1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung Exynos7 Espresso board device tree source
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
10 #include "exynos7.dtsi"
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/samsung,s2mps11.h>
13 #include <dt-bindings/gpio/gpio.h>
16 model = "Samsung Exynos7 Espresso board based on Exynos7";
17 compatible = "samsung,exynos7-espresso", "samsung,exynos7";
26 stdout-path = &serial_2;
30 device_type = "memory";
31 reg = <0x0 0x40000000 0x0 0xC0000000>;
34 usb30_vbus_reg: regulator-usb30 {
35 compatible = "regulator-fixed";
36 regulator-name = "VBUS_5V";
37 regulator-min-microvolt = <5000000>;
38 regulator-max-microvolt = <5000000>;
39 gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
40 pinctrl-names = "default";
41 pinctrl-0 = <&usb30_vbus_en>;
45 usb3drd_boost_5v: regulator-usb3drd-boost {
46 compatible = "regulator-fixed";
47 regulator-name = "VUSB_VBUS_5V";
48 regulator-min-microvolt = <5000000>;
49 regulator-max-microvolt = <5000000>;
50 gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
51 pinctrl-names = "default";
52 pinctrl-0 = <&usb3drd_boost_en>;
59 clock-frequency = <24000000>;
63 mali-supply = <&buck6_reg>;
73 clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
74 clock-names = "rtc", "rtc_src";
86 samsung,i2c-sda-delay = <100>;
87 samsung,i2c-max-bus-freq = <200000>;
91 compatible = "samsung,s2mps15-pmic";
93 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
94 interrupt-parent = <&gpa0>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&pmic_irq>;
100 compatible = "samsung,s2mps13-clk";
102 clock-output-names = "s2mps13_ap", "s2mps13_cp",
108 regulator-name = "vdd_ldo1";
109 regulator-min-microvolt = <500000>;
110 regulator-max-microvolt = <900000>;
112 regulator-enable-ramp-delay = <125>;
116 regulator-name = "vqmmc-sdcard";
117 regulator-min-microvolt = <1620000>;
118 regulator-max-microvolt = <3300000>;
120 regulator-enable-ramp-delay = <125>;
124 regulator-name = "vdd_ldo3";
125 regulator-min-microvolt = <1620000>;
126 regulator-max-microvolt = <1980000>;
129 regulator-enable-ramp-delay = <125>;
133 regulator-name = "vdd_ldo4";
134 regulator-min-microvolt = <800000>;
135 regulator-max-microvolt = <1110000>;
137 regulator-enable-ramp-delay = <125>;
141 regulator-name = "vdd_ldo5";
142 regulator-min-microvolt = <1620000>;
143 regulator-max-microvolt = <1980000>;
145 regulator-enable-ramp-delay = <125>;
149 regulator-name = "vdd_ldo6";
150 regulator-min-microvolt = <2250000>;
151 regulator-max-microvolt = <3300000>;
152 regulator-enable-ramp-delay = <125>;
156 regulator-name = "vdd_ldo7";
157 regulator-min-microvolt = <700000>;
158 regulator-max-microvolt = <1150000>;
159 regulator-enable-ramp-delay = <125>;
164 regulator-name = "vdd_ldo8";
165 regulator-min-microvolt = <700000>;
166 regulator-max-microvolt = <1000000>;
167 regulator-enable-ramp-delay = <125>;
171 regulator-name = "vdd_ldo9";
172 regulator-min-microvolt = <700000>;
173 regulator-max-microvolt = <1000000>;
174 regulator-enable-ramp-delay = <125>;
178 regulator-name = "vdd_ldo10";
179 regulator-min-microvolt = <700000>;
180 regulator-max-microvolt = <1000000>;
181 regulator-enable-ramp-delay = <125>;
185 regulator-name = "vdd_ldo11";
186 regulator-min-microvolt = <1000000>;
187 regulator-max-microvolt = <1300000>;
189 regulator-enable-ramp-delay = <125>;
193 regulator-name = "vdd_ldo12";
194 regulator-min-microvolt = <1000000>;
195 regulator-max-microvolt = <1300000>;
196 regulator-enable-ramp-delay = <125>;
201 regulator-name = "vdd_ldo13";
202 regulator-min-microvolt = <1000000>;
203 regulator-max-microvolt = <1300000>;
205 regulator-enable-ramp-delay = <125>;
209 regulator-name = "vdd_ldo14";
210 regulator-min-microvolt = <1800000>;
211 regulator-max-microvolt = <3375000>;
212 regulator-enable-ramp-delay = <125>;
216 regulator-name = "vmmc-sdcard";
217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <3375000>;
219 regulator-enable-ramp-delay = <125>;
223 regulator-name = "vdd_ldo18";
224 regulator-min-microvolt = <1500000>;
225 regulator-max-microvolt = <2275000>;
226 regulator-enable-ramp-delay = <125>;
230 regulator-name = "vdd_ldo19";
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <3375000>;
233 regulator-enable-ramp-delay = <125>;
237 regulator-name = "vdd_ldo21";
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <3375000>;
240 regulator-enable-ramp-delay = <125>;
244 regulator-name = "vdd_ldo23";
245 regulator-min-microvolt = <1500000>;
246 regulator-max-microvolt = <2275000>;
247 regulator-enable-ramp-delay = <125>;
251 regulator-name = "vdd_ldo25";
252 regulator-min-microvolt = <1800000>;
253 regulator-max-microvolt = <3375000>;
254 regulator-enable-ramp-delay = <125>;
258 regulator-name = "vdd_ldo26";
259 regulator-min-microvolt = <700000>;
260 regulator-max-microvolt = <1470000>;
261 regulator-enable-ramp-delay = <125>;
265 regulator-name = "vdd_ldo27";
266 regulator-min-microvolt = <1500000>;
267 regulator-max-microvolt = <2275000>;
268 regulator-enable-ramp-delay = <125>;
272 regulator-name = "vdd_mif";
273 regulator-min-microvolt = <500000>;
274 regulator-max-microvolt = <1200000>;
277 regulator-ramp-delay = <25000>;
278 regulator-enable-ramp-delay = <250>;
282 regulator-name = "vdd_atlas";
283 regulator-min-microvolt = <500000>;
284 regulator-max-microvolt = <1200000>;
287 regulator-ramp-delay = <12500>;
288 regulator-enable-ramp-delay = <250>;
292 regulator-name = "vdd_int";
293 regulator-min-microvolt = <500000>;
294 regulator-max-microvolt = <1200000>;
297 regulator-ramp-delay = <12500>;
298 regulator-enable-ramp-delay = <250>;
302 regulator-name = "vdd_buck5";
303 regulator-min-microvolt = <500000>;
304 regulator-max-microvolt = <1300000>;
305 regulator-ramp-delay = <25000>;
306 regulator-enable-ramp-delay = <250>;
310 regulator-name = "vdd_g3d";
311 regulator-min-microvolt = <500000>;
312 regulator-max-microvolt = <1400000>;
313 regulator-ramp-delay = <12500>;
314 regulator-enable-ramp-delay = <250>;
318 regulator-name = "vdd_buck7";
319 regulator-min-microvolt = <1000000>;
320 regulator-max-microvolt = <1500000>;
322 regulator-ramp-delay = <25000>;
323 regulator-enable-ramp-delay = <250>;
327 regulator-name = "vdd_buck8";
328 regulator-min-microvolt = <1000000>;
329 regulator-max-microvolt = <1500000>;
331 regulator-ramp-delay = <25000>;
332 regulator-enable-ramp-delay = <250>;
336 regulator-name = "vdd_buck9";
337 regulator-min-microvolt = <1800000>;
338 regulator-max-microvolt = <2100000>;
340 regulator-ramp-delay = <25000>;
341 regulator-enable-ramp-delay = <250>;
345 regulator-name = "vdd_buck10";
346 regulator-min-microvolt = <1000000>;
347 regulator-max-microvolt = <3000000>;
349 regulator-ramp-delay = <25000>;
350 regulator-enable-ramp-delay = <250>;
357 pmic_irq: pmic-irq-pins {
358 samsung,pins = "gpa0-2";
359 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
360 samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
369 card-detect-delay = <200>;
370 clock-frequency = <800000000>;
371 samsung,dw-mshc-ciu-div = <3>;
372 samsung,dw-mshc-sdr-timing = <0 4>;
373 samsung,dw-mshc-ddr-timing = <0 2>;
374 pinctrl-names = "default";
375 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
382 card-detect-delay = <200>;
383 clock-frequency = <400000000>;
384 samsung,dw-mshc-ciu-div = <3>;
385 samsung,dw-mshc-sdr-timing = <2 3>;
386 samsung,dw-mshc-ddr-timing = <1 2>;
387 pinctrl-names = "default";
388 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
390 vmmc-supply = <&ldo17_reg>;
391 vqmmc-supply = <&ldo2_reg>;
396 usb30_vbus_en: usb30-vbus-en-pins {
397 samsung,pins = "gph1-1";
398 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
399 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
400 samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
403 usb3drd_boost_en: usb3drd-boost-en-pins {
404 samsung,pins = "gpf4-1";
405 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
406 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
407 samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
416 vdd10-supply = <&ldo4_reg>;
417 vdd33-supply = <&ldo6_reg>;
421 vbus-supply = <&usb30_vbus_reg>;
422 vbus-boost-supply = <&usb3drd_boost_5v>;