arch/arm/dts/r8a77995-draak.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Draak board
   4  *
   5  * Copyright (C) 2016-2018 Renesas Electronics Corp.
   6  * Copyright (C) 2017 Glider bvba
   7  */
   8
   9 /dts-v1/;
  10 #include "r8a77995.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12
  13 / {
  14         model = "Renesas Draak board based on r8a77995";
  15         compatible = "renesas,draak", "renesas,r8a77995";
  16
  17         aliases {
  18                 serial0 = &scif2;
  19                 ethernet0 = &avb;
  20         };
  21
  22         backlight: backlight {
  23                 compatible = "pwm-backlight";
  24                 pwms = <&pwm1 0 50000>;
  25
  26                 brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
  27                 default-brightness-level = <10>;
  28
  29                 power-supply = <&reg_12p0v>;
  30                 enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
  31         };
  32
  33         chosen {
  34                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  35                 stdout-path = "serial0:115200n8";
  36         };
  37
  38         composite-in {
  39                 compatible = "composite-video-connector";
  40
  41                 port {
  42                         composite_con_in: endpoint {
  43                                 remote-endpoint = <&adv7180_in>;
  44                         };
  45                 };
  46         };
  47
  48         hdmi-in {
  49                 compatible = "hdmi-connector";
  50                 type = "a";
  51
  52                 port {
  53                         hdmi_con_in: endpoint {
  54                                 remote-endpoint = <&adv7612_in>;
  55                         };
  56                 };
  57         };
  58
  59         hdmi-out {
  60                 compatible = "hdmi-connector";
  61                 type = "a";
  62
  63                 port {
  64                         hdmi_con_out: endpoint {
  65                                 remote-endpoint = <&adv7511_out>;
  66                         };
  67                 };
  68         };
  69
  70         lvds-decoder {
  71                 compatible = "thine,thc63lvd1024";
  72                 vcc-supply = <&reg_3p3v>;
  73
  74                 ports {
  75                         #address-cells = <1>;
  76                         #size-cells = <0>;
  77
  78                         port@0 {
  79                                 reg = <0>;
  80                                 thc63lvd1024_in: endpoint {
  81                                         remote-endpoint = <&lvds0_out>;
  82                                 };
  83                         };
  84
  85                         port@2 {
  86                                 reg = <2>;
  87                                 thc63lvd1024_out: endpoint {
  88                                         remote-endpoint = <&adv7511_in>;
  89                                 };
  90                         };
  91                 };
  92         };
  93
  94         memory@48000000 {
  95                 device_type = "memory";
  96                 /* first 128MB is reserved for secure area. */
  97                 reg = <0x0 0x48000000 0x0 0x18000000>;
  98         };
  99
 100         reg_1p8v: regulator-1p8v {
 101                 compatible = "regulator-fixed";
 102                 regulator-name = "fixed-1.8V";
 103                 regulator-min-microvolt = <1800000>;
 104                 regulator-max-microvolt = <1800000>;
 105                 regulator-boot-on;
 106                 regulator-always-on;
 107         };
 108
 109         reg_3p3v: regulator-3p3v {
 110                 compatible = "regulator-fixed";
 111                 regulator-name = "fixed-3.3V";
 112                 regulator-min-microvolt = <3300000>;
 113                 regulator-max-microvolt = <3300000>;
 114                 regulator-boot-on;
 115                 regulator-always-on;
 116         };
 117
 118         reg_12p0v: regulator-12p0v {
 119                 compatible = "regulator-fixed";
 120                 regulator-name = "D12.0V";
 121                 regulator-min-microvolt = <12000000>;
 122                 regulator-max-microvolt = <12000000>;
 123                 regulator-boot-on;
 124                 regulator-always-on;
 125         };
 126
 127         vga {
 128                 compatible = "vga-connector";
 129
 130                 port {
 131                         vga_in: endpoint {
 132                                 remote-endpoint = <&adv7123_out>;
 133                         };
 134                 };
 135         };
 136
 137         vga-encoder {
 138                 compatible = "adi,adv7123";
 139
 140                 ports {
 141                         #address-cells = <1>;
 142                         #size-cells = <0>;
 143
 144                         port@0 {
 145                                 reg = <0>;
 146                                 adv7123_in: endpoint {
 147                                         remote-endpoint = <&du_out_rgb>;
 148                                 };
 149                         };
 150                         port@1 {
 151                                 reg = <1>;
 152                                 adv7123_out: endpoint {
 153                                         remote-endpoint = <&vga_in>;
 154                                 };
 155                         };
 156                 };
 157         };
 158
 159         x12_clk: x12 {
 160                 compatible = "fixed-clock";
 161                 #clock-cells = <0>;
 162                 clock-frequency = <74250000>;
 163         };
 164 };
 165
 166 &avb {
 167         pinctrl-0 = <&avb0_pins>;
 168         pinctrl-names = "default";
 169         renesas,no-ether-link;
 170         phy-handle = <&phy0>;
 171         status = "okay";
 172
 173         phy0: ethernet-phy@0 {
 174                 rxc-skew-ps = <1500>;
 175                 reg = <0>;
 176                 interrupt-parent = <&gpio5>;
 177                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 178                 /*
 179                  * TX clock internal delay mode is required for reliable
 180                  * 1Gbps communication using the KSZ9031RNX phy present on
 181                  * the Draak board, however, TX clock internal delay mode
 182                  * isn't supported on r8a77995.  Thus, limit speed to
 183                  * 100Mbps for reliable communication.
 184                  */
 185                 max-speed = <100>;
 186         };
 187 };
 188
 189 &can0 {
 190         pinctrl-0 = <&can0_pins>;
 191         pinctrl-names = "default";
 192         status = "okay";
 193 };
 194
 195 &can1 {
 196         pinctrl-0 = <&can1_pins>;
 197         pinctrl-names = "default";
 198         status = "okay";
 199 };
 200
 201 &du {
 202         pinctrl-0 = <&du_pins>;
 203         pinctrl-names = "default";
 204         status = "okay";
 205
 206         clocks = <&cpg CPG_MOD 724>,
 207                  <&cpg CPG_MOD 723>,
 208                  <&x12_clk>;
 209         clock-names = "du.0", "du.1", "dclkin.0";
 210
 211         ports {
 212                 port@0 {
 213                         endpoint {
 214                                 remote-endpoint = <&adv7123_in>;
 215                         };
 216                 };
 217         };
 218 };
 219
 220 &ehci0 {
 221         dr_mode = "host";
 222         status = "okay";
 223 };
 224
 225 &extal_clk {
 226         clock-frequency = <48000000>;
 227 };
 228
 229 &hsusb {
 230         dr_mode = "host";
 231         status = "okay";
 232 };
 233
 234 &i2c0 {
 235         pinctrl-0 = <&i2c0_pins>;
 236         pinctrl-names = "default";
 237         status = "okay";
 238
 239         composite-in@20 {
 240                 compatible = "adi,adv7180cp";
 241                 reg = <0x20>;
 242
 243                 ports {
 244                         #address-cells = <1>;
 245                         #size-cells = <0>;
 246
 247                         port@0 {
 248                                 reg = <0>;
 249                                 adv7180_in: endpoint {
 250                                         remote-endpoint = <&composite_con_in>;
 251                                 };
 252                         };
 253
 254                         port@3 {
 255                                 reg = <3>;
 256
 257                                 /*
 258                                  * The VIN4 video input path is shared between
 259                                  * CVBS and HDMI inputs through SW[49-53]
 260                                  * switches.
 261                                  *
 262                                  * CVBS is the default selection, link it to
 263                                  * VIN4 here.
 264                                  */
 265                                 adv7180_out: endpoint {
 266                                         remote-endpoint = <&vin4_in>;
 267                                 };
 268                         };
 269                 };
 270
 271         };
 272
 273         hdmi-encoder@39 {
 274                 compatible = "adi,adv7511w";
 275                 reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
 276                 reg-names = "main", "edid", "packet", "cec";
 277                 interrupt-parent = <&gpio1>;
 278                 interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 279
 280                 /* Depends on LVDS */
 281                 max-clock = <135000000>;
 282                 min-vrefresh = <50>;
 283
 284                 adi,input-depth = <8>;
 285                 adi,input-colorspace = "rgb";
 286                 adi,input-clock = "1x";
 287                 adi,input-style = <1>;
 288                 adi,input-justification = "evenly";
 289
 290                 ports {
 291                         #address-cells = <1>;
 292                         #size-cells = <0>;
 293
 294                         port@0 {
 295                                 reg = <0>;
 296                                 adv7511_in: endpoint {
 297                                         remote-endpoint = <&thc63lvd1024_out>;
 298                                 };
 299                         };
 300
 301                         port@1 {
 302                                 reg = <1>;
 303                                 adv7511_out: endpoint {
 304                                         remote-endpoint = <&hdmi_con_out>;
 305                                 };
 306                         };
 307                 };
 308         };
 309
 310         hdmi-decoder@4c {
 311                 compatible = "adi,adv7612";
 312                 reg = <0x4c>;
 313                 default-input = <0>;
 314
 315                 ports {
 316                         #address-cells = <1>;
 317                         #size-cells = <0>;
 318
 319                         port@0 {
 320                                 reg = <0>;
 321
 322                                 adv7612_in: endpoint {
 323                                         remote-endpoint = <&hdmi_con_in>;
 324                                 };
 325                         };
 326
 327                         port@2 {
 328                                 reg = <2>;
 329
 330                                 /*
 331                                  * The VIN4 video input path is shared between
 332                                  * CVBS and HDMI inputs through SW[49-53]
 333                                  * switches.
 334                                  *
 335                                  * CVBS is the default selection, leave HDMI
 336                                  * not connected here.
 337                                  */
 338                                 adv7612_out: endpoint {
 339                                         pclk-sample = <0>;
 340                                         hsync-active = <0>;
 341                                         vsync-active = <0>;
 342                                 };
 343                         };
 344                 };
 345         };
 346
 347         eeprom@50 {
 348                 compatible = "rohm,br24t01", "atmel,24c01";
 349                 reg = <0x50>;
 350                 pagesize = <8>;
 351         };
 352 };
 353
 354 &i2c1 {
 355         pinctrl-0 = <&i2c1_pins>;
 356         pinctrl-names = "default";
 357         status = "okay";
 358 };
 359
 360 &lvds0 {
 361         status = "okay";
 362
 363         clocks = <&cpg CPG_MOD 727>,
 364                  <&x12_clk>,
 365                  <&extal_clk>;
 366         clock-names = "fck", "dclkin.0", "extal";
 367
 368         ports {
 369                 port@1 {
 370                         lvds0_out: endpoint {
 371                                 remote-endpoint = <&thc63lvd1024_in>;
 372                         };
 373                 };
 374         };
 375 };
 376
 377 &lvds1 {
 378         /*
 379          * Even though the LVDS1 output is not connected, the encoder must be
 380          * enabled to supply a pixel clock to the DU for the DPAD output when
 381          * LVDS0 is in use.
 382          */
 383         status = "okay";
 384
 385         clocks = <&cpg CPG_MOD 727>,
 386                  <&x12_clk>,
 387                  <&extal_clk>;
 388         clock-names = "fck", "dclkin.0", "extal";
 389 };
 390
 391 &ohci0 {
 392         dr_mode = "host";
 393         status = "okay";
 394 };
 395
 396 &pfc {
 397         avb0_pins: avb {
 398                 mux {
 399                         groups = "avb0_link", "avb0_mdio", "avb0_mii";
 400                         function = "avb0";
 401                 };
 402         };
 403
 404         can0_pins: can0 {
 405                 groups = "can0_data_a";
 406                 function = "can0";
 407         };
 408
 409         can1_pins: can1 {
 410                 groups = "can1_data_a";
 411                 function = "can1";
 412         };
 413
 414         du_pins: du {
 415                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 416                 function = "du";
 417         };
 418
 419         i2c0_pins: i2c0 {
 420                 groups = "i2c0";
 421                 function = "i2c0";
 422         };
 423
 424         i2c1_pins: i2c1 {
 425                 groups = "i2c1";
 426                 function = "i2c1";
 427         };
 428
 429         pwm0_pins: pwm0 {
 430                 groups = "pwm0_c";
 431                 function = "pwm0";
 432         };
 433
 434         pwm1_pins: pwm1 {
 435                 groups = "pwm1_c";
 436                 function = "pwm1";
 437         };
 438
 439         scif2_pins: scif2 {
 440                 groups = "scif2_data";
 441                 function = "scif2";
 442         };
 443
 444         sdhi2_pins: sd2 {
 445                 groups = "mmc_data8", "mmc_ctrl";
 446                 function = "mmc";
 447                 power-source = <1800>;
 448         };
 449
 450         sdhi2_pins_uhs: sd2_uhs {
 451                 groups = "mmc_data8", "mmc_ctrl";
 452                 function = "mmc";
 453                 power-source = <1800>;
 454         };
 455
 456         usb0_pins: usb0 {
 457                 groups = "usb0";
 458                 function = "usb0";
 459         };
 460
 461         vin4_pins_cvbs: vin4 {
 462                 groups = "vin4_data8", "vin4_sync", "vin4_clk";
 463                 function = "vin4";
 464         };
 465 };
 466
 467 &pwm0 {
 468         pinctrl-0 = <&pwm0_pins>;
 469         pinctrl-names = "default";
 470
 471         status = "okay";
 472 };
 473
 474 &pwm1 {
 475         pinctrl-0 = <&pwm1_pins>;
 476         pinctrl-names = "default";
 477
 478         status = "okay";
 479 };
 480
 481 &rwdt {
 482         timeout-sec = <60>;
 483         status = "okay";
 484 };
 485
 486 &scif2 {
 487         pinctrl-0 = <&scif2_pins>;
 488         pinctrl-names = "default";
 489
 490         status = "okay";
 491 };
 492
 493 &sdhi2 {
 494         /* used for on-board eMMC */
 495         pinctrl-0 = <&sdhi2_pins>;
 496         pinctrl-1 = <&sdhi2_pins_uhs>;
 497         pinctrl-names = "default", "state_uhs";
 498
 499         vmmc-supply = <&reg_3p3v>;
 500         vqmmc-supply = <&reg_1p8v>;
 501         bus-width = <8>;
 502         mmc-hs200-1_8v;
 503         non-removable;
 504         status = "okay";
 505 };
 506
 507 &usb2_phy0 {
 508         pinctrl-0 = <&usb0_pins>;
 509         pinctrl-names = "default";
 510
 511         renesas,no-otg-pins;
 512         status = "okay";
 513 };
 514
 515 &vin4 {
 516         pinctrl-0 = <&vin4_pins_cvbs>;
 517         pinctrl-names = "default";
 518
 519         status = "okay";
 520
 521         ports {
 522                 port {
 523                         vin4_in: endpoint {
 524                                 remote-endpoint = <&adv7180_out>;
 525                         };
 526                 };
 527         };
 528 };