arch/arm/dts/stm32mp15xx-dkx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*
   3  * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
   4  * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
   5  */
   6
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/mfd/st,stpmic1.h>
   9
  10 / {
  11         memory@c0000000 {
  12                 device_type = "memory";
  13                 reg = <0xc0000000 0x20000000>;
  14         };
  15
  16         reserved-memory {
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19                 ranges;
  20
  21                 mcuram2: mcuram2@10000000 {
  22                         compatible = "shared-dma-pool";
  23                         reg = <0x10000000 0x40000>;
  24                         no-map;
  25                 };
  26
  27                 vdev0vring0: vdev0vring0@10040000 {
  28                         compatible = "shared-dma-pool";
  29                         reg = <0x10040000 0x1000>;
  30                         no-map;
  31                 };
  32
  33                 vdev0vring1: vdev0vring1@10041000 {
  34                         compatible = "shared-dma-pool";
  35                         reg = <0x10041000 0x1000>;
  36                         no-map;
  37                 };
  38
  39                 vdev0buffer: vdev0buffer@10042000 {
  40                         compatible = "shared-dma-pool";
  41                         reg = <0x10042000 0x4000>;
  42                         no-map;
  43                 };
  44
  45                 mcuram: mcuram@30000000 {
  46                         compatible = "shared-dma-pool";
  47                         reg = <0x30000000 0x40000>;
  48                         no-map;
  49                 };
  50
  51                 retram: retram@38000000 {
  52                         compatible = "shared-dma-pool";
  53                         reg = <0x38000000 0x10000>;
  54                         no-map;
  55                 };
  56
  57                 gpu_reserved: gpu@d4000000 {
  58                         reg = <0xd4000000 0x4000000>;
  59                         no-map;
  60                 };
  61         };
  62
  63         led {
  64                 compatible = "gpio-leds";
  65                 led-blue {
  66                         label = "heartbeat";
  67                         gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
  68                         linux,default-trigger = "heartbeat";
  69                         default-state = "off";
  70                 };
  71         };
  72
  73         sound {
  74                 compatible = "audio-graph-card";
  75                 label = "STM32MP1-DK";
  76                 routing =
  77                         "Playback" , "MCLK",
  78                         "Capture" , "MCLK",
  79                         "MICL" , "Mic Bias";
  80                 dais = <&sai2a_port &sai2b_port &i2s2_port>;
  81                 status = "okay";
  82         };
  83
  84         vin: vin {
  85                 compatible = "regulator-fixed";
  86                 regulator-name = "vin";
  87                 regulator-min-microvolt = <5000000>;
  88                 regulator-max-microvolt = <5000000>;
  89                 regulator-always-on;
  90         };
  91 };
  92
  93 &adc {
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
  96         vdd-supply = <&vdd>;
  97         vdda-supply = <&vdd>;
  98         vref-supply = <&vrefbuf>;
  99         status = "disabled";
 100         adc1: adc@0 {
 101                 /*
 102                  * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
 103                  * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
 104                  * 5 * (56 + 47kOhms) * 5pF => 2.5us.
 105                  * Use arbitrary margin here (e.g. 5us).
 106                  */
 107                 st,min-sample-time-nsecs = <5000>;
 108                 /* AIN connector, USB Type-C CC1 & CC2 */
 109                 st,adc-channels = <0 1 6 13 18 19>;
 110                 status = "okay";
 111         };
 112         adc2: adc@100 {
 113                 /* AIN connector, USB Type-C CC1 & CC2 */
 114                 st,adc-channels = <0 1 2 6 18 19>;
 115                 st,min-sample-time-nsecs = <5000>;
 116                 status = "okay";
 117         };
 118 };
 119
 120 &cec {
 121         pinctrl-names = "default", "sleep";
 122         pinctrl-0 = <&cec_pins_b>;
 123         pinctrl-1 = <&cec_sleep_pins_b>;
 124         status = "okay";
 125 };
 126
 127 &crc1 {
 128         status = "okay";
 129 };
 130
 131 &dts {
 132         status = "okay";
 133 };
 134
 135 &cpu0{
 136         cpu-supply = <&vddcore>;
 137 };
 138
 139 &cpu1{
 140         cpu-supply = <&vddcore>;
 141 };
 142
 143 &ethernet0 {
 144         status = "okay";
 145         pinctrl-0 = <&ethernet0_rgmii_pins_a>;
 146         pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
 147         pinctrl-names = "default", "sleep";
 148         phy-mode = "rgmii-id";
 149         max-speed = <1000>;
 150         phy-handle = <&phy0>;
 151
 152         mdio0 {
 153                 #address-cells = <1>;
 154                 #size-cells = <0>;
 155                 compatible = "snps,dwmac-mdio";
 156                 phy0: ethernet-phy@0 {
 157                         reg = <0>;
 158                 };
 159         };
 160 };
 161
 162 &gpu {
 163         contiguous-area = <&gpu_reserved>;
 164 };
 165
 166 &hash1 {
 167         status = "okay";
 168 };
 169
 170 &i2c1 {
 171         pinctrl-names = "default", "sleep";
 172         pinctrl-0 = <&i2c1_pins_a>;
 173         pinctrl-1 = <&i2c1_sleep_pins_a>;
 174         i2c-scl-rising-time-ns = <100>;
 175         i2c-scl-falling-time-ns = <7>;
 176         status = "okay";
 177         /delete-property/dmas;
 178         /delete-property/dma-names;
 179
 180         hdmi-transmitter@39 {
 181                 compatible = "sil,sii9022";
 182                 reg = <0x39>;
 183                 iovcc-supply = <&v3v3_hdmi>;
 184                 cvcc12-supply = <&v1v2_hdmi>;
 185                 reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
 186                 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 187                 interrupt-parent = <&gpiog>;
 188                 #sound-dai-cells = <0>;
 189                 status = "okay";
 190
 191                 ports {
 192                         #address-cells = <1>;
 193                         #size-cells = <0>;
 194
 195                         port@0 {
 196                                 reg = <0>;
 197                                 sii9022_in: endpoint {
 198                                         remote-endpoint = <&ltdc_ep0_out>;
 199                                 };
 200                         };
 201
 202                         port@3 {
 203                                 reg = <3>;
 204                                 sii9022_tx_endpoint: endpoint {
 205                                         remote-endpoint = <&i2s2_endpoint>;
 206                                 };
 207                         };
 208                 };
 209         };
 210
 211         cs42l51: cs42l51@4a {
 212                 compatible = "cirrus,cs42l51";
 213                 reg = <0x4a>;
 214                 #sound-dai-cells = <0>;
 215                 VL-supply = <&v3v3>;
 216                 VD-supply = <&v1v8_audio>;
 217                 VA-supply = <&v1v8_audio>;
 218                 VAHP-supply = <&v1v8_audio>;
 219                 reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
 220                 clocks = <&sai2a>;
 221                 clock-names = "MCLK";
 222                 status = "okay";
 223
 224                 cs42l51_port: port {
 225                         #address-cells = <1>;
 226                         #size-cells = <0>;
 227
 228                         cs42l51_tx_endpoint: endpoint@0 {
 229                                 reg = <0>;
 230                                 remote-endpoint = <&sai2a_endpoint>;
 231                                 frame-master;
 232                                 bitclock-master;
 233                         };
 234
 235                         cs42l51_rx_endpoint: endpoint@1 {
 236                                 reg = <1>;
 237                                 remote-endpoint = <&sai2b_endpoint>;
 238                                 frame-master;
 239                                 bitclock-master;
 240                         };
 241                 };
 242         };
 243 };
 244
 245 &i2c4 {
 246         pinctrl-names = "default", "sleep";
 247         pinctrl-0 = <&i2c4_pins_a>;
 248         pinctrl-1 = <&i2c4_sleep_pins_a>;
 249         i2c-scl-rising-time-ns = <185>;
 250         i2c-scl-falling-time-ns = <20>;
 251         clock-frequency = <400000>;
 252         status = "okay";
 253         /* spare dmas for other usage */
 254         /delete-property/dmas;
 255         /delete-property/dma-names;
 256
 257         stusb1600@28 {
 258                 compatible = "st,stusb1600";
 259                 reg = <0x28>;
 260                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 261                 interrupt-parent = <&gpioi>;
 262                 pinctrl-names = "default";
 263                 pinctrl-0 = <&stusb1600_pins_a>;
 264                 status = "okay";
 265                 vdd-supply = <&vin>;
 266
 267                 connector {
 268                         compatible = "usb-c-connector";
 269                         label = "USB-C";
 270                         power-role = "dual";
 271                         typec-power-opmode = "default";
 272
 273                         port {
 274                                 con_usbotg_hs_ep: endpoint {
 275                                         remote-endpoint = <&usbotg_hs_ep>;
 276                                 };
 277                         };
 278                 };
 279         };
 280
 281         pmic: stpmic@33 {
 282                 compatible = "st,stpmic1";
 283                 reg = <0x33>;
 284                 interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
 285                 interrupt-controller;
 286                 #interrupt-cells = <2>;
 287                 status = "okay";
 288
 289                 regulators {
 290                         compatible = "st,stpmic1-regulators";
 291                         buck1-supply = <&vin>;
 292                         buck2-supply = <&vin>;
 293                         buck3-supply = <&vin>;
 294                         buck4-supply = <&vin>;
 295                         ldo1-supply = <&v3v3>;
 296                         ldo2-supply = <&vin>;
 297                         ldo3-supply = <&vdd_ddr>;
 298                         ldo4-supply = <&vin>;
 299                         ldo5-supply = <&vin>;
 300                         ldo6-supply = <&v3v3>;
 301                         vref_ddr-supply = <&vin>;
 302                         boost-supply = <&vin>;
 303                         pwr_sw1-supply = <&bst_out>;
 304                         pwr_sw2-supply = <&bst_out>;
 305
 306                         vddcore: buck1 {
 307                                 regulator-name = "vddcore";
 308                                 regulator-min-microvolt = <1200000>;
 309                                 regulator-max-microvolt = <1350000>;
 310                                 regulator-always-on;
 311                                 regulator-initial-mode = <0>;
 312                                 regulator-over-current-protection;
 313                         };
 314
 315                         vdd_ddr: buck2 {
 316                                 regulator-name = "vdd_ddr";
 317                                 regulator-min-microvolt = <1350000>;
 318                                 regulator-max-microvolt = <1350000>;
 319                                 regulator-always-on;
 320                                 regulator-initial-mode = <0>;
 321                                 regulator-over-current-protection;
 322                         };
 323
 324                         vdd: buck3 {
 325                                 regulator-name = "vdd";
 326                                 regulator-min-microvolt = <3300000>;
 327                                 regulator-max-microvolt = <3300000>;
 328                                 regulator-always-on;
 329                                 st,mask-reset;
 330                                 regulator-initial-mode = <0>;
 331                                 regulator-over-current-protection;
 332                         };
 333
 334                         v3v3: buck4 {
 335                                 regulator-name = "v3v3";
 336                                 regulator-min-microvolt = <3300000>;
 337                                 regulator-max-microvolt = <3300000>;
 338                                 regulator-always-on;
 339                                 regulator-over-current-protection;
 340                                 regulator-initial-mode = <0>;
 341                         };
 342
 343                         v1v8_audio: ldo1 {
 344                                 regulator-name = "v1v8_audio";
 345                                 regulator-min-microvolt = <1800000>;
 346                                 regulator-max-microvolt = <1800000>;
 347                                 regulator-always-on;
 348                                 interrupts = <IT_CURLIM_LDO1 0>;
 349                         };
 350
 351                         v3v3_hdmi: ldo2 {
 352                                 regulator-name = "v3v3_hdmi";
 353                                 regulator-min-microvolt = <3300000>;
 354                                 regulator-max-microvolt = <3300000>;
 355                                 regulator-always-on;
 356                                 interrupts = <IT_CURLIM_LDO2 0>;
 357                         };
 358
 359                         vtt_ddr: ldo3 {
 360                                 regulator-name = "vtt_ddr";
 361                                 regulator-min-microvolt = <500000>;
 362                                 regulator-max-microvolt = <750000>;
 363                                 regulator-always-on;
 364                                 regulator-over-current-protection;
 365                         };
 366
 367                         vdd_usb: ldo4 {
 368                                 regulator-name = "vdd_usb";
 369                                 interrupts = <IT_CURLIM_LDO4 0>;
 370                         };
 371
 372                         vdda: ldo5 {
 373                                 regulator-name = "vdda";
 374                                 regulator-min-microvolt = <2900000>;
 375                                 regulator-max-microvolt = <2900000>;
 376                                 interrupts = <IT_CURLIM_LDO5 0>;
 377                                 regulator-boot-on;
 378                         };
 379
 380                         v1v2_hdmi: ldo6 {
 381                                 regulator-name = "v1v2_hdmi";
 382                                 regulator-min-microvolt = <1200000>;
 383                                 regulator-max-microvolt = <1200000>;
 384                                 regulator-always-on;
 385                                 interrupts = <IT_CURLIM_LDO6 0>;
 386                         };
 387
 388                         vref_ddr: vref_ddr {
 389                                 regulator-name = "vref_ddr";
 390                                 regulator-always-on;
 391                         };
 392
 393                          bst_out: boost {
 394                                 regulator-name = "bst_out";
 395                                 interrupts = <IT_OCP_BOOST 0>;
 396                          };
 397
 398                         vbus_otg: pwr_sw1 {
 399                                 regulator-name = "vbus_otg";
 400                                 interrupts = <IT_OCP_OTG 0>;
 401                          };
 402
 403                          vbus_sw: pwr_sw2 {
 404                                 regulator-name = "vbus_sw";
 405                                 interrupts = <IT_OCP_SWOUT 0>;
 406                                 regulator-active-discharge = <1>;
 407                          };
 408                 };
 409
 410                 onkey {
 411                         compatible = "st,stpmic1-onkey";
 412                         interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
 413                         interrupt-names = "onkey-falling", "onkey-rising";
 414                         power-off-time-sec = <10>;
 415                         status = "okay";
 416                 };
 417
 418                 watchdog {
 419                         compatible = "st,stpmic1-wdt";
 420                         status = "disabled";
 421                 };
 422         };
 423 };
 424
 425 &i2c5 {
 426         pinctrl-names = "default", "sleep";
 427         pinctrl-0 = <&i2c5_pins_a>;
 428         pinctrl-1 = <&i2c5_sleep_pins_a>;
 429         i2c-scl-rising-time-ns = <185>;
 430         i2c-scl-falling-time-ns = <20>;
 431         clock-frequency = <400000>;
 432         /* spare dmas for other usage */
 433         /delete-property/dmas;
 434         /delete-property/dma-names;
 435         status = "disabled";
 436 };
 437
 438 &i2s2 {
 439         clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
 440         clock-names = "pclk", "i2sclk", "x8k", "x11k";
 441         pinctrl-names = "default", "sleep";
 442         pinctrl-0 = <&i2s2_pins_a>;
 443         pinctrl-1 = <&i2s2_sleep_pins_a>;
 444         status = "okay";
 445
 446         i2s2_port: port {
 447                 i2s2_endpoint: endpoint {
 448                         remote-endpoint = <&sii9022_tx_endpoint>;
 449                         format = "i2s";
 450                         mclk-fs = <256>;
 451                 };
 452         };
 453 };
 454
 455 &ipcc {
 456         status = "okay";
 457 };
 458
 459 &iwdg2 {
 460         timeout-sec = <32>;
 461         status = "okay";
 462 };
 463
 464 &ltdc {
 465         pinctrl-names = "default", "sleep";
 466         pinctrl-0 = <&ltdc_pins_a>;
 467         pinctrl-1 = <&ltdc_sleep_pins_a>;
 468         status = "okay";
 469
 470         port {
 471                 ltdc_ep0_out: endpoint@0 {
 472                         reg = <0>;
 473                         remote-endpoint = <&sii9022_in>;
 474                 };
 475         };
 476 };
 477
 478 &m4_rproc {
 479         memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 480                         <&vdev0vring1>, <&vdev0buffer>;
 481         mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
 482         mbox-names = "vq0", "vq1", "shutdown";
 483         interrupt-parent = <&exti>;
 484         interrupts = <68 1>;
 485         status = "okay";
 486 };
 487
 488 &pwr_regulators {
 489         vdd-supply = <&vdd>;
 490         vdd_3v3_usbfs-supply = <&vdd_usb>;
 491 };
 492
 493 &rng1 {
 494         status = "okay";
 495 };
 496
 497 &rtc {
 498         status = "okay";
 499 };
 500
 501 &sai2 {
 502         clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
 503         clock-names = "pclk", "x8k", "x11k";
 504         pinctrl-names = "default", "sleep";
 505         pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
 506         pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
 507         status = "okay";
 508
 509         sai2a: audio-controller@4400b004 {
 510                 #clock-cells = <0>;
 511                 dma-names = "tx";
 512                 clocks = <&rcc SAI2_K>;
 513                 clock-names = "sai_ck";
 514                 status = "okay";
 515
 516                 sai2a_port: port {
 517                         sai2a_endpoint: endpoint {
 518                                 remote-endpoint = <&cs42l51_tx_endpoint>;
 519                                 format = "i2s";
 520                                 mclk-fs = <256>;
 521                                 dai-tdm-slot-num = <2>;
 522                                 dai-tdm-slot-width = <32>;
 523                         };
 524                 };
 525         };
 526
 527         sai2b: audio-controller@4400b024 {
 528                 dma-names = "rx";
 529                 st,sync = <&sai2a 2>;
 530                 clocks = <&rcc SAI2_K>, <&sai2a>;
 531                 clock-names = "sai_ck", "MCLK";
 532                 status = "okay";
 533
 534                 sai2b_port: port {
 535                         sai2b_endpoint: endpoint {
 536                                 remote-endpoint = <&cs42l51_rx_endpoint>;
 537                                 format = "i2s";
 538                                 mclk-fs = <256>;
 539                                 dai-tdm-slot-num = <2>;
 540                                 dai-tdm-slot-width = <32>;
 541                         };
 542                 };
 543         };
 544 };
 545
 546 &sdmmc1 {
 547         pinctrl-names = "default", "opendrain", "sleep";
 548         pinctrl-0 = <&sdmmc1_b4_pins_a>;
 549         pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 550         pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
 551         cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 552         disable-wp;
 553         st,neg-edge;
 554         bus-width = <4>;
 555         vmmc-supply = <&v3v3>;
 556         status = "okay";
 557 };
 558
 559 &sdmmc3 {
 560         pinctrl-names = "default", "opendrain", "sleep";
 561         pinctrl-0 = <&sdmmc3_b4_pins_a>;
 562         pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
 563         pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
 564         broken-cd;
 565         st,neg-edge;
 566         bus-width = <4>;
 567         vmmc-supply = <&v3v3>;
 568         status = "disabled";
 569 };
 570
 571 &timers1 {
 572         /* spare dmas for other usage */
 573         /delete-property/dmas;
 574         /delete-property/dma-names;
 575         status = "disabled";
 576         pwm {
 577                 pinctrl-0 = <&pwm1_pins_a>;
 578                 pinctrl-1 = <&pwm1_sleep_pins_a>;
 579                 pinctrl-names = "default", "sleep";
 580                 status = "okay";
 581         };
 582         timer@0 {
 583                 status = "okay";
 584         };
 585 };
 586
 587 &timers3 {
 588         /delete-property/dmas;
 589         /delete-property/dma-names;
 590         status = "disabled";
 591         pwm {
 592                 pinctrl-0 = <&pwm3_pins_a>;
 593                 pinctrl-1 = <&pwm3_sleep_pins_a>;
 594                 pinctrl-names = "default", "sleep";
 595                 status = "okay";
 596         };
 597         timer@2 {
 598                 status = "okay";
 599         };
 600 };
 601
 602 &timers4 {
 603         /delete-property/dmas;
 604         /delete-property/dma-names;
 605         status = "disabled";
 606         pwm {
 607                 pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
 608                 pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
 609                 pinctrl-names = "default", "sleep";
 610                 status = "okay";
 611         };
 612         timer@3 {
 613                 status = "okay";
 614         };
 615 };
 616
 617 &timers5 {
 618         /delete-property/dmas;
 619         /delete-property/dma-names;
 620         status = "disabled";
 621         pwm {
 622                 pinctrl-0 = <&pwm5_pins_a>;
 623                 pinctrl-1 = <&pwm5_sleep_pins_a>;
 624                 pinctrl-names = "default", "sleep";
 625                 status = "okay";
 626         };
 627         timer@4 {
 628                 status = "okay";
 629         };
 630 };
 631
 632 &timers6 {
 633         /delete-property/dmas;
 634         /delete-property/dma-names;
 635         status = "disabled";
 636         timer@5 {
 637                 status = "okay";
 638         };
 639 };
 640
 641 &timers12 {
 642         /delete-property/dmas;
 643         /delete-property/dma-names;
 644         status = "disabled";
 645         pwm {
 646                 pinctrl-0 = <&pwm12_pins_a>;
 647                 pinctrl-1 = <&pwm12_sleep_pins_a>;
 648                 pinctrl-names = "default", "sleep";
 649                 status = "okay";
 650         };
 651         timer@11 {
 652                 status = "okay";
 653         };
 654 };
 655
 656 &uart4 {
 657         pinctrl-names = "default", "sleep", "idle";
 658         pinctrl-0 = <&uart4_pins_a>;
 659         pinctrl-1 = <&uart4_sleep_pins_a>;
 660         pinctrl-2 = <&uart4_idle_pins_a>;
 661         status = "okay";
 662 };
 663
 664 &uart7 {
 665         pinctrl-names = "default", "sleep", "idle";
 666         pinctrl-0 = <&uart7_pins_c>;
 667         pinctrl-1 = <&uart7_sleep_pins_c>;
 668         pinctrl-2 = <&uart7_idle_pins_c>;
 669         status = "disabled";
 670 };
 671
 672 &usart3 {
 673         pinctrl-names = "default", "sleep", "idle";
 674         pinctrl-0 = <&usart3_pins_c>;
 675         pinctrl-1 = <&usart3_sleep_pins_c>;
 676         pinctrl-2 = <&usart3_idle_pins_c>;
 677         uart-has-rtscts;
 678         status = "disabled";
 679 };
 680
 681 &usbh_ehci {
 682         phys = <&usbphyc_port0>;
 683         status = "okay";
 684 };
 685
 686 &usbotg_hs {
 687         phys = <&usbphyc_port1 0>;
 688         phy-names = "usb2-phy";
 689         usb-role-switch;
 690         status = "okay";
 691
 692         port {
 693                 usbotg_hs_ep: endpoint {
 694                         remote-endpoint = <&con_usbotg_hs_ep>;
 695                 };
 696         };
 697 };
 698
 699 &usbphyc {
 700         status = "okay";
 701 };
 702
 703 &usbphyc_port0 {
 704         phy-supply = <&vdd_usb>;
 705 };
 706
 707 &usbphyc_port1 {
 708         phy-supply = <&vdd_usb>;
 709 };
 710
 711 &vrefbuf {
 712         regulator-min-microvolt = <2500000>;
 713         regulator-max-microvolt = <2500000>;
 714         vdda-supply = <&vdd>;
 715         status = "okay";
 716 };