arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
   2 /*
   3  *Copyright(c) 2018 Broadcom
   4  */
   5         usb {
   6                 compatible = "simple-bus";
   7                 #address-cells = <2>;
   8                 #size-cells = <2>;
   9                 ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
  10
  11                 /*
  12                  * Internally, USB bus to the interconnect can only address up
  13                  * to 40-bit
  14                  */
  15                 dma-ranges = <0 0 0 0 0x100 0x0>;
  16
  17                 usbphy0: usb-phy@0 {
  18                         compatible = "brcm,sr-usb-combo-phy";
  19                         reg = <0x0 0x00000000 0x0 0x100>;
  20                         #phy-cells = <1>;
  21                         status = "disabled";
  22                 };
  23
  24                 xhci0: usb@1000 {
  25                         compatible = "generic-xhci";
  26                         reg = <0x0 0x00001000 0x0 0x1000>;
  27                         interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
  28                         phys = <&usbphy0 1>, <&usbphy0 0>;
  29                         phy-names = "phy0", "phy1";
  30                         dma-coherent;
  31                         status = "disabled";
  32                 };
  33
  34                 bdc0: usb@2000 {
  35                         compatible = "brcm,bdc-v0.16";
  36                         reg = <0x0 0x00002000 0x0 0x1000>;
  37                         interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
  38                         phys = <&usbphy0 0>, <&usbphy0 1>;
  39                         phy-names = "phy0", "phy1";
  40                         dma-coherent;
  41                         status = "disabled";
  42                 };
  43
  44                 usbphy1: usb-phy@10000 {
  45                         compatible = "brcm,sr-usb-combo-phy";
  46                         reg = <0x0 0x00010000 0x0 0x100>;
  47                         #phy-cells = <1>;
  48                         status = "disabled";
  49                 };
  50
  51                 usbphy2: usb-phy@20000 {
  52                         compatible = "brcm,sr-usb-hs-phy";
  53                         reg = <0x0 0x00020000 0x0 0x100>;
  54                         #phy-cells = <0>;
  55                         status = "disabled";
  56                 };
  57
  58                 xhci1: usb@11000 {
  59                         compatible = "generic-xhci";
  60                         reg = <0x0 0x00011000 0x0 0x1000>;
  61                         interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
  62                         phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
  63                         phy-names = "phy0", "phy1", "phy2";
  64                         dma-coherent;
  65                         status = "disabled";
  66                 };
  67
  68                 bdc1: usb@21000 {
  69                         compatible = "brcm,bdc-v0.16";
  70                         reg = <0x0 0x00021000 0x0 0x1000>;
  71                         interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
  72                         phys = <&usbphy2>;
  73                         phy-names = "phy0";
  74                         dma-coherent;
  75                         status = "disabled";
  76                 };
  77         };