2 * Based on Linux i.MX iomux-v3.h file:
3 * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
6 * Copyright (C) 2016 Freescale Semiconductor, Inc.
8 * SPDX-License-Identifier: GPL-2.0+
11 #ifndef __MACH_IOMUX_H__
12 #define __MACH_IOMUX_H__
15 * build IOMUX_PAD structure
17 * This iomux scheme is based around pads, which are the physical balls
20 * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
21 * things like driving strength and pullup/pulldown.
22 * - Each pad can have but not necessarily does have an output routing register
23 * (IOMUXC_SW_MUX_CTL_PAD_x).
24 * - Each pad can have but not necessarily does have an input routing register
25 * (IOMUXC_x_SELECT_INPUT)
27 * The three register sets do not have a fixed offset to each other,
28 * hence we order this table by pad control registers (which all pads
29 * have) and put the optional i/o routing registers into additional
32 * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
33 * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
35 * IOMUX/PAD Bit field definitions
37 * MUX_CTRL_OFS: 0..15 (16)
38 * SEL_INPUT_OFS: 16..31 (16)
39 * MUX_MODE: 32..37 (6)
41 * PAD_CTRL + NO_PAD_CTRL: 42..60 (19)
45 typedef u64 iomux_cfg_t;
47 #define MUX_CTRL_OFS_SHIFT 0
48 #define MUX_CTRL_OFS_MASK ((iomux_cfg_t)0xffff << MUX_CTRL_OFS_SHIFT)
49 #define MUX_SEL_INPUT_OFS_SHIFT 16
50 #define MUX_SEL_INPUT_OFS_MASK ((iomux_cfg_t)0xffff << \
51 MUX_SEL_INPUT_OFS_SHIFT)
53 #define MUX_MODE_SHIFT 32
54 #define MUX_MODE_MASK ((iomux_cfg_t)0x3f << MUX_MODE_SHIFT)
55 #define MUX_SEL_INPUT_SHIFT 38
56 #define MUX_SEL_INPUT_MASK ((iomux_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
57 #define MUX_PAD_CTRL_SHIFT 42
58 #define MUX_PAD_CTRL_MASK ((iomux_cfg_t)0x7ffff << MUX_PAD_CTRL_SHIFT)
60 #define MUX_PAD_CTRL(x) ((iomux_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
62 #define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs, \
63 sel_input, pad_ctrl) \
64 (((iomux_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
65 ((iomux_cfg_t)(mux_mode) << MUX_MODE_SHIFT) | \
66 ((iomux_cfg_t)(pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
67 ((iomux_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \
68 ((iomux_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT))
70 #define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | \
74 #define IOMUX_CONFIG_MPORTS 0x20
75 #define MUX_MODE_MPORTS ((iomux_v3_cfg_t)IOMUX_CONFIG_MPORTS << \
78 /* Bit definition below needs to be fixed acccording to ulp rm */
80 #define NO_PAD_CTRL (1 << 18)
81 #define PAD_CTL_OBE_ENABLE (1 << 17)
82 #define PAD_CTL_IBE_ENABLE (1 << 16)
83 #define PAD_CTL_DSE (1 << 6)
84 #define PAD_CTL_ODE (1 << 5)
85 #define PAD_CTL_SRE_FAST (0 << 2)
86 #define PAD_CTL_SRE_SLOW (1 << 2)
87 #define PAD_CTL_PUE (1 << 1)
88 #define PAD_CTL_PUS_UP ((1 << 0) | PAD_CTL_PUE)
89 #define PAD_CTL_PUS_DOWN ((0 << 0) | PAD_CTL_PUE)
92 void mx7ulp_iomux_setup_pad(iomux_cfg_t pad);
93 void mx7ulp_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list,
95 #endif /* __MACH_IOMUX_H__*/