arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for Freescale LS2080A RDB Board.
   4  *
   5  * Copyright 2016 Freescale Semiconductor, Inc.
   6  * Copyright 2017-2020 NXP
   7  *
   8  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
   9  *
  10  */
  11
  12 &esdhc {
  13         status = "okay";
  14 };
  15
  16 &ifc {
  17         status = "okay";
  18         #address-cells = <2>;
  19         #size-cells = <1>;
  20         ranges = <0x0 0x0 0x5 0x80000000 0x08000000
  21                   0x2 0x0 0x5 0x30000000 0x00010000
  22                   0x3 0x0 0x5 0x20000000 0x00010000>;
  23
  24         nor@0,0 {
  25                 #address-cells = <1>;
  26                 #size-cells = <1>;
  27                 compatible = "cfi-flash";
  28                 reg = <0x0 0x0 0x8000000>;
  29                 bank-width = <2>;
  30                 device-width = <1>;
  31         };
  32
  33         nand@2,0 {
  34              compatible = "fsl,ifc-nand";
  35              reg = <0x2 0x0 0x10000>;
  36         };
  37
  38         cpld@3,0 {
  39              reg = <0x3 0x0 0x10000>;
  40              compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
  41         };
  42
  43 };
  44
  45 &i2c0 {
  46         status = "okay";
  47         pca9547@75 {
  48                 compatible = "nxp,pca9547";
  49                 reg = <0x75>;
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52                 idle-state = <0>;
  53
  54                 i2c@1 {
  55                         #address-cells = <1>;
  56                         #size-cells = <0>;
  57                         reg = <0x01>;
  58                         rtc@68 {
  59                                 compatible = "dallas,ds3232";
  60                                 reg = <0x68>;
  61                                 /* IRQ_RTC_B -> IRQ06, active low */
  62                                 interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
  63                         };
  64                 };
  65
  66                 i2c@2 {
  67                         #address-cells = <1>;
  68                         #size-cells = <0>;
  69                         reg = <0x02>;
  70
  71                         ina220@40 {
  72                                 compatible = "ti,ina220";
  73                                 reg = <0x40>;
  74                                 shunt-resistor = <500>;
  75                         };
  76                 };
  77
  78                 i2c@3 {
  79                         #address-cells = <1>;
  80                         #size-cells = <0>;
  81                         reg = <0x3>;
  82
  83                         adt7481@4c {
  84                                 compatible = "adi,adt7461";
  85                                 reg = <0x4c>;
  86                         };
  87                 };
  88         };
  89 };
  90
  91 &i2c1 {
  92         status = "disabled";
  93 };
  94
  95 &i2c2 {
  96         status = "disabled";
  97 };
  98
  99 &i2c3 {
 100         status = "disabled";
 101 };
 102
 103 &dspi {
 104         status = "okay";
 105         dflash0: flash@0 {
 106                 #address-cells = <1>;
 107                 #size-cells = <1>;
 108                 compatible = "st,m25p80";
 109                 spi-max-frequency = <3000000>;
 110                 reg = <0>;
 111         };
 112 };
 113
 114 &qspi {
 115         status = "okay";
 116
 117         s25fs512s0: flash@0 {
 118                 #address-cells = <1>;
 119                 #size-cells = <1>;
 120                 compatible = "jedec,spi-nor";
 121                 spi-max-frequency = <50000000>;
 122                 reg = <0>;
 123         };
 124 };
 125
 126 &sata0 {
 127         status = "okay";
 128 };
 129
 130 &sata1 {
 131         status = "okay";
 132 };
 133
 134 &usb0 {
 135         status = "okay";
 136 };
 137
 138 &usb1 {
 139         status = "okay";
 140 };