3 menu "TI OMAP2/3/4 Specific Features"
5 config ARCH_OMAP2PLUS_TYPICAL
6 bool "Typical OMAP configuration"
12 select NEON if ARCH_OMAP3 || ARCH_OMAP4
14 select SERIAL_OMAP_CONSOLE
17 select MENELAUS if ARCH_OMAP2
18 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
19 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
22 Compile a kernel suitable for booting most boards
24 config SOC_HAS_OMAP2_SDRC
25 bool "OMAP2 SDRAM Controller support"
29 depends on ARCH_OMAP2PLUS
32 select MULTI_IRQ_HANDLER
33 select SOC_HAS_OMAP2_SDRC
37 depends on ARCH_OMAP2PLUS
40 select USB_ARCH_HAS_EHCI if USB_SUPPORT
42 select PM_RUNTIME if CPU_IDLE
44 select ARM_CPU_SUSPEND if PM
45 select MULTI_IRQ_HANDLER
46 select SOC_HAS_OMAP2_SDRC
51 depends on ARCH_OMAP2PLUS
56 select LOCAL_TIMERS if SMP
57 select PL310_ERRATA_588369
58 select PL310_ERRATA_727915
59 select ARM_ERRATA_720789
61 select PM_RUNTIME if CPU_IDLE
63 select USB_ARCH_HAS_EHCI if USB_SUPPORT
64 select ARM_CPU_SUSPEND if PM
66 comment "OMAP Core Type"
70 bool "OMAP2420 support"
74 select SOC_HAS_OMAP2_SDRC
77 bool "OMAP2430 support"
80 select SOC_HAS_OMAP2_SDRC
83 bool "OMAP3430 support"
86 select SOC_HAS_OMAP2_SDRC
97 select ARM_CPU_SUSPEND if PM
98 select MULTI_IRQ_HANDLER
100 config OMAP_PACKAGE_ZAF
103 config OMAP_PACKAGE_ZAC
106 config OMAP_PACKAGE_CBC
109 config OMAP_PACKAGE_CBB
112 config OMAP_PACKAGE_CUS
115 config OMAP_PACKAGE_CBP
118 config OMAP_PACKAGE_CBL
121 config OMAP_PACKAGE_CBS
124 comment "OMAP Board Type"
125 depends on ARCH_OMAP2PLUS
127 config MACH_OMAP_GENERIC
128 bool "Generic OMAP2+ board"
129 depends on ARCH_OMAP2PLUS
132 Support for generic TI OMAP2+ boards using Flattened Device Tree.
133 More information at Documentation/devicetree
135 config MACH_OMAP2_TUSB6010
137 depends on ARCH_OMAP2 && SOC_OMAP2420
138 default y if MACH_NOKIA_N8X0
141 bool "OMAP 2420 H4 board"
142 depends on SOC_OMAP2420
144 select OMAP_PACKAGE_ZAF
145 select OMAP_DEBUG_DEVICES
147 config MACH_OMAP_APOLLON
148 bool "OMAP 2420 Apollon board"
149 depends on SOC_OMAP2420
151 select OMAP_PACKAGE_ZAC
153 config MACH_OMAP_2430SDP
154 bool "OMAP 2430 SDP board"
155 depends on SOC_OMAP2430
157 select OMAP_PACKAGE_ZAC
159 config MACH_OMAP3_BEAGLE
160 bool "OMAP3 BEAGLE board"
161 depends on ARCH_OMAP3
163 select OMAP_PACKAGE_CBB
165 config MACH_DEVKIT8000
166 bool "DEVKIT8000 board"
167 depends on ARCH_OMAP3
169 select OMAP_PACKAGE_CUS
172 bool "OMAP3 LDP board"
173 depends on ARCH_OMAP3
175 select OMAP_PACKAGE_CBB
177 config MACH_OMAP3530_LV_SOM
178 bool "OMAP3 Logic 3530 LV SOM board"
179 depends on ARCH_OMAP3
180 select OMAP_PACKAGE_CBB
183 Support for the LogicPD OMAP3530 SOM Development kit
184 for full description please see the products webpage at
185 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
187 config MACH_OMAP3_TORPEDO
188 bool "OMAP3 Logic 35x Torpedo board"
189 depends on ARCH_OMAP3
190 select OMAP_PACKAGE_CBB
193 Support for the LogicPD OMAP35x Torpedo Development kit
194 for full description please see the products webpage at
195 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
198 bool "Gumstix Overo board"
199 depends on ARCH_OMAP3
201 select OMAP_PACKAGE_CBB
204 bool "OMAP 3530 EVM board"
205 depends on ARCH_OMAP3
207 select OMAP_PACKAGE_CBB
209 config MACH_OMAP3517EVM
210 bool "OMAP3517/ AM3517 EVM board"
211 depends on ARCH_OMAP3
213 select OMAP_PACKAGE_CBB
215 config MACH_CRANEBOARD
216 bool "AM3517/05 CRANE board"
217 depends on ARCH_OMAP3
218 select OMAP_PACKAGE_CBB
220 config MACH_OMAP3_PANDORA
222 depends on ARCH_OMAP3
224 select OMAP_PACKAGE_CBB
225 select REGULATOR_FIXED_VOLTAGE if REGULATOR
227 config MACH_OMAP3_TOUCHBOOK
228 bool "OMAP3 Touch Book"
229 depends on ARCH_OMAP3
232 config MACH_OMAP_3430SDP
233 bool "OMAP 3430 SDP board"
234 depends on ARCH_OMAP3
236 select OMAP_PACKAGE_CBB
238 config MACH_NOKIA_N800
241 config MACH_NOKIA_N810
244 config MACH_NOKIA_N810_WIMAX
247 config MACH_NOKIA_N8X0
248 bool "Nokia N800/N810"
249 depends on SOC_OMAP2420
251 select OMAP_PACKAGE_ZAC
252 select MACH_NOKIA_N800
253 select MACH_NOKIA_N810
254 select MACH_NOKIA_N810_WIMAX
256 config MACH_NOKIA_RM680
257 bool "Nokia RM-680/696 board"
258 depends on ARCH_OMAP3
260 select OMAP_PACKAGE_CBB
261 select MACH_NOKIA_RM696
263 config MACH_NOKIA_RX51
264 bool "Nokia RX-51 board"
265 depends on ARCH_OMAP3
267 select OMAP_PACKAGE_CBB
269 config MACH_OMAP_ZOOM2
270 bool "OMAP3 Zoom2 board"
271 depends on ARCH_OMAP3
273 select OMAP_PACKAGE_CBB
275 select SERIAL_CORE_CONSOLE
276 select SERIAL_8250_CONSOLE
277 select REGULATOR_FIXED_VOLTAGE if REGULATOR
279 config MACH_OMAP_ZOOM3
280 bool "OMAP3630 Zoom3 board"
281 depends on ARCH_OMAP3
283 select OMAP_PACKAGE_CBP
285 select SERIAL_CORE_CONSOLE
286 select SERIAL_8250_CONSOLE
287 select REGULATOR_FIXED_VOLTAGE if REGULATOR
290 bool "CompuLab CM-T35/CM-T3730 modules"
291 depends on ARCH_OMAP3
294 select OMAP_PACKAGE_CUS
297 bool "CompuLab CM-T3517 module"
298 depends on ARCH_OMAP3
300 select OMAP_PACKAGE_CBB
307 depends on ARCH_OMAP3
309 select OMAP_PACKAGE_CBB
312 bool "IGEP OMAP3 module"
313 depends on ARCH_OMAP3
315 select OMAP_PACKAGE_CBB
319 bool "OMAP3 SBC STALKER board"
320 depends on ARCH_OMAP3
322 select OMAP_PACKAGE_CUS
324 config MACH_OMAP_3630SDP
325 bool "OMAP3630 SDP board"
326 depends on ARCH_OMAP3
328 select OMAP_PACKAGE_CBP
330 config MACH_TI8168EVM
331 bool "TI8168 Evaluation Module"
332 depends on SOC_TI81XX
335 config MACH_TI8148EVM
336 bool "TI8148 Evaluation Module"
337 depends on SOC_TI81XX
340 config MACH_OMAP_4430SDP
341 bool "OMAP 4430 SDP board"
343 depends on ARCH_OMAP4
344 select OMAP_PACKAGE_CBL
345 select OMAP_PACKAGE_CBS
346 select REGULATOR_FIXED_VOLTAGE if REGULATOR
348 config MACH_OMAP4_PANDA
349 bool "OMAP4 Panda Board"
351 depends on ARCH_OMAP4
352 select OMAP_PACKAGE_CBL
353 select OMAP_PACKAGE_CBS
354 select REGULATOR_FIXED_VOLTAGE if REGULATOR
357 bool "OMAP3 debugging peripherals"
358 depends on ARCH_OMAP3
362 Say Y here to enable debugging hardware of omap3
364 config OMAP3_SDRC_AC_TIMING
365 bool "Enable SDRC AC timing register changes"
366 depends on ARCH_OMAP3
369 If you know that none of your system initiators will attempt to
370 access SDRAM during CORE DVFS, select Y here. This should boost
371 SDRAM performance at lower CORE OPPs. There are relatively few
372 users who will wish to say yes at this point - almost everyone will
373 wish to say no. Selecting yes without understanding what is
374 going on could result in system crashes;
376 config OMAP4_ERRATA_I688
377 bool "OMAP4 errata: Async Bridge Corruption"
378 depends on ARCH_OMAP4
379 select ARCH_HAS_BARRIERS
381 If a data is stalled inside asynchronous bridge because of back
382 pressure, it may be accepted multiple times, creating pointer
383 misalignment that will corrupt next transfers on that data path
384 until next reset of the system (No recovery procedure once the
385 issue is hit, the path remains consistently broken). Async bridge
386 can be found on path between MPU to EMIF and MPU to L3 interconnect.
387 This situation can happen only when the idle is initiated by a
388 Master Request Disconnection (which is trigged by software when
389 executing WFI on CPU).
390 The work-around for this errata needs all the initiators connected
391 through async bridge must ensure that data path is properly drained
392 before issuing WFI. This condition will be met if one Strongly ordered
393 access is performed to the target right before executing the WFI.
394 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
395 IO barrier ensure that there is no synchronisation loss on initiators
396 operating on both interconnect port simultaneously.