arch/arm/dts/zynqmp-ep108.dts

   1 /*
   2  * dts file for Xilinx ZynqMP ep108 development board
   3  *
   4  * (C) Copyright 2014 - 2015, Xilinx, Inc.
   5  *
   6  * Michal Simek <michal.simek@xilinx.com>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "zynqmp.dtsi"
  14 #include "zynqmp-ep108-clk.dtsi"
  15
  16 / {
  17         model = "ZynqMP EP108";
  18
  19         aliases {
  20                 mmc0 = &sdhci0;
  21                 mmc1 = &sdhci1;
  22                 serial0 = &uart0;
  23                 spi0 = &qspi;
  24                 spi1 = &spi0;
  25                 spi2 = &spi1;
  26                 usb0 = &usb0;
  27                 usb1 = &usb1;
  28         };
  29
  30         chosen {
  31                 stdout-path = "serial0:115200n8";
  32         };
  33
  34         memory {
  35                 device_type = "memory";
  36                 reg = <0x0 0x0 0x0 0x40000000>;
  37         };
  38 };
  39
  40 &can0 {
  41         status = "okay";
  42 };
  43
  44 &gem0 {
  45         status = "okay";
  46         phy-handle = <&phy0>;
  47         phy-mode = "rgmii-id";
  48         phy0: phy@0 {
  49                 reg = <0>;
  50                 max-speed = <100>;
  51         };
  52 };
  53
  54 &gpio {
  55         status = "okay";
  56 };
  57
  58 &i2c0 {
  59         status = "okay";
  60         clock-frequency = <400000>;
  61         eeprom@54 {
  62                 compatible = "at,24c64";
  63                 reg = <0x54>;
  64         };
  65 };
  66
  67 &i2c1 {
  68         status = "okay";
  69         clock-frequency = <400000>;
  70         eeprom@55 {
  71                 compatible = "at,24c64";
  72                 reg = <0x55>;
  73         };
  74 };
  75
  76 &qspi {
  77         status = "okay";
  78         flash@0 {
  79                 compatible = "m25p80";
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82                 reg = <0x0>;
  83                 spi-tx-bus-width = <1>;
  84                 spi-rx-bus-width = <4>;
  85                 spi-max-frequency = <10000000>;
  86                 partition@qspi-fsbl-uboot { /* for testing purpose */
  87                         label = "qspi-fsbl-uboot";
  88                         reg = <0x0 0x100000>;
  89                 };
  90                 partition@qspi-linux { /* for testing purpose */
  91                         label = "qspi-linux";
  92                         reg = <0x100000 0x500000>;
  93                 };
  94                 partition@qspi-device-tree { /* for testing purpose */
  95                         label = "qspi-device-tree";
  96                         reg = <0x600000 0x20000>;
  97                 };
  98                 partition@qspi-rootfs { /* for testing purpose */
  99                         label = "qspi-rootfs";
 100                         reg = <0x620000 0x5E0000>;
 101                 };
 102         };
 103 };
 104
 105 &sata {
 106         status = "okay";
 107         ceva,broken-gen2;
 108 };
 109
 110 &sdhci0 {
 111         status = "okay";
 112         bus-width = <8>;
 113 };
 114
 115 &sdhci1 {
 116         status = "okay";
 117 };
 118
 119 &spi0 {
 120         status = "okay";
 121         num-cs = <1>;
 122         spi0_flash0: spi0_flash0@0 {
 123                 compatible = "m25p80";
 124                 #address-cells = <1>;
 125                 #size-cells = <1>;
 126                 spi-max-frequency = <50000000>;
 127                 reg = <0>;
 128
 129                 spi0_flash0@00000000 {
 130                         label = "spi0_flash0";
 131                         reg = <0x0 0x100000>;
 132                 };
 133         };
 134 };
 135
 136 &spi1 {
 137         status = "okay";
 138         num-cs = <1>;
 139         spi1_flash0: spi1_flash0@0 {
 140                 compatible = "m25p80";
 141                 #address-cells = <1>;
 142                 #size-cells = <1>;
 143                 spi-max-frequency = <50000000>;
 144                 reg = <0>;
 145
 146                 spi1_flash0@00000000 {
 147                         label = "spi1_flash0";
 148                         reg = <0x0 0x100000>;
 149                 };
 150         };
 151 };
 152
 153 &uart0 {
 154         status = "okay";
 155 };
 156
 157 &usb0 {
 158         status = "okay";
 159 };
 160
 161 &dwc3_0 {
 162         status = "okay";
 163         dr_mode = "peripheral";
 164         maximum-speed = "high-speed";
 165 };
 166
 167 &usb1 {
 168         status = "okay";
 169 };
 170
 171 &dwc3_1 {
 172         status = "okay";
 173         dr_mode = "host";
 174         maximum-speed = "high-speed";
 175 };
 176
 177 &watchdog0 {
 178         status = "okay";
 179 };
 180
 181 &xlnx_dp {
 182         xlnx,max-pclock-frequency = <200000>;
 183 };
 184
 185 &xlnx_dpdma {
 186         xlnx,axi-clock-freq = <200000000>;
 187 };