Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
[platform/kernel/u-boot.git] / arch / arm / dts / tegra20-harmony.dts
1 /dts-v1/;
2
3 #include "tegra20.dtsi"
4
5 / {
6         model = "NVIDIA Tegra20 Harmony evaluation board";
7         compatible = "nvidia,harmony", "nvidia,tegra20";
8
9         aliases {
10                 usb0 = "/usb@c5008000";
11                 usb1 = "/usb@c5004000";
12                 sdhci0 = "/sdhci@c8000600";
13                 sdhci1 = "/sdhci@c8000200";
14         };
15
16         memory {
17                 reg = <0x00000000 0x40000000>;
18         };
19
20         host1x {
21                 status = "okay";
22                 dc@54200000 {
23                         status = "okay";
24                         rgb {
25                                 status = "okay";
26                                 nvidia,panel = <&lcd_panel>;
27                         };
28                 };
29         };
30
31         serial@70006300 {
32                 clock-frequency = < 216000000 >;
33         };
34
35         nand-controller@70008000 {
36                 nvidia,wp-gpios = <&gpio 23 0>;         /* PC7 */
37                 nvidia,width = <8>;
38                 nvidia,timing = <26 100 20 80 20 10 12 10 70>;
39                 nand@0 {
40                         reg = <0>;
41                         compatible = "hynix,hy27uf4g2b", "nand-flash";
42                 };
43         };
44
45         i2c@7000c000 {
46                 status = "disabled";
47         };
48
49         i2c@7000c400 {
50                 status = "disabled";
51         };
52
53         i2c@7000c500 {
54                 status = "disabled";
55         };
56
57         i2c@7000d000 {
58                 status = "disabled";
59         };
60
61         usb@c5000000 {
62                 status = "disabled";
63         };
64
65         usb@c5004000 {
66                 nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
67         };
68
69         sdhci@c8000200 {
70                 status = "okay";
71                 cd-gpios = <&gpio 69 1>; /* gpio PI5 */
72                 wp-gpios = <&gpio 57 0>; /* gpio PH1 */
73                 power-gpios = <&gpio 155 0>; /* gpio PT3 */
74                 bus-width = <4>;
75         };
76
77         sdhci@c8000600 {
78                 status = "okay";
79                 cd-gpios = <&gpio 58 1>; /* gpio PH2 */
80                 wp-gpios = <&gpio 59 0>; /* gpio PH3 */
81                 power-gpios = <&gpio 70 0>; /* gpio PI6 */
82                 bus-width = <8>;
83         };
84
85         lcd_panel: panel {
86                 clock = <42430000>;
87                 xres = <1024>;
88                 yres = <600>;
89                 left-margin = <138>;
90                 right-margin = <34>;
91                 hsync-len = <136>;
92                 lower-margin = <4>;
93                 upper-margin = <21>;
94                 vsync-len = <4>;
95                 hsync-active-high;
96                 vsyncx-active-high;
97                 nvidia,bits-per-pixel = <16>;
98                 nvidia,pwm = <&pwm 0 0>;
99                 nvidia,backlight-enable-gpios = <&gpio 13 0>;   /* PB5 */
100                 nvidia,lvds-shutdown-gpios = <&gpio 10 0>;      /* PB2 */
101                 nvidia,backlight-vdd-gpios = <&gpio 176 0>;     /* PW0 */
102                 nvidia,panel-vdd-gpios = <&gpio 22 0>;          /* PC6 */
103                 nvidia,panel-timings = <0 0 200 0 0>;
104         };
105 };