arch/arm/mach-omap2/omap5/hwinit.c

   1 /*
   2  *
   3  * Functions for omap5 based boards.
   4  *
   5  * (C) Copyright 2011
   6  * Texas Instruments, <www.ti.com>
   7  *
   8  * Author :
   9  *      Aneesh V        <aneesh@ti.com>
  10  *      Steve Sakoman   <steve@sakoman.com>
  11  *      Sricharan       <r.sricharan@ti.com>
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15 #include <common.h>
  16 #include <palmas.h>
  17 #include <asm/armv7.h>
  18 #include <asm/arch/cpu.h>
  19 #include <asm/arch/sys_proto.h>
  20 #include <asm/arch/clock.h>
  21 #include <linux/sizes.h>
  22 #include <asm/utils.h>
  23 #include <asm/arch/gpio.h>
  24 #include <asm/emif.h>
  25 #include <asm/omap_common.h>
  26
  27 DECLARE_GLOBAL_DATA_PTR;
  28
  29 u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
  30
  31 #ifndef CONFIG_DM_GPIO
  32 static struct gpio_bank gpio_bank_54xx[8] = {
  33         { (void *)OMAP54XX_GPIO1_BASE },
  34         { (void *)OMAP54XX_GPIO2_BASE },
  35         { (void *)OMAP54XX_GPIO3_BASE },
  36         { (void *)OMAP54XX_GPIO4_BASE },
  37         { (void *)OMAP54XX_GPIO5_BASE },
  38         { (void *)OMAP54XX_GPIO6_BASE },
  39         { (void *)OMAP54XX_GPIO7_BASE },
  40         { (void *)OMAP54XX_GPIO8_BASE },
  41 };
  42
  43 const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
  44 #endif
  45
  46 void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size)
  47 {
  48         int i;
  49         struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
  50
  51         for (i = 0; i < size; i++, pad++)
  52                 writel(pad->val, base + pad->offset);
  53 }
  54
  55 #ifdef CONFIG_SPL_BUILD
  56 /* LPDDR2 specific IO settings */
  57 static void io_settings_lpddr2(void)
  58 {
  59         const struct ctrl_ioregs *ioregs;
  60
  61         get_ioregs(&ioregs);
  62         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
  63         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
  64         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
  65         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
  66         writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
  67         writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
  68         writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
  69         writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
  70         writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
  71 }
  72
  73 /* DDR3 specific IO settings */
  74 static void io_settings_ddr3(void)
  75 {
  76         u32 io_settings = 0;
  77         const struct ctrl_ioregs *ioregs;
  78
  79         get_ioregs(&ioregs);
  80         writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0);
  81         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
  82         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
  83
  84         writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0);
  85         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
  86         writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
  87
  88         writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
  89         writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
  90
  91         if (!is_dra7xx()) {
  92                 writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
  93                 writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
  94         }
  95
  96         /* omap5432 does not use lpddr2 */
  97         writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
  98
  99         writel(ioregs->ctrl_emif_sdram_config_ext,
 100                (*ctrl)->control_emif1_sdram_config_ext);
 101         if (!is_dra72x())
 102                 writel(ioregs->ctrl_emif_sdram_config_ext,
 103                        (*ctrl)->control_emif2_sdram_config_ext);
 104
 105         if (is_omap54xx()) {
 106                 /* Disable DLL select */
 107                 io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
 108                                                         & 0xFFEFFFFF);
 109                 writel(io_settings,
 110                         (*ctrl)->control_port_emif1_sdram_config);
 111
 112                 io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
 113                                                         & 0xFFEFFFFF);
 114                 writel(io_settings,
 115                         (*ctrl)->control_port_emif2_sdram_config);
 116         } else {
 117                 writel(ioregs->ctrl_ddr_ctrl_ext_0,
 118                                 (*ctrl)->control_ddr_control_ext_0);
 119         }
 120 }
 121
 122 /*
 123  * Some tuning of IOs for optimal power and performance
 124  */
 125 void do_io_settings(void)
 126 {
 127         u32 io_settings = 0, mask = 0;
 128         struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
 129
 130         /* Impedance settings EMMC, C2C 1,2, hsi2 */
 131         mask = (ds_mask << 2) | (ds_mask << 8) |
 132                 (ds_mask << 16) | (ds_mask << 18);
 133         io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
 134                                 (~mask);
 135         io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
 136                         (ds_45_ohm << 18) | (ds_60_ohm << 2);
 137         writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
 138
 139         /* Impedance settings Mcspi2 */
 140         mask = (ds_mask << 30);
 141         io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
 142                         (~mask);
 143         io_settings |= (ds_60_ohm << 30);
 144         writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
 145
 146         /* Impedance settings C2C 3,4 */
 147         mask = (ds_mask << 14) | (ds_mask << 16);
 148         io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
 149                         (~mask);
 150         io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
 151         writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
 152
 153         /* Slew rate settings EMMC, C2C 1,2 */
 154         mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
 155         io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
 156                         (~mask);
 157         io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
 158         writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
 159
 160         /* Slew rate settings hsi2, Mcspi2 */
 161         mask = (sc_mask << 24) | (sc_mask << 28);
 162         io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
 163                         (~mask);
 164         io_settings |= (sc_fast << 28) | (sc_fast << 24);
 165         writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
 166
 167         /* Slew rate settings C2C 3,4 */
 168         mask = (sc_mask << 16) | (sc_mask << 18);
 169         io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
 170                         (~mask);
 171         io_settings |= (sc_na << 16) | (sc_na << 18);
 172         writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
 173
 174         /* impedance and slew rate settings for usb */
 175         mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
 176                 (usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
 177         io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
 178                         (~mask);
 179         io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
 180                        (ds_60_ohm << 23) | (sc_fast << 20) |
 181                        (sc_fast << 17) | (sc_fast << 14);
 182         writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
 183
 184         if (emif_sdram_type(emif->emif_sdram_config) == EMIF_SDRAM_TYPE_LPDDR2)
 185                 io_settings_lpddr2();
 186         else
 187                 io_settings_ddr3();
 188 }
 189
 190 static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
 191         {0x45, 0x1},    /* 12 MHz   */
 192         {-1, -1},       /* 13 MHz   */
 193         {0x63, 0x2},    /* 16.8 MHz */
 194         {0x57, 0x2},    /* 19.2 MHz */
 195         {0x20, 0x1},    /* 26 MHz   */
 196         {-1, -1},       /* 27 MHz   */
 197         {0x41, 0x3}     /* 38.4 MHz */
 198 };
 199
 200 void srcomp_enable(void)
 201 {
 202         u32 srcomp_value, mul_factor, div_factor, clk_val, i;
 203         u32 sysclk_ind  = get_sys_clk_index();
 204         u32 omap_rev    = omap_revision();
 205
 206         if (!is_omap54xx())
 207                 return;
 208
 209         mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
 210         div_factor = srcomp_parameters[sysclk_ind].divide_factor;
 211
 212         for (i = 0; i < 4; i++) {
 213                 srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4);
 214                 srcomp_value &=
 215                         ~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK);
 216                 srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
 217                         (div_factor << DIVIDE_FACTOR_XS_SHIFT);
 218                 writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4);
 219         }
 220
 221         if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) {
 222                 clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
 223                 clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
 224                 writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
 225
 226                 for (i = 0; i < 4; i++) {
 227                         srcomp_value =
 228                                 readl((*ctrl)->control_srcomp_north_side + i*4);
 229                         srcomp_value &= ~PWRDWN_XS_MASK;
 230                         writel(srcomp_value,
 231                                (*ctrl)->control_srcomp_north_side + i*4);
 232
 233                         while (((readl((*ctrl)->control_srcomp_north_side + i*4)
 234                                 & SRCODE_READ_XS_MASK) >>
 235                                 SRCODE_READ_XS_SHIFT) == 0)
 236                                 ;
 237
 238                         srcomp_value =
 239                                 readl((*ctrl)->control_srcomp_north_side + i*4);
 240                         srcomp_value &= ~OVERRIDE_XS_MASK;
 241                         writel(srcomp_value,
 242                                (*ctrl)->control_srcomp_north_side + i*4);
 243                 }
 244         } else {
 245                 srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup);
 246                 srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK |
 247                                   DIVIDE_FACTOR_XS_MASK);
 248                 srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
 249                                 (div_factor << DIVIDE_FACTOR_XS_SHIFT);
 250                 writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
 251
 252                 for (i = 0; i < 4; i++) {
 253                         srcomp_value =
 254                                 readl((*ctrl)->control_srcomp_north_side + i*4);
 255                         srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
 256                         writel(srcomp_value,
 257                                (*ctrl)->control_srcomp_north_side + i*4);
 258
 259                         srcomp_value =
 260                                 readl((*ctrl)->control_srcomp_north_side + i*4);
 261                         srcomp_value &= ~OVERRIDE_XS_MASK;
 262                         writel(srcomp_value,
 263                                (*ctrl)->control_srcomp_north_side + i*4);
 264                 }
 265
 266                 srcomp_value =
 267                         readl((*ctrl)->control_srcomp_east_side_wkup);
 268                 srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
 269                 writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
 270
 271                 srcomp_value =
 272                         readl((*ctrl)->control_srcomp_east_side_wkup);
 273                 srcomp_value &= ~OVERRIDE_XS_MASK;
 274                 writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
 275
 276                 clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
 277                 clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
 278                 writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
 279
 280                 clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl);
 281                 clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
 282                 writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl);
 283
 284                 for (i = 0; i < 4; i++) {
 285                         while (((readl((*ctrl)->control_srcomp_north_side + i*4)
 286                                 & SRCODE_READ_XS_MASK) >>
 287                                 SRCODE_READ_XS_SHIFT) == 0)
 288                                 ;
 289
 290                         srcomp_value =
 291                                 readl((*ctrl)->control_srcomp_north_side + i*4);
 292                         srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
 293                         writel(srcomp_value,
 294                                (*ctrl)->control_srcomp_north_side + i*4);
 295                 }
 296
 297                 while (((readl((*ctrl)->control_srcomp_east_side_wkup) &
 298                         SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0)
 299                         ;
 300
 301                 srcomp_value =
 302                         readl((*ctrl)->control_srcomp_east_side_wkup);
 303                 srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
 304                 writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
 305         }
 306 }
 307 #endif
 308
 309 void config_data_eye_leveling_samples(u32 emif_base)
 310 {
 311         const struct ctrl_ioregs *ioregs;
 312
 313         get_ioregs(&ioregs);
 314
 315         /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
 316         if (emif_base == EMIF1_BASE)
 317                 writel(ioregs->ctrl_emif_sdram_config_ext_final,
 318                        (*ctrl)->control_emif1_sdram_config_ext);
 319         else if (emif_base == EMIF2_BASE)
 320                 writel(ioregs->ctrl_emif_sdram_config_ext_final,
 321                        (*ctrl)->control_emif2_sdram_config_ext);
 322 }
 323
 324 void init_cpu_configuration(void)
 325 {
 326         u32 l2actlr;
 327
 328         asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r"(l2actlr));
 329         /*
 330          * L2ACTLR: Ensure to enable the following:
 331          * 3: Disable clean/evict push to external
 332          * 4: Disable WriteUnique and WriteLineUnique transactions from master
 333          * 8: Disable DVM/CMO message broadcast
 334          */
 335         l2actlr |= 0x118;
 336         omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2actlr);
 337 }
 338
 339 void init_omap_revision(void)
 340 {
 341         /*
 342          * For some of the ES2/ES1 boards ID_CODE is not reliable:
 343          * Also, ES1 and ES2 have different ARM revisions
 344          * So use ARM revision for identification
 345          */
 346         unsigned int rev = cortex_rev();
 347
 348         switch (readl(CONTROL_ID_CODE)) {
 349         case OMAP5430_CONTROL_ID_CODE_ES1_0:
 350                 *omap_si_rev = OMAP5430_ES1_0;
 351                 if (rev == MIDR_CORTEX_A15_R2P2)
 352                         *omap_si_rev = OMAP5430_ES2_0;
 353                 break;
 354         case OMAP5432_CONTROL_ID_CODE_ES1_0:
 355                 *omap_si_rev = OMAP5432_ES1_0;
 356                 if (rev == MIDR_CORTEX_A15_R2P2)
 357                         *omap_si_rev = OMAP5432_ES2_0;
 358                 break;
 359         case OMAP5430_CONTROL_ID_CODE_ES2_0:
 360                 *omap_si_rev = OMAP5430_ES2_0;
 361                 break;
 362         case OMAP5432_CONTROL_ID_CODE_ES2_0:
 363                 *omap_si_rev = OMAP5432_ES2_0;
 364                 break;
 365         case DRA752_CONTROL_ID_CODE_ES1_0:
 366                 *omap_si_rev = DRA752_ES1_0;
 367                 break;
 368         case DRA752_CONTROL_ID_CODE_ES1_1:
 369                 *omap_si_rev = DRA752_ES1_1;
 370                 break;
 371         case DRA752_CONTROL_ID_CODE_ES2_0:
 372                 *omap_si_rev = DRA752_ES2_0;
 373                 break;
 374         case DRA722_CONTROL_ID_CODE_ES1_0:
 375                 *omap_si_rev = DRA722_ES1_0;
 376                 break;
 377         case DRA722_CONTROL_ID_CODE_ES2_0:
 378                 *omap_si_rev = DRA722_ES2_0;
 379                 break;
 380         default:
 381                 *omap_si_rev = OMAP5430_SILICON_ID_INVALID;
 382         }
 383         init_cpu_configuration();
 384 }
 385
 386 void omap_die_id(unsigned int *die_id)
 387 {
 388         die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0);
 389         die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1);
 390         die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2);
 391         die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3);
 392 }
 393
 394 void reset_cpu(ulong ignored)
 395 {
 396         u32 omap_rev = omap_revision();
 397
 398         /*
 399          * WARM reset is not functional in case of OMAP5430 ES1.0 soc.
 400          * So use cold reset in case instead.
 401          */
 402         if (omap_rev == OMAP5430_ES1_0)
 403                 writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl);
 404         else
 405                 writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl);
 406 }
 407
 408 u32 warm_reset(void)
 409 {
 410         return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK;
 411 }
 412
 413 void setup_warmreset_time(void)
 414 {
 415         u32 rst_time, rst_val;
 416
 417 #ifndef CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC
 418         rst_time = CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC;
 419 #else
 420         rst_time = CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC;
 421 #endif
 422         rst_time = usec_to_32k(rst_time) << RSTTIME1_SHIFT;
 423
 424         if (rst_time > RSTTIME1_MASK)
 425                 rst_time = RSTTIME1_MASK;
 426
 427         rst_val = readl((*prcm)->prm_rsttime) & ~RSTTIME1_MASK;
 428         rst_val |= rst_time;
 429         writel(rst_val, (*prcm)->prm_rsttime);
 430 }
 431
 432 void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
 433                                  u32 cpu_rev_comb, u32 cpu_variant,
 434                                  u32 cpu_rev)
 435 {
 436         omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2auxctrl);
 437 }
 438
 439 void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
 440                           u32 cpu_variant, u32 cpu_rev)
 441 {
 442
 443 #ifdef CONFIG_ARM_ERRATA_801819
 444         /*
 445          * DRA72x processors are uniprocessors and DONOT have
 446          * ACP (Accelerator Coherency Port) hooked to ACE (AXI Coherency
 447          * Extensions) Hence the erratum workaround is not applicable for
 448          * DRA72x processors.
 449          */
 450         if (is_dra72x())
 451                 acr &= ~((0x3 << 23) | (0x3 << 25));
 452 #endif
 453         omap_smc1(OMAP5_SERVICE_ACR_SET, acr);
 454 }
 455
 456 #if defined(CONFIG_PALMAS_POWER)
 457 void vmmc_pbias_config(uint voltage)
 458 {
 459         u32 value = 0;
 460         struct vcores_data const *vcores = *omap_vcores;
 461
 462         value = readl((*ctrl)->control_pbias);
 463         value &= ~SDCARD_PWRDNZ;
 464         writel(value, (*ctrl)->control_pbias);
 465         udelay(10); /* wait 10 us */
 466         value &= ~SDCARD_BIAS_PWRDNZ;
 467         writel(value, (*ctrl)->control_pbias);
 468
 469         if (vcores->core.pmic->i2c_slave_addr == 0x60) {
 470                 if (voltage == LDO_VOLT_3V0)
 471                         voltage = 0x19;
 472                 else if (voltage == LDO_VOLT_1V8)
 473                         voltage = 0xa;
 474                 lp873x_mmc1_poweron_ldo(voltage);
 475         } else {
 476                 palmas_mmc1_poweron_ldo(voltage);
 477         }
 478
 479         value = readl((*ctrl)->control_pbias);
 480         value |= SDCARD_BIAS_PWRDNZ;
 481         writel(value, (*ctrl)->control_pbias);
 482         udelay(150); /* wait 150 us */
 483         value |= SDCARD_PWRDNZ;
 484         writel(value, (*ctrl)->control_pbias);
 485         udelay(150); /* wait 150 us */
 486 }
 487 #endif