1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
4 * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
8 #include "stm32f429.dtsi"
9 #include "stm32f429-pinctrl.dtsi"
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/gpio/gpio.h>
14 model = "STMicroelectronics STM32429i-EVAL board";
15 compatible = "st,stm32429i-eval", "st,stm32f429";
18 bootargs = "root=/dev/ram";
19 stdout-path = "serial0:115200n8";
23 device_type = "memory";
24 reg = <0x00000000 0x2000000>;
32 clk_ext_camera: clk-ext-camera {
34 compatible = "fixed-clock";
35 clock-frequency = <24000000>;
40 dma-ranges = <0xc0000000 0x0 0x10000000>;
43 vdda: regulator-vdda {
44 compatible = "regulator-fixed";
45 regulator-name = "vdda";
46 regulator-min-microvolt = <3300000>;
47 regulator-max-microvolt = <3300000>;
50 vref: regulator-vref {
51 compatible = "regulator-fixed";
52 regulator-name = "vref";
53 regulator-min-microvolt = <3300000>;
54 regulator-max-microvolt = <3300000>;
58 compatible = "gpio-leds";
61 linux,default-trigger = "heartbeat";
67 gpios = <&gpiog 10 1>;
70 gpios = <&gpiog 12 1>;
75 compatible = "gpio-keys";
81 linux,code = <KEY_WAKEUP>;
86 linux,code = <KEY_RESTART>;
87 gpios = <&gpioc 13 0>;
91 usbotg_hs_phy: usbphy {
93 compatible = "usb-nop-xceiv";
94 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
95 clock-names = "main_clk";
98 panel_rgb: panel-rgb {
99 compatible = "ampire,am-480272h3tmqw-t01h";
102 panel_in_rgb: endpoint {
103 remote-endpoint = <<dc_out_rgb>;
108 mmc_vcard: mmc_vcard {
109 compatible = "regulator-fixed";
110 regulator-name = "mmc_vcard";
111 regulator-min-microvolt = <3300000>;
112 regulator-max-microvolt = <3300000>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&adc3_in8_pin>;
119 vdda-supply = <&vdda>;
120 vref-supply = <&vref>;
123 st,adc-channels = <8>;
129 clock-frequency = <25000000>;
141 remote-endpoint = <&ov2640_0>;
151 pinctrl-0 = <&i2c1_pins>;
152 pinctrl-names = "default";
156 compatible = "ovti,ov2640";
158 resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
159 pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
160 clocks = <&clk_ext_camera>;
161 clock-names = "xvclk";
166 remote-endpoint = <&dcmi_0>;
171 stmpe1600: stmpe1600@42 {
172 compatible = "st,stmpe1600";
175 interrupt-parent = <&gpioi>;
176 interrupt-controller;
179 stmpegpio: stmpe_gpio {
180 compatible = "st,stmpe-gpio";
194 pinctrl-0 = <<dc_pins>;
195 pinctrl-names = "default";
199 ltdc_out_rgb: endpoint {
200 remote-endpoint = <&panel_in_rgb>;
207 pinctrl-0 = <ðernet_mii>;
208 pinctrl-names = "default";
210 phy-handle = <&phy1>;
212 #address-cells = <1>;
214 compatible = "snps,dwmac-mdio";
215 phy1: ethernet-phy@1 {
227 vmmc-supply = <&mmc_vcard>;
228 cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
229 pinctrl-names = "default", "opendrain";
230 pinctrl-0 = <&sdio_pins>;
231 pinctrl-1 = <&sdio_pins_od>;
233 max-frequency = <12500000>;
240 pinctrl-0 = <&pwm1_pins>;
241 pinctrl-names = "default";
254 pinctrl-0 = <&pwm3_pins>;
255 pinctrl-names = "default";
265 pinctrl-0 = <&usart1_pins_a>;
266 pinctrl-names = "default";
272 phys = <&usbotg_hs_phy>;
273 phy-names = "usb2-phy";
274 pinctrl-0 = <&usbotg_hs_pins_a>;
275 pinctrl-names = "default";