arch/arm/lib/bootm.c

   1 /* Copyright (C) 2011
   2  * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
   3  *  - Added prep subcommand support
   4  *  - Reorganized source - modeled after powerpc version
   5  *
   6  * (C) Copyright 2002
   7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   8  * Marius Groeger <mgroeger@sysgo.de>
   9  *
  10  * Copyright (C) 2001  Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #include <common.h>
  16 #include <command.h>
  17 #include <image.h>
  18 #include <u-boot/zlib.h>
  19 #include <asm/byteorder.h>
  20 #include <libfdt.h>
  21 #include <mapmem.h>
  22 #include <fdt_support.h>
  23 #include <asm/bootm.h>
  24 #include <asm/secure.h>
  25 #include <linux/compiler.h>
  26 #include <bootm.h>
  27 #include <vxworks.h>
  28
  29 #ifdef CONFIG_ARMV7_NONSEC
  30 #include <asm/armv7.h>
  31 #endif
  32
  33 DECLARE_GLOBAL_DATA_PTR;
  34
  35 static struct tag *params;
  36
  37 static ulong get_sp(void)
  38 {
  39         ulong ret;
  40
  41         asm("mov %0, sp" : "=r"(ret) : );
  42         return ret;
  43 }
  44
  45 void arch_lmb_reserve(struct lmb *lmb)
  46 {
  47         ulong sp;
  48
  49         /*
  50          * Booting a (Linux) kernel image
  51          *
  52          * Allocate space for command line and board info - the
  53          * address should be as high as possible within the reach of
  54          * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
  55          * memory, which means far enough below the current stack
  56          * pointer.
  57          */
  58         sp = get_sp();
  59         debug("## Current stack ends at 0x%08lx ", sp);
  60
  61         /* adjust sp by 4K to be safe */
  62         sp -= 4096;
  63         lmb_reserve(lmb, sp,
  64                     gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
  65 }
  66
  67 __weak void board_quiesce_devices(void)
  68 {
  69 }
  70
  71 /**
  72  * announce_and_cleanup() - Print message and prepare for kernel boot
  73  *
  74  * @fake: non-zero to do everything except actually boot
  75  */
  76 static void announce_and_cleanup(int fake)
  77 {
  78         printf("\nStarting kernel ...%s\n\n", fake ?
  79                 "(fake run for tracing)" : "");
  80         bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
  81 #ifdef CONFIG_BOOTSTAGE_FDT
  82         bootstage_fdt_add_report();
  83 #endif
  84 #ifdef CONFIG_BOOTSTAGE_REPORT
  85         bootstage_report();
  86 #endif
  87
  88 #ifdef CONFIG_USB_DEVICE
  89         udc_disconnect();
  90 #endif
  91
  92         board_quiesce_devices();
  93
  94         cleanup_before_linux();
  95 }
  96
  97 static void setup_start_tag (bd_t *bd)
  98 {
  99         params = (struct tag *)bd->bi_boot_params;
 100
 101         params->hdr.tag = ATAG_CORE;
 102         params->hdr.size = tag_size (tag_core);
 103
 104         params->u.core.flags = 0;
 105         params->u.core.pagesize = 0;
 106         params->u.core.rootdev = 0;
 107
 108         params = tag_next (params);
 109 }
 110
 111 static void setup_memory_tags(bd_t *bd)
 112 {
 113         int i;
 114
 115         for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 116                 params->hdr.tag = ATAG_MEM;
 117                 params->hdr.size = tag_size (tag_mem32);
 118
 119                 params->u.mem.start = bd->bi_dram[i].start;
 120                 params->u.mem.size = bd->bi_dram[i].size;
 121
 122                 params = tag_next (params);
 123         }
 124 }
 125
 126 static void setup_commandline_tag(bd_t *bd, char *commandline)
 127 {
 128         char *p;
 129
 130         if (!commandline)
 131                 return;
 132
 133         /* eat leading white space */
 134         for (p = commandline; *p == ' '; p++);
 135
 136         /* skip non-existent command lines so the kernel will still
 137          * use its default command line.
 138          */
 139         if (*p == '\0')
 140                 return;
 141
 142         params->hdr.tag = ATAG_CMDLINE;
 143         params->hdr.size =
 144                 (sizeof (struct tag_header) + strlen (p) + 1 + 4) >> 2;
 145
 146         strcpy (params->u.cmdline.cmdline, p);
 147
 148         params = tag_next (params);
 149 }
 150
 151 static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end)
 152 {
 153         /* an ATAG_INITRD node tells the kernel where the compressed
 154          * ramdisk can be found. ATAG_RDIMG is a better name, actually.
 155          */
 156         params->hdr.tag = ATAG_INITRD2;
 157         params->hdr.size = tag_size (tag_initrd);
 158
 159         params->u.initrd.start = initrd_start;
 160         params->u.initrd.size = initrd_end - initrd_start;
 161
 162         params = tag_next (params);
 163 }
 164
 165 static void setup_serial_tag(struct tag **tmp)
 166 {
 167         struct tag *params = *tmp;
 168         struct tag_serialnr serialnr;
 169
 170         get_board_serial(&serialnr);
 171         params->hdr.tag = ATAG_SERIAL;
 172         params->hdr.size = tag_size (tag_serialnr);
 173         params->u.serialnr.low = serialnr.low;
 174         params->u.serialnr.high= serialnr.high;
 175         params = tag_next (params);
 176         *tmp = params;
 177 }
 178
 179 static void setup_revision_tag(struct tag **in_params)
 180 {
 181         u32 rev = 0;
 182
 183         rev = get_board_rev();
 184         params->hdr.tag = ATAG_REVISION;
 185         params->hdr.size = tag_size (tag_revision);
 186         params->u.revision.rev = rev;
 187         params = tag_next (params);
 188 }
 189
 190 static void setup_end_tag(bd_t *bd)
 191 {
 192         params->hdr.tag = ATAG_NONE;
 193         params->hdr.size = 0;
 194 }
 195
 196 __weak void setup_board_tags(struct tag **in_params) {}
 197
 198 #ifdef CONFIG_ARM64
 199 static void do_nonsec_virt_switch(void)
 200 {
 201         smp_kick_all_cpus();
 202         dcache_disable();       /* flush cache before swtiching to EL2 */
 203 }
 204 #endif
 205
 206 /* Subcommand: PREP */
 207 static void boot_prep_linux(bootm_headers_t *images)
 208 {
 209         char *commandline = getenv("bootargs");
 210
 211         if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) {
 212 #ifdef CONFIG_OF_LIBFDT
 213                 debug("using: FDT\n");
 214                 if (image_setup_linux(images)) {
 215                         printf("FDT creation failed! hanging...");
 216                         hang();
 217                 }
 218 #endif
 219         } else if (BOOTM_ENABLE_TAGS) {
 220                 debug("using: ATAGS\n");
 221                 setup_start_tag(gd->bd);
 222                 if (BOOTM_ENABLE_SERIAL_TAG)
 223                         setup_serial_tag(&params);
 224                 if (BOOTM_ENABLE_CMDLINE_TAG)
 225                         setup_commandline_tag(gd->bd, commandline);
 226                 if (BOOTM_ENABLE_REVISION_TAG)
 227                         setup_revision_tag(&params);
 228                 if (BOOTM_ENABLE_MEMORY_TAGS)
 229                         setup_memory_tags(gd->bd);
 230                 if (BOOTM_ENABLE_INITRD_TAG) {
 231                         /*
 232                          * In boot_ramdisk_high(), it may relocate ramdisk to
 233                          * a specified location. And set images->initrd_start &
 234                          * images->initrd_end to relocated ramdisk's start/end
 235                          * addresses. So use them instead of images->rd_start &
 236                          * images->rd_end when possible.
 237                          */
 238                         if (images->initrd_start && images->initrd_end) {
 239                                 setup_initrd_tag(gd->bd, images->initrd_start,
 240                                                  images->initrd_end);
 241                         } else if (images->rd_start && images->rd_end) {
 242                                 setup_initrd_tag(gd->bd, images->rd_start,
 243                                                  images->rd_end);
 244                         }
 245                 }
 246                 setup_board_tags(&params);
 247                 setup_end_tag(gd->bd);
 248         } else {
 249                 printf("FDT and ATAGS support not compiled in - hanging\n");
 250                 hang();
 251         }
 252 }
 253
 254 __weak bool armv7_boot_nonsec_default(void)
 255 {
 256 #ifdef CONFIG_ARMV7_BOOT_SEC_DEFAULT
 257         return false;
 258 #else
 259         return true;
 260 #endif
 261 }
 262
 263 #ifdef CONFIG_ARMV7_NONSEC
 264 bool armv7_boot_nonsec(void)
 265 {
 266         char *s = getenv("bootm_boot_mode");
 267         bool nonsec = armv7_boot_nonsec_default();
 268
 269         if (s && !strcmp(s, "sec"))
 270                 nonsec = false;
 271
 272         if (s && !strcmp(s, "nonsec"))
 273                 nonsec = true;
 274
 275         return nonsec;
 276 }
 277 #endif
 278
 279 #ifdef CONFIG_ARM64
 280 __weak void update_os_arch_secondary_cores(uint8_t os_arch)
 281 {
 282 }
 283
 284 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
 285 static void switch_to_el1(void)
 286 {
 287         if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
 288             (images.os.arch == IH_ARCH_ARM))
 289                 armv8_switch_to_el1(0, (u64)gd->bd->bi_arch_number,
 290                                     (u64)images.ft_addr,
 291                                     (u64)images.ep,
 292                                     ES_TO_AARCH32);
 293         else
 294                 armv8_switch_to_el1((u64)images.ft_addr, 0, 0,
 295                                     images.ep,
 296                                     ES_TO_AARCH64);
 297 }
 298 #endif
 299 #endif
 300
 301 /* Subcommand: GO */
 302 static void boot_jump_linux(bootm_headers_t *images, int flag)
 303 {
 304 #ifdef CONFIG_ARM64
 305         void (*kernel_entry)(void *fdt_addr, void *res0, void *res1,
 306                         void *res2);
 307         int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
 308
 309         kernel_entry = (void (*)(void *fdt_addr, void *res0, void *res1,
 310                                 void *res2))images->ep;
 311
 312         debug("## Transferring control to Linux (at address %lx)...\n",
 313                 (ulong) kernel_entry);
 314         bootstage_mark(BOOTSTAGE_ID_RUN_OS);
 315
 316         announce_and_cleanup(fake);
 317
 318         if (!fake) {
 319                 do_nonsec_virt_switch();
 320
 321                 update_os_arch_secondary_cores(images->os.arch);
 322
 323 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
 324                 armv8_switch_to_el2((u64)images->ft_addr, 0, 0,
 325                                     (u64)switch_to_el1, ES_TO_AARCH64);
 326 #else
 327                 if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) &&
 328                     (images->os.arch == IH_ARCH_ARM))
 329                         armv8_switch_to_el2(0, (u64)gd->bd->bi_arch_number,
 330                                             (u64)images->ft_addr,
 331                                             (u64)images->ep,
 332                                             ES_TO_AARCH32);
 333                 else
 334                         armv8_switch_to_el2((u64)images->ft_addr, 0, 0,
 335                                             images->ep,
 336                                             ES_TO_AARCH64);
 337 #endif
 338         }
 339 #else
 340         unsigned long machid = gd->bd->bi_arch_number;
 341         char *s;
 342         void (*kernel_entry)(int zero, int arch, uint params);
 343         unsigned long r2;
 344         int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
 345
 346         kernel_entry = (void (*)(int, int, uint))images->ep;
 347
 348         s = getenv("machid");
 349         if (s) {
 350                 if (strict_strtoul(s, 16, &machid) < 0) {
 351                         debug("strict_strtoul failed!\n");
 352                         return;
 353                 }
 354                 printf("Using machid 0x%lx from environment\n", machid);
 355         }
 356
 357         debug("## Transferring control to Linux (at address %08lx)" \
 358                 "...\n", (ulong) kernel_entry);
 359         bootstage_mark(BOOTSTAGE_ID_RUN_OS);
 360         announce_and_cleanup(fake);
 361
 362         if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len)
 363                 r2 = (unsigned long)images->ft_addr;
 364         else
 365                 r2 = gd->bd->bi_boot_params;
 366
 367         if (!fake) {
 368 #ifdef CONFIG_ARMV7_NONSEC
 369                 if (armv7_boot_nonsec()) {
 370                         armv7_init_nonsec();
 371                         secure_ram_addr(_do_nonsec_entry)(kernel_entry,
 372                                                           0, machid, r2);
 373                 } else
 374 #endif
 375                         kernel_entry(0, machid, r2);
 376         }
 377 #endif
 378 }
 379
 380 /* Main Entry point for arm bootm implementation
 381  *
 382  * Modeled after the powerpc implementation
 383  * DIFFERENCE: Instead of calling prep and go at the end
 384  * they are called if subcommand is equal 0.
 385  */
 386 int do_bootm_linux(int flag, int argc, char * const argv[],
 387                    bootm_headers_t *images)
 388 {
 389         /* No need for those on ARM */
 390         if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE)
 391                 return -1;
 392
 393         if (flag & BOOTM_STATE_OS_PREP) {
 394                 boot_prep_linux(images);
 395                 return 0;
 396         }
 397
 398         if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) {
 399                 boot_jump_linux(images, flag);
 400                 return 0;
 401         }
 402
 403         boot_prep_linux(images);
 404         boot_jump_linux(images, flag);
 405         return 0;
 406 }
 407
 408 #if defined(CONFIG_BOOTM_VXWORKS)
 409 void boot_prep_vxworks(bootm_headers_t *images)
 410 {
 411 #if defined(CONFIG_OF_LIBFDT)
 412         int off;
 413
 414         if (images->ft_addr) {
 415                 off = fdt_path_offset(images->ft_addr, "/memory");
 416                 if (off < 0) {
 417 #ifdef CONFIG_ARCH_FIXUP_FDT
 418                         if (arch_fixup_fdt(images->ft_addr))
 419                                 puts("## WARNING: fixup memory failed!\n");
 420 #endif
 421                 }
 422         }
 423 #endif
 424         cleanup_before_linux();
 425 }
 426 void boot_jump_vxworks(bootm_headers_t *images)
 427 {
 428         /* ARM VxWorks requires device tree physical address to be passed */
 429         ((void (*)(void *))images->ep)(images->ft_addr);
 430 }
 431 #endif