mtd: sf: Make sf_mtd.c more robust
[platform/kernel/u-boot.git] / arch / arm / dts / socfpga_cyclone5_is1.dts
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *  Copyright (C) 2012 Altera Corporation <www.altera.com>
4  */
5
6 #include "socfpga_cyclone5.dtsi"
7
8 / {
9         model = "SoCFPGA Cyclone V IS1";
10         compatible = "anonymous,socfpga-is1", "altr,socfpga-cyclone5", "altr,socfpga";
11
12         chosen {
13                 bootargs = "console=ttyS0,115200";
14                 stdout-path = "serial0:115200n8";
15         };
16
17         memory {
18                 name = "memory";
19                 device_type = "memory";
20                 reg = <0x0 0x10000000>;
21         };
22
23         aliases {
24                 ethernet0 = &gmac1;
25                 udc0 = &usb1;
26         };
27
28         regulator_3_3v: 3-3-v-regulator {
29                 compatible = "regulator-fixed";
30                 regulator-name = "3.3V";
31                 regulator-min-microvolt = <3300000>;
32                 regulator-max-microvolt = <3300000>;
33         };
34
35         soc {
36                 u-boot,dm-pre-reloc;
37         };
38 };
39
40 &gmac1 {
41         status = "okay";
42         phy-mode = "rgmii";
43
44         rxd0-skew-ps = <0>;
45         rxd1-skew-ps = <0>;
46         rxd2-skew-ps = <0>;
47         rxd3-skew-ps = <0>;
48         txen-skew-ps = <0>;
49         txc-skew-ps = <2600>;
50         rxdv-skew-ps = <0>;
51         rxc-skew-ps = <2000>;
52 };
53
54 &gpio1 {
55         status = "okay";
56 };
57
58 &i2c0 {
59         status = "okay";
60
61         eeprom@51 {
62                 compatible = "atmel,24c32";
63                 reg = <0x51>;
64                 pagesize = <32>;
65         };
66
67         rtc@68 {
68                 compatible = "dallas,ds1339";
69                 reg = <0x68>;
70         };
71 };
72
73 &mmc0 {
74         status = "okay";
75         u-boot,dm-pre-reloc;
76
77         cd-gpios = <&portb 18 0>;
78         vmmc-supply = <&regulator_3_3v>;
79         vqmmc-supply = <&regulator_3_3v>;
80 };
81
82 &qspi {
83         status = "okay";
84         u-boot,dm-pre-reloc;
85
86         flash0: n25q00@0 {
87                 u-boot,dm-pre-reloc;
88                 #address-cells = <1>;
89                 #size-cells = <1>;
90                 compatible = "n25q00", "spi-flash";
91                 reg = <0>;      /* chip select */
92                 spi-max-frequency = <100000000>;
93                 m25p,fast-read;
94                 page-size = <256>;
95                 block-size = <16>; /* 2^16, 64KB */
96                 cdns,tshsl-ns = <50>;
97                 cdns,tsd2d-ns = <50>;
98                 cdns,tchsh-ns = <4>;
99                 cdns,tslch-ns = <4>;
100         };
101 };
102
103 &usb1 {
104         status = "okay";
105 };
106
107 &uart0 {
108         u-boot,dm-pre-reloc;
109 };