4 * Common bootmode functions for omap based boards
6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
8 * SPDX-License-Identifier: GPL-2.0+
13 #include <environment.h>
15 #include <asm/omap_common.h>
16 #include <asm/arch/omap.h>
17 #include <asm/arch/mmc_host_def.h>
18 #include <asm/arch/sys_proto.h>
23 DECLARE_GLOBAL_DATA_PTR;
25 __weak u32 omap_sys_boot_device(void)
27 return BOOT_DEVICE_NONE;
30 void save_omap_boot_params(void)
32 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
33 struct omap_boot_parameters *omap_boot_params;
34 int sys_boot_device = 0;
38 if ((boot_params < NON_SECURE_SRAM_START) ||
39 (boot_params > NON_SECURE_SRAM_END))
42 omap_boot_params = (struct omap_boot_parameters *)boot_params;
44 boot_device = omap_boot_params->boot_device;
45 boot_mode = MMCSD_MODE_UNDEFINED;
49 #ifdef BOOT_DEVICE_NAND_I2C
51 * Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
52 * Otherwise the SPL boot IF can't handle this device correctly.
53 * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
54 * Draco leads to this boot-device passed to SPL from the BootROM.
56 if (boot_device == BOOT_DEVICE_NAND_I2C)
57 boot_device = BOOT_DEVICE_NAND;
59 #ifdef BOOT_DEVICE_QSPI_4
61 * We get different values for QSPI_1 and QSPI_4 being used, but
62 * don't actually care about this difference. Rather than
63 * mangle the later code, if we're coming in as QSPI_4 just
64 * change to the QSPI_1 value.
66 if (boot_device == BOOT_DEVICE_QSPI_4)
67 boot_device = BOOT_DEVICE_SPI;
71 * On PG2.0 and later TI816x the values we get when booting are not the
72 * same as on PG1.0, which is what the defines are based on. Update
75 if (get_cpu_rev() != 1) {
76 if (boot_device == 0x05) {
77 omap_boot_params->boot_device = BOOT_DEVICE_NAND;
78 boot_device = BOOT_DEVICE_NAND;
80 if (boot_device == 0x08) {
81 omap_boot_params->boot_device = BOOT_DEVICE_MMC1;
82 boot_device = BOOT_DEVICE_MMC1;
87 * When booting from peripheral booting, the boot device is not usable
88 * as-is (unless there is support for it), so the boot device is instead
89 * figured out using the SYS_BOOT pins.
91 switch (boot_device) {
92 #if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)
93 case BOOT_DEVICE_UART:
97 #if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)
102 #if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USBETH_SUPPORT)
103 case BOOT_DEVICE_USBETH:
107 #if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT)
108 case BOOT_DEVICE_CPGMAC:
112 #if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT)
113 case BOOT_DEVICE_DFU:
119 if (sys_boot_device) {
120 boot_device = omap_sys_boot_device();
122 /* MMC raw mode will fallback to FS mode. */
123 if ((boot_device >= MMC_BOOT_DEVICES_START) &&
124 (boot_device <= MMC_BOOT_DEVICES_END))
125 boot_mode = MMCSD_MODE_RAW;
128 gd->arch.omap_boot_device = boot_device;
132 #ifdef CONFIG_OMAP34XX
133 if ((boot_device >= MMC_BOOT_DEVICES_START) &&
134 (boot_device <= MMC_BOOT_DEVICES_END)) {
135 switch (boot_device) {
136 case BOOT_DEVICE_MMC1:
137 boot_mode = MMCSD_MODE_FS;
139 case BOOT_DEVICE_MMC2:
140 boot_mode = MMCSD_MODE_RAW;
146 * If the boot device was dynamically changed and doesn't match what
147 * the bootrom initially booted, we cannot use the boot device
148 * descriptor to figure out the boot mode.
150 if ((boot_device == omap_boot_params->boot_device) &&
151 (boot_device >= MMC_BOOT_DEVICES_START) &&
152 (boot_device <= MMC_BOOT_DEVICES_END)) {
153 boot_params = omap_boot_params->boot_device_descriptor;
154 if ((boot_params < NON_SECURE_SRAM_START) ||
155 (boot_params > NON_SECURE_SRAM_END))
158 boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET));
159 if ((boot_params < NON_SECURE_SRAM_START) ||
160 (boot_params > NON_SECURE_SRAM_END))
163 boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET));
165 if (boot_mode != MMCSD_MODE_FS &&
166 boot_mode != MMCSD_MODE_RAW)
167 #ifdef CONFIG_SUPPORT_EMMC_BOOT
168 boot_mode = MMCSD_MODE_EMMCBOOT;
170 boot_mode = MMCSD_MODE_UNDEFINED;
175 gd->arch.omap_boot_mode = boot_mode;
177 #if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \
178 !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
182 gd->arch.omap_ch_flags = omap_boot_params->ch_flags;
186 #ifdef CONFIG_SPL_BUILD
187 u32 spl_boot_device(void)
189 return gd->arch.omap_boot_device;
192 u32 spl_boot_mode(const u32 boot_device)
194 return gd->arch.omap_boot_mode;
197 void spl_board_init(void)
199 /* Prepare console output */
200 preloader_console_init();
202 #if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
205 #ifdef CONFIG_SPL_I2C_SUPPORT
206 i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
208 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
211 #if defined(CONFIG_HW_WATCHDOG)
215 am33xx_spl_board_init();
219 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
221 typedef void __noreturn (*image_entry_noargs_t)(u32 *);
222 image_entry_noargs_t image_entry =
223 (image_entry_noargs_t) spl_image->entry_point;
225 u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
227 debug("image entry point: 0x%lX\n", spl_image->entry_point);
228 /* Pass the saved boot_params from rom code */
229 image_entry((u32 *)boot_params);
233 #ifdef CONFIG_SCSI_AHCI_PLAT
234 void arch_preboot_os(void)
236 ahci_reset((void __iomem *)DWC_AHSATA_BASE);
240 #if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE)
241 int fb_set_reboot_flag(void)
243 printf("Setting reboot to fastboot flag ...\n");
244 setenv("dofastboot", "1");