2 * linux/arch/arm/mach-omap1/board-palmtt.c
4 * Modified from board-palmtt2.c
6 * Modified and amended for Palm Tungsten|T
7 * by Marek Vasut <marek.vasut@gmail.com>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/gpio.h>
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/platform_device.h>
19 #include <linux/notifier.h>
20 #include <linux/clk.h>
21 #include <linux/input.h>
22 #include <linux/interrupt.h>
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/partitions.h>
25 #include <linux/mtd/physmap.h>
26 #include <linux/leds.h>
27 #include <linux/omapfb.h>
28 #include <linux/spi/spi.h>
29 #include <linux/spi/ads7846.h>
30 #include <linux/platform_data/omap1_bl.h>
31 #include <linux/platform_data/leds-omap.h>
33 #include <asm/mach-types.h>
34 #include <asm/mach/arch.h>
35 #include <asm/mach/map.h>
39 #include <linux/omap-dma.h>
41 #include <linux/platform_data/keypad-omap.h>
43 #include <mach/hardware.h>
48 #define PALMTT_USBDETECT_GPIO 0
49 #define PALMTT_CABLE_GPIO 1
50 #define PALMTT_LED_GPIO 3
51 #define PALMTT_PENIRQ_GPIO 6
52 #define PALMTT_MMC_WP_GPIO 8
53 #define PALMTT_HDQ_GPIO 11
55 static const unsigned int palmtt_keymap[] = {
58 KEY(2, 0, KEY_LEFTCTRL),
69 static struct mtd_partition palmtt_partitions[] = {
77 .name = "PalmOS-BootLoader(ro)",
80 .mask_flags = MTD_WRITEABLE,
84 .offset = MTDPART_OFS_APPEND,
89 .name = "PalmOS-FS(ro)",
90 .offset = MTDPART_OFS_APPEND,
91 .size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
92 .mask_flags = MTD_WRITEABLE,
95 .name = "u-boot(rez)",
96 .offset = MTDPART_OFS_APPEND,
102 .offset = MTDPART_OFS_APPEND,
103 .size = MTDPART_SIZ_FULL,
108 static struct physmap_flash_data palmtt_flash_data = {
110 .set_vpp = omap1_set_vpp,
111 .parts = palmtt_partitions,
112 .nr_parts = ARRAY_SIZE(palmtt_partitions),
115 static struct resource palmtt_flash_resource = {
116 .start = OMAP_CS0_PHYS,
117 .end = OMAP_CS0_PHYS + SZ_8M - 1,
118 .flags = IORESOURCE_MEM,
121 static struct platform_device palmtt_flash_device = {
122 .name = "physmap-flash",
125 .platform_data = &palmtt_flash_data,
128 .resource = &palmtt_flash_resource,
131 static struct resource palmtt_kp_resources[] = {
133 .start = INT_KEYBOARD,
135 .flags = IORESOURCE_IRQ,
139 static const struct matrix_keymap_data palmtt_keymap_data = {
140 .keymap = palmtt_keymap,
141 .keymap_size = ARRAY_SIZE(palmtt_keymap),
144 static struct omap_kp_platform_data palmtt_kp_data = {
147 .keymap_data = &palmtt_keymap_data,
150 static struct platform_device palmtt_kp_device = {
151 .name = "omap-keypad",
154 .platform_data = &palmtt_kp_data,
156 .num_resources = ARRAY_SIZE(palmtt_kp_resources),
157 .resource = palmtt_kp_resources,
160 static struct platform_device palmtt_lcd_device = {
161 .name = "lcd_palmtt",
165 static struct platform_device palmtt_spi_device = {
166 .name = "spi_palmtt",
170 static struct omap_backlight_config palmtt_backlight_config = {
171 .default_intensity = 0xa0,
174 static struct platform_device palmtt_backlight_device = {
178 .platform_data= &palmtt_backlight_config,
182 static struct omap_led_config palmtt_led_config[] = {
185 .name = "palmtt:led0",
187 .gpio = PALMTT_LED_GPIO,
191 static struct omap_led_platform_data palmtt_led_data = {
192 .nr_leds = ARRAY_SIZE(palmtt_led_config),
193 .leds = palmtt_led_config,
196 static struct platform_device palmtt_led_device = {
200 .platform_data = &palmtt_led_data,
204 static struct platform_device *palmtt_devices[] __initdata = {
205 &palmtt_flash_device,
209 &palmtt_backlight_device,
213 static int palmtt_get_pendown_state(void)
215 return !gpio_get_value(6);
218 static const struct ads7846_platform_data palmtt_ts_info = {
220 .vref_delay_usecs = 100, /* internal, no capacitor */
223 .get_pendown_state = palmtt_get_pendown_state,
226 static struct spi_board_info __initdata palmtt_boardinfo[] = {
228 /* MicroWire (bus 2) CS0 has an ads7846e */
229 .modalias = "ads7846",
230 .platform_data = &palmtt_ts_info,
231 .max_speed_hz = 120000 /* max sample rate at 3V */
232 * 26 /* command + data + overhead */,
238 static struct omap_usb_config palmtt_usb_config __initdata = {
244 static struct omap_lcd_config palmtt_lcd_config __initdata = {
245 .ctrl_name = "internal",
248 static void __init omap_mpu_wdt_mode(int mode) {
250 omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
252 omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
253 omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
257 static void __init omap_palmtt_init(void)
259 /* mux pins for uarts */
260 omap_cfg_reg(UART1_TX);
261 omap_cfg_reg(UART1_RTS);
262 omap_cfg_reg(UART2_TX);
263 omap_cfg_reg(UART2_RTS);
264 omap_cfg_reg(UART3_TX);
265 omap_cfg_reg(UART3_RX);
267 omap_mpu_wdt_mode(0);
269 platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
271 palmtt_boardinfo[0].irq = gpio_to_irq(6);
272 spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
274 omap1_usb_init(&palmtt_usb_config);
275 omap_register_i2c_bus(1, 100, NULL, 0);
277 omapfb_set_lcd_config(&palmtt_lcd_config);
280 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
281 .atag_offset = 0x100,
282 .map_io = omap15xx_map_io,
283 .init_early = omap1_init_early,
284 .init_irq = omap1_init_irq,
285 .handle_irq = omap1_handle_irq,
286 .init_machine = omap_palmtt_init,
287 .init_late = omap1_init_late,
288 .init_time = omap1_timer_init,
289 .restart = omap1_restart,