arch/arm/mach-stm32mp/Kconfig

   1 if ARCH_STM32MP
   2
   3 config SPL
   4         select SPL_BOARD_INIT
   5         select SPL_CLK
   6         select SPL_DM
   7         select SPL_DM_SEQ_ALIAS
   8         select SPL_DRIVERS_MISC
   9         select SPL_FRAMEWORK
  10         select SPL_GPIO
  11         select SPL_LIBCOMMON_SUPPORT
  12         select SPL_LIBGENERIC_SUPPORT
  13         select SPL_OF_CONTROL
  14         select SPL_OF_TRANSLATE
  15         select SPL_PINCTRL
  16         select SPL_REGMAP
  17         select SPL_DM_RESET
  18         select SPL_SERIAL
  19         select SPL_SYSCON
  20         select SPL_WATCHDOG if WATCHDOG
  21         imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
  22         imply SPL_BOOTSTAGE if BOOTSTAGE
  23         imply SPL_DISPLAY_PRINT
  24         imply SPL_LIBDISK_SUPPORT
  25         imply SPL_SPI_LOAD if SPL_SPI
  26
  27 config SYS_SOC
  28         default "stm32mp"
  29
  30 config SYS_MALLOC_LEN
  31         default 0x2000000
  32
  33 config ENV_SIZE
  34         default 0x2000
  35
  36 choice
  37         prompt "Select STMicroelectronics STM32MPxxx Soc"
  38         default STM32MP15x
  39
  40 config STM32MP13x
  41         bool "Support STMicroelectronics STM32MP13x Soc"
  42         select ARM_SMCCC
  43         select CPU_V7A
  44         select CPU_V7_HAS_NONSEC
  45         select CPU_V7_HAS_VIRT
  46         select OF_BOARD
  47         select OF_BOARD_SETUP
  48         select PINCTRL_STM32
  49         select STM32_RCC
  50         select STM32_RESET
  51         select STM32_SERIAL
  52         select SYS_ARCH_TIMER
  53         imply CMD_NVEDIT_INFO
  54         help
  55                 support of STMicroelectronics SOC STM32MP13x family
  56                 STMicroelectronics MPU with core ARMv7
  57
  58 config STM32MP15x
  59         bool "Support STMicroelectronics STM32MP15x Soc"
  60         select ARCH_SUPPORT_PSCI
  61         select BINMAN
  62         select CPU_V7A
  63         select CPU_V7_HAS_NONSEC
  64         select CPU_V7_HAS_VIRT
  65         select OF_BOARD if TFABOOT
  66         select OF_BOARD_SETUP
  67         select PINCTRL_STM32
  68         select STM32_RCC
  69         select STM32_RESET
  70         select STM32_SERIAL
  71         select SUPPORT_SPL
  72         select SYS_ARCH_TIMER
  73         imply CMD_NVEDIT_INFO
  74         help
  75                 support of STMicroelectronics SOC STM32MP15x family
  76                 STM32MP157, STM32MP153 or STM32MP151
  77                 STMicroelectronics MPU with core ARMv7
  78                 dual core A7 for STM32MP157/3, monocore for STM32MP151
  79 endchoice
  80
  81 config NR_DRAM_BANKS
  82         default 1
  83
  84 config DDR_CACHEABLE_SIZE
  85         hex "Size of the DDR marked cacheable in pre-reloc stage"
  86         default 0x40000000
  87         help
  88                 Define the size of the DDR marked as cacheable in U-Boot
  89                 pre-reloc stage.
  90                 This option can be useful to avoid speculatif access
  91                 to secured area of DDR used by TF-A or OP-TEE before U-Boot
  92                 initialization.
  93                 The areas marked "no-map" in device tree should be located
  94                 before this limit: STM32_DDR_BASE + DDR_CACHEABLE_SIZE.
  95
  96 config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
  97         hex "Partition on MMC2 to use to load U-Boot from"
  98         depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
  99         default 1
 100         help
 101           Partition on the second MMC to load U-Boot from when the MMC is being
 102           used in raw mode
 103
 104 config STM32_ETZPC
 105         bool "STM32 Extended TrustZone Protection"
 106         depends on STM32MP15x || STM32MP13x
 107         default y
 108         imply BOOTP_SERVERIP
 109         help
 110           Say y to enable STM32 Extended TrustZone Protection
 111
 112 config STM32_ECDSA_VERIFY
 113         bool "STM32 ECDSA verification via the ROM API"
 114         depends on SPL_ECDSA_VERIFY
 115         default y
 116         help
 117           Say y to enable the uclass driver for ECDSA verification using the
 118           ROM API provided on STM32MP.
 119           The ROM API is only available during SPL for now.
 120
 121 config CMD_STM32KEY
 122         bool "command stm32key to fuse public key hash"
 123         help
 124                 fuse public key hash in corresponding fuse used to authenticate
 125                 binary.
 126                 This command is used to evaluate the secure boot on stm32mp SOC,
 127                 it is deactivated by default in real products.
 128
 129 source "arch/arm/mach-stm32mp/Kconfig.13x"
 130 source "arch/arm/mach-stm32mp/Kconfig.15x"
 131
 132 source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
 133 endif