2 * Copyright 2013 Maxime Ripard
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This library is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This library is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
45 #include "skeleton.dtsi"
49 #include <dt-bindings/dma/sun4i-a10.h>
52 interrupt-parent = <&intc>;
64 compatible = "allwinner,simple-framebuffer",
66 allwinner,pipeline = "de_be0-lcd0-hdmi";
67 clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>,
68 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>,
69 <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
75 compatible = "allwinner,sun5i-a10s-display-engine";
76 allwinner,pipelines = <&fe0>;
81 compatible = "allwinner,sun5i-a10s-hdmi";
82 reg = <0x01c16000 0x1000>;
84 clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
85 <&ccu CLK_PLL_VIDEO0_2X>,
86 <&ccu CLK_PLL_VIDEO1_2X>;
87 clock-names = "ahb", "mod", "pll-0", "pll-1";
88 dmas = <&dma SUN4I_DMA_NORMAL 16>,
89 <&dma SUN4I_DMA_NORMAL 16>,
90 <&dma SUN4I_DMA_DEDICATED 24>;
91 dma-names = "ddc-tx", "ddc-rx", "audio-tx";
101 hdmi_in_tcon0: endpoint {
102 remote-endpoint = <&tcon0_out_hdmi>;
107 #address-cells = <1>;
115 compatible = "allwinner,sun5i-a10s-pwm";
116 reg = <0x01c20e00 0xc>;
117 clocks = <&ccu CLK_HOSC>;
125 compatible = "allwinner,sun5i-a10s-ccu";
129 compatible = "allwinner,sun5i-a10s-pinctrl";
131 uart0_pins_a: uart0@0 {
132 pins = "PB19", "PB20";
136 uart2_pins_b: uart2@1 {
137 pins = "PC18", "PC19";
141 emac_pins_b: emac0@1 {
142 pins = "PA0", "PA1", "PA2",
143 "PA3", "PA4", "PA5", "PA6",
144 "PA7", "PA8", "PA9", "PA10",
145 "PA11", "PA12", "PA13", "PA14",
150 mmc1_pins_a: mmc1@0 {
151 pins = "PG3", "PG4", "PG5",
154 drive-strength = <30>;
157 spi2_pins_b: spi2@1 {
158 pins = "PB12", "PB13", "PB14";
162 spi2_cs0_pins_b: spi2_cs0@1 {
172 tcon0_out_hdmi: endpoint@2 {
174 remote-endpoint = <&hdmi_in_tcon0>;
175 allwinner,tcon-channel = <1>;