arch/arm/mach-rockchip/rk3399-board-spl.c

   1 /*
   2  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <debug_uart.h>
   9 #include <dm.h>
  10 #include <fdtdec.h>
  11 #include <led.h>
  12 #include <malloc.h>
  13 #include <mmc.h>
  14 #include <ram.h>
  15 #include <spl.h>
  16 #include <asm/gpio.h>
  17 #include <asm/io.h>
  18 #include <asm/arch/clock.h>
  19 #include <asm/arch/hardware.h>
  20 #include <asm/arch/periph.h>
  21 #include <asm/arch/sdram.h>
  22 #include <asm/arch/timer.h>
  23 #include <dm/pinctrl.h>
  24 #include <dm/root.h>
  25 #include <dm/test.h>
  26 #include <dm/util.h>
  27 #include <power/regulator.h>
  28
  29 DECLARE_GLOBAL_DATA_PTR;
  30
  31 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OF_CONTROL)
  32 static int spl_node_to_boot_device(int node)
  33 {
  34         struct udevice *parent;
  35
  36         /*
  37          * This should eventually move into the SPL code, once SPL becomes
  38          * aware of the block-device layer.  Until then (and to avoid unneeded
  39          * delays in getting this feature out, it lives at the board-level).
  40          */
  41         if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
  42                 struct udevice *dev;
  43                 struct blk_desc *desc = NULL;
  44
  45                 for (device_find_first_child(parent, &dev);
  46                      dev;
  47                      device_find_next_child(&dev)) {
  48                         if (device_get_uclass_id(dev) == UCLASS_BLK) {
  49                                 desc = dev_get_uclass_platdata(dev);
  50                                 break;
  51                         }
  52                 }
  53
  54                 if (!desc)
  55                         return -ENOENT;
  56
  57                 switch (desc->devnum) {
  58                 case 0:
  59                         return BOOT_DEVICE_MMC1;
  60                 case 1:
  61                         return BOOT_DEVICE_MMC2;
  62                 default:
  63                         return -ENOSYS;
  64                 }
  65         }
  66
  67         /*
  68          * SPL doesn't differentiate SPI flashes, so we keep the detection
  69          * brief and inaccurate... hopefully, the common SPL layer can be
  70          * extended with awareness of the BLK layer (and matching OF_CONTROL)
  71          * soon.
  72          */
  73         if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
  74                 return BOOT_DEVICE_SPI;
  75
  76         return -1;
  77 }
  78
  79 void board_boot_order(u32 *spl_boot_list)
  80 {
  81         const void *blob = gd->fdt_blob;
  82         int chosen_node = fdt_path_offset(blob, "/chosen");
  83         int idx = 0;
  84         int elem;
  85         int boot_device;
  86         int node;
  87         const char *conf;
  88
  89         if (chosen_node < 0) {
  90                 debug("%s: /chosen not found, using spl_boot_device()\n",
  91                       __func__);
  92                 spl_boot_list[0] = spl_boot_device();
  93                 return;
  94         }
  95
  96         for (elem = 0;
  97              (conf = fdt_stringlist_get(blob, chosen_node,
  98                                         "u-boot,spl-boot-order", elem, NULL));
  99              elem++) {
 100                 /* First check if the list element is an alias */
 101                 const char *alias = fdt_get_alias(blob, conf);
 102                 if (alias)
 103                         conf = alias;
 104
 105                 /* Try to resolve the config item (or alias) as a path */
 106                 node = fdt_path_offset(blob, conf);
 107                 if (node < 0) {
 108                         debug("%s: could not find %s in FDT", __func__, conf);
 109                         continue;
 110                 }
 111
 112                 /* Try to map this back onto SPL boot devices */
 113                 boot_device = spl_node_to_boot_device(node);
 114                 if (boot_device < 0) {
 115                         debug("%s: could not map node @%x to a boot-device\n",
 116                               __func__, node);
 117                         continue;
 118                 }
 119
 120                 spl_boot_list[idx++] = boot_device;
 121         }
 122
 123         /* If we had no matches, fall back to spl_boot_device */
 124         if (idx == 0)
 125                 spl_boot_list[0] = spl_boot_device();
 126 }
 127 #endif
 128
 129 u32 spl_boot_device(void)
 130 {
 131         return BOOT_DEVICE_MMC1;
 132 }
 133
 134 u32 spl_boot_mode(const u32 boot_device)
 135 {
 136         return MMCSD_MODE_RAW;
 137 }
 138
 139 #define TIMER_CHN10_BASE        0xff8680a0
 140 #define TIMER_END_COUNT_L       0x00
 141 #define TIMER_END_COUNT_H       0x04
 142 #define TIMER_INIT_COUNT_L      0x10
 143 #define TIMER_INIT_COUNT_H      0x14
 144 #define TIMER_CONTROL_REG       0x1c
 145
 146 #define TIMER_EN        0x1
 147 #define TIMER_FMODE     (0 << 1)
 148 #define TIMER_RMODE     (1 << 1)
 149
 150 void secure_timer_init(void)
 151 {
 152         writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_L);
 153         writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_H);
 154         writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_L);
 155         writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_H);
 156         writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
 157 }
 158
 159 void board_debug_uart_init(void)
 160 {
 161 #include <asm/arch/grf_rk3399.h>
 162 #define GRF_BASE        0xff770000
 163         struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
 164
 165 #if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
 166         /* Enable early UART0 on the RK3399 */
 167         rk_clrsetreg(&grf->gpio2c_iomux,
 168                      GRF_GPIO2C0_SEL_MASK,
 169                      GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
 170         rk_clrsetreg(&grf->gpio2c_iomux,
 171                      GRF_GPIO2C1_SEL_MASK,
 172                      GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
 173 #else
 174         /* Enable early UART2 channel C on the RK3399 */
 175         rk_clrsetreg(&grf->gpio4c_iomux,
 176                      GRF_GPIO4C3_SEL_MASK,
 177                      GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
 178         rk_clrsetreg(&grf->gpio4c_iomux,
 179                      GRF_GPIO4C4_SEL_MASK,
 180                      GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
 181         /* Set channel C as UART2 input */
 182         rk_clrsetreg(&grf->soc_con7,
 183                      GRF_UART_DBG_SEL_MASK,
 184                      GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
 185 #endif
 186 }
 187
 188 #define GRF_EMMCCORE_CON11 0xff77f02c
 189 #define SGRF_DDR_RGN_CON16 0xff330040
 190 #define SGRF_SLV_SECURE_CON4 0xff33e3d0
 191 void board_init_f(ulong dummy)
 192 {
 193         struct udevice *pinctrl;
 194         struct udevice *dev;
 195         int ret;
 196
 197 #define EARLY_UART
 198 #ifdef EARLY_UART
 199         /*
 200          * Debug UART can be used from here if required:
 201          *
 202          * debug_uart_init();
 203          * printch('a');
 204          * printhex8(0x1234);
 205          * printascii("string");
 206          */
 207         debug_uart_init();
 208         printascii("U-Boot SPL board init");
 209 #endif
 210
 211         /*  Emmc clock generator: disable the clock multipilier */
 212         rk_clrreg(GRF_EMMCCORE_CON11, 0x0ff);
 213
 214         ret = spl_early_init();
 215         if (ret) {
 216                 debug("spl_early_init() failed: %d\n", ret);
 217                 hang();
 218         }
 219
 220         /*
 221          * Disable DDR and SRAM security regions.
 222          *
 223          * As we are entered from the BootROM, the region from
 224          * 0x0 through 0xfffff (i.e. the first MB of memory) will
 225          * be protected. This will cause issues with the DW_MMC
 226          * driver, which tries to DMA from/to the stack (likely)
 227          * located in this range.
 228          */
 229         rk_clrsetreg(SGRF_DDR_RGN_CON16, 0x1FF, 0);
 230         rk_clrreg(SGRF_SLV_SECURE_CON4, 0x2000);
 231
 232         secure_timer_init();
 233
 234         ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
 235         if (ret) {
 236                 debug("Pinctrl init failed: %d\n", ret);
 237                 return;
 238         }
 239
 240         ret = uclass_get_device(UCLASS_RAM, 0, &dev);
 241         if (ret) {
 242                 debug("DRAM init failed: %d\n", ret);
 243                 return;
 244         }
 245 }
 246
 247 void spl_board_init(void)
 248 {
 249         struct udevice *pinctrl;
 250         int ret;
 251
 252         ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
 253         if (ret) {
 254                 debug("%s: Cannot find pinctrl device\n", __func__);
 255                 goto err;
 256         }
 257
 258         /* Enable debug UART */
 259         ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
 260         if (ret) {
 261                 debug("%s: Failed to set up console UART\n", __func__);
 262                 goto err;
 263         }
 264
 265         preloader_console_init();
 266 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
 267         back_to_bootrom();
 268 #endif
 269
 270         return;
 271 err:
 272         printf("spl_board_init: Error %d\n", ret);
 273
 274         /* No way to report error here */
 275         hang();
 276 }
 277
 278 #ifdef CONFIG_SPL_LOAD_FIT
 279 int board_fit_config_name_match(const char *name)
 280 {
 281         /* Just empty function now - can't decide what to choose */
 282         debug("%s: %s\n", __func__, name);
 283
 284         return 0;
 285 }
 286 #endif