arm: socfpga: Enable all FPGA config support for Arria 10
[platform/kernel/u-boot.git] / arch / arm / dts / uniphier-ld11.dtsi
1 /*
2  * Device Tree Source for UniPhier LD11 SoC
3  *
4  * Copyright (C) 2016 Socionext Inc.
5  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
6  *
7  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8  */
9
10 /memreserve/ 0x80000000 0x02000000;
11
12 / {
13         compatible = "socionext,uniphier-ld11";
14         #address-cells = <2>;
15         #size-cells = <2>;
16         interrupt-parent = <&gic>;
17
18         cpus {
19                 #address-cells = <2>;
20                 #size-cells = <0>;
21
22                 cpu-map {
23                         cluster0 {
24                                 core0 {
25                                         cpu = <&cpu0>;
26                                 };
27                                 core1 {
28                                         cpu = <&cpu1>;
29                                 };
30                         };
31                 };
32
33                 cpu0: cpu@0 {
34                         device_type = "cpu";
35                         compatible = "arm,cortex-a53", "arm,armv8";
36                         reg = <0 0x000>;
37                         clocks = <&sys_clk 33>;
38                         enable-method = "psci";
39                         operating-points-v2 = <&cluster0_opp>;
40                 };
41
42                 cpu1: cpu@1 {
43                         device_type = "cpu";
44                         compatible = "arm,cortex-a53", "arm,armv8";
45                         reg = <0 0x001>;
46                         clocks = <&sys_clk 33>;
47                         enable-method = "psci";
48                         operating-points-v2 = <&cluster0_opp>;
49                 };
50         };
51
52         cluster0_opp: opp_table {
53                 compatible = "operating-points-v2";
54                 opp-shared;
55
56                 opp-245000000 {
57                         opp-hz = /bits/ 64 <245000000>;
58                         clock-latency-ns = <300>;
59                 };
60                 opp-250000000 {
61                         opp-hz = /bits/ 64 <250000000>;
62                         clock-latency-ns = <300>;
63                 };
64                 opp-490000000 {
65                         opp-hz = /bits/ 64 <490000000>;
66                         clock-latency-ns = <300>;
67                 };
68                 opp-500000000 {
69                         opp-hz = /bits/ 64 <500000000>;
70                         clock-latency-ns = <300>;
71                 };
72                 opp-653334000 {
73                         opp-hz = /bits/ 64 <653334000>;
74                         clock-latency-ns = <300>;
75                 };
76                 opp-666667000 {
77                         opp-hz = /bits/ 64 <666667000>;
78                         clock-latency-ns = <300>;
79                 };
80                 opp-980000000 {
81                         opp-hz = /bits/ 64 <980000000>;
82                         clock-latency-ns = <300>;
83                 };
84         };
85
86         psci {
87                 compatible = "arm,psci-1.0";
88                 method = "smc";
89         };
90
91         clocks {
92                 refclk: ref {
93                         compatible = "fixed-clock";
94                         #clock-cells = <0>;
95                         clock-frequency = <25000000>;
96                 };
97         };
98
99         timer {
100                 compatible = "arm,armv8-timer";
101                 interrupts = <1 13 4>,
102                              <1 14 4>,
103                              <1 11 4>,
104                              <1 10 4>;
105         };
106
107         soc@0 {
108                 compatible = "simple-bus";
109                 #address-cells = <1>;
110                 #size-cells = <1>;
111                 ranges = <0 0 0 0xffffffff>;
112                 u-boot,dm-pre-reloc;
113
114                 serial0: serial@54006800 {
115                         compatible = "socionext,uniphier-uart";
116                         status = "disabled";
117                         reg = <0x54006800 0x40>;
118                         interrupts = <0 33 4>;
119                         pinctrl-names = "default";
120                         pinctrl-0 = <&pinctrl_uart0>;
121                         clocks = <&peri_clk 0>;
122                         clock-frequency = <58820000>;
123                 };
124
125                 serial1: serial@54006900 {
126                         compatible = "socionext,uniphier-uart";
127                         status = "disabled";
128                         reg = <0x54006900 0x40>;
129                         interrupts = <0 35 4>;
130                         pinctrl-names = "default";
131                         pinctrl-0 = <&pinctrl_uart1>;
132                         clocks = <&peri_clk 1>;
133                         clock-frequency = <58820000>;
134                 };
135
136                 serial2: serial@54006a00 {
137                         compatible = "socionext,uniphier-uart";
138                         status = "disabled";
139                         reg = <0x54006a00 0x40>;
140                         interrupts = <0 37 4>;
141                         pinctrl-names = "default";
142                         pinctrl-0 = <&pinctrl_uart2>;
143                         clocks = <&peri_clk 2>;
144                         clock-frequency = <58820000>;
145                 };
146
147                 serial3: serial@54006b00 {
148                         compatible = "socionext,uniphier-uart";
149                         status = "disabled";
150                         reg = <0x54006b00 0x40>;
151                         interrupts = <0 177 4>;
152                         pinctrl-names = "default";
153                         pinctrl-0 = <&pinctrl_uart3>;
154                         clocks = <&peri_clk 3>;
155                         clock-frequency = <58820000>;
156                 };
157
158                 i2c0: i2c@58780000 {
159                         compatible = "socionext,uniphier-fi2c";
160                         status = "disabled";
161                         reg = <0x58780000 0x80>;
162                         #address-cells = <1>;
163                         #size-cells = <0>;
164                         interrupts = <0 41 4>;
165                         pinctrl-names = "default";
166                         pinctrl-0 = <&pinctrl_i2c0>;
167                         clocks = <&peri_clk 4>;
168                         clock-frequency = <100000>;
169                 };
170
171                 i2c1: i2c@58781000 {
172                         compatible = "socionext,uniphier-fi2c";
173                         status = "disabled";
174                         reg = <0x58781000 0x80>;
175                         #address-cells = <1>;
176                         #size-cells = <0>;
177                         interrupts = <0 42 4>;
178                         pinctrl-names = "default";
179                         pinctrl-0 = <&pinctrl_i2c1>;
180                         clocks = <&peri_clk 5>;
181                         clock-frequency = <100000>;
182                 };
183
184                 i2c2: i2c@58782000 {
185                         compatible = "socionext,uniphier-fi2c";
186                         reg = <0x58782000 0x80>;
187                         #address-cells = <1>;
188                         #size-cells = <0>;
189                         interrupts = <0 43 4>;
190                         clocks = <&peri_clk 6>;
191                         clock-frequency = <400000>;
192                 };
193
194                 i2c3: i2c@58783000 {
195                         compatible = "socionext,uniphier-fi2c";
196                         status = "disabled";
197                         reg = <0x58783000 0x80>;
198                         #address-cells = <1>;
199                         #size-cells = <0>;
200                         interrupts = <0 44 4>;
201                         pinctrl-names = "default";
202                         pinctrl-0 = <&pinctrl_i2c3>;
203                         clocks = <&peri_clk 7>;
204                         clock-frequency = <100000>;
205                 };
206
207                 i2c4: i2c@58784000 {
208                         compatible = "socionext,uniphier-fi2c";
209                         status = "disabled";
210                         reg = <0x58784000 0x80>;
211                         #address-cells = <1>;
212                         #size-cells = <0>;
213                         interrupts = <0 45 4>;
214                         pinctrl-names = "default";
215                         pinctrl-0 = <&pinctrl_i2c4>;
216                         clocks = <&peri_clk 8>;
217                         clock-frequency = <100000>;
218                 };
219
220                 i2c5: i2c@58785000 {
221                         compatible = "socionext,uniphier-fi2c";
222                         reg = <0x58785000 0x80>;
223                         #address-cells = <1>;
224                         #size-cells = <0>;
225                         interrupts = <0 25 4>;
226                         clocks = <&peri_clk 9>;
227                         clock-frequency = <400000>;
228                 };
229
230                 system_bus: system-bus@58c00000 {
231                         compatible = "socionext,uniphier-system-bus";
232                         status = "disabled";
233                         reg = <0x58c00000 0x400>;
234                         #address-cells = <2>;
235                         #size-cells = <1>;
236                         pinctrl-names = "default";
237                         pinctrl-0 = <&pinctrl_system_bus>;
238                 };
239
240                 smpctrl@59801000 {
241                         compatible = "socionext,uniphier-smpctrl";
242                         reg = <0x59801000 0x400>;
243                 };
244
245                 sdctrl@59810000 {
246                         compatible = "socionext,uniphier-ld11-sdctrl",
247                                      "simple-mfd", "syscon";
248                         reg = <0x59810000 0x400>;
249
250                         sd_rst: reset {
251                                 compatible = "socionext,uniphier-ld11-sd-reset";
252                                 #reset-cells = <1>;
253                         };
254                 };
255
256                 perictrl@59820000 {
257                         compatible = "socionext,uniphier-ld11-perictrl",
258                                      "simple-mfd", "syscon";
259                         reg = <0x59820000 0x200>;
260
261                         peri_clk: clock {
262                                 compatible = "socionext,uniphier-ld11-peri-clock";
263                                 #clock-cells = <1>;
264                         };
265
266                         peri_rst: reset {
267                                 compatible = "socionext,uniphier-ld11-peri-reset";
268                                 #reset-cells = <1>;
269                         };
270                 };
271
272                 emmc: sdhc@5a000000 {
273                         compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
274                         reg = <0x5a000000 0x400>;
275                         interrupts = <0 78 4>;
276                         pinctrl-names = "default";
277                         pinctrl-0 = <&pinctrl_emmc_1v8>;
278                         clocks = <&sys_clk 4>;
279                         bus-width = <8>;
280                         mmc-ddr-1_8v;
281                         mmc-hs200-1_8v;
282                         cdns,phy-input-delay-legacy = <4>;
283                         cdns,phy-input-delay-mmc-highspeed = <2>;
284                         cdns,phy-input-delay-mmc-ddr = <3>;
285                         cdns,phy-dll-delay-sdclk = <21>;
286                         cdns,phy-dll-delay-sdclk-hsmmc = <21>;
287                 };
288
289                 usb0: usb@5a800100 {
290                         compatible = "socionext,uniphier-ehci", "generic-ehci";
291                         status = "disabled";
292                         reg = <0x5a800100 0x100>;
293                         interrupts = <0 243 4>;
294                         pinctrl-names = "default";
295                         pinctrl-0 = <&pinctrl_usb0>;
296                         clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
297                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
298                                  <&mio_rst 12>;
299                 };
300
301                 usb1: usb@5a810100 {
302                         compatible = "socionext,uniphier-ehci", "generic-ehci";
303                         status = "disabled";
304                         reg = <0x5a810100 0x100>;
305                         interrupts = <0 244 4>;
306                         pinctrl-names = "default";
307                         pinctrl-0 = <&pinctrl_usb1>;
308                         clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
309                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
310                                  <&mio_rst 13>;
311                 };
312
313                 usb2: usb@5a820100 {
314                         compatible = "socionext,uniphier-ehci", "generic-ehci";
315                         status = "disabled";
316                         reg = <0x5a820100 0x100>;
317                         interrupts = <0 245 4>;
318                         pinctrl-names = "default";
319                         pinctrl-0 = <&pinctrl_usb2>;
320                         clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
321                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
322                                  <&mio_rst 14>;
323                 };
324
325                 mioctrl@5b3e0000 {
326                         compatible = "socionext,uniphier-ld11-mioctrl",
327                                      "simple-mfd", "syscon";
328                         reg = <0x5b3e0000 0x800>;
329
330                         mio_clk: clock {
331                                 compatible = "socionext,uniphier-ld11-mio-clock";
332                                 #clock-cells = <1>;
333                         };
334
335                         mio_rst: reset {
336                                 compatible = "socionext,uniphier-ld11-mio-reset";
337                                 #reset-cells = <1>;
338                                 resets = <&sys_rst 7>;
339                         };
340                 };
341
342                 soc-glue@5f800000 {
343                         compatible = "socionext,uniphier-ld11-soc-glue",
344                                      "simple-mfd", "syscon";
345                         reg = <0x5f800000 0x2000>;
346                         u-boot,dm-pre-reloc;
347
348                         pinctrl: pinctrl {
349                                 compatible = "socionext,uniphier-ld11-pinctrl";
350                                 u-boot,dm-pre-reloc;
351                         };
352                 };
353
354                 aidet@5fc20000 {
355                         compatible = "simple-mfd", "syscon";
356                         reg = <0x5fc20000 0x200>;
357                 };
358
359                 gic: interrupt-controller@5fe00000 {
360                         compatible = "arm,gic-v3";
361                         reg = <0x5fe00000 0x10000>,     /* GICD */
362                               <0x5fe40000 0x80000>;     /* GICR */
363                         interrupt-controller;
364                         #interrupt-cells = <3>;
365                         interrupts = <1 9 4>;
366                 };
367
368                 sysctrl@61840000 {
369                         compatible = "socionext,uniphier-ld11-sysctrl",
370                                      "simple-mfd", "syscon";
371                         reg = <0x61840000 0x10000>;
372
373                         sys_clk: clock {
374                                 compatible = "socionext,uniphier-ld11-clock";
375                                 #clock-cells = <1>;
376                         };
377
378                         sys_rst: reset {
379                                 compatible = "socionext,uniphier-ld11-reset";
380                                 #reset-cells = <1>;
381                         };
382                 };
383
384                 nand: nand@68000000 {
385                         compatible = "socionext,uniphier-denali-nand-v5b";
386                         status = "disabled";
387                         reg-names = "nand_data", "denali_reg";
388                         reg = <0x68000000 0x20>, <0x68100000 0x1000>;
389                         interrupts = <0 65 4>;
390                         pinctrl-names = "default";
391                         pinctrl-0 = <&pinctrl_nand>;
392                         clocks = <&sys_clk 2>;
393                         nand-ecc-strength = <8>;
394                 };
395         };
396 };
397
398 /include/ "uniphier-pinctrl.dtsi"