         gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
  30                         default-state = "on";
  31                 };
  32         };
  33
  34         pcie0_refclk: pcie0-refclk {
  35                 compatible = "fixed-clock";
  36                 #clock-cells = <0>;
  37                 clock-frequency = <100000000>;
  38         };
  39
  40         reg_pcie0: regulator-pcie {
  41                 compatible = "regulator-fixed";
  42                 pinctrl-names = "default";
  43                 pinctrl-0 = <&pinctrl_pcie0_reg>;
  44                 regulator-name = "MPCIE_3V3";
  45                 regulator-min-microvolt = <3300000>;
  46                 regulator-max-microvolt = <3300000>;
  47                 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  48                 enable-active-high;
  49         };
  50
  51         reg_usdhc2_vmmc: regulator-usdhc2 {
  52                 compatible = "regulator-fixed";
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
  55                 regulator-name = "VSD_3V3";
  56                 regulator-min-microvolt = <3300000>;
  57                 regulator-max-microvolt = <3300000>;
  58                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
  59                 enable-active-high;
  60         };
  61
  62         backlight: backlight {
  63                 compatible = "pwm-backlight";
  64                 pwms = <&pwm1 0 5000000 0>;
  65                 brightness-levels = <0 255>;
  66                 num-interpolated-steps = <255>;
  67                 default-brightness-level = <250>;
  68         };
  69
  70         ir-receiver {
  71                 compatible = "gpio-ir-receiver";
  72                 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
  73                 pinctrl-names = "default";
  74                 pinctrl-0 = <&pinctrl_ir>;
  75                 linux,autosuspend-period = <125>;
  76         };
  77
  78         audio_codec_bt_sco: audio-codec-bt-sco {
  79                 compatible = "linux,bt-sco";
  80                 #sound-dai-cells = <1>;
  81         };
  82
  83         wm8524: audio-codec {
  84                 #sound-dai-cells = <0>;
  85                 compatible = "wlf,wm8524";
  86                 pinctrl-names = "default";
  87                 pinctrl-0 = <&pinctrl_gpio_wlf>;
  88                 wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
  89         };
  90
  91         sound-bt-sco {
  92                 compatible = "simple-audio-card";
  93                 simple-audio-card,name = "bt-sco-audio";
  94                 simple-audio-card,format = "dsp_a";
  95                 simple-audio-card,bitclock-inversion;
  96                 simple-audio-card,frame-master = <&btcpu>;
  97                 simple-audio-card,bitclock-master = <&btcpu>;
  98
  99                 btcpu: simple-audio-card,cpu {
 100                         sound-dai = <&sai2>;
 101                         dai-tdm-slot-num = <2>;
 102                         dai-tdm-slot-width = <16>;
 103                 };
 104
 105                 simple-audio-card,codec {
 106                         sound-dai = <&audio_codec_bt_sco 1>;
 107                 };
 108         };
 109
 110         sound-wm8524 {
 111                 compatible = "simple-audio-card";
 112                 simple-audio-card,name = "wm8524-audio";
 113                 simple-audio-card,format = "i2s";
 114                 simple-audio-card,frame-master = <&cpudai>;
 115                 simple-audio-card,bitclock-master = <&cpudai>;
 116                 simple-audio-card,widgets =
 117                         "Line", "Left Line Out Jack",
 118                         "Line", "Right Line Out Jack";
 119                 simple-audio-card,routing =
 120                         "Left Line Out Jack", "LINEVOUTL",
 121                         "Right Line Out Jack", "LINEVOUTR";
 122
 123                 cpudai: simple-audio-card,cpu {
 124                         sound-dai = <&sai3>;
 125                         dai-tdm-slot-num = <2>;
 126                         dai-tdm-slot-width = <32>;
 127                 };
 128
 129                 simple-audio-card,codec {
 130                         sound-dai = <&wm8524>;
 131                         clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
 132                 };
 133         };
 134 };
 135
 136 &A53_0 {
 137         cpu-supply = <&buck2_reg>;
 138 };
 139
 140 &A53_1 {
 141         cpu-supply = <&buck2_reg>;
 142 };
 143
 144 &A53_2 {
 145         cpu-supply = <&buck2_reg>;
 146 };
 147
 148 &A53_3 {
 149         cpu-supply = <&buck2_reg>;
 150 };
 151
 152 &fec1 {
 153         pinctrl-names = "default";
 154         pinctrl-0 = <&pinctrl_fec1>;
 155         phy-mode = "rgmii-id";
 156         phy-handle = <&ethphy0>;
 157         fsl,magic-packet;
 158         status = "okay";
 159
 160         mdio {
 161                 #address-cells = <1>;
 162                 #size-cells = <0>;
 163
 164                 ethphy0: ethernet-phy@0 {
 165                         compatible = "ethernet-phy-ieee802.3-c22";
 166                         reg = <0>;
 167                         reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 168                         reset-assert-us = <10000>;
 169                         qca,disable-smarteee;
 170                         vddio-supply = <&vddio>;
 171
 172                         vddio: vddio-regulator {
 173                                 regulator-min-microvolt = <1800000>;
 174                                 regulator-max-microvolt = <1800000>;
 175                         };
 176                 };
 177         };
 178 };
 179
 180 &i2c1 {
 181         clock-frequency = <400000>;
 182         pinctrl-names = "default";
 183         pinctrl-0 = <&pinctrl_i2c1>;
 184         status = "okay";
 185
 186         pmic@4b {
 187                 compatible = "rohm,bd71847";
 188                 reg = <0x4b>;
 189                 pinctrl-names = "default";
 190                 pinctrl-0 = <&pinctrl_pmic>;
 191                 interrupt-parent = <&gpio1>;
 192                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 193                 rohm,reset-snvs-powered;
 194
 195                 #clock-cells = <0>;
 196                 clocks = <&osc_32k 0>;
 197                 clock-output-names = "clk-32k-out";
 198
 199                 regulators {
 200                         buck1_reg: BUCK1 {
 201                                 regulator-name = "buck1";
 202                                 regulator-min-microvolt = <700000>;
 203                                 regulator-max-microvolt = <1300000>;
 204                                 regulator-boot-on;
 205                                 regulator-always-on;
 206                                 regulator-ramp-delay = <1250>;
 207                         };
 208
 209                         buck2_reg: BUCK2 {
 210                                 regulator-name = "buck2";
 211                                 regulator-min-microvolt = <700000>;
 212                                 regulator-max-microvolt = <1300000>;
 213                                 regulator-boot-on;
 214                                 regulator-always-on;
 215                                 regulator-ramp-delay = <1250>;
 216                                 rohm,dvs-run-voltage = <1000000>;
 217                                 rohm,dvs-idle-voltage = <900000>;
 218                         };
 219
 220                         buck3_reg: BUCK3 {
 221                                 // BUCK5 in datasheet
 222                                 regulator-name = "buck3";
 223                                 regulator-min-microvolt = <700000>;
 224                                 regulator-max-microvolt = <1350000>;
 225                                 regulator-boot-on;
 226                                 regulator-always-on;
 227                         };
 228
 229                         buck4_reg: BUCK4 {
 230                                 // BUCK6 in datasheet
 231                                 regulator-name = "buck4";
 232                                 regulator-min-microvolt = <3000000>;
 233                                 regulator-max-microvolt = <3300000>;
 234                                 regulator-boot-on;
 235                                 regulator-always-on;
 236                         };
 237
 238                         buck5_reg: BUCK5 {
 239                                 // BUCK7 in datasheet
 240                                 regulator-name = "buck5";
 241                                 regulator-min-microvolt = <1605000>;
 242                                 regulator-max-microvolt = <1995000>;
 243                                 regulator-boot-on;
 244                                 regulator-always-on;
 245                         };
 246
 247                         buck6_reg: BUCK6 {
 248                                 // BUCK8 in datasheet
 249                                 regulator-name = "buck6";
 250                                 regulator-min-microvolt = <800000>;
 251                                 regulator-max-microvolt = <1400000>;
 252                                 regulator-boot-on;
 253                                 regulator-always-on;
 254                         };
 255
 256                         ldo1_reg: LDO1 {
 257                                 regulator-name = "ldo1";
 258                                 regulator-min-microvolt = <1600000>;
 259                                 regulator-max-microvolt = <3300000>;
 260                                 regulator-boot-on;
 261                                 regulator-always-on;
 262                         };
 263
 264                         ldo2_reg: LDO2 {
 265                                 regulator-name = "ldo2";
 266                                 regulator-min-microvolt = <800000>;
 267                                 regulator-max-microvolt = <900000>;
 268                                 regulator-boot-on;
 269                                 regulator-always-on;
 270                         };
 271
 272                         ldo3_reg: LDO3 {
 273                                 regulator-name = "ldo3";
 274                                 regulator-min-microvolt = <1800000>;
 275                                 regulator-max-microvolt = <3300000>;
 276                                 regulator-boot-on;
 277                                 regulator-always-on;
 278                         };
 279
 280                         ldo4_reg: LDO4 {
 281                                 regulator-name = "ldo4";
 282                                 regulator-min-microvolt = <900000>;
 283                                 regulator-max-microvolt = <1800000>;
 284                                 regulator-boot-on;
 285                                 regulator-always-on;
 286                         };
 287
 288                         ldo6_reg: LDO6 {
 289                                 regulator-name = "ldo6";
 290                                 regulator-min-microvolt = <900000>;
 291                                 regulator-max-microvolt = <1800000>;
 292                                 regulator-boot-on;
 293                                 regulator-always-on;
 294                         };
 295                 };
 296         };
 297 };
 298
 299 &i2c2 {
 300         clock-frequency = <400000>;
 301         pinctrl-names = "default";
 302         pinctrl-0 = <&pinctrl_i2c2>;
 303         status = "okay";
 304
 305         ptn5110: tcpc@50 {
 306                 compatible = "nxp,ptn5110";
 307                 pinctrl-names = "default";
 308                 pinctrl-0 = <&pinctrl_typec1>;
 309                 reg = <0x50>;
 310                 interrupt-parent = <&gpio2>;
 311                 interrupts = <11 8>;
 312                 status = "okay";
 313
 314                 port {
 315                         typec1_dr_sw: endpoint {
 316                                 remote-endpoint = <&usb1_drd_sw>;
 317                         };
 318                 };
 319
 320                 typec1_con: connector {
 321                         compatible = "usb-c-connector";
 322                         label = "USB-C";
 323                         power-role = "dual";
 324                         data-role = "dual";
 325                         try-power-role = "sink";
 326                         source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 327                         sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
 328                                      PDO_VAR(5000, 20000, 3000)>;
 329                         op-sink-microwatt = <15000000>;
 330                         self-powered;
 331                 };
 332         };
 333 };
 334
 335 &i2c3 {
 336         clock-frequency = <400000>;
 337         pinctrl-names = "default";
 338         pinctrl-0 = <&pinctrl_i2c3>;
 339         status = "okay";
 340
 341         pca6416: gpio@20 {
 342                 compatible = "ti,tca6416";
 343                 reg = <0x20>;
 344                 gpio-controller;
 345                 #gpio-cells = <2>;
 346         };
 347 };
 348
 349 &pcie_phy {
 350         fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 351         fsl,tx-deemph-gen1 = <0x2d>;
 352         fsl,tx-deemph-gen2 = <0xf>;
 353         clocks = <&pcie0_refclk>;
 354         status = "okay";
 355 };
 356
 357 &pcie0 {
 358         pinctrl-names = "default";
 359         pinctrl-0 = <&pinctrl_pcie0>;
 360         reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
 361         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
 362                  <&pcie0_refclk>;
 363         clock-names = "pcie", "pcie_aux", "pcie_bus";
 364         assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 365                           <&clk IMX8MM_CLK_PCIE1_CTRL>;
 366         assigned-clock-rates = <10000000>, <250000000>;
 367         assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 368                                  <&clk IMX8MM_SYS_PLL2_250M>;
 369         vpcie-supply = <&reg_pcie0>;
 370         status = "okay";
 371 };
 372
 373 &sai2 {
 374         #sound-dai-cells = <0>;
 375         pinctrl-names = "default";
 376         pinctrl-0 = <&pinctrl_sai2>;
 377         assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
 378         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 379         assigned-clock-rates = <24576000>;
 380         status = "okay";
 381 };
 382
 383 &sai3 {
 384         pinctrl-names = "default";
 385         pinctrl-0 = <&pinctrl_sai3>;
 386         assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
 387         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 388         assigned-clock-rates = <24576000>;
 389         status = "okay";
 390 };
 391
 392 &snvs_pwrkey {
 393         status = "okay";
 394 };
 395
 396 &uart2 { /* console */
 397         pinctrl-names = "default";
 398         pinctrl-0 = <&pinctrl_uart2>;
 399         status = "okay";
 400 };
 401
 402 &usbotg1 {
 403         dr_mode = "otg";
 404         hnp-disable;
 405         srp-disable;
 406         adp-disable;
 407         usb-role-switch;
 408         disable-over-current;
 409         samsung,picophy-pre-emp-curr-control = <3>;
 410         samsung,picophy-dc-vol-level-adjust = <7>;
 411         status = "okay";
 412
 413         port {
 414                 usb1_drd_sw: endpoint {
 415                         remote-endpoint = <&typec1_dr_sw>;
 416                 };
 417         };
 418 };
 419
 420 &usdhc2 {
 421         assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
 422         assigned-clock-rates = <200000000>;
 423         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 424         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 425         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 426         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 427         cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 428         bus-width = <4>;
 429         vmmc-supply = <&reg_usdhc2_vmmc>;
 430         status = "okay";
 431 };
 432
 433 &wdog1 {
 434         pinctrl-names = "default";
 435         pinctrl-0 = <&pinctrl_wdog>;
 436         fsl,ext-reset-output;
 437         status = "okay";
 438 };
 439
 440 &pwm1 {
 441         pinctrl-names = "default";
 442         pinctrl-0 = <&pinctrl_backlight>;
 443         status = "okay";
 444 };
 445
 446 &iomuxc {
 447         pinctrl_fec1: fec1grp {
 448                 fsl,pins = <
 449                         MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
 450                         MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
 451                         MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
 452                         MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
 453                         MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
 454                         MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
 455                         MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
 456                         MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
 457                         MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
 458                         MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
 459                         MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
 460                         MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
 461                         MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
 462                         MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
 463                         MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                0x19
 464                 >;
 465         };
 466
 467         pinctrl_gpio_led: gpioledgrp {
 468                 fsl,pins = <
 469                         MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x19
 470                 >;
 471         };
 472
 473         pinctrl_ir: irgrp {
 474                 fsl,pins = <
 475                         MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
 476                 >;
 477         };
 478
 479         pinctrl_gpio_wlf: gpiowlfgrp {
 480                 fsl,pins = <
 481                         MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21        0xd6
 482                 >;
 483         };
 484
 485         pinctrl_i2c1: i2c1grp {
 486                 fsl,pins = <
 487                         MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL                  0x400001c3
 488                         MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA                  0x400001c3
 489                 >;
 490         };
 491
 492         pinctrl_i2c2: i2c2grp {
 493                 fsl,pins = <
 494                         MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL                  0x400001c3
 495                         MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA                  0x400001c3
 496                 >;
 497         };
 498
 499         pinctrl_i2c3: i2c3grp {
 500                 fsl,pins = <
 501                         MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL                  0x400001c3
 502                         MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA                  0x400001c3
 503                 >;
 504         };
 505
 506         pinctrl_pcie0: pcie0grp {
 507                 fsl,pins = <
 508                         MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
 509                         MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
 510                 >;
 511         };
 512
 513         pinctrl_pcie0_reg: pcie0reggrp {
 514                 fsl,pins = <
 515                         MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
 516                 >;
 517         };
 518
 519         pinctrl_pmic: pmicirqgrp {
 520                 fsl,pins = <
 521                         MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3               0x141
 522                 >;
 523         };
 524
 525         pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 526                 fsl,pins = <
 527                         MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
 528                 >;
 529         };
 530
 531         pinctrl_sai2: sai2grp {
 532                 fsl,pins = <
 533                         MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
 534                         MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
 535                         MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
 536                         MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
 537                 >;
 538         };
 539
 540         pinctrl_sai3: sai3grp {
 541                 fsl,pins = <
 542                         MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
 543                         MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
 544                         MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
 545                         MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
 546                 >;
 547         };
 548
 549         pinctrl_typec1: typec1grp {
 550                 fsl,pins = <
 551                         MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x159
 552                 >;
 553         };
 554
 555         pinctrl_uart2: uart2grp {
 556                 fsl,pins = <
 557                         MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
 558                         MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
 559                 >;
 560         };
 561
 562         pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
 563                 fsl,pins = <
 564                         MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15      0x1c4
 565                 >;
 566         };
 567
 568         pinctrl_usdhc2: usdhc2grp {
 569                 fsl,pins = <
 570                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x190
 571                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d0
 572                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
 573                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
 574                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
 575                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
 576                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
 577                 >;
 578         };
 579
 580         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 581                 fsl,pins = <
 582                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x194
 583                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d4
 584                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
 585                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
 586                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
 587                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
 588                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
 589                 >;
 590         };
 591
 592         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 593                 fsl,pins = <
 594                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x196
 595                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d6
 596                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
 597                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
 598                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
 599                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
 600                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
 601                 >;
 602         };
 603
 604         pinctrl_wdog: wdoggrp {
 605                 fsl,pins = <
 606                         MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0x166
 607                 >;
 608         };
 609
 610         pinctrl_backlight: backlightgrp {
 611                 fsl,pins = <
 612                         MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT        0x06
 613                 >;
 614         };
 615 };