arch/arm/mach-omap2/am33xx/ddr.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * DDR Configuration for AM33xx devices.
   4  *
   5  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   6  */
   7
   8 #include <common.h>
   9 #include <log.h>
  10 #include <asm/arch/cpu.h>
  11 #include <asm/arch/ddr_defs.h>
  12 #include <asm/arch/sys_proto.h>
  13 #include <asm/io.h>
  14 #include <asm/emif.h>
  15 #include <linux/delay.h>
  16
  17 /**
  18  * Base address for EMIF instances
  19  */
  20 static struct emif_reg_struct *emif_reg[2] = {
  21                                 (struct emif_reg_struct *)EMIF4_0_CFG_BASE,
  22                                 (struct emif_reg_struct *)EMIF4_1_CFG_BASE};
  23
  24 /**
  25  * Base addresses for DDR PHY cmd/data regs
  26  */
  27 static struct ddr_cmd_regs *ddr_cmd_reg[2] = {
  28                                 (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR,
  29                                 (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR2};
  30
  31 static struct ddr_data_regs *ddr_data_reg[2] = {
  32                                 (struct ddr_data_regs *)DDR_PHY_DATA_ADDR,
  33                                 (struct ddr_data_regs *)DDR_PHY_DATA_ADDR2};
  34
  35 /**
  36  * Base address for ddr io control instances
  37  */
  38 static struct ddr_cmdtctrl *ioctrl_reg = {
  39                         (struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR};
  40
  41 static inline u32 get_mr(int nr, u32 cs, u32 mr_addr)
  42 {
  43         u32 mr;
  44
  45         mr_addr |= cs << EMIF_REG_CS_SHIFT;
  46         writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
  47
  48         mr = readl(&emif_reg[nr]->emif_lpddr2_mode_reg_data);
  49         debug("get_mr: EMIF1 cs %d mr %08x val 0x%x\n", cs, mr_addr, mr);
  50         if (((mr & 0x0000ff00) >>  8) == (mr & 0xff) &&
  51             ((mr & 0x00ff0000) >> 16) == (mr & 0xff) &&
  52             ((mr & 0xff000000) >> 24) == (mr & 0xff))
  53                 return mr & 0xff;
  54         else
  55                 return mr;
  56 }
  57
  58 static inline void set_mr(int nr, u32 cs, u32 mr_addr, u32 mr_val)
  59 {
  60         mr_addr |= cs << EMIF_REG_CS_SHIFT;
  61         writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
  62         writel(mr_val, &emif_reg[nr]->emif_lpddr2_mode_reg_data);
  63 }
  64
  65 static void configure_mr(int nr, u32 cs)
  66 {
  67         u32 mr_addr;
  68
  69         while (get_mr(nr, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
  70                 ;
  71         set_mr(nr, cs, LPDDR2_MR10, 0x56);
  72
  73         set_mr(nr, cs, LPDDR2_MR1, 0x43);
  74         set_mr(nr, cs, LPDDR2_MR2, 0x2);
  75
  76         mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
  77         set_mr(nr, cs, mr_addr, 0x2);
  78 }
  79
  80 /*
  81  * Configure EMIF4D5 registers and MR registers For details about these magic
  82  * values please see the EMIF registers section of the TRM.
  83  */
  84 void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
  85 {
  86 #ifdef CONFIG_AM43XX
  87         struct prm_device_inst *prm_device =
  88                         (struct prm_device_inst *)PRM_DEVICE_INST;
  89 #endif
  90
  91         writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
  92         writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
  93         writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
  94
  95         writel(regs->temp_alert_config, &emif_reg[nr]->emif_temp_alert_config);
  96         writel(regs->emif_rd_wr_lvl_rmp_win,
  97                &emif_reg[nr]->emif_rd_wr_lvl_rmp_win);
  98         writel(regs->emif_rd_wr_lvl_rmp_ctl,
  99                &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl);
 100         writel(regs->emif_rd_wr_lvl_ctl, &emif_reg[nr]->emif_rd_wr_lvl_ctl);
 101         writel(regs->emif_rd_wr_exec_thresh,
 102                &emif_reg[nr]->emif_rd_wr_exec_thresh);
 103
 104         /*
 105          * for most SOCs these registers won't need to be changed so only
 106          * write to these registers if someone explicitly has set the
 107          * register's value.
 108          */
 109         if(regs->emif_cos_config) {
 110                 writel(regs->emif_prio_class_serv_map, &emif_reg[nr]->emif_prio_class_serv_map);
 111                 writel(regs->emif_connect_id_serv_1_map, &emif_reg[nr]->emif_connect_id_serv_1_map);
 112                 writel(regs->emif_connect_id_serv_2_map, &emif_reg[nr]->emif_connect_id_serv_2_map);
 113                 writel(regs->emif_cos_config, &emif_reg[nr]->emif_cos_config);
 114         }
 115
 116         /*
 117          * Sequence to ensure that the PHY is in a known state prior to
 118          * startting hardware leveling.  Also acts as to latch some state from
 119          * the EMIF into the PHY.
 120          */
 121         writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
 122         writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc);
 123         writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
 124
 125         clrbits_le32(&emif_reg[nr]->emif_sdram_ref_ctrl,
 126                         EMIF_REG_INITREF_DIS_MASK);
 127
 128         writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
 129         writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
 130
 131         /* Wait 1ms because of L3 timeout error */
 132         udelay(1000);
 133
 134         writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
 135         writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
 136
 137 #ifdef CONFIG_AM43XX
 138         /*
 139          * Disable EMIF_DEVOFF
 140          * -> Cold Boot: This is just rewriting the default register value.
 141          * -> RTC Resume: Must disable DEVOFF before leveling.
 142          */
 143         writel(0, &prm_device->emif_ctrl);
 144 #endif
 145
 146         /* Perform hardware leveling for DDR3 */
 147         if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) {
 148                 writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) |
 149                        0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36);
 150                 writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw) |
 151                        0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw);
 152
 153                 writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl);
 154
 155                 /* Enable read leveling */
 156                 writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_ctl);
 157
 158                 /* Wait 1ms because of L3 timeout error */
 159                 udelay(1000);
 160
 161                 /*
 162                  * Enable full read and write leveling.  Wait for read and write
 163                  * leveling bit to clear RDWRLVLFULL_START bit 31
 164                  */
 165                 while ((readl(&emif_reg[nr]->emif_rd_wr_lvl_ctl) & 0x80000000)
 166                       != 0)
 167                         ;
 168
 169                 /* Check the timeout register to see if leveling is complete */
 170                 if ((readl(&emif_reg[nr]->emif_status) & 0x70) != 0)
 171                         puts("DDR3 H/W leveling incomplete with errors\n");
 172
 173         } else {
 174                 /* DDR2 */
 175                 configure_mr(nr, 0);
 176                 configure_mr(nr, 1);
 177         }
 178 }
 179
 180 /**
 181  * Configure SDRAM
 182  */
 183 void config_sdram(const struct emif_regs *regs, int nr)
 184 {
 185         if (regs->zq_config) {
 186                 writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
 187                 writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
 188                 writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
 189
 190                 /* Trigger initialization */
 191                 writel(0x00003100, &emif_reg[nr]->emif_sdram_ref_ctrl);
 192                 /* Wait 1ms because of L3 timeout error */
 193                 udelay(1000);
 194
 195                 /* Write proper sdram_ref_cref_ctrl value */
 196                 writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
 197                 writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
 198         }
 199         writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
 200         writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
 201         writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
 202
 203         /* Write REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT. */
 204         if (regs->ocp_config)
 205                 writel(regs->ocp_config, &emif_reg[nr]->emif_l3_config);
 206 }
 207
 208 /**
 209  * Set SDRAM timings
 210  */
 211 void set_sdram_timings(const struct emif_regs *regs, int nr)
 212 {
 213         writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1);
 214         writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1_shdw);
 215         writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2);
 216         writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw);
 217         writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3);
 218         writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw);
 219 }
 220
 221 /*
 222  * Configure EXT PHY registers for software leveling
 223  */
 224 static void ext_phy_settings_swlvl(const struct emif_regs *regs, int nr)
 225 {
 226         u32 *ext_phy_ctrl_base = 0;
 227         u32 *emif_ext_phy_ctrl_base = 0;
 228         __maybe_unused const u32 *ext_phy_ctrl_const_regs;
 229         u32 i = 0;
 230         __maybe_unused u32 size;
 231
 232         ext_phy_ctrl_base = (u32 *)&(regs->emif_ddr_ext_phy_ctrl_1);
 233         emif_ext_phy_ctrl_base =
 234                         (u32 *)&(emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
 235
 236         /* Configure external phy control timing registers */
 237         for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
 238                 writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
 239                 /* Update shadow registers */
 240                 writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
 241         }
 242
 243 #ifdef CONFIG_AM43XX
 244         /*
 245          * External phy 6-24 registers do not change with ddr frequency.
 246          * These only need to be set on DDR2 on AM43xx.
 247          */
 248         emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs, &size);
 249
 250         if (!size)
 251                 return;
 252
 253         for (i = 0; i < size; i++) {
 254                 writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
 255                 /* Update shadow registers */
 256                 writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
 257         }
 258 #endif
 259 }
 260
 261 /*
 262  * Configure EXT PHY registers for hardware leveling
 263  */
 264 static void ext_phy_settings_hwlvl(const struct emif_regs *regs, int nr)
 265 {
 266         /*
 267          * Enable hardware leveling on the EMIF.  For details about these
 268          * magic values please see the EMIF registers section of the TRM.
 269          */
 270         if (regs->emif_ddr_phy_ctlr_1 & 0x00040000) {
 271                 /* PHY_INVERT_CLKOUT = 1 */
 272                 writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
 273                 writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
 274         } else {
 275                 /* PHY_INVERT_CLKOUT = 0 */
 276                 writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
 277                 writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
 278         }
 279
 280         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22);
 281         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22_shdw);
 282         writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23);
 283         writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23_shdw);
 284         writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24);
 285         writel(0x40010080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_24_shdw);
 286         writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25);
 287         writel(0x08102040, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_25_shdw);
 288         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26);
 289         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_26_shdw);
 290         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27);
 291         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_27_shdw);
 292         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28);
 293         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_28_shdw);
 294         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29);
 295         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_29_shdw);
 296         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30);
 297         writel(0x00200020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_30_shdw);
 298         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31);
 299         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_31_shdw);
 300         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32);
 301         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_32_shdw);
 302         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33);
 303         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_33_shdw);
 304         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34);
 305         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_34_shdw);
 306         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35);
 307         writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_35_shdw);
 308         writel(0x00000077, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36);
 309         writel(0x00000077, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw);
 310
 311         /*
 312          * Sequence to ensure that the PHY is again in a known state after
 313          * hardware leveling.
 314          */
 315         writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
 316         writel(0x2411, &emif_reg[nr]->emif_iodft_tlgc);
 317         writel(0x2011, &emif_reg[nr]->emif_iodft_tlgc);
 318 }
 319
 320 /**
 321  * Configure DDR PHY
 322  */
 323 void config_ddr_phy(const struct emif_regs *regs, int nr)
 324 {
 325         /*
 326          * Disable initialization and refreshes for now until we finish
 327          * programming EMIF regs and set time between rising edge of
 328          * DDR_RESET to rising edge of DDR_CKE to > 500us per memory spec.
 329          * We currently hardcode a value based on a max expected frequency
 330          * of 400MHz.
 331          */
 332         writel(EMIF_REG_INITREF_DIS_MASK | 0x3100,
 333                 &emif_reg[nr]->emif_sdram_ref_ctrl);
 334
 335         writel(regs->emif_ddr_phy_ctlr_1,
 336                 &emif_reg[nr]->emif_ddr_phy_ctrl_1);
 337         writel(regs->emif_ddr_phy_ctlr_1,
 338                 &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw);
 339
 340         if (get_emif_rev((u32)emif_reg[nr]) == EMIF_4D5) {
 341                 if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3)
 342                         ext_phy_settings_hwlvl(regs, nr);
 343                 else
 344                         ext_phy_settings_swlvl(regs, nr);
 345         }
 346 }
 347
 348 /**
 349  * Configure DDR CMD control registers
 350  */
 351 void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
 352 {
 353         if (!cmd)
 354                 return;
 355
 356         writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
 357         writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
 358
 359         writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
 360         writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
 361
 362         writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
 363         writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
 364 }
 365
 366 /**
 367  * Configure DDR DATA registers
 368  */
 369 void config_ddr_data(const struct ddr_data *data, int nr)
 370 {
 371         int i;
 372
 373         if (!data)
 374                 return;
 375
 376         for (i = 0; i < DDR_DATA_REGS_NR; i++) {
 377                 writel(data->datardsratio0,
 378                         &(ddr_data_reg[nr]+i)->dt0rdsratio0);
 379                 writel(data->datawdsratio0,
 380                         &(ddr_data_reg[nr]+i)->dt0wdsratio0);
 381                 writel(data->datawiratio0,
 382                         &(ddr_data_reg[nr]+i)->dt0wiratio0);
 383                 writel(data->datagiratio0,
 384                         &(ddr_data_reg[nr]+i)->dt0giratio0);
 385                 writel(data->datafwsratio0,
 386                         &(ddr_data_reg[nr]+i)->dt0fwsratio0);
 387                 writel(data->datawrsratio0,
 388                         &(ddr_data_reg[nr]+i)->dt0wrsratio0);
 389         }
 390 }
 391
 392 void config_io_ctrl(const struct ctrl_ioregs *ioregs)
 393 {
 394         if (!ioregs)
 395                 return;
 396
 397         writel(ioregs->cm0ioctl, &ioctrl_reg->cm0ioctl);
 398         writel(ioregs->cm1ioctl, &ioctrl_reg->cm1ioctl);
 399         writel(ioregs->cm2ioctl, &ioctrl_reg->cm2ioctl);
 400         writel(ioregs->dt0ioctl, &ioctrl_reg->dt0ioctl);
 401         writel(ioregs->dt1ioctl, &ioctrl_reg->dt1ioctl);
 402 #ifdef CONFIG_AM43XX
 403         writel(ioregs->dt2ioctrl, &ioctrl_reg->dt2ioctrl);
 404         writel(ioregs->dt3ioctrl, &ioctrl_reg->dt3ioctrl);
 405         writel(ioregs->emif_sdram_config_ext,
 406                &ioctrl_reg->emif_sdram_config_ext);
 407 #endif
 408 }