arch/arm/dts/zynqmp-m-a2197-03-revA.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * dts file for Xilinx Versal a2197 RevA System Controller
   4  *
   5  * (C) Copyright 2019, Xilinx, Inc.
   6  *
   7  * Michal Simek <michal.simek@xilinx.com>
   8  */
   9 /dts-v1/;
  10
  11 #include "zynqmp.dtsi"
  12 #include "zynqmp-clk-ccf.dtsi"
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         model = "Versal System Controller on a2197 Memory Char board RevA";
  17         compatible = "xlnx,zynqmp-m-a2197-03-revA", "xlnx,zynqmp-a2197-revA",
  18                      "xlnx,zynqmp-a2197", "xlnx,zynqmp";
  19
  20         aliases {
  21                 ethernet0 = &gem0;
  22                 gpio0 = &gpio;
  23                 i2c0 = &i2c0;
  24                 i2c1 = &i2c1;
  25                 mmc0 = &sdhci0;
  26                 mmc1 = &sdhci1;
  27                 rtc0 = &rtc;
  28                 serial0 = &uart0;
  29                 serial1 = &uart1;
  30                 serial2 = &dcc;
  31                 usb0 = &usb0;
  32                 usb1 = &usb1;
  33                 spi0 = &qspi;
  34         };
  35
  36         chosen {
  37                 bootargs = "earlycon";
  38                 stdout-path = "serial0:115200n8";
  39                 xlnx,eeprom = <&eeprom>;
  40         };
  41
  42         memory@0 {
  43                 device_type = "memory";
  44                 reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */
  45         };
  46
  47         ina226-vcc-aux {
  48                 compatible = "iio-hwmon";
  49                 io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>;
  50         };
  51         ina226-vcc-ram {
  52                 compatible = "iio-hwmon";
  53                 io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
  54         };
  55         ina226-vcc1v1-lp4 {
  56                 compatible = "iio-hwmon";
  57                 io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
  58         };
  59         ina226-vcc1v2-lp4 {
  60                 compatible = "iio-hwmon";
  61                 io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>;
  62         };
  63         ina226-vdd1-1v8-lp4 {
  64                 compatible = "iio-hwmon";
  65                 io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>;
  66         };
  67 };
  68
  69 &qspi {
  70         status = "okay";
  71         is-dual = <1>;
  72         flash@0 {
  73                 compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76                 reg = <0x0>;
  77                 spi-tx-bus-width = <1>;
  78                 spi-rx-bus-width = <4>;
  79                 spi-max-frequency = <108000000>;
  80         };
  81 };
  82
  83 &sdhci0 { /* emmc MIO 13-23 - with some settings  16GB */
  84         status = "okay";
  85         non-removable;
  86         disable-wp;
  87         bus-width = <8>;
  88         xlnx,mio_bank = <0>; /* FIXME tap delay */
  89 };
  90
  91 &uart0 { /* uart0 MIO38-39 */
  92         status = "okay";
  93         u-boot,dm-pre-reloc;
  94 };
  95
  96 &uart1 { /* uart1 MIO40-41 */
  97         status = "okay";
  98         u-boot,dm-pre-reloc;
  99 };
 100
 101 &sdhci1 { /* sd1 MIO45-51 cd in place */
 102         status = "disable";
 103         no-1-8-v;
 104         disable-wp;
 105         xlnx,mio_bank = <1>;
 106 };
 107
 108 &gem0 {
 109         status = "okay";
 110         phy-handle = <&phy0>;
 111         phy-mode = "sgmii";
 112         phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
 113         phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
 114                 reg = <0>;
 115         };
 116 };
 117
 118 &gpio {
 119         status = "okay";
 120         gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */
 121                   "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */
 122                   "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
 123                   "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
 124                   "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
 125                   "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */
 126                   "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
 127                   "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
 128                   "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
 129                   "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
 130                   "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
 131                   "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
 132                   "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
 133                   "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
 134                   "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
 135                   "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
 136                   "", "", "", "", "", /* 78 - 79 */
 137                   "", "", "", "", "", /* 80 - 84 */
 138                   "", "", "", "", "", /* 85 -89 */
 139                   "", "", "", "", "", /* 90 - 94 */
 140                   "", "", "", "", "", /* 95 - 99 */
 141                   "", "", "", "", "", /* 100 - 104 */
 142                   "", "", "", "", "", /* 105 - 109 */
 143                   "", "", "", "", "", /* 110 - 114 */
 144                   "", "", "", "", "", /* 115 - 119 */
 145                   "", "", "", "", "", /* 120 - 124 */
 146                   "", "", "", "", "", /* 125 - 129 */
 147                   "", "", "", "", "", /* 130 - 134 */
 148                   "", "", "", "", "", /* 135 - 139 */
 149                   "", "", "", "", "", /* 140 - 144 */
 150                   "", "", "", "", "", /* 145 - 149 */
 151                   "", "", "", "", "", /* 150 - 154 */
 152                   "", "", "", "", "", /* 155 - 159 */
 153                   "", "", "", "", "", /* 160 - 164 */
 154                   "", "", "", "", "", /* 165 - 169 */
 155                   "", "", "", ""; /* 170 - 174 */
 156 };
 157
 158 &i2c0 { /* MIO 34-35 - can't stay here */
 159         status = "okay";
 160         clock-frequency = <400000>;
 161         i2c-mux@74 { /* u46 */
 162                 compatible = "nxp,pca9548";
 163                 #address-cells = <1>;
 164                 #size-cells = <0>;
 165                 reg = <0x74>;
 166                 /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
 167                 i2c@0 { /* PMBUS  must be enabled via SW21 */
 168                         #address-cells = <1>;
 169                         #size-cells = <0>;
 170                         reg = <0>;
 171                         reg_vcc1v2_lp4: tps544@15 { /* u97 */
 172                                 compatible = "ti,tps544b25";
 173                                 reg = <0x15>;
 174                         };
 175                         reg_vcc1v1_lp4: tps544@16 { /* u95 */
 176                                 compatible = "ti,tps544b25";
 177                                 reg = <0x16>;
 178                         };
 179                         reg_vdd1_1v8_lp4: tps544@17 { /* u99 */
 180                                 compatible = "ti,tps544b25";
 181                                 reg = <0x17>;
 182                         };
 183                         /* UTIL_PMBUS connection */
 184                         reg_vcc1v8: tps544@13 { /* u92 */
 185                                 compatible = "ti,tps544b25";
 186                                 reg = <0x13>;
 187                         };
 188                         reg_vcc3v3: tps544@14 { /* u93 */
 189                                 compatible = "ti,tps544b25";
 190                                 reg = <0x14>;
 191                         };
 192                         reg_vcc5v0: tps544@1e { /* u94 */
 193                                 compatible = "ti,tps544b25";
 194                                 reg = <0x1e>;
 195                         };
 196                         reg_vpp_2v5_ddr4: tps544@1x { /* u3007 */
 197                                 compatible = "ti,tps544b25";
 198                                 reg = <0x17>; /* FIXME wrong in schematics */
 199                         };
 200                 };
 201                 i2c@1 { /* PMBUS_INA226 */
 202                         #address-cells = <1>;
 203                         #size-cells = <0>;
 204                         reg = <1>;
 205                         vcc_aux: ina226@42 { /* u86 */
 206                                 compatible = "ti,ina226";
 207                                 #io-channel-cells = <1>;
 208                                 label = "ina226-vcc-aux";
 209                                 reg = <0x42>;
 210                                 shunt-resistor = <5000>;
 211                         };
 212                         vcc_ram: ina226@43 { /* u81 */
 213                                 compatible = "ti,ina226";
 214                                 #io-channel-cells = <1>;
 215                                 label = "ina226-vcc-ram";
 216                                 reg = <0x43>;
 217                                 shunt-resistor = <5000>;
 218                         };
 219                         vcc1v1_lp4: ina226@46 { /* u96 */
 220                                 compatible = "ti,ina226";
 221                                 #io-channel-cells = <1>;
 222                                 label = "ina226-vcc1v1-lp4";
 223                                 reg = <0x46>;
 224                                 shunt-resistor = <5000>;
 225                         };
 226                         vcc1v2_lp4: ina226@47 { /* u98 */
 227                                 compatible = "ti,ina226";
 228                                 #io-channel-cells = <1>;
 229                                 label = "ina226-vcc1v2-lp4";
 230                                 reg = <0x47>;
 231                                 shunt-resistor = <5000>;
 232                         };
 233                         vdd1_1v8_lp4: ina226@48 { /* u100 */
 234                                 compatible = "ti,ina226";
 235                                 #io-channel-cells = <1>;
 236                                 label = "ina226-vdd1-1v8-lp4";
 237                                 reg = <0x48>;
 238                                 shunt-resistor = <5000>;
 239                         };
 240                 };
 241                 i2c@2 { /* PMBUS1 */
 242                         #address-cells = <1>;
 243                         #size-cells = <0>;
 244                         reg = <2>;
 245                         reg_vccint: tps53681@c0 { /* u69 */
 246                                 compatible = "ti,tps53681", "ti,tps53679";
 247                                 reg = <0xc0>;
 248                         };
 249                         reg_vcc_pmc: tps544@7 { /* u80 */
 250                                 compatible = "ti,tps544b25";
 251                                 reg = <0x7>;
 252                         };
 253                         reg_vcc_ram: tps544@8 { /* u82 */
 254                                 compatible = "ti,tps544b25";
 255                                 reg = <0x8>;
 256                         };
 257                         reg_vcc_pslp: tps544@9 { /* u83 */
 258                                 compatible = "ti,tps544b25";
 259                                 reg = <0x9>;
 260                         };
 261                         reg_vcc_psfp: tps544@a { /* u84 */
 262                                 compatible = "ti,tps544b25";
 263                                 reg = <0xa>;
 264                         };
 265                         reg_vccaux: tps544@d { /* u85 */
 266                                 compatible = "ti,tps544b25";
 267                                 reg = <0xd>;
 268                         };
 269                         reg_vccaux_pmc: tps544@e { /* u87 */
 270                                 compatible = "ti,tps544b25";
 271                                 reg = <0xe>;
 272                         };
 273                         reg_vcco_500: tps544@f { /* u88 */
 274                                 compatible = "ti,tps544b25";
 275                                 reg = <0xf>;
 276                         };
 277                         reg_vcco_501: tps544@10 { /* u89 */
 278                                 compatible = "ti,tps544b25";
 279                                 reg = <0x10>;
 280                         };
 281                         reg_vcco_502: tps544@11 { /* u90 */
 282                                 compatible = "ti,tps544b25";
 283                                 reg = <0x11>;
 284                         };
 285                         reg_vcco_503: tps544@12 { /* u91 */
 286                                 compatible = "ti,tps544b25";
 287                                 reg = <0x12>;
 288                         };
 289                 };
 290                 i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
 291                         #address-cells = <1>;
 292                         #size-cells = <0>;
 293                         /* reg = <3>; */
 294                 };
 295                 i2c@4 { /* LP_I2C_SM */
 296                         #address-cells = <1>;
 297                         #size-cells = <0>;
 298                         reg = <4>;
 299                         /* connected to U20G */
 300                 };
 301                 i2c@5 { /* DDR4_SODIMM */
 302                         #address-cells = <1>;
 303                         #size-cells = <0>;
 304                         reg = <5>;
 305                 };
 306         };
 307 };
 308
 309 /* TODO sysctrl via J239 */
 310 /* TODO samtec J212G/H via J242 */
 311 /* TODO teensy via U30 PCA9543A bus 1 */
 312 &i2c1 { /* i2c1 MIO 36-37 */
 313         status = "okay";
 314         clock-frequency = <400000>;
 315
 316         /* Must be enabled via J242 */
 317         eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
 318                 compatible = "atmel,24c02";
 319                 reg = <0x51>;
 320         };
 321
 322         i2c-mux@74 { /* u47 */
 323                 compatible = "nxp,pca9548";
 324                 #address-cells = <1>;
 325                 #size-cells = <0>;
 326                 reg = <0x74>;
 327                 /* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */
 328                 dc_i2c: i2c@0 { /* DC_I2C */
 329                         #address-cells = <1>;
 330                         #size-cells = <0>;
 331                         reg = <0>;
 332                         /* Use for storing information about SC board */
 333                         eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */
 334                                 compatible = "atmel,24c08";
 335                                 reg = <0x54>;
 336                         };
 337                         si570_ref_clk: clock-generator@5d { /* u26 */
 338                                 #clock-cells = <0>;
 339                                 compatible = "silabs,si570";
 340                                 reg = <0x5d>; /* FIXME addr */
 341                                 temperature-stability = <50>;
 342                                 factory-fout = <156250000>; /* FIXME every chip can be different */
 343                                 clock-frequency = <33333333>;
 344                                 clock-output-names = "REF_CLK"; /* FIXME */
 345                         };
 346                         /* Connection via Samtec U20D */
 347                         /* Use for storing information about X-PRC card */
 348                         x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
 349                                 compatible = "atmel,24c02";
 350                                 reg = <0x52>;
 351                         };
 352
 353                         /* Use for setting up certain features on X-PRC card */
 354                         x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
 355                                 compatible = "nxp,pca9534";
 356                                 reg = <0x22>;
 357                                 gpio-controller; /* IRQ not connected */
 358                                 #gpio-cells = <2>;
 359                                 gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 360                                                   "", "", "", "";
 361                                 gtr_sel0 {
 362                                         gpio-hog;
 363                                         gpios = <0 0>;
 364                                         input; /* FIXME add meaning */
 365                                         line-name = "sw4_1";
 366                                 };
 367                                 gtr_sel1 {
 368                                         gpio-hog;
 369                                         gpios = <1 0>;
 370                                         input; /* FIXME add meaning */
 371                                         line-name = "sw4_2";
 372                                 };
 373                                 gtr_sel2 {
 374                                         gpio-hog;
 375                                         gpios = <2 0>;
 376                                         input; /* FIXME add meaning */
 377                                         line-name = "sw4_3";
 378                                 };
 379                                 gtr_sel3 {
 380                                         gpio-hog;
 381                                         gpios = <3 0>;
 382                                         input; /* FIXME add meaning */
 383                                         line-name = "sw4_4";
 384                                 };
 385                         };
 386                 };
 387                 i2c@2 { /* C0_DDR4 */
 388                         #address-cells = <1>;
 389                         #size-cells = <0>;
 390                         reg = <2>;
 391                         si570_c0_ddr4: clock-generator@55 { /* u4 */
 392                                 #clock-cells = <0>;
 393                                 compatible = "silabs,si570";
 394                                 reg = <0x55>;
 395                                 temperature-stability = <50>;
 396                                 factory-fout = <30000000>;
 397                                 clock-frequency = <30000000>;
 398                                 clock-output-names = "C0_DD4_SI570_CLK";
 399                         };
 400                 };
 401                 i2c@3 { /* C1_SODIMM */
 402                         #address-cells = <1>;
 403                         #size-cells = <0>;
 404                         reg = <3>;
 405                         si570_c1_lp4: clock-generator@55 { /* u7 */
 406                                 #clock-cells = <0>;
 407                                 compatible = "silabs,si570";
 408                                 reg = <0x55>;
 409                                 temperature-stability = <50>;
 410                                 factory-fout = <30000000>;
 411                                 clock-frequency = <30000000>;
 412                                 clock-output-names = "C1_SODIMM_SI570_CLK";
 413                         };
 414                 };
 415                 i2c@4 { /* C2_QDRIV */
 416                         #address-cells = <1>;
 417                         #size-cells = <0>;
 418                         reg = <4>;
 419                         si570_c2_lp4: clock-generator@55 { /* u10 */
 420                                 #clock-cells = <0>;
 421                                 compatible = "silabs,si570";
 422                                 reg = <0x55>;
 423                                 temperature-stability = <50>;
 424                                 factory-fout = <30000000>;
 425                                 clock-frequency = <30000000>;
 426                                 clock-output-names = "C2_QDRIV_SI570_CLK";
 427                         };
 428                 };
 429                 i2c@5 { /* C3_DDR4 */
 430                         #address-cells = <1>;
 431                         #size-cells = <0>;
 432                         reg = <5>;
 433                         si570_c3_lp4: clock-generator@55 { /* u15 */
 434                                 #clock-cells = <0>;
 435                                 compatible = "silabs,si570";
 436                                 reg = <0x55>;
 437                                 temperature-stability = <50>;
 438                                 factory-fout = <30000000>;
 439                                 clock-frequency = <30000000>;
 440                                 clock-output-names = "C3_LP4_SI570_CLK";
 441                         };
 442                 };
 443                 i2c@6 { /* HSDP_SI570 */
 444                         #address-cells = <1>;
 445                         #size-cells = <0>;
 446                         reg = <6>;
 447                         si570_hsdp: clock-generator@5d { /* u19 */
 448                                 #clock-cells = <0>;
 449                                 compatible = "silabs,si570";
 450                                 reg = <0x5d>;
 451                                 temperature-stability = <50>;
 452                                 factory-fout = <156250000>;
 453                                 clock-frequency = <156250000>;
 454                                 clock-output-names = "HSDP_SI570";
 455                         };
 456                 };
 457         };
 458 };
 459
 460 &usb0 {
 461         status = "okay";
 462         xlnx,usb-polarity = <0>;
 463         xlnx,usb-reset-mode = <0>;
 464 };
 465
 466 &dwc3_0 {
 467         status = "okay";
 468         dr_mode = "host";
 469         /* dr_mode = "peripheral"; */
 470         maximum-speed = "high-speed";
 471 };
 472
 473 &usb1 {
 474         status = "disabled"; /* not at mem board */
 475         xlnx,usb-polarity = <0>;
 476         xlnx,usb-reset-mode = <0>;
 477 };
 478
 479 &dwc3_1 {
 480         /delete-property/ phy-names ;
 481         /delete-property/ phys ;
 482         maximum-speed = "high-speed";
 483         snps,dis_u2_susphy_quirk ;
 484         snps,dis_u3_susphy_quirk ;
 485         status = "disabled";
 486 };