arch/arm/mach-omap2/serial.c

   1 /*
   2  * arch/arm/mach-omap2/serial.c
   3  *
   4  * OMAP2 serial support.
   5  *
   6  * Copyright (C) 2005-2008 Nokia Corporation
   7  * Author: Paul Mundt <paul.mundt@nokia.com>
   8  *
   9  * Major rework for PM support by Kevin Hilman
  10  *
  11  * Based off of arch/arm/mach-omap/omap1/serial.c
  12  *
  13  * Copyright (C) 2009 Texas Instruments
  14  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
  15  *
  16  * This file is subject to the terms and conditions of the GNU General Public
  17  * License. See the file "COPYING" in the main directory of this archive
  18  * for more details.
  19  */
  20 #include <linux/kernel.h>
  21 #include <linux/init.h>
  22 #include <linux/clk.h>
  23 #include <linux/io.h>
  24 #include <linux/delay.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/slab.h>
  27 #include <linux/pm_runtime.h>
  28 #include <linux/console.h>
  29 #include <linux/omap-dma.h>
  30 #include <linux/platform_data/serial-omap.h>
  31
  32 #include "common.h"
  33 #include "omap_hwmod.h"
  34 #include "omap_device.h"
  35 #include "omap-pm.h"
  36 #include "soc.h"
  37 #include "prm2xxx_3xxx.h"
  38 #include "pm.h"
  39 #include "cm2xxx_3xxx.h"
  40 #include "prm-regbits-34xx.h"
  41 #include "control.h"
  42 #include "mux.h"
  43 #include "serial.h"
  44
  45 /*
  46  * NOTE: By default the serial auto_suspend timeout is disabled as it causes
  47  * lost characters over the serial ports. This means that the UART clocks will
  48  * stay on until power/autosuspend_delay is set for the uart from sysfs.
  49  * This also causes that any deeper omap sleep states are blocked.
  50  */
  51 #define DEFAULT_AUTOSUSPEND_DELAY       -1
  52
  53 #define MAX_UART_HWMOD_NAME_LEN         16
  54
  55 struct omap_uart_state {
  56         int num;
  57
  58         struct list_head node;
  59         struct omap_hwmod *oh;
  60         struct omap_device_pad default_omap_uart_pads[2];
  61 };
  62
  63 static LIST_HEAD(uart_list);
  64 static u8 num_uarts;
  65 static u8 console_uart_id = -1;
  66 static u8 no_console_suspend;
  67 static u8 uart_debug;
  68
  69 #define DEFAULT_RXDMA_POLLRATE          1       /* RX DMA polling rate (us) */
  70 #define DEFAULT_RXDMA_BUFSIZE           4096    /* RX DMA buffer size */
  71 #define DEFAULT_RXDMA_TIMEOUT           (3 * HZ)/* RX DMA timeout (jiffies) */
  72
  73 static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
  74         {
  75                 .dma_enabled    = false,
  76                 .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE,
  77                 .dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE,
  78                 .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT,
  79                 .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY,
  80         },
  81 };
  82
  83 #ifdef CONFIG_PM
  84 static void omap_uart_enable_wakeup(struct device *dev, bool enable)
  85 {
  86         struct platform_device *pdev = to_platform_device(dev);
  87         struct omap_device *od = to_omap_device(pdev);
  88
  89         if (!od)
  90                 return;
  91
  92         if (enable)
  93                 omap_hwmod_enable_wakeup(od->hwmods[0]);
  94         else
  95                 omap_hwmod_disable_wakeup(od->hwmods[0]);
  96 }
  97
  98 /*
  99  * Errata i291: [UART]:Cannot Acknowledge Idle Requests
 100  * in Smartidle Mode When Configured for DMA Operations.
 101  * WA: configure uart in force idle mode.
 102  */
 103 static void omap_uart_set_noidle(struct device *dev)
 104 {
 105         struct platform_device *pdev = to_platform_device(dev);
 106         struct omap_device *od = to_omap_device(pdev);
 107
 108         omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
 109 }
 110
 111 static void omap_uart_set_smartidle(struct device *dev)
 112 {
 113         struct platform_device *pdev = to_platform_device(dev);
 114         struct omap_device *od = to_omap_device(pdev);
 115         u8 idlemode;
 116
 117         if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
 118                 idlemode = HWMOD_IDLEMODE_SMART_WKUP;
 119         else
 120                 idlemode = HWMOD_IDLEMODE_SMART;
 121
 122         omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
 123 }
 124
 125 #else
 126 static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 127 {}
 128 static void omap_uart_set_noidle(struct device *dev) {}
 129 static void omap_uart_set_smartidle(struct device *dev) {}
 130 #endif /* CONFIG_PM */
 131
 132 #ifdef CONFIG_OMAP_MUX
 133
 134 #define OMAP_UART_DEFAULT_PAD_NAME_LEN  28
 135 static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
 136                 tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
 137
 138 static void  __init
 139 omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
 140                                 struct omap_uart_state *uart)
 141 {
 142         uart->default_omap_uart_pads[0].name = rx_pad_name;
 143         uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
 144                                                         OMAP_DEVICE_PAD_WAKEUP;
 145         uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
 146                                                         OMAP_MUX_MODE0;
 147         uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
 148         uart->default_omap_uart_pads[1].name = tx_pad_name;
 149         uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
 150                                                         OMAP_MUX_MODE0;
 151         bdata->pads = uart->default_omap_uart_pads;
 152         bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
 153 }
 154
 155 static void  __init omap_serial_check_wakeup(struct omap_board_data *bdata,
 156                                                 struct omap_uart_state *uart)
 157 {
 158         struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
 159         struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
 160         char *rx_fmt, *tx_fmt;
 161         int uart_nr = bdata->id + 1;
 162
 163         if (bdata->id != 2) {
 164                 rx_fmt = "uart%d_rx.uart%d_rx";
 165                 tx_fmt = "uart%d_tx.uart%d_tx";
 166         } else {
 167                 rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
 168                 tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
 169         }
 170
 171         snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
 172                         uart_nr, uart_nr);
 173         snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
 174                         uart_nr, uart_nr);
 175
 176         if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
 177                         omap_mux_get_by_name
 178                                 (tx_pad_name, &tx_partition, &tx_mux) >= 0) {
 179                 u16 tx_mode, rx_mode;
 180
 181                 tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
 182                 rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
 183
 184                 /*
 185                  * Check if uart is used in default tx/rx mode i.e. in mux mode0
 186                  * if yes then configure rx pin for wake up capability
 187                  */
 188                 if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
 189                         omap_serial_fill_uart_tx_rx_pads(bdata, uart);
 190         }
 191 }
 192 #else
 193 static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
 194                 struct omap_uart_state *uart)
 195 {
 196 }
 197 #endif
 198
 199 static char *cmdline_find_option(char *str)
 200 {
 201         extern char *saved_command_line;
 202
 203         return strstr(saved_command_line, str);
 204 }
 205
 206 static int __init omap_serial_early_init(void)
 207 {
 208         do {
 209                 char oh_name[MAX_UART_HWMOD_NAME_LEN];
 210                 struct omap_hwmod *oh;
 211                 struct omap_uart_state *uart;
 212                 char uart_name[MAX_UART_HWMOD_NAME_LEN];
 213
 214                 snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
 215                          "uart%d", num_uarts + 1);
 216                 oh = omap_hwmod_lookup(oh_name);
 217                 if (!oh)
 218                         break;
 219
 220                 uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
 221                 if (WARN_ON(!uart))
 222                         return -ENODEV;
 223
 224                 uart->oh = oh;
 225                 uart->num = num_uarts++;
 226                 list_add_tail(&uart->node, &uart_list);
 227                 snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN,
 228                                 "%s%d", OMAP_SERIAL_NAME, uart->num);
 229
 230                 if (cmdline_find_option(uart_name)) {
 231                         console_uart_id = uart->num;
 232
 233                         if (console_loglevel >= 10) {
 234                                 uart_debug = true;
 235                                 pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
 236                                         uart_name, uart->num);
 237                         }
 238
 239                         if (cmdline_find_option("no_console_suspend"))
 240                                 no_console_suspend = true;
 241
 242                         /*
 243                          * omap-uart can be used for earlyprintk logs
 244                          * So if omap-uart is used as console then prevent
 245                          * uart reset and idle to get logs from omap-uart
 246                          * until uart console driver is available to take
 247                          * care for console messages.
 248                          * Idling or resetting omap-uart while printing logs
 249                          * early boot logs can stall the boot-up.
 250                          */
 251                         oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
 252                 }
 253         } while (1);
 254
 255         return 0;
 256 }
 257 omap_core_initcall(omap_serial_early_init);
 258
 259 /**
 260  * omap_serial_init_port() - initialize single serial port
 261  * @bdata: port specific board data pointer
 262  * @info: platform specific data pointer
 263  *
 264  * This function initialies serial driver for given port only.
 265  * Platforms can call this function instead of omap_serial_init()
 266  * if they don't plan to use all available UARTs as serial ports.
 267  *
 268  * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
 269  * use only one of the two.
 270  */
 271 void __init omap_serial_init_port(struct omap_board_data *bdata,
 272                         struct omap_uart_port_info *info)
 273 {
 274         struct omap_uart_state *uart;
 275         struct omap_hwmod *oh;
 276         struct platform_device *pdev;
 277         void *pdata = NULL;
 278         u32 pdata_size = 0;
 279         char *name;
 280         struct omap_uart_port_info omap_up;
 281
 282         if (WARN_ON(!bdata))
 283                 return;
 284         if (WARN_ON(bdata->id < 0))
 285                 return;
 286         if (WARN_ON(bdata->id >= num_uarts))
 287                 return;
 288
 289         list_for_each_entry(uart, &uart_list, node)
 290                 if (bdata->id == uart->num)
 291                         break;
 292         if (!info)
 293                 info = omap_serial_default_info;
 294
 295         oh = uart->oh;
 296         name = DRIVER_NAME;
 297
 298         omap_up.dma_enabled = info->dma_enabled;
 299         omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
 300         omap_up.flags = UPF_BOOT_AUTOCONF;
 301         omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
 302         omap_up.set_forceidle = omap_uart_set_smartidle;
 303         omap_up.set_noidle = omap_uart_set_noidle;
 304         omap_up.enable_wakeup = omap_uart_enable_wakeup;
 305         omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
 306         omap_up.dma_rx_timeout = info->dma_rx_timeout;
 307         omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
 308         omap_up.autosuspend_timeout = info->autosuspend_timeout;
 309         omap_up.DTR_gpio = info->DTR_gpio;
 310         omap_up.DTR_inverted = info->DTR_inverted;
 311         omap_up.DTR_present = info->DTR_present;
 312
 313         pdata = &omap_up;
 314         pdata_size = sizeof(struct omap_uart_port_info);
 315
 316         if (WARN_ON(!oh))
 317                 return;
 318
 319         pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size);
 320         if (IS_ERR(pdev)) {
 321                 WARN(1, "Could not build omap_device for %s: %s.\n", name,
 322                      oh->name);
 323                 return;
 324         }
 325
 326         if ((console_uart_id == bdata->id) && no_console_suspend)
 327                 omap_device_disable_idle_on_suspend(pdev);
 328
 329         oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
 330
 331         if (console_uart_id == bdata->id) {
 332                 omap_device_enable(pdev);
 333                 pm_runtime_set_active(&pdev->dev);
 334         }
 335
 336         oh->dev_attr = uart;
 337
 338         if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
 339                         && !uart_debug)
 340                 device_init_wakeup(&pdev->dev, true);
 341 }
 342
 343 /**
 344  * omap_serial_board_init() - initialize all supported serial ports
 345  * @info: platform specific data pointer
 346  *
 347  * Initializes all available UARTs as serial ports. Platforms
 348  * can call this function when they want to have default behaviour
 349  * for serial ports (e.g initialize them all as serial ports).
 350  */
 351 void __init omap_serial_board_init(struct omap_uart_port_info *info)
 352 {
 353         struct omap_uart_state *uart;
 354         struct omap_board_data bdata;
 355
 356         list_for_each_entry(uart, &uart_list, node) {
 357                 bdata.id = uart->num;
 358                 bdata.flags = 0;
 359                 bdata.pads = NULL;
 360                 bdata.pads_cnt = 0;
 361
 362                 omap_serial_check_wakeup(&bdata, uart);
 363
 364                 if (!info)
 365                         omap_serial_init_port(&bdata, NULL);
 366                 else
 367                         omap_serial_init_port(&bdata, &info[uart->num]);
 368         }
 369 }
 370
 371 /**
 372  * omap_serial_init() - initialize all supported serial ports
 373  *
 374  * Initializes all available UARTs.
 375  * Platforms can call this function when they want to have default behaviour
 376  * for serial ports (e.g initialize them all as serial ports).
 377  */
 378 void __init omap_serial_init(void)
 379 {
 380         omap_serial_board_init(NULL);
 381 }