1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) Marvell International Ltd. and its affiliates
9 #include <asm/arch/cpu.h>
10 #include <asm/arch/soc.h>
13 #include "sys_env_lib.h"
15 __weak void board_pex_config(void)
17 /* nothing in this weak default implementation */
20 int hws_pex_config(const struct serdes_map *serdes_map, u8 count)
22 u32 pex_idx, tmp, next_busno, first_busno, temp_pex_reg,
23 temp_reg, addr, dev_id, ctrl_mode;
24 enum serdes_type serdes_type;
27 DEBUG_INIT_FULL_S("\n### hws_pex_config ###\n");
29 for (idx = 0; idx < count; idx++) {
30 serdes_type = serdes_map[idx].serdes_type;
31 /* configuration for PEX only */
32 if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
33 (serdes_type != PEX2) && (serdes_type != PEX3))
36 if ((serdes_type != PEX0) &&
37 ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
38 (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
39 /* for PEX by4 - relevant for the first port only */
43 pex_idx = serdes_type - PEX0;
44 tmp = reg_read(PEX_CAPABILITIES_REG(pex_idx));
47 reg_write(PEX_CAPABILITIES_REG(pex_idx), tmp);
50 tmp = reg_read(SOC_CTRL_REG);
53 for (idx = 0; idx < count; idx++) {
54 serdes_type = serdes_map[idx].serdes_type;
55 if ((serdes_type != PEX0) &&
56 ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
57 (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
58 /* for PEX by4 - relevant for the first port only */
62 switch (serdes_type) {
64 tmp |= 0x1 << PCIE0_ENABLE_OFFS;
67 tmp |= 0x1 << PCIE1_ENABLE_OFFS;
70 tmp |= 0x1 << PCIE2_ENABLE_OFFS;
73 tmp |= 0x1 << PCIE3_ENABLE_OFFS;
80 reg_write(SOC_CTRL_REG, tmp);
82 /* Support gen1/gen2 */
83 DEBUG_INIT_FULL_S("Support gen1/gen2\n");
90 for (idx = 0; idx < count; idx++) {
91 serdes_type = serdes_map[idx].serdes_type;
92 DEBUG_INIT_FULL_S(" serdes_type=0x");
93 DEBUG_INIT_FULL_D(serdes_type, 8);
94 DEBUG_INIT_FULL_S("\n");
95 DEBUG_INIT_FULL_S(" idx=0x");
96 DEBUG_INIT_FULL_D(idx, 8);
97 DEBUG_INIT_FULL_S("\n");
99 /* Configuration for PEX only */
100 if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
101 (serdes_type != PEX2) && (serdes_type != PEX3))
104 if ((serdes_type != PEX0) &&
105 ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
106 (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
107 /* for PEX by4 - relevant for the first port only */
111 pex_idx = serdes_type - PEX0;
112 tmp = reg_read(PEX_DBG_STATUS_REG(pex_idx));
114 first_busno = next_busno;
115 if ((tmp & 0x7f) != 0x7e) {
116 DEBUG_INIT_S("PCIe, Idx ");
117 DEBUG_INIT_D(pex_idx, 1);
118 DEBUG_INIT_S(": detected no link\n");
123 temp_pex_reg = reg_read((PEX_CFG_DIRECT_ACCESS
124 (pex_idx, PEX_LINK_CAPABILITY_REG)));
126 if (temp_pex_reg != 0x2)
129 temp_reg = (reg_read(PEX_CFG_DIRECT_ACCESS(
131 PEX_LINK_CTRL_STAT_REG)) &
134 /* Check if the link established is GEN1 */
136 ("Checking if the link established is gen1\n");
140 pex_local_bus_num_set(pex_idx, first_busno);
141 pex_local_dev_num_set(pex_idx, 1);
142 DEBUG_INIT_FULL_S("PCIe, Idx ");
143 DEBUG_INIT_FULL_D(pex_idx, 1);
145 DEBUG_INIT_S(":** Link is Gen1, check the EP capability\n");
146 /* link is Gen1, check the EP capability */
147 addr = pex_config_read(pex_idx, first_busno, 0, 0, 0x34) & 0xff;
148 DEBUG_INIT_FULL_C("pex_config_read: return addr=0x%x", addr, 4);
151 ("pex_config_read: return 0xff -->PCIe (%d): Detected No Link.",
156 while ((pex_config_read(pex_idx, first_busno, 0, 0, addr)
158 addr = (pex_config_read(pex_idx, first_busno, 0,
159 0, addr) & 0xff00) >> 8;
162 /* Check for Gen2 and above */
163 if ((pex_config_read(pex_idx, first_busno, 0, 0,
164 addr + 0xc) & 0xf) < 0x2) {
165 DEBUG_INIT_S("PCIe, Idx ");
166 DEBUG_INIT_D(pex_idx, 1);
167 DEBUG_INIT_S(": remains Gen1\n");
171 tmp = reg_read(PEX_LINK_CTRL_STATUS2_REG(pex_idx));
172 DEBUG_RD_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
173 tmp &= ~(BIT(0) | BIT(1));
175 tmp |= BIT(6); /* Select Deemphasize (-3.5d_b) */
176 reg_write(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
177 DEBUG_WR_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
179 tmp = reg_read(PEX_CTRL_REG(pex_idx));
180 DEBUG_RD_REG(PEX_CTRL_REG(pex_idx), tmp);
182 reg_write(PEX_CTRL_REG(pex_idx), tmp);
183 DEBUG_WR_REG(PEX_CTRL_REG(pex_idx), tmp);
186 * We need to wait 10ms before reading the PEX_DBG_STATUS_REG
187 * in order not to read the status of the former state
191 DEBUG_INIT_S("PCIe, Idx ");
192 DEBUG_INIT_D(pex_idx, 1);
194 (": Link upgraded to Gen2 based on client capabilities\n");
197 /* Update pex DEVICE ID */
198 ctrl_mode = sys_env_model_get();
200 for (idx = 0; idx < count; idx++) {
201 serdes_type = serdes_map[idx].serdes_type;
202 /* configuration for PEX only */
203 if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
204 (serdes_type != PEX2) && (serdes_type != PEX3))
207 if ((serdes_type != PEX0) &&
208 ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
209 (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
210 /* for PEX by4 - relevant for the first port only */
214 pex_idx = serdes_type - PEX0;
215 dev_id = reg_read(PEX_CFG_DIRECT_ACCESS
216 (pex_idx, PEX_DEVICE_AND_VENDOR_ID));
218 dev_id |= ((ctrl_mode << 16) & 0xffff0000);
219 reg_write(PEX_CFG_DIRECT_ACCESS
220 (pex_idx, PEX_DEVICE_AND_VENDOR_ID), dev_id);
222 DEBUG_INIT_FULL_C("Update PEX Device ID ", ctrl_mode, 4);
227 int pex_local_bus_num_set(u32 pex_if, u32 bus_num)
231 DEBUG_INIT_FULL_S("\n### pex_local_bus_num_set ###\n");
233 if (bus_num >= MAX_PEX_BUSSES) {
234 DEBUG_INIT_C("pex_local_bus_num_set: Illegal bus number %d\n",
239 pex_status = reg_read(PEX_STATUS_REG(pex_if));
240 pex_status &= ~PXSR_PEX_BUS_NUM_MASK;
242 (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
243 reg_write(PEX_STATUS_REG(pex_if), pex_status);
248 int pex_local_dev_num_set(u32 pex_if, u32 dev_num)
252 DEBUG_INIT_FULL_S("\n### pex_local_dev_num_set ###\n");
254 pex_status = reg_read(PEX_STATUS_REG(pex_if));
255 pex_status &= ~PXSR_PEX_DEV_NUM_MASK;
257 (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
258 reg_write(PEX_STATUS_REG(pex_if), pex_status);
264 * pex_config_read - Read from configuration space
267 * This function performs a 32 bit read from PEX configuration space.
268 * It supports both type 0 and type 1 of Configuration Transactions
269 * (local and over bridge). In order to read from local bus segment, use
270 * bus number retrieved from pex_local_bus_num_get(). Other bus numbers
271 * will result configuration transaction of type 1 (over bridge).
274 * pex_if - PEX interface number.
275 * bus - PEX segment bus number.
276 * dev - PEX device number.
277 * func - Function number.
278 * reg_offs - Register offset.
284 * 32bit register data, 0xffffffff on error
286 u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off)
289 u32 local_dev, local_bus;
292 pex_status = reg_read(PEX_STATUS_REG(pex_if));
294 ((pex_status & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS);
296 ((pex_status & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS);
299 * In PCI Express we have only one device number
300 * and this number is the first number we encounter
301 * else that the local_dev
302 * spec pex define return on config read/write on any device
304 if (bus == local_bus) {
305 if (local_dev == 0) {
307 * if local dev is 0 then the first number we encounter
310 if ((dev != 1) && (dev != local_dev))
314 * if local dev is not 0 then the first number we
317 if ((dev != 0) && (dev != local_dev))
322 /* Creating PEX address to be passed */
323 pex_data = (bus << PXCAR_BUS_NUM_OFFS);
324 pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS);
325 pex_data |= (func << PXCAR_FUNC_NUM_OFFS);
326 /* Legacy register space */
327 pex_data |= (reg_off & PXCAR_REG_NUM_MASK);
328 /* Extended register space */
329 pex_data |= (((reg_off & PXCAR_REAL_EXT_REG_NUM_MASK) >>
330 PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
331 pex_data |= PXCAR_CONFIG_EN;
333 /* Write the address to the PEX configuration address register */
334 reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data);
337 * In order to let the PEX controller absorbed the address
338 * of the read transaction we perform a validity check that
339 * the address was written
341 if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if)))
344 /* Cleaning Master Abort */
345 reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND),
347 /* Read the Data returned in the PEX Data register */
348 pex_data = reg_read(PEX_CFG_DATA_REG(pex_if));
350 DEBUG_INIT_FULL_C(" --> ", pex_data, 4);