arch/arm/dts/zynq-zc770-xm010.dts

   1 /*
   2  * Xilinx ZC770 XM010 board DTS
   3  *
   4  * Copyright (C) 2013 - 2015 Xilinx, Inc.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 /dts-v1/;
   9 #include "zynq-7000.dtsi"
  10
  11 / {
  12         compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
  13         model = "Xilinx Zynq";
  14
  15         aliases {
  16                 ethernet0 = &gem0;
  17                 i2c0 = &i2c0;
  18                 serial0 = &uart1;
  19                 spi0 = &qspi;
  20                 spi1 = &spi1;
  21         };
  22
  23         chosen {
  24                 bootargs = "";
  25                 stdout-path = "serial0:115200n8";
  26         };
  27
  28         memory@0 {
  29                 device_type = "memory";
  30                 reg = <0x0 0x40000000>;
  31         };
  32
  33         usb_phy0: phy0 {
  34                 compatible = "usb-nop-xceiv";
  35                 #phy-cells = <0>;
  36         };
  37 };
  38
  39 &can0 {
  40         status = "okay";
  41 };
  42
  43 &gem0 {
  44         status = "okay";
  45         phy-mode = "rgmii-id";
  46         phy-handle = <&ethernet_phy>;
  47
  48         ethernet_phy: ethernet-phy@7 {
  49                 reg = <7>;
  50                 device_type = "ethernet-phy";
  51         };
  52 };
  53
  54 &i2c0 {
  55         status = "okay";
  56         clock-frequency = <400000>;
  57
  58         m24c02_eeprom@52 {
  59                 compatible = "at,24c02";
  60                 reg = <0x52>;
  61         };
  62
  63 };
  64
  65 &qspi {
  66         status = "okay";
  67 };
  68
  69 &sdhci0 {
  70         status = "okay";
  71 };
  72
  73 &spi1 {
  74         status = "okay";
  75         num-cs = <4>;
  76         is-decoded-cs = <0>;
  77         flash@0 {
  78                 compatible = "sst25wf080";
  79                 reg = <1>;
  80                 spi-max-frequency = <1000000>;
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 partition@test {
  84                         label = "spi-flash";
  85                         reg = <0x0 0x100000>;
  86                 };
  87         };
  88 };
  89
  90 &uart1 {
  91         u-boot,dm-pre-reloc;
  92         status = "okay";
  93 };
  94
  95 &usb0 {
  96         status = "okay";
  97         dr_mode = "host";
  98         usb-phy = <&usb_phy0>;
  99 };