arch/arm/dts/sun9i-a80.dtsi

   1 /*
   2  * Copyright 2014 Chen-Yu Tsai
   3  *
   4  * Chen-Yu Tsai <wens@csie.org>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 #include <dt-bindings/interrupt-controller/arm-gic.h>
  46
  47 #include <dt-bindings/clock/sun9i-a80-ccu.h>
  48 #include <dt-bindings/clock/sun9i-a80-de.h>
  49 #include <dt-bindings/clock/sun9i-a80-usb.h>
  50 #include <dt-bindings/reset/sun9i-a80-ccu.h>
  51 #include <dt-bindings/reset/sun9i-a80-de.h>
  52 #include <dt-bindings/reset/sun9i-a80-usb.h>
  53
  54 / {
  55         #address-cells = <2>;
  56         #size-cells = <2>;
  57         interrupt-parent = <&gic>;
  58
  59         aliases {
  60                 ethernet0 = &gmac;
  61         };
  62
  63         cpus {
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66
  67                 cpu0: cpu@0 {
  68                         compatible = "arm,cortex-a7";
  69                         device_type = "cpu";
  70                         cci-control-port = <&cci_control0>;
  71                         clock-frequency = <12000000>;
  72                         enable-method = "allwinner,sun9i-a80-smp";
  73                         reg = <0x0>;
  74                 };
  75
  76                 cpu1: cpu@1 {
  77                         compatible = "arm,cortex-a7";
  78                         device_type = "cpu";
  79                         cci-control-port = <&cci_control0>;
  80                         clock-frequency = <12000000>;
  81                         enable-method = "allwinner,sun9i-a80-smp";
  82                         reg = <0x1>;
  83                 };
  84
  85                 cpu2: cpu@2 {
  86                         compatible = "arm,cortex-a7";
  87                         device_type = "cpu";
  88                         cci-control-port = <&cci_control0>;
  89                         clock-frequency = <12000000>;
  90                         enable-method = "allwinner,sun9i-a80-smp";
  91                         reg = <0x2>;
  92                 };
  93
  94                 cpu3: cpu@3 {
  95                         compatible = "arm,cortex-a7";
  96                         device_type = "cpu";
  97                         cci-control-port = <&cci_control0>;
  98                         clock-frequency = <12000000>;
  99                         enable-method = "allwinner,sun9i-a80-smp";
 100                         reg = <0x3>;
 101                 };
 102
 103                 cpu4: cpu@100 {
 104                         compatible = "arm,cortex-a15";
 105                         device_type = "cpu";
 106                         cci-control-port = <&cci_control1>;
 107                         clock-frequency = <18000000>;
 108                         enable-method = "allwinner,sun9i-a80-smp";
 109                         reg = <0x100>;
 110                 };
 111
 112                 cpu5: cpu@101 {
 113                         compatible = "arm,cortex-a15";
 114                         device_type = "cpu";
 115                         cci-control-port = <&cci_control1>;
 116                         clock-frequency = <18000000>;
 117                         enable-method = "allwinner,sun9i-a80-smp";
 118                         reg = <0x101>;
 119                 };
 120
 121                 cpu6: cpu@102 {
 122                         compatible = "arm,cortex-a15";
 123                         device_type = "cpu";
 124                         cci-control-port = <&cci_control1>;
 125                         clock-frequency = <18000000>;
 126                         enable-method = "allwinner,sun9i-a80-smp";
 127                         reg = <0x102>;
 128                 };
 129
 130                 cpu7: cpu@103 {
 131                         compatible = "arm,cortex-a15";
 132                         device_type = "cpu";
 133                         cci-control-port = <&cci_control1>;
 134                         clock-frequency = <18000000>;
 135                         enable-method = "allwinner,sun9i-a80-smp";
 136                         reg = <0x103>;
 137                 };
 138         };
 139
 140         timer {
 141                 compatible = "arm,armv7-timer";
 142                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 143                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 144                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 145                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 146                 clock-frequency = <24000000>;
 147                 arm,cpu-registers-not-fw-configured;
 148         };
 149
 150         clocks {
 151                 #address-cells = <1>;
 152                 #size-cells = <1>;
 153                 /*
 154                  * map 64 bit address range down to 32 bits,
 155                  * as the peripherals are all under 512MB.
 156                  */
 157                 ranges = <0 0 0 0x20000000>;
 158
 159                 /*
 160                  * This clock is actually configurable from the PRCM address
 161                  * space. The external 24M oscillator can be turned off, and
 162                  * the clock switched to an internal 16M RC oscillator. Under
 163                  * normal operation there's no reason to do this, and the
 164                  * default is to use the external good one, so just model this
 165                  * as a fixed clock. Also it is not entirely clear if the
 166                  * osc24M mux in the PRCM affects the entire clock tree, which
 167                  * would also throw all the PLL clock rates off, or just the
 168                  * downstream clocks in the PRCM.
 169                  */
 170                 osc24M: clk-24M {
 171                         #clock-cells = <0>;
 172                         compatible = "fixed-clock";
 173                         clock-frequency = <24000000>;
 174                         clock-output-names = "osc24M";
 175                 };
 176
 177                 /*
 178                  * The 32k clock is from an external source, normally the
 179                  * AC100 codec/RTC chip. This serves as a placeholder for
 180                  * board dts files to specify the source.
 181                  */
 182                 osc32k: clk-32k {
 183                         #clock-cells = <0>;
 184                         compatible = "fixed-factor-clock";
 185                         clock-div = <1>;
 186                         clock-mult = <1>;
 187                         clock-output-names = "osc32k";
 188                 };
 189
 190                 /*
 191                  * The following two are dummy clocks, placeholders
 192                  * used in the gmac_tx clock. The gmac driver will
 193                  * choose one parent depending on the PHY interface
 194                  * mode, using clk_set_rate auto-reparenting.
 195                  *
 196                  * The actual TX clock rate is not controlled by the
 197                  * gmac_tx clock.
 198                  */
 199                 mii_phy_tx_clk: mii-phy-tx-clk {
 200                         #clock-cells = <0>;
 201                         compatible = "fixed-clock";
 202                         clock-frequency = <25000000>;
 203                         clock-output-names = "mii_phy_tx";
 204                 };
 205
 206                 gmac_int_tx_clk: gmac-int-tx-clk {
 207                         #clock-cells = <0>;
 208                         compatible = "fixed-clock";
 209                         clock-frequency = <125000000>;
 210                         clock-output-names = "gmac_int_tx";
 211                 };
 212
 213                 gmac_tx_clk: clk@800030 {
 214                         #clock-cells = <0>;
 215                         compatible = "allwinner,sun7i-a20-gmac-clk";
 216                         reg = <0x00800030 0x4>;
 217                         clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
 218                         clock-output-names = "gmac_tx";
 219                 };
 220
 221                 cpus_clk: clk@8001410 {
 222                         compatible = "allwinner,sun9i-a80-cpus-clk";
 223                         reg = <0x08001410 0x4>;
 224                         #clock-cells = <0>;
 225                         clocks = <&osc32k>, <&osc24M>,
 226                                  <&ccu CLK_PLL_PERIPH0>,
 227                                  <&ccu CLK_PLL_AUDIO>;
 228                         clock-output-names = "cpus";
 229                 };
 230
 231                 ahbs: clk-ahbs {
 232                         compatible = "fixed-factor-clock";
 233                         #clock-cells = <0>;
 234                         clock-div = <1>;
 235                         clock-mult = <1>;
 236                         clocks = <&cpus_clk>;
 237                         clock-output-names = "ahbs";
 238                 };
 239
 240                 apbs: clk@800141c {
 241                         compatible = "allwinner,sun8i-a23-apb0-clk";
 242                         reg = <0x0800141c 0x4>;
 243                         #clock-cells = <0>;
 244                         clocks = <&ahbs>;
 245                         clock-output-names = "apbs";
 246                 };
 247
 248                 apbs_gates: clk@8001428 {
 249                         compatible = "allwinner,sun9i-a80-apbs-gates-clk";
 250                         reg = <0x08001428 0x4>;
 251                         #clock-cells = <1>;
 252                         clocks = <&apbs>;
 253                         clock-indices = <0>, <1>,
 254                                         <2>, <3>,
 255                                         <4>, <5>,
 256                                         <6>, <7>,
 257                                         <12>, <13>,
 258                                         <16>, <17>,
 259                                         <18>, <20>;
 260                         clock-output-names = "apbs_pio", "apbs_ir",
 261                                         "apbs_timer", "apbs_rsb",
 262                                         "apbs_uart", "apbs_1wire",
 263                                         "apbs_i2c0", "apbs_i2c1",
 264                                         "apbs_ps2_0", "apbs_ps2_1",
 265                                         "apbs_dma", "apbs_i2s0",
 266                                         "apbs_i2s1", "apbs_twd";
 267                 };
 268
 269                 r_1wire_clk: clk@8001450 {
 270                         reg = <0x08001450 0x4>;
 271                         #clock-cells = <0>;
 272                         compatible = "allwinner,sun4i-a10-mod0-clk";
 273                         clocks = <&osc32k>, <&osc24M>;
 274                         clock-output-names = "r_1wire";
 275                 };
 276
 277                 r_ir_clk: clk@8001454 {
 278                         reg = <0x08001454 0x4>;
 279                         #clock-cells = <0>;
 280                         compatible = "allwinner,sun4i-a10-mod0-clk";
 281                         clocks = <&osc32k>, <&osc24M>;
 282                         clock-output-names = "r_ir";
 283                 };
 284         };
 285
 286         de: display-engine {
 287                 compatible = "allwinner,sun9i-a80-display-engine";
 288                 allwinner,pipelines = <&fe0>, <&fe1>;
 289                 status = "disabled";
 290         };
 291
 292         soc@20000 {
 293                 compatible = "simple-bus";
 294                 #address-cells = <1>;
 295                 #size-cells = <1>;
 296                 /*
 297                  * map 64 bit address range down to 32 bits,
 298                  * as the peripherals are all under 512MB.
 299                  */
 300                 ranges = <0 0 0 0x20000000>;
 301
 302                 sram_b: sram@20000 {
 303                         /* 256 KiB secure SRAM at 0x20000 */
 304                         compatible = "mmio-sram";
 305                         reg = <0x00020000 0x40000>;
 306
 307                         #address-cells = <1>;
 308                         #size-cells = <1>;
 309                         ranges = <0 0x00020000 0x40000>;
 310
 311                         smp-sram@1000 {
 312                                 /*
 313                                  * This is checked by BROM to determine if
 314                                  * cpu0 should jump to SMP entry vector
 315                                  */
 316                                 compatible = "allwinner,sun9i-a80-smp-sram";
 317                                 reg = <0x1000 0x8>;
 318                         };
 319                 };
 320
 321                 gmac: ethernet@830000 {
 322                         compatible = "allwinner,sun7i-a20-gmac";
 323                         reg = <0x00830000 0x1054>;
 324                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 325                         interrupt-names = "macirq";
 326                         clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>;
 327                         clock-names = "stmmaceth", "allwinner_gmac_tx";
 328                         resets = <&ccu RST_BUS_GMAC>;
 329                         reset-names = "stmmaceth";
 330                         snps,pbl = <2>;
 331                         snps,fixed-burst;
 332                         snps,force_sf_dma_mode;
 333                         status = "disabled";
 334
 335                         mdio: mdio {
 336                                 compatible = "snps,dwmac-mdio";
 337                                 #address-cells = <1>;
 338                                 #size-cells = <0>;
 339                         };
 340                 };
 341
 342                 ehci0: usb@a00000 {
 343                         compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 344                         reg = <0x00a00000 0x100>;
 345                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 346                         clocks = <&usb_clocks CLK_BUS_HCI0>;
 347                         resets = <&usb_clocks RST_USB0_HCI>;
 348                         phys = <&usbphy1>;
 349                         phy-names = "usb";
 350                         status = "disabled";
 351                 };
 352
 353                 ohci0: usb@a00400 {
 354                         compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
 355                         reg = <0x00a00400 0x100>;
 356                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 357                         clocks = <&usb_clocks CLK_BUS_HCI0>,
 358                                  <&usb_clocks CLK_USB_OHCI0>;
 359                         resets = <&usb_clocks RST_USB0_HCI>;
 360                         phys = <&usbphy1>;
 361                         phy-names = "usb";
 362                         status = "disabled";
 363                 };
 364
 365                 usbphy1: phy@a00800 {
 366                         compatible = "allwinner,sun9i-a80-usb-phy";
 367                         reg = <0x00a00800 0x4>;
 368                         clocks = <&usb_clocks CLK_USB0_PHY>;
 369                         clock-names = "phy";
 370                         resets = <&usb_clocks RST_USB0_PHY>;
 371                         reset-names = "phy";
 372                         status = "disabled";
 373                         #phy-cells = <0>;
 374                 };
 375
 376                 ehci1: usb@a01000 {
 377                         compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 378                         reg = <0x00a01000 0x100>;
 379                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 380                         clocks = <&usb_clocks CLK_BUS_HCI1>;
 381                         resets = <&usb_clocks RST_USB1_HCI>;
 382                         phys = <&usbphy2>;
 383                         phy-names = "usb";
 384                         status = "disabled";
 385                 };
 386
 387                 usbphy2: phy@a01800 {
 388                         compatible = "allwinner,sun9i-a80-usb-phy";
 389                         reg = <0x00a01800 0x4>;
 390                         clocks = <&usb_clocks CLK_USB1_PHY>,
 391                                  <&usb_clocks CLK_USB_HSIC>,
 392                                  <&usb_clocks CLK_USB1_HSIC>;
 393                         clock-names = "phy",
 394                                       "hsic_12M",
 395                                       "hsic_480M";
 396                         resets = <&usb_clocks RST_USB1_PHY>,
 397                                  <&usb_clocks RST_USB1_HSIC>;
 398                         reset-names = "phy",
 399                                       "hsic";
 400                         status = "disabled";
 401                         #phy-cells = <0>;
 402                         /* usb1 is always used with HSIC */
 403                         phy_type = "hsic";
 404                 };
 405
 406                 ehci2: usb@a02000 {
 407                         compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 408                         reg = <0x00a02000 0x100>;
 409                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 410                         clocks = <&usb_clocks CLK_BUS_HCI2>;
 411                         resets = <&usb_clocks RST_USB2_HCI>;
 412                         phys = <&usbphy3>;
 413                         phy-names = "usb";
 414                         status = "disabled";
 415                 };
 416
 417                 ohci2: usb@a02400 {
 418                         compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
 419                         reg = <0x00a02400 0x100>;
 420                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 421                         clocks = <&usb_clocks CLK_BUS_HCI2>,
 422                                  <&usb_clocks CLK_USB_OHCI2>;
 423                         resets = <&usb_clocks RST_USB2_HCI>;
 424                         phys = <&usbphy3>;
 425                         phy-names = "usb";
 426                         status = "disabled";
 427                 };
 428
 429                 usbphy3: phy@a02800 {
 430                         compatible = "allwinner,sun9i-a80-usb-phy";
 431                         reg = <0x00a02800 0x4>;
 432                         clocks = <&usb_clocks CLK_USB2_PHY>,
 433                                  <&usb_clocks CLK_USB_HSIC>,
 434                                  <&usb_clocks CLK_USB2_HSIC>;
 435                         clock-names = "phy",
 436                                       "hsic_12M",
 437                                       "hsic_480M";
 438                         resets = <&usb_clocks RST_USB2_PHY>,
 439                                  <&usb_clocks RST_USB2_HSIC>;
 440                         reset-names = "phy",
 441                                       "hsic";
 442                         status = "disabled";
 443                         #phy-cells = <0>;
 444                 };
 445
 446                 usb_clocks: clock@a08000 {
 447                         compatible = "allwinner,sun9i-a80-usb-clks";
 448                         reg = <0x00a08000 0x8>;
 449                         clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
 450                         clock-names = "bus", "hosc";
 451                         #clock-cells = <1>;
 452                         #reset-cells = <1>;
 453                 };
 454
 455                 cpucfg@1700000 {
 456                         compatible = "allwinner,sun9i-a80-cpucfg";
 457                         reg = <0x01700000 0x100>;
 458                 };
 459
 460                 crypto: crypto@1c02000 {
 461                         compatible = "allwinner,sun9i-a80-crypto";
 462                         reg = <0x01c02000 0x1000>;
 463                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 464                         resets = <&ccu RST_BUS_SS>;
 465                         clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
 466                         clock-names = "bus", "mod";
 467                 };
 468
 469                 mmc0: mmc@1c0f000 {
 470                         compatible = "allwinner,sun9i-a80-mmc";
 471                         reg = <0x01c0f000 0x1000>;
 472                         clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
 473                                  <&ccu CLK_MMC0_OUTPUT>,
 474                                  <&ccu CLK_MMC0_SAMPLE>;
 475                         clock-names = "ahb", "mmc", "output", "sample";
 476                         resets = <&mmc_config_clk 0>;
 477                         reset-names = "ahb";
 478                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 479                         status = "disabled";
 480                         #address-cells = <1>;
 481                         #size-cells = <0>;
 482                 };
 483
 484                 mmc1: mmc@1c10000 {
 485                         compatible = "allwinner,sun9i-a80-mmc";
 486                         reg = <0x01c10000 0x1000>;
 487                         clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
 488                                  <&ccu CLK_MMC1_OUTPUT>,
 489                                  <&ccu CLK_MMC1_SAMPLE>;
 490                         clock-names = "ahb", "mmc", "output", "sample";
 491                         resets = <&mmc_config_clk 1>;
 492                         reset-names = "ahb";
 493                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 494                         status = "disabled";
 495                         #address-cells = <1>;
 496                         #size-cells = <0>;
 497                 };
 498
 499                 mmc2: mmc@1c11000 {
 500                         compatible = "allwinner,sun9i-a80-mmc";
 501                         reg = <0x01c11000 0x1000>;
 502                         clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
 503                                  <&ccu CLK_MMC2_OUTPUT>,
 504                                  <&ccu CLK_MMC2_SAMPLE>;
 505                         clock-names = "ahb", "mmc", "output", "sample";
 506                         resets = <&mmc_config_clk 2>;
 507                         reset-names = "ahb";
 508                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 509                         status = "disabled";
 510                         #address-cells = <1>;
 511                         #size-cells = <0>;
 512                 };
 513
 514                 mmc3: mmc@1c12000 {
 515                         compatible = "allwinner,sun9i-a80-mmc";
 516                         reg = <0x01c12000 0x1000>;
 517                         clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
 518                                  <&ccu CLK_MMC3_OUTPUT>,
 519                                  <&ccu CLK_MMC3_SAMPLE>;
 520                         clock-names = "ahb", "mmc", "output", "sample";
 521                         resets = <&mmc_config_clk 3>;
 522                         reset-names = "ahb";
 523                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 524                         status = "disabled";
 525                         #address-cells = <1>;
 526                         #size-cells = <0>;
 527                 };
 528
 529                 mmc_config_clk: clk@1c13000 {
 530                         compatible = "allwinner,sun9i-a80-mmc-config-clk";
 531                         reg = <0x01c13000 0x10>;
 532                         clocks = <&ccu CLK_BUS_MMC>;
 533                         resets = <&ccu RST_BUS_MMC>;
 534                         #clock-cells = <1>;
 535                         #reset-cells = <1>;
 536                         clock-output-names = "mmc0_config", "mmc1_config",
 537                                              "mmc2_config", "mmc3_config";
 538                 };
 539
 540                 gic: interrupt-controller@1c41000 {
 541                         compatible = "arm,gic-400";
 542                         reg = <0x01c41000 0x1000>,
 543                               <0x01c42000 0x2000>,
 544                               <0x01c44000 0x2000>,
 545                               <0x01c46000 0x2000>;
 546                         interrupt-controller;
 547                         #interrupt-cells = <3>;
 548                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 549                 };
 550
 551                 cci: cci@1c90000 {
 552                         compatible = "arm,cci-400";
 553                         #address-cells = <1>;
 554                         #size-cells = <1>;
 555                         reg = <0x01c90000 0x1000>;
 556                         ranges = <0x0 0x01c90000 0x10000>;
 557
 558                         cci_control0: slave-if@4000 {
 559                                 compatible = "arm,cci-400-ctrl-if";
 560                                 interface-type = "ace";
 561                                 reg = <0x4000 0x1000>;
 562                         };
 563
 564                         cci_control1: slave-if@5000 {
 565                                 compatible = "arm,cci-400-ctrl-if";
 566                                 interface-type = "ace";
 567                                 reg = <0x5000 0x1000>;
 568                         };
 569
 570                         pmu@9000 {
 571                                  compatible = "arm,cci-400-pmu,r1";
 572                                  reg = <0x9000 0x5000>;
 573                                  interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 574                                               <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 575                                               <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 576                                               <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 577                                               <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 578                         };
 579                 };
 580
 581                 de_clocks: clock@3000000 {
 582                         compatible = "allwinner,sun9i-a80-de-clks";
 583                         reg = <0x03000000 0x30>;
 584                         clocks = <&ccu CLK_DE>,
 585                                  <&ccu CLK_SDRAM>,
 586                                  <&ccu CLK_BUS_DE>;
 587                         clock-names = "mod",
 588                                       "dram",
 589                                       "bus";
 590                         resets = <&ccu RST_BUS_DE>;
 591                         #clock-cells = <1>;
 592                         #reset-cells = <1>;
 593                 };
 594
 595                 fe0: display-frontend@3100000 {
 596                         compatible = "allwinner,sun9i-a80-display-frontend";
 597                         reg = <0x03100000 0x40000>;
 598                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 599                         clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
 600                                  <&de_clocks CLK_DRAM_FE0>;
 601                         clock-names = "ahb", "mod",
 602                                       "ram";
 603                         resets = <&de_clocks RST_FE0>;
 604
 605                         ports {
 606                                 #address-cells = <1>;
 607                                 #size-cells = <0>;
 608
 609                                 fe0_out: port@1 {
 610                                         reg = <1>;
 611
 612                                         fe0_out_deu0: endpoint {
 613                                                 remote-endpoint = <&deu0_in_fe0>;
 614                                         };
 615                                 };
 616                         };
 617                 };
 618
 619                 fe1: display-frontend@3140000 {
 620                         compatible = "allwinner,sun9i-a80-display-frontend";
 621                         reg = <0x03140000 0x40000>;
 622                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 623                         clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
 624                                  <&de_clocks CLK_DRAM_FE1>;
 625                         clock-names = "ahb", "mod",
 626                                       "ram";
 627                         resets = <&de_clocks RST_FE0>;
 628
 629                         ports {
 630                                 #address-cells = <1>;
 631                                 #size-cells = <0>;
 632
 633                                 fe1_out: port@1 {
 634                                         reg = <1>;
 635
 636                                         fe1_out_deu1: endpoint {
 637                                                 remote-endpoint = <&deu1_in_fe1>;
 638                                         };
 639                                 };
 640                         };
 641                 };
 642
 643                 be0: display-backend@3200000 {
 644                         compatible = "allwinner,sun9i-a80-display-backend";
 645                         reg = <0x03200000 0x40000>;
 646                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 647                         clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
 648                                  <&de_clocks CLK_DRAM_BE0>;
 649                         clock-names = "ahb", "mod",
 650                                       "ram";
 651                         resets = <&de_clocks RST_BE0>;
 652
 653                         ports {
 654                                 #address-cells = <1>;
 655                                 #size-cells = <0>;
 656
 657                                 be0_in: port@0 {
 658                                         #address-cells = <1>;
 659                                         #size-cells = <0>;
 660                                         reg = <0>;
 661
 662                                         be0_in_deu0: endpoint@0 {
 663                                                 reg = <0>;
 664                                                 remote-endpoint = <&deu0_out_be0>;
 665                                         };
 666
 667                                         be0_in_deu1: endpoint@1 {
 668                                                 reg = <1>;
 669                                                 remote-endpoint = <&deu1_out_be0>;
 670                                         };
 671                                 };
 672
 673                                 be0_out: port@1 {
 674                                         reg = <1>;
 675
 676                                         be0_out_drc0: endpoint {
 677                                                 remote-endpoint = <&drc0_in_be0>;
 678                                         };
 679                                 };
 680                         };
 681                 };
 682
 683                 be1: display-backend@3240000 {
 684                         compatible = "allwinner,sun9i-a80-display-backend";
 685                         reg = <0x03240000 0x40000>;
 686                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 687                         clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
 688                                  <&de_clocks CLK_DRAM_BE1>;
 689                         clock-names = "ahb", "mod",
 690                                       "ram";
 691                         resets = <&de_clocks RST_BE1>;
 692
 693                         ports {
 694                                 #address-cells = <1>;
 695                                 #size-cells = <0>;
 696
 697                                 be1_in: port@0 {
 698                                         #address-cells = <1>;
 699                                         #size-cells = <0>;
 700                                         reg = <0>;
 701
 702                                         be1_in_deu0: endpoint@0 {
 703                                                 reg = <0>;
 704                                                 remote-endpoint = <&deu0_out_be1>;
 705                                         };
 706
 707                                         be1_in_deu1: endpoint@1 {
 708                                                 reg = <1>;
 709                                                 remote-endpoint = <&deu1_out_be1>;
 710                                         };
 711                                 };
 712
 713                                 be1_out: port@1 {
 714                                         reg = <1>;
 715
 716                                         be1_out_drc1: endpoint {
 717                                                 remote-endpoint = <&drc1_in_be1>;
 718                                         };
 719                                 };
 720                         };
 721                 };
 722
 723                 deu0: deu@3300000 {
 724                         compatible = "allwinner,sun9i-a80-deu";
 725                         reg = <0x03300000 0x40000>;
 726                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 727                         clocks = <&de_clocks CLK_BUS_DEU0>,
 728                                  <&de_clocks CLK_IEP_DEU0>,
 729                                  <&de_clocks CLK_DRAM_DEU0>;
 730                         clock-names = "ahb",
 731                                       "mod",
 732                                       "ram";
 733                         resets = <&de_clocks RST_DEU0>;
 734
 735                         ports {
 736                                 #address-cells = <1>;
 737                                 #size-cells = <0>;
 738
 739                                 deu0_in: port@0 {
 740                                         reg = <0>;
 741
 742                                         deu0_in_fe0: endpoint {
 743                                                 remote-endpoint = <&fe0_out_deu0>;
 744                                         };
 745                                 };
 746
 747                                 deu0_out: port@1 {
 748                                         #address-cells = <1>;
 749                                         #size-cells = <0>;
 750                                         reg = <1>;
 751
 752                                         deu0_out_be0: endpoint@0 {
 753                                                 reg = <0>;
 754                                                 remote-endpoint = <&be0_in_deu0>;
 755                                         };
 756
 757                                         deu0_out_be1: endpoint@1 {
 758                                                 reg = <1>;
 759                                                 remote-endpoint = <&be1_in_deu0>;
 760                                         };
 761                                 };
 762                         };
 763                 };
 764
 765                 deu1: deu@3340000 {
 766                         compatible = "allwinner,sun9i-a80-deu";
 767                         reg = <0x03340000 0x40000>;
 768                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 769                         clocks = <&de_clocks CLK_BUS_DEU1>,
 770                                  <&de_clocks CLK_IEP_DEU1>,
 771                                  <&de_clocks CLK_DRAM_DEU1>;
 772                         clock-names = "ahb",
 773                                       "mod",
 774                                       "ram";
 775                         resets = <&de_clocks RST_DEU1>;
 776
 777                         ports {
 778                                 #address-cells = <1>;
 779                                 #size-cells = <0>;
 780
 781                                 deu1_in: port@0 {
 782                                         reg = <0>;
 783
 784                                         deu1_in_fe1: endpoint {
 785                                                 remote-endpoint = <&fe1_out_deu1>;
 786                                         };
 787                                 };
 788
 789                                 deu1_out: port@1 {
 790                                         #address-cells = <1>;
 791                                         #size-cells = <0>;
 792                                         reg = <1>;
 793
 794                                         deu1_out_be0: endpoint@0 {
 795                                                 reg = <0>;
 796                                                 remote-endpoint = <&be0_in_deu1>;
 797                                         };
 798
 799                                         deu1_out_be1: endpoint@1 {
 800                                                 reg = <1>;
 801                                                 remote-endpoint = <&be1_in_deu1>;
 802                                         };
 803                                 };
 804                         };
 805                 };
 806
 807                 drc0: drc@3400000 {
 808                         compatible = "allwinner,sun9i-a80-drc";
 809                         reg = <0x03400000 0x40000>;
 810                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 811                         clocks = <&de_clocks CLK_BUS_DRC0>,
 812                                  <&de_clocks CLK_IEP_DRC0>,
 813                                  <&de_clocks CLK_DRAM_DRC0>;
 814                         clock-names = "ahb",
 815                                       "mod",
 816                                       "ram";
 817                         resets = <&de_clocks RST_DRC0>;
 818
 819                         ports {
 820                                 #address-cells = <1>;
 821                                 #size-cells = <0>;
 822
 823                                 drc0_in: port@0 {
 824                                         reg = <0>;
 825
 826                                         drc0_in_be0: endpoint {
 827                                                 remote-endpoint = <&be0_out_drc0>;
 828                                         };
 829                                 };
 830
 831                                 drc0_out: port@1 {
 832                                         reg = <1>;
 833
 834                                         drc0_out_tcon0: endpoint {
 835                                                 remote-endpoint = <&tcon0_in_drc0>;
 836                                         };
 837                                 };
 838                         };
 839                 };
 840
 841                 drc1: drc@3440000 {
 842                         compatible = "allwinner,sun9i-a80-drc";
 843                         reg = <0x03440000 0x40000>;
 844                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 845                         clocks = <&de_clocks CLK_BUS_DRC1>,
 846                                  <&de_clocks CLK_IEP_DRC1>,
 847                                  <&de_clocks CLK_DRAM_DRC1>;
 848                         clock-names = "ahb",
 849                                       "mod",
 850                                       "ram";
 851                         resets = <&de_clocks RST_DRC1>;
 852
 853                         ports {
 854                                 #address-cells = <1>;
 855                                 #size-cells = <0>;
 856
 857                                 drc1_in: port@0 {
 858                                         reg = <0>;
 859
 860                                         drc1_in_be1: endpoint {
 861                                                 remote-endpoint = <&be1_out_drc1>;
 862                                         };
 863                                 };
 864
 865                                 drc1_out: port@1 {
 866                                         reg = <1>;
 867
 868                                         drc1_out_tcon1: endpoint {
 869                                                 remote-endpoint = <&tcon1_in_drc1>;
 870                                         };
 871                                 };
 872                         };
 873                 };
 874
 875                 tcon0: lcd-controller@3c00000 {
 876                         compatible = "allwinner,sun9i-a80-tcon-lcd";
 877                         reg = <0x03c00000 0x10000>;
 878                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 879                         clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
 880                         clock-names = "ahb", "tcon-ch0";
 881                         resets = <&ccu RST_BUS_LCD0>,
 882                                  <&ccu RST_BUS_EDP>,
 883                                  <&ccu RST_BUS_LVDS>;
 884                         reset-names = "lcd",
 885                                       "edp",
 886                                       "lvds";
 887                         clock-output-names = "tcon0-pixel-clock";
 888                         #clock-cells = <0>;
 889
 890                         ports {
 891                                 #address-cells = <1>;
 892                                 #size-cells = <0>;
 893
 894                                 tcon0_in: port@0 {
 895                                         reg = <0>;
 896
 897                                         tcon0_in_drc0: endpoint {
 898                                                 remote-endpoint = <&drc0_out_tcon0>;
 899                                         };
 900                                 };
 901
 902                                 tcon0_out: port@1 {
 903                                         reg = <1>;
 904                                 };
 905                         };
 906                 };
 907
 908                 tcon1: lcd-controller@3c10000 {
 909                         compatible = "allwinner,sun9i-a80-tcon-tv";
 910                         reg = <0x03c10000 0x10000>;
 911                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 912                         clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
 913                         clock-names = "ahb", "tcon-ch1";
 914                         resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
 915                         reset-names = "lcd", "edp";
 916
 917                         ports {
 918                                 #address-cells = <1>;
 919                                 #size-cells = <0>;
 920
 921                                 tcon1_in: port@0 {
 922                                         reg = <0>;
 923
 924                                         tcon1_in_drc1: endpoint {
 925                                                 remote-endpoint = <&drc1_out_tcon1>;
 926                                         };
 927                                 };
 928
 929                                 tcon1_out: port@1 {
 930                                         reg = <1>;
 931                                 };
 932                         };
 933                 };
 934
 935                 ccu: clock@6000000 {
 936                         compatible = "allwinner,sun9i-a80-ccu";
 937                         reg = <0x06000000 0x800>;
 938                         clocks = <&osc24M>, <&osc32k>;
 939                         clock-names = "hosc", "losc";
 940                         #clock-cells = <1>;
 941                         #reset-cells = <1>;
 942                 };
 943
 944                 timer@6000c00 {
 945                         compatible = "allwinner,sun4i-a10-timer";
 946                         reg = <0x06000c00 0xa0>;
 947                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 948                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 949                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 950                                      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 951                                      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 952                                      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 953
 954                         clocks = <&osc24M>;
 955                 };
 956
 957                 wdt: watchdog@6000ca0 {
 958                         compatible = "allwinner,sun6i-a31-wdt";
 959                         reg = <0x06000ca0 0x20>;
 960                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 961                         clocks = <&osc24M>;
 962                 };
 963
 964                 pio: pinctrl@6000800 {
 965                         compatible = "allwinner,sun9i-a80-pinctrl";
 966                         reg = <0x06000800 0x400>;
 967                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 968                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 969                                      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 970                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 971                                      <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 972                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 973                         clock-names = "apb", "hosc", "losc";
 974                         gpio-controller;
 975                         interrupt-controller;
 976                         #interrupt-cells = <3>;
 977                         #gpio-cells = <3>;
 978
 979                         gmac_rgmii_pins: gmac-rgmii-pins {
 980                                 pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
 981                                        "PA7", "PA8", "PA9", "PA10", "PA12",
 982                                        "PA13", "PA15", "PA16", "PA17";
 983                                 function = "gmac";
 984                                 /*
 985                                  * data lines in RGMII mode use DDR mode
 986                                  * and need a higher signal drive strength
 987                                  */
 988                                 drive-strength = <40>;
 989                         };
 990
 991                         i2c3_pins: i2c3-pins {
 992                                 pins = "PG10", "PG11";
 993                                 function = "i2c3";
 994                         };
 995
 996                         lcd0_rgb888_pins: lcd0-rgb888-pins {
 997                                 pins = "PD0", "PD1", "PD2", "PD3",
 998                                        "PD4", "PD5", "PD6", "PD7",
 999                                        "PD8", "PD9", "PD10", "PD11",
1000                                        "PD12", "PD13", "PD14", "PD15",
1001                                        "PD16", "PD17", "PD18", "PD19",
1002                                        "PD20", "PD21", "PD22", "PD23",
1003                                        "PD24", "PD25", "PD26", "PD27";
1004                                 function = "lcd0";
1005                         };
1006
1007                         mmc0_pins: mmc0-pins {
1008                                 pins = "PF0", "PF1" ,"PF2", "PF3",
1009                                        "PF4", "PF5";
1010                                 function = "mmc0";
1011                                 drive-strength = <30>;
1012                                 bias-pull-up;
1013                         };
1014
1015                         mmc1_pins: mmc1-pins {
1016                                 pins = "PG0", "PG1" ,"PG2", "PG3",
1017                                                  "PG4", "PG5";
1018                                 function = "mmc1";
1019                                 drive-strength = <30>;
1020                                 bias-pull-up;
1021                         };
1022
1023                         mmc2_8bit_pins: mmc2-8bit-pins {
1024                                 pins = "PC6", "PC7", "PC8", "PC9",
1025                                        "PC10", "PC11", "PC12",
1026                                        "PC13", "PC14", "PC15",
1027                                        "PC16";
1028                                 function = "mmc2";
1029                                 drive-strength = <30>;
1030                                 bias-pull-up;
1031                         };
1032
1033                         uart0_ph_pins: uart0-ph-pins {
1034                                 pins = "PH12", "PH13";
1035                                 function = "uart0";
1036                         };
1037
1038                         uart4_pins: uart4-pins {
1039                                 pins = "PG12", "PG13", "PG14", "PG15";
1040                                 function = "uart4";
1041                         };
1042                 };
1043
1044                 uart0: serial@7000000 {
1045                         compatible = "snps,dw-apb-uart";
1046                         reg = <0x07000000 0x400>;
1047                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
1048                         reg-shift = <2>;
1049                         reg-io-width = <4>;
1050                         clocks = <&ccu CLK_BUS_UART0>;
1051                         resets = <&ccu RST_BUS_UART0>;
1052                         status = "disabled";
1053                 };
1054
1055                 uart1: serial@7000400 {
1056                         compatible = "snps,dw-apb-uart";
1057                         reg = <0x07000400 0x400>;
1058                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1059                         reg-shift = <2>;
1060                         reg-io-width = <4>;
1061                         clocks = <&ccu CLK_BUS_UART1>;
1062                         resets = <&ccu RST_BUS_UART1>;
1063                         status = "disabled";
1064                 };
1065
1066                 uart2: serial@7000800 {
1067                         compatible = "snps,dw-apb-uart";
1068                         reg = <0x07000800 0x400>;
1069                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1070                         reg-shift = <2>;
1071                         reg-io-width = <4>;
1072                         clocks = <&ccu CLK_BUS_UART2>;
1073                         resets = <&ccu RST_BUS_UART2>;
1074                         status = "disabled";
1075                 };
1076
1077                 uart3: serial@7000c00 {
1078                         compatible = "snps,dw-apb-uart";
1079                         reg = <0x07000c00 0x400>;
1080                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1081                         reg-shift = <2>;
1082                         reg-io-width = <4>;
1083                         clocks = <&ccu CLK_BUS_UART3>;
1084                         resets = <&ccu RST_BUS_UART3>;
1085                         status = "disabled";
1086                 };
1087
1088                 uart4: serial@7001000 {
1089                         compatible = "snps,dw-apb-uart";
1090                         reg = <0x07001000 0x400>;
1091                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
1092                         reg-shift = <2>;
1093                         reg-io-width = <4>;
1094                         clocks = <&ccu CLK_BUS_UART4>;
1095                         resets = <&ccu RST_BUS_UART4>;
1096                         status = "disabled";
1097                 };
1098
1099                 uart5: serial@7001400 {
1100                         compatible = "snps,dw-apb-uart";
1101                         reg = <0x07001400 0x400>;
1102                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1103                         reg-shift = <2>;
1104                         reg-io-width = <4>;
1105                         clocks = <&ccu CLK_BUS_UART5>;
1106                         resets = <&ccu RST_BUS_UART5>;
1107                         status = "disabled";
1108                 };
1109
1110                 i2c0: i2c@7002800 {
1111                         compatible = "allwinner,sun6i-a31-i2c";
1112                         reg = <0x07002800 0x400>;
1113                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1114                         clocks = <&ccu CLK_BUS_I2C0>;
1115                         resets = <&ccu RST_BUS_I2C0>;
1116                         status = "disabled";
1117                         #address-cells = <1>;
1118                         #size-cells = <0>;
1119                 };
1120
1121                 i2c1: i2c@7002c00 {
1122                         compatible = "allwinner,sun6i-a31-i2c";
1123                         reg = <0x07002c00 0x400>;
1124                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1125                         clocks = <&ccu CLK_BUS_I2C1>;
1126                         resets = <&ccu RST_BUS_I2C1>;
1127                         status = "disabled";
1128                         #address-cells = <1>;
1129                         #size-cells = <0>;
1130                 };
1131
1132                 i2c2: i2c@7003000 {
1133                         compatible = "allwinner,sun6i-a31-i2c";
1134                         reg = <0x07003000 0x400>;
1135                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1136                         clocks = <&ccu CLK_BUS_I2C2>;
1137                         resets = <&ccu RST_BUS_I2C2>;
1138                         status = "disabled";
1139                         #address-cells = <1>;
1140                         #size-cells = <0>;
1141                 };
1142
1143                 i2c3: i2c@7003400 {
1144                         compatible = "allwinner,sun6i-a31-i2c";
1145                         reg = <0x07003400 0x400>;
1146                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1147                         clocks = <&ccu CLK_BUS_I2C3>;
1148                         resets = <&ccu RST_BUS_I2C3>;
1149                         status = "disabled";
1150                         #address-cells = <1>;
1151                         #size-cells = <0>;
1152                 };
1153
1154                 i2c4: i2c@7003800 {
1155                         compatible = "allwinner,sun6i-a31-i2c";
1156                         reg = <0x07003800 0x400>;
1157                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1158                         clocks = <&ccu CLK_BUS_I2C4>;
1159                         resets = <&ccu RST_BUS_I2C4>;
1160                         status = "disabled";
1161                         #address-cells = <1>;
1162                         #size-cells = <0>;
1163                 };
1164
1165                 r_wdt: watchdog@8001000 {
1166                         compatible = "allwinner,sun6i-a31-wdt";
1167                         reg = <0x08001000 0x20>;
1168                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
1169                         clocks = <&osc24M>;
1170                 };
1171
1172                 prcm@8001400 {
1173                         compatible = "allwinner,sun9i-a80-prcm";
1174                         reg = <0x08001400 0x200>;
1175                 };
1176
1177                 apbs_rst: reset@80014b0 {
1178                         reg = <0x080014b0 0x4>;
1179                         compatible = "allwinner,sun6i-a31-clock-reset";
1180                         #reset-cells = <1>;
1181                 };
1182
1183                 nmi_intc: interrupt-controller@80015a0 {
1184                         compatible = "allwinner,sun9i-a80-nmi";
1185                         interrupt-controller;
1186                         #interrupt-cells = <2>;
1187                         reg = <0x080015a0 0xc>;
1188                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
1189                 };
1190
1191                 r_ir: ir@8002000 {
1192                         compatible = "allwinner,sun6i-a31-ir";
1193                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1194                         pinctrl-names = "default";
1195                         pinctrl-0 = <&r_ir_pins>;
1196                         clocks = <&apbs_gates 1>, <&r_ir_clk>;
1197                         clock-names = "apb", "ir";
1198                         resets = <&apbs_rst 1>;
1199                         reg = <0x08002000 0x40>;
1200                         status = "disabled";
1201                 };
1202
1203                 r_uart: serial@8002800 {
1204                         compatible = "snps,dw-apb-uart";
1205                         reg = <0x08002800 0x400>;
1206                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1207                         reg-shift = <2>;
1208                         reg-io-width = <4>;
1209                         clocks = <&apbs_gates 4>;
1210                         resets = <&apbs_rst 4>;
1211                         status = "disabled";
1212                 };
1213
1214                 r_pio: pinctrl@8002c00 {
1215                         compatible = "allwinner,sun9i-a80-r-pinctrl";
1216                         reg = <0x08002c00 0x400>;
1217                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
1218                                      <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
1219                         clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
1220                         clock-names = "apb", "hosc", "losc";
1221                         gpio-controller;
1222                         interrupt-controller;
1223                         #interrupt-cells = <3>;
1224                         #gpio-cells = <3>;
1225
1226                         r_ir_pins: r-ir-pins {
1227                                 pins = "PL6";
1228                                 function = "s_cir_rx";
1229                         };
1230
1231                         r_rsb_pins: r-rsb-pins {
1232                                 pins = "PN0", "PN1";
1233                                 function = "s_rsb";
1234                                 drive-strength = <20>;
1235                                 bias-pull-up;
1236                         };
1237                 };
1238
1239                 r_rsb: rsb@8003400 {
1240                         compatible = "allwinner,sun8i-a23-rsb";
1241                         reg = <0x08003400 0x400>;
1242                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
1243                         clocks = <&apbs_gates 3>;
1244                         clock-frequency = <3000000>;
1245                         resets = <&apbs_rst 3>;
1246                         pinctrl-names = "default";
1247                         pinctrl-0 = <&r_rsb_pins>;
1248                         status = "disabled";
1249                         #address-cells = <1>;
1250                         #size-cells = <0>;
1251                 };
1252         };
1253 };