7 config ROM_UNIFIED_SECTIONS
10 config SYSCOUNTER_TIMER
17 bool "i.MX Resource domain controller driver"
18 depends on ARCH_MX6 || ARCH_MX7
20 i.MX Resource domain controller is used to assign masters
21 and peripherals to differet domains. This can be used to
25 bool "Support boot auxiliary core"
26 depends on ARCH_MX7 || ARCH_MX6 || ARCH_VF610
28 bootaux [addr] to boot auxiliary core.
30 config USE_IMXIMG_PLUGIN
31 bool "Use imximage plugin code"
32 depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX7ULP
34 i.MX6/7 supports DCD and Plugin. Enable this configuration
35 to use Plugin, otherwise DCD will be used.
38 bool "Support i.MX HAB features"
39 depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5
40 select FSL_CAAM if HAS_CAAM
43 This option enables the support for secure boot (HAB).
44 See doc/README.mxc_hab for more details.
47 hex "Maximum size for Command Sequence File (CSF) binary"
50 Define the maximum size for Command Sequence File (CSF) binary
51 this information is used to define the image boot data.
54 bool "Support the 'bmode' command"
56 depends on ARCH_MX6 || ARCH_MX5
58 This enables the 'bmode' (bootmode) command for forcing
59 a boot from specific media.
61 This is useful for forcing the ROM's usb downloader to
62 activate upon a watchdog reset which is nice when iterating
63 on U-Boot. Using the reset button or running bmode normal
64 will set it back to normal. This command currently
65 supports i.MX53 and i.MX6.
68 bool "Support the 'dek_blob' command"
70 This enables the 'dek_blob' command which is used with the
71 Freescale secure boot mechanism. This command encapsulates and
72 creates a blob of data. See also CMD_BLOB and doc/README.mxc_hab for
76 bool "Support the 'hdmidet' command"
78 This enables the 'hdmidet' command which detects if an HDMI monitor
82 bool "i.MX6 NAND Boot Control Block(BCB) command"
83 depends on NAND && CMD_MTDPARTS
84 select BCH if MX6UL || MX6ULL
85 default y if ARCH_MX6 && NAND_MXS
87 Unlike normal 'nand write/erase' commands, this command update
88 Boot Control Block(BCB) for i.MX6 platform NAND IP's.
90 This is similar to kobs-ng, which is used in Linux as separate
93 config NXP_BOARD_REVISION
94 bool "Read NXP board revision from fuses"
95 depends on ARCH_MX6 || ARCH_MX7
97 NXP boards based on i.MX6/7 contain the board revision information
98 stored in the fuses. Select this option if you want to be able to
99 retrieve the board revision information.
101 config DDRMC_VF610_CALIBRATION
102 bool "Enable DDRMC (DDR3) on-chip calibration"
103 depends on ARCH_VF610
105 Vybrid (vf610) SoC provides some on-chip facility to tune the DDR3
106 memory parameters. Select this option if you want to calculate them
109 NXP does NOT recommend to perform this calibration at each boot. One
110 shall perform it on a new PCB and then use those values to program
111 the ddrmc_cr_setting on relevant board file.