arch/arm/mach-omap2/irq.c

   1 /*
   2  * linux/arch/arm/mach-omap2/irq.c
   3  *
   4  * Interrupt handler for OMAP2 boards.
   5  *
   6  * Copyright (C) 2005 Nokia Corporation
   7  * Author: Paul Mundt <paul.mundt@nokia.com>
   8  *
   9  * This file is subject to the terms and conditions of the GNU General Public
  10  * License. See the file "COPYING" in the main directory of this archive
  11  * for more details.
  12  */
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/io.h>
  17
  18 #include <asm/exception.h>
  19 #include <asm/mach/irq.h>
  20
  21 #include <mach/hardware.h>
  22
  23 #include "iomap.h"
  24
  25 /* selected INTC register offsets */
  26
  27 #define INTC_REVISION           0x0000
  28 #define INTC_SYSCONFIG          0x0010
  29 #define INTC_SYSSTATUS          0x0014
  30 #define INTC_SIR                0x0040
  31 #define INTC_CONTROL            0x0048
  32 #define INTC_PROTECTION         0x004C
  33 #define INTC_IDLE               0x0050
  34 #define INTC_THRESHOLD          0x0068
  35 #define INTC_MIR0               0x0084
  36 #define INTC_MIR_CLEAR0         0x0088
  37 #define INTC_MIR_SET0           0x008c
  38 #define INTC_PENDING_IRQ0       0x0098
  39 /* Number of IRQ state bits in each MIR register */
  40 #define IRQ_BITS_PER_REG        32
  41
  42 #define OMAP2_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
  43 #define OMAP3_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
  44 #define INTCPS_SIR_IRQ_OFFSET   0x0040  /* omap2/3 active interrupt offset */
  45 #define ACTIVEIRQ_MASK          0x7f    /* omap2/3 active interrupt bits */
  46
  47 /*
  48  * OMAP2 has a number of different interrupt controllers, each interrupt
  49  * controller is identified as its own "bank". Register definitions are
  50  * fairly consistent for each bank, but not all registers are implemented
  51  * for each bank.. when in doubt, consult the TRM.
  52  */
  53 static struct omap_irq_bank {
  54         void __iomem *base_reg;
  55         unsigned int nr_irqs;
  56 } __attribute__ ((aligned(4))) irq_banks[] = {
  57         {
  58                 /* MPU INTC */
  59                 .nr_irqs        = 96,
  60         },
  61 };
  62
  63 /* Structure to save interrupt controller context */
  64 struct omap3_intc_regs {
  65         u32 sysconfig;
  66         u32 protection;
  67         u32 idle;
  68         u32 threshold;
  69         u32 ilr[INTCPS_NR_IRQS];
  70         u32 mir[INTCPS_NR_MIR_REGS];
  71 };
  72
  73 /* INTC bank register get/set */
  74
  75 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
  76 {
  77         __raw_writel(val, bank->base_reg + reg);
  78 }
  79
  80 static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
  81 {
  82         return __raw_readl(bank->base_reg + reg);
  83 }
  84
  85 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
  86 static void omap_ack_irq(struct irq_data *d)
  87 {
  88         intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
  89 }
  90
  91 static void omap_mask_ack_irq(struct irq_data *d)
  92 {
  93         irq_gc_mask_disable_reg(d);
  94         omap_ack_irq(d);
  95 }
  96
  97 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
  98 {
  99         unsigned long tmp;
 100
 101         tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
 102         printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
 103                          "(revision %ld.%ld) with %d interrupts\n",
 104                          bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
 105
 106         tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
 107         tmp |= 1 << 1;  /* soft reset */
 108         intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
 109
 110         while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
 111                 /* Wait for reset to complete */;
 112
 113         /* Enable autoidle */
 114         intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 115 }
 116
 117 int omap_irq_pending(void)
 118 {
 119         int i;
 120
 121         for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
 122                 struct omap_irq_bank *bank = irq_banks + i;
 123                 int irq;
 124
 125                 for (irq = 0; irq < bank->nr_irqs; irq += 32)
 126                         if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
 127                                                ((irq >> 5) << 5)))
 128                                 return 1;
 129         }
 130         return 0;
 131 }
 132
 133 static __init void
 134 omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 135 {
 136         struct irq_chip_generic *gc;
 137         struct irq_chip_type *ct;
 138
 139         gc = irq_alloc_generic_chip("INTC", 1, irq_start, base,
 140                                         handle_level_irq);
 141         ct = gc->chip_types;
 142         ct->chip.irq_ack = omap_mask_ack_irq;
 143         ct->chip.irq_mask = irq_gc_mask_disable_reg;
 144         ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
 145
 146         ct->regs.ack = INTC_CONTROL;
 147         ct->regs.enable = INTC_MIR_CLEAR0;
 148         ct->regs.disable = INTC_MIR_SET0;
 149         irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
 150                                 IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 151 }
 152
 153 static void __init omap_init_irq(u32 base, int nr_irqs)
 154 {
 155         void __iomem *omap_irq_base;
 156         unsigned long nr_of_irqs = 0;
 157         unsigned int nr_banks = 0;
 158         int i, j;
 159
 160         omap_irq_base = ioremap(base, SZ_4K);
 161         if (WARN_ON(!omap_irq_base))
 162                 return;
 163
 164         for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
 165                 struct omap_irq_bank *bank = irq_banks + i;
 166
 167                 bank->nr_irqs = nr_irqs;
 168
 169                 /* Static mapping, never released */
 170                 bank->base_reg = ioremap(base, SZ_4K);
 171                 if (!bank->base_reg) {
 172                         printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
 173                         continue;
 174                 }
 175
 176                 omap_irq_bank_init_one(bank);
 177
 178                 for (j = 0; j < bank->nr_irqs; j += 32)
 179                         omap_alloc_gc(bank->base_reg + j, j, 32);
 180
 181                 nr_of_irqs += bank->nr_irqs;
 182                 nr_banks++;
 183         }
 184
 185         printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
 186                nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
 187 }
 188
 189 void __init omap2_init_irq(void)
 190 {
 191         omap_init_irq(OMAP24XX_IC_BASE, 96);
 192 }
 193
 194 void __init omap3_init_irq(void)
 195 {
 196         omap_init_irq(OMAP34XX_IC_BASE, 96);
 197 }
 198
 199 void __init ti81xx_init_irq(void)
 200 {
 201         omap_init_irq(OMAP34XX_IC_BASE, 128);
 202 }
 203
 204 static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
 205 {
 206         u32 irqnr;
 207
 208         do {
 209                 irqnr = readl_relaxed(base_addr + 0x98);
 210                 if (irqnr)
 211                         goto out;
 212
 213                 irqnr = readl_relaxed(base_addr + 0xb8);
 214                 if (irqnr)
 215                         goto out;
 216
 217                 irqnr = readl_relaxed(base_addr + 0xd8);
 218 #ifdef CONFIG_SOC_OMAPTI816X
 219                 if (irqnr)
 220                         goto out;
 221                 irqnr = readl_relaxed(base_addr + 0xf8);
 222 #endif
 223
 224 out:
 225                 if (!irqnr)
 226                         break;
 227
 228                 irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
 229                 irqnr &= ACTIVEIRQ_MASK;
 230
 231                 if (irqnr)
 232                         handle_IRQ(irqnr, regs);
 233         } while (irqnr);
 234 }
 235
 236 asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
 237 {
 238         void __iomem *base_addr = OMAP2_IRQ_BASE;
 239         omap_intc_handle_irq(base_addr, regs);
 240 }
 241
 242 #ifdef CONFIG_ARCH_OMAP3
 243 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 244
 245 void omap_intc_save_context(void)
 246 {
 247         int ind = 0, i = 0;
 248         for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
 249                 struct omap_irq_bank *bank = irq_banks + ind;
 250                 intc_context[ind].sysconfig =
 251                         intc_bank_read_reg(bank, INTC_SYSCONFIG);
 252                 intc_context[ind].protection =
 253                         intc_bank_read_reg(bank, INTC_PROTECTION);
 254                 intc_context[ind].idle =
 255                         intc_bank_read_reg(bank, INTC_IDLE);
 256                 intc_context[ind].threshold =
 257                         intc_bank_read_reg(bank, INTC_THRESHOLD);
 258                 for (i = 0; i < INTCPS_NR_IRQS; i++)
 259                         intc_context[ind].ilr[i] =
 260                                 intc_bank_read_reg(bank, (0x100 + 0x4*i));
 261                 for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
 262                         intc_context[ind].mir[i] =
 263                                 intc_bank_read_reg(&irq_banks[0], INTC_MIR0 +
 264                                 (0x20 * i));
 265         }
 266 }
 267
 268 void omap_intc_restore_context(void)
 269 {
 270         int ind = 0, i = 0;
 271
 272         for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
 273                 struct omap_irq_bank *bank = irq_banks + ind;
 274                 intc_bank_write_reg(intc_context[ind].sysconfig,
 275                                         bank, INTC_SYSCONFIG);
 276                 intc_bank_write_reg(intc_context[ind].sysconfig,
 277                                         bank, INTC_SYSCONFIG);
 278                 intc_bank_write_reg(intc_context[ind].protection,
 279                                         bank, INTC_PROTECTION);
 280                 intc_bank_write_reg(intc_context[ind].idle,
 281                                         bank, INTC_IDLE);
 282                 intc_bank_write_reg(intc_context[ind].threshold,
 283                                         bank, INTC_THRESHOLD);
 284                 for (i = 0; i < INTCPS_NR_IRQS; i++)
 285                         intc_bank_write_reg(intc_context[ind].ilr[i],
 286                                 bank, (0x100 + 0x4*i));
 287                 for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
 288                         intc_bank_write_reg(intc_context[ind].mir[i],
 289                                  &irq_banks[0], INTC_MIR0 + (0x20 * i));
 290         }
 291         /* MIRs are saved and restore with other PRCM registers */
 292 }
 293
 294 void omap3_intc_suspend(void)
 295 {
 296         /* A pending interrupt would prevent OMAP from entering suspend */
 297         omap_ack_irq(0);
 298 }
 299
 300 void omap3_intc_prepare_idle(void)
 301 {
 302         /*
 303          * Disable autoidle as it can stall interrupt controller,
 304          * cf. errata ID i540 for 3430 (all revisions up to 3.1.x)
 305          */
 306         intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
 307 }
 308
 309 void omap3_intc_resume_idle(void)
 310 {
 311         /* Re-enable autoidle */
 312         intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
 313 }
 314
 315 asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs)
 316 {
 317         void __iomem *base_addr = OMAP3_IRQ_BASE;
 318         omap_intc_handle_irq(base_addr, regs);
 319 }
 320 #endif /* CONFIG_ARCH_OMAP3 */