1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
5 #ifndef __ASM_ARCH_MXC_MXC_I2C_H__
6 #define __ASM_ARCH_MXC_MXC_I2C_H__
7 #include <asm-generic/gpio.h>
8 #include <asm/mach-imx/iomux-v3.h>
9 #if CONFIG_IS_ENABLED(CLK)
14 iomux_v3_cfg_t i2c_mode;
15 iomux_v3_cfg_t gpio_mode;
20 struct i2c_pads_info {
21 struct i2c_pin_ctrl scl;
22 struct i2c_pin_ctrl sda;
26 * Information about i2c controller
27 * struct mxc_i2c_bus - information about the i2c[x] bus
28 * @index: i2c bus index
29 * @base: Address of I2C bus controller
30 * @driver_data: Flags for different platforms, such as I2C_QUIRK_FLAG.
31 * @speed: Speed of I2C bus
32 * @pads_info: pinctrl info for this i2c bus, will be used when pinctrl is ok.
33 * The following two is only to be compatible with non-DM part.
34 * @idle_bus_fn: function to force bus idle
35 * @idle_bus_data: parameter for idle_bus_fun
37 * bus: The device structure for i2c bus controller
38 * scl-gpio: specify the gpio related to SCL pin
39 * sda-gpio: specify the gpio related to SDA pin
43 * board file can use this index to locate which i2c_pads_info is for
44 * i2c_idle_bus. When pinmux is implement, this entry can be
45 * discarded. Here we do not use dev->seq, because we do not want to
46 * export device to board file.
52 struct i2c_pads_info *pads_info;
53 #if CONFIG_IS_ENABLED(CLK)
57 int (*idle_bus_fn)(void *p);
61 /* Use gpio to force bus idle when bus state is abnormal */
62 struct gpio_desc scl_gpio;
63 struct gpio_desc sda_gpio;
67 #if defined(CONFIG_MX6QDL)
68 #define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
69 struct i2c_pads_info mx6q_##name = { \
71 .i2c_mode = MX6Q_##scl_i2c, \
72 .gpio_mode = MX6Q_##scl_gpio, \
76 .i2c_mode = MX6Q_##sda_i2c, \
77 .gpio_mode = MX6Q_##sda_gpio, \
81 struct i2c_pads_info mx6s_##name = { \
83 .i2c_mode = MX6DL_##scl_i2c, \
84 .gpio_mode = MX6DL_##scl_gpio, \
88 .i2c_mode = MX6DL_##sda_i2c, \
89 .gpio_mode = MX6DL_##sda_gpio, \
95 #define I2C_PADS_INFO(name) \
96 (is_mx6dq() || is_mx6dqp()) ? &mx6q_##name : &mx6s_##name
99 int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
100 struct i2c_pads_info *p);
101 void bus_i2c_init(int index, int speed, int slave_addr,
102 int (*idle_bus_fn)(void *p), void *p);
103 int force_idle_bus(void *priv);
104 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus);