odroid: remove CONFIG_DM_I2C_COMPAT config
[platform/kernel/u-boot.git] / arch / arm / dts / rk3399-puma.dts
1 /*
2  * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
3  *
4  * SPDX-License-Identifier:     GPL-2.0+        X11
5  */
6
7 /dts-v1/;
8 #include <dt-bindings/pwm/pwm.h>
9 #include "rk3399.dtsi"
10 #include "rk3399-sdram-ddr3-1600.dtsi"
11
12 / {
13         model = "Theobroma Systems RK3399-Q7 SoM";
14         compatible = "tsd,puma", "rockchip,rk3399";
15
16         config {
17                 u-boot,spl-payload-offset = <204800>;
18         };
19
20         chosen {
21                 stdout-path = "serial0:115200n8";
22                 u-boot,spl-boot-order = &spiflash, &sdhci, &sdmmc;
23         };
24
25         aliases {
26                 spi0 = &spi1;
27                 spi1 = &spi5;
28         };
29
30         vdd_center: vdd-center {
31                 compatible = "pwm-regulator";
32                 pwms = <&pwm3 0 25000 0>;
33                 regulator-name = "vdd_center";
34                 regulator-min-microvolt = <800000>;
35                 regulator-max-microvolt = <1400000>;
36                 regulator-init-microvolt = <950000>;
37                 regulator-always-on;
38                 regulator-boot-on;
39                 status = "okay";
40         };
41
42         vcc3v3_sys: vcc3v3-sys {
43                 compatible = "regulator-fixed";
44                 regulator-name = "vcc3v3_sys";
45                 regulator-always-on;
46                 regulator-boot-on;
47                 regulator-min-microvolt = <3300000>;
48                 regulator-max-microvolt = <3300000>;
49         };
50
51         vcc_phy: vcc-phy-regulator {
52                 compatible = "regulator-fixed";
53                 regulator-name = "vcc_phy";
54                 regulator-always-on;
55                 regulator-boot-on;
56         };
57
58         vcc5v0_host: vcc5v0-host-en {
59                 compatible = "regulator-fixed";
60                 regulator-name = "vcc5v0_host";
61                 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
62         };
63
64         clkin_gmac: external-gmac-clock {
65                 compatible = "fixed-clock";
66                 clock-frequency = <125000000>;
67                 clock-output-names = "clkin_gmac";
68                 #clock-cells = <0>;
69         };
70
71         vcc_phy: vcc-phy-regulator {
72                 compatible = "regulator-fixed";
73                 regulator-name = "vcc_phy";
74                 regulator-always-on;
75                 regulator-boot-on;
76         };
77 };
78
79 &emmc_phy {
80         status = "okay";
81 };
82
83 &pwm0 {
84         status = "okay";
85 };
86
87 &pwm2 {
88         status = "okay";
89 };
90
91 &pwm3 {
92         status = "okay";
93 };
94
95 &sdmmc {
96         u-boot,dm-pre-reloc;
97         bus-width = <4>;
98         status = "okay";
99 };
100
101 &sdhci {
102         bus-width = <8>;
103         mmc-hs400-1_8v;
104         mmc-hs400-enhanced-strobe;
105         non-removable;
106         status = "okay";
107 };
108
109 &uart0 {
110         status = "okay";
111 };
112
113 &uart2 {
114         status = "okay";
115 };
116
117 &usb_host0_ehci {
118         status = "okay";
119 };
120
121 &usb_host0_ohci {
122         status = "okay";
123 };
124
125 &dwc3_typec0 {
126         status = "okay";
127 };
128
129 &usb_host1_ehci {
130         status = "okay";
131 };
132
133 &usb_host1_ohci {
134         status = "okay";
135 };
136
137 &dwc3_typec1 {
138         status = "okay";
139 };
140
141 &pinctrl {
142         pmic {
143                 pmic_int_l: pmic-int-l {
144                         rockchip,pins =
145                                 <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
146                 };
147
148                 pmic_dvs2: pmic-dvs2 {
149                         rockchip,pins =
150                                 <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
151                 };
152         };
153 };
154
155 &gmac {
156         phy-supply = <&vcc_phy>;
157         phy-mode = "rgmii";
158         clock_in_out = "input";
159         snps,reset-gpio = <&gpio3 16 GPIO_ACTIVE_LOW>;
160         snps,reset-active-low;
161         snps,reset-delays-us = <0 10000 50000>;
162         assigned-clocks = <&cru SCLK_RMII_SRC>;
163         assigned-clock-parents = <&clkin_gmac>;
164         pinctrl-names = "default";
165         pinctrl-0 = <&rgmii_pins>;
166         tx_delay = <0x10>;
167         rx_delay = <0x10>;
168         status = "okay";
169 };
170
171 &spi1 {
172         u-boot,dm-pre-reloc;
173
174         status = "okay";
175
176         #address-cells = <1>;
177         #size-cells = <0>;
178
179         spiflash: w25q32dw@0 {
180                 u-boot,dm-pre-reloc;
181
182                 compatible = "spi-flash";
183                 reg = <0>;
184                 spi-max-frequency = <5000000>;
185                 spi-cpol;
186                 spi-cpha;
187         };
188 };
189
190 &spi5 {
191         status = "okay";
192 };