powerpc: mpc5200: Correct return value of memcpy function
[platform/kernel/u-boot.git] / arch / arm / include / asm / arch-stm32f7 / rcc.h
1 /*
2  * (C) Copyright 2016
3  * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef _STM32_RCC_H
9 #define _STM32_RCC_H
10
11 #define RCC_CR          0x00    /* clock control */
12 #define RCC_PLLCFGR     0x04    /* PLL configuration */
13 #define RCC_CFGR        0x08    /* clock configuration */
14 #define RCC_CIR         0x0C    /* clock interrupt */
15 #define RCC_AHB1RSTR    0x10    /* AHB1 peripheral reset */
16 #define RCC_AHB2RSTR    0x14    /* AHB2 peripheral reset */
17 #define RCC_AHB3RSTR    0x18    /* AHB3 peripheral reset */
18 #define RCC_APB1RSTR    0x20    /* APB1 peripheral reset */
19 #define RCC_APB2RSTR    0x24    /* APB2 peripheral reset */
20 #define RCC_AHB1ENR     0x30    /* AHB1 peripheral clock enable */
21 #define RCC_AHB2ENR     0x34    /* AHB2 peripheral clock enable */
22 #define RCC_AHB3ENR     0x38    /* AHB3 peripheral clock enable */
23 #define RCC_APB1ENR     0x40    /* APB1 peripheral clock enable */
24 #define RCC_APB2ENR     0x44    /* APB2 peripheral clock enable */
25 #define RCC_AHB1LPENR   0x50    /* periph clk enable in low pwr mode */
26 #define RCC_AHB2LPENR   0x54    /* AHB2 periph clk enable in low pwr mode */
27 #define RCC_AHB3LPENR   0x58    /* AHB3 periph clk enable in low pwr mode */
28 #define RCC_APB1LPENR   0x60    /* APB1 periph clk enable in low pwr mode */
29 #define RCC_APB2LPENR   0x64    /* APB2 periph clk enable in low pwr mode */
30 #define RCC_BDCR        0x70    /* Backup domain control */
31 #define RCC_CSR         0x74    /* clock control & status */
32 #define RCC_SSCGR       0x80    /* spread spectrum clock generation */
33 #define RCC_PLLI2SCFGR  0x84    /* PLLI2S configuration */
34 #define RCC_PLLSAICFG   0x88    /* PLLSAI configuration */
35 #define RCC_DCKCFG1     0x8C    /* dedicated clocks configuration register */
36 #define RCC_DCKCFG2     0x90    /* dedicated clocks configuration register */
37
38 #define RCC_APB1ENR_TIM2EN              (1 << 0)
39 #define RCC_APB1ENR_PWREN               (1 << 28)
40
41 /*
42  * RCC USART specific definitions
43  */
44 #define RCC_ENR_USART1EN                (1 << 4)
45 #define RCC_ENR_USART2EN                (1 << 17)
46 #define RCC_ENR_USART3EN                (1 << 18)
47 #define RCC_ENR_USART6EN                (1 <<  5)
48
49 /*
50  * RCC GPIO specific definitions
51  */
52 #define RCC_ENR_GPIO_A_EN               (1 << 0)
53 #define RCC_ENR_GPIO_B_EN               (1 << 1)
54 #define RCC_ENR_GPIO_C_EN               (1 << 2)
55 #define RCC_ENR_GPIO_D_EN               (1 << 3)
56 #define RCC_ENR_GPIO_E_EN               (1 << 4)
57 #define RCC_ENR_GPIO_F_EN               (1 << 5)
58 #define RCC_ENR_GPIO_G_EN               (1 << 6)
59 #define RCC_ENR_GPIO_H_EN               (1 << 7)
60 #define RCC_ENR_GPIO_I_EN               (1 << 8)
61 #define RCC_ENR_GPIO_J_EN               (1 << 9)
62 #define RCC_ENR_GPIO_K_EN               (1 << 10)
63
64 #endif