3 * Common functions for OMAP4/5 based boards
6 * Texas Instruments, <www.ti.com>
9 * Aneesh V <aneesh@ti.com>
10 * Steve Sakoman <steve@sakoman.com>
12 * SPDX-License-Identifier: GPL-2.0+
15 #include <debug_uart.h>
17 #include <asm/arch/sys_proto.h>
18 #include <linux/sizes.h>
20 #include <asm/omap_common.h>
21 #include <linux/compiler.h>
22 #include <asm/system.h>
24 DECLARE_GLOBAL_DATA_PTR;
26 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
29 struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
31 for (i = 0; i < size; i++, pad++)
32 writew(pad->val, base + pad->offset);
35 static void set_mux_conf_regs(void)
37 switch (omap_hw_init_context()) {
38 case OMAP_INIT_CONTEXT_SPL:
41 case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
43 case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
44 case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
55 /* Read Main ID Register (MIDR) */
56 asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
61 static void omap_rev_string(void)
63 u32 omap_rev = omap_revision();
64 u32 soc_variant = (omap_rev & 0xF0000000) >> 28;
65 u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
66 u32 major_rev = (omap_rev & 0x00000F00) >> 8;
67 u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
69 const char *sec_s, *package = NULL;
71 switch (get_device_type()) {
88 #if defined(CONFIG_DRA7XX)
90 switch (omap_rev & 0xF) {
91 case DRA762_ABZ_PACKAGE:
94 case DRA762_ACD_PACKAGE:
106 printf("%x-%s ES%x.%x", omap_variant, sec_s, major_rev, minor_rev);
108 printf(" %s package\n", package);
113 #ifdef CONFIG_SPL_BUILD
114 void spl_display_print(void)
120 void __weak srcomp_enable(void)
125 * do_board_detect() - Detect board description
127 * Function to detect board description. This is expected to be
128 * overridden in the SoC family board file where desired.
130 void __weak do_board_detect(void)
135 * vcores_init() - Assign omap_vcores based on board
137 * Function to pick the vcores based on board. This is expected to be
138 * overridden in the SoC family board file where desired.
140 void __weak vcores_init(void)
149 * init_package_revision() - Initialize package revision
151 * Function to get the pacakage information. This is expected to be
152 * overridden in the SoC family file where desired.
154 void __weak init_package_revision(void)
159 * early_system_init - Does Early system initialization.
161 * Does early system init of watchdog, muxing, andclocks
162 * Watchdog disable is done always. For the rest what gets done
163 * depends on the boot mode in which this function is executed when
164 * 1. SPL running from SRAM
165 * 2. U-Boot running from FLASH
166 * 3. U-Boot loaded to SDRAM by SPL
167 * 4. U-Boot loaded to SDRAM by ROM code using the
168 * Configuration Header feature
169 * Please have a look at the respective functions to see what gets
170 * done in each of these cases
171 * This function is called with SRAM stack.
173 void early_system_init(void)
175 init_omap_revision();
177 init_package_revision();
179 #ifdef CONFIG_SPL_BUILD
181 force_emif_self_refresh();
185 #ifdef CONFIG_SPL_BUILD
189 setup_early_clocks();
190 #ifdef CONFIG_SPL_BUILD
192 * Save the boot parameters passed from romcode.
193 * We cannot delay the saving further than this,
194 * to prevent overwrites.
196 save_omap_boot_params();
199 #ifdef CONFIG_SPL_BUILD
203 #ifdef CONFIG_DEBUG_UART_OMAP
209 #ifdef CONFIG_SPL_BUILD
210 void board_init_f(ulong dummy)
213 #ifdef CONFIG_BOARD_EARLY_INIT_F
214 board_early_init_f();
216 /* For regular u-boot sdram_init() is called from dram_init() */
218 gd->ram_size = omap_sdram_size();
222 int arch_cpu_init_dm(void)
229 * Routine: wait_for_command_complete
230 * Description: Wait for posting to finish on watchdog
232 void wait_for_command_complete(struct watchdog *wd_base)
236 pending = readl(&wd_base->wwps);
241 * Routine: watchdog_init
242 * Description: Shut down watch dogs
244 void watchdog_init(void)
246 struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;
248 writel(WD_UNLOCK1, &wd2_base->wspr);
249 wait_for_command_complete(wd2_base);
250 writel(WD_UNLOCK2, &wd2_base->wspr);
255 * This function finds the SDRAM size available in the system
256 * based on DMM section configurations
257 * This is needed because the size of memory installed may be
258 * different on different versions of the board
260 u32 omap_sdram_size(void)
262 u32 section, i, valid;
263 u64 sdram_start = 0, sdram_end = 0, addr,
264 size, total_size = 0, trap_size = 0, trap_start = 0;
266 for (i = 0; i < 4; i++) {
267 section = __raw_readl(DMM_BASE + i*4);
268 valid = (section & EMIF_SDRC_ADDRSPC_MASK) >>
269 (EMIF_SDRC_ADDRSPC_SHIFT);
270 addr = section & EMIF_SYS_ADDR_MASK;
272 /* See if the address is valid */
273 if ((addr >= TI_ARMV7_DRAM_ADDR_SPACE_START) &&
274 (addr < TI_ARMV7_DRAM_ADDR_SPACE_END)) {
275 size = ((section & EMIF_SYS_SIZE_MASK) >>
276 EMIF_SYS_SIZE_SHIFT);
280 if (valid != DMM_SDRC_ADDR_SPC_INVALID) {
281 if (!sdram_start || (addr < sdram_start))
283 if (!sdram_end || ((addr + size) > sdram_end))
284 sdram_end = addr + size;
292 if ((trap_start >= sdram_start) && (trap_start < sdram_end))
293 total_size = (sdram_end - sdram_start) - (trap_size);
295 total_size = sdram_end - sdram_start;
303 * Description: sets uboots idea of sdram size
308 gd->ram_size = omap_sdram_size();
313 * Print board information
317 puts(sysinfo.board_string);
321 #if defined(CONFIG_DISPLAY_CPUINFO)
323 * Print CPU information
325 int print_cpuinfo(void)