arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
   4  *
   5  * Copyright 2014-2015 Freescale Semiconductor, Inc.
   6  * Copyright 2018-2021 NXP
   7  *
   8  * Mingkai Hu <Mingkai.hu@freescale.com>
   9  */
  10
  11 /dts-v1/;
  12 #include "fsl-ls1043a.dtsi"
  13
  14 / {
  15         model = "LS1043A QDS Board";
  16         compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
  17
  18         aliases {
  19                 gpio0 = &gpio1;
  20                 gpio1 = &gpio2;
  21                 gpio2 = &gpio3;
  22                 gpio3 = &gpio4;
  23                 serial0 = &duart0;
  24                 serial1 = &duart1;
  25                 serial2 = &duart2;
  26                 serial3 = &duart3;
  27                 sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
  28                 sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
  29                 sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
  30                 sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
  31                 qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
  32                 qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
  33                 qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
  34                 qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
  35                 qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
  36                 qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
  37                 qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
  38                 qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
  39                 emi1-slot1 = &ls1043mdio_s1;
  40                 emi1-slot2 = &ls1043mdio_s2;
  41                 emi1-slot3 = &ls1043mdio_s3;
  42                 emi1-slot4 = &ls1043mdio_s4;
  43         };
  44
  45         chosen {
  46                 stdout-path = "serial0:115200n8";
  47         };
  48 };
  49
  50 &duart0 {
  51         status = "okay";
  52 };
  53
  54 &duart1 {
  55         status = "okay";
  56 };
  57
  58 &ifc {
  59         #address-cells = <2>;
  60         #size-cells = <1>;
  61         /* NOR, NAND Flashes and FPGA on board */
  62         ranges = <0x0 0x0 0x0 0x60000000 0x08000000
  63                   0x1 0x0 0x0 0x7e800000 0x00010000
  64                   0x2 0x0 0x0 0x7fb00000 0x00000100>;
  65         status = "okay";
  66
  67         nor@0,0 {
  68                 compatible = "cfi-flash";
  69                 reg = <0x0 0x0 0x8000000>;
  70                 big-endian;
  71                 bank-width = <2>;
  72                 device-width = <1>;
  73         };
  74
  75         nand@1,0 {
  76                 compatible = "fsl,ifc-nand";
  77                 reg = <0x1 0x0 0x10000>;
  78         };
  79
  80         fpga: board-control@2,0 {
  81                 compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
  82                 reg = <0x2 0x0 0x0000100>;
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85                 ranges = <0 2 0 0x100>;
  86         };
  87 };
  88
  89 &i2c0 {
  90         status = "okay";
  91
  92         i2c-mux@77 {
  93                 compatible = "nxp,pca9547";
  94                 reg = <0x77>;
  95                 #address-cells = <1>;
  96                 #size-cells = <0>;
  97
  98                 i2c@0 {
  99                         #address-cells = <1>;
 100                         #size-cells = <0>;
 101                         reg = <0x0>;
 102
 103                         rtc@68 {
 104                                 compatible = "dallas,ds3232";
 105                                 reg = <0x68>;
 106                                 /* IRQ10_B */
 107                                 interrupts = <0 150 0x4>;
 108                         };
 109                 };
 110
 111                 i2c@2 {
 112                         #address-cells = <1>;
 113                         #size-cells = <0>;
 114                         reg = <0x2>;
 115
 116                         ina220@40 {
 117                                 compatible = "ti,ina220";
 118                                 reg = <0x40>;
 119                                 shunt-resistor = <1000>;
 120                         };
 121
 122                         ina220@41 {
 123                                 compatible = "ti,ina220";
 124                                 reg = <0x41>;
 125                                 shunt-resistor = <1000>;
 126                         };
 127                 };
 128
 129                 i2c@3 {
 130                         #address-cells = <1>;
 131                         #size-cells = <0>;
 132                         reg = <0x3>;
 133
 134                         eeprom@56 {
 135                                 compatible = "atmel,24c512";
 136                                 reg = <0x56>;
 137                         };
 138
 139                         eeprom@57 {
 140                                 compatible = "atmel,24c512";
 141                                 reg = <0x57>;
 142                         };
 143
 144                         temp-sensor@4c {
 145                                 compatible = "adi,adt7461a";
 146                                 reg = <0x4c>;
 147                         };
 148                 };
 149         };
 150 };
 151
 152 &lpuart0 {
 153         status = "okay";
 154 };
 155
 156 &qspi {
 157         status = "okay";
 158
 159         qflash0: flash@0 {
 160                 compatible = "spansion,m25p80";
 161                 #address-cells = <1>;
 162                 #size-cells = <1>;
 163                 spi-max-frequency = <20000000>;
 164                 spi-rx-bus-width = <4>;
 165                 spi-tx-bus-width = <4>;
 166                 reg = <0>;
 167         };
 168 };
 169
 170 &usb0 {
 171         status = "okay";
 172 };
 173
 174 #include "fsl-ls1043-post.dtsi"
 175
 176 &fman0 {
 177         ethernet@e0000 {
 178                 phy-handle = <&qsgmii_phy_s2_p1>;
 179                 phy-connection-type = "sgmii";
 180         };
 181
 182         ethernet@e2000 {
 183                 phy-handle = <&qsgmii_phy_s2_p2>;
 184                 phy-connection-type = "sgmii";
 185         };
 186
 187         ethernet@e4000 {
 188                 phy-handle = <&rgmii_phy1>;
 189                 phy-connection-type = "rgmii";
 190         };
 191
 192         ethernet@e6000 {
 193                 phy-handle = <&rgmii_phy2>;
 194                 phy-connection-type = "rgmii";
 195         };
 196
 197         ethernet@e8000 {
 198                 phy-handle = <&qsgmii_phy_s2_p3>;
 199                 phy-connection-type = "sgmii";
 200         };
 201
 202         ethernet@ea000 {
 203                 phy-handle = <&qsgmii_phy_s2_p4>;
 204                 phy-connection-type = "sgmii";
 205         };
 206
 207         ethernet@f0000 { /* DTSEC9/10GEC1 */
 208                 fixed-link = <1 1 10000 0 0>;
 209                 phy-connection-type = "xgmii";
 210         };
 211 };
 212
 213 &fpga {
 214         mdio-mux-emi1@54 {
 215                 compatible = "mdio-mux-mmioreg", "mdio-mux";
 216                 mdio-parent-bus = <&mdio0>;
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219                 reg = <0x54 1>;    /* BRDCFG4 */
 220                 mux-mask = <0xe0>; /* EMI1 */
 221
 222                 /* On-board RGMII1 PHY */
 223                 ls1043mdio0: mdio@0 {
 224                         reg = <0>;
 225                         #address-cells = <1>;
 226                         #size-cells = <0>;
 227
 228                         rgmii_phy1: ethernet-phy@1 { /* MAC3 */
 229                                 reg = <0x1>;
 230                         };
 231                 };
 232
 233                 /* On-board RGMII2 PHY */
 234                 ls1043mdio1: mdio@20 {
 235                         reg = <0x20>;
 236                         #address-cells = <1>;
 237                         #size-cells = <0>;
 238
 239                         rgmii_phy2: ethernet-phy@2 { /* MAC4 */
 240                                 reg = <0x2>;
 241                         };
 242                 };
 243
 244                 /* Slot 1 */
 245                 ls1043mdio_s1: mdio@40 {
 246                         reg = <0x40>;
 247                         #address-cells = <1>;
 248                         #size-cells = <0>;
 249                         status = "disabled";
 250
 251                         qsgmii_phy_s1_p1: ethernet-phy@4 {
 252                                 reg = <0x4>;
 253                         };
 254
 255                         qsgmii_phy_s1_p2: ethernet-phy@5 {
 256                                 reg = <0x5>;
 257                         };
 258
 259                         qsgmii_phy_s1_p3: ethernet-phy@6 {
 260                                 reg = <0x6>;
 261                         };
 262
 263                         qsgmii_phy_s1_p4: ethernet-phy@7 {
 264                                 reg = <0x7>;
 265                         };
 266
 267                         sgmii_phy_s1_p1: ethernet-phy@1c {
 268                                 reg = <0x1c>;
 269                         };
 270                 };
 271
 272                 /* Slot 2 */
 273                 ls1043mdio_s2: mdio@60 {
 274                         reg = <0x60>;
 275                         #address-cells = <1>;
 276                         #size-cells = <0>;
 277                         status = "disabled";
 278
 279                         qsgmii_phy_s2_p1: ethernet-phy@8 {
 280                                 reg = <0x8>;
 281                         };
 282
 283                         qsgmii_phy_s2_p2: ethernet-phy@9 {
 284                                 reg = <0x9>;
 285                         };
 286
 287                         qsgmii_phy_s2_p3: ethernet-phy@a {
 288                                 reg = <0xa>;
 289                         };
 290
 291                         qsgmii_phy_s2_p4: ethernet-phy@b {
 292                                 reg = <0xb>;
 293                         };
 294
 295                         sgmii_phy_s2_p1: ethernet-phy@1c {
 296                                 reg = <0x1c>;
 297                         };
 298                 };
 299
 300                 /* Slot 3 */
 301                 ls1043mdio_s3: mdio@80 {
 302                         reg = <0x80>;
 303                         #address-cells = <1>;
 304                         #size-cells = <0>;
 305                         status = "disabled";
 306
 307                         sgmii_phy_s3_p1: ethernet-phy@1c {
 308                                 reg = <0x1c>;
 309                         };
 310                 };
 311
 312                 /* Slot 4 */
 313                 ls1043mdio_s4: mdio@a0 {
 314                         reg = <0xa0>;
 315                         #address-cells = <1>;
 316                         #size-cells = <0>;
 317                         status = "disabled";
 318
 319                         sgmii_phy_s4_p1: ethernet-phy@1c {
 320                                 reg = <0x1c>;
 321                         };
 322                 };
 323         };
 324 };