arch/arm/dts/r8a7791-koelsch.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Koelsch board
   4  *
   5  * Copyright (C) 2013 Renesas Electronics Corporation
   6  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   7  * Copyright (C) 2014 Cogent Embedded, Inc.
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7791.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Koelsch";
  45         compatible = "renesas,koelsch", "renesas,r8a7791";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scif1;
  50                 i2c9 = &gpioi2c1;
  51                 i2c12 = &i2cexio1;
  52         };
  53
  54         chosen {
  55                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  56                 stdout-path = "serial0:115200n8";
  57         };
  58
  59         memory@40000000 {
  60                 device_type = "memory";
  61                 reg = <0 0x40000000 0 0x40000000>;
  62         };
  63
  64         memory@200000000 {
  65                 device_type = "memory";
  66                 reg = <2 0x00000000 0 0x40000000>;
  67         };
  68
  69         lbsc {
  70                 #address-cells = <1>;
  71                 #size-cells = <1>;
  72         };
  73
  74         keyboard {
  75                 compatible = "gpio-keys";
  76
  77                 key-1 {
  78                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_1>;
  80                         label = "SW2-1";
  81                         wakeup-source;
  82                         debounce-interval = <20>;
  83                 };
  84                 key-2 {
  85                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_2>;
  87                         label = "SW2-2";
  88                         wakeup-source;
  89                         debounce-interval = <20>;
  90                 };
  91                 key-3 {
  92                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_3>;
  94                         label = "SW2-3";
  95                         wakeup-source;
  96                         debounce-interval = <20>;
  97                 };
  98                 key-4 {
  99                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_4>;
 101                         label = "SW2-4";
 102                         wakeup-source;
 103                         debounce-interval = <20>;
 104                 };
 105                 key-a {
 106                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 107                         linux,code = <KEY_A>;
 108                         label = "SW30";
 109                         wakeup-source;
 110                         debounce-interval = <20>;
 111                 };
 112                 key-b {
 113                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_B>;
 115                         label = "SW31";
 116                         wakeup-source;
 117                         debounce-interval = <20>;
 118                 };
 119                 key-c {
 120                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 121                         linux,code = <KEY_C>;
 122                         label = "SW32";
 123                         wakeup-source;
 124                         debounce-interval = <20>;
 125                 };
 126                 key-d {
 127                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 128                         linux,code = <KEY_D>;
 129                         label = "SW33";
 130                         wakeup-source;
 131                         debounce-interval = <20>;
 132                 };
 133                 key-e {
 134                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_E>;
 136                         label = "SW34";
 137                         wakeup-source;
 138                         debounce-interval = <20>;
 139                 };
 140                 key-f {
 141                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_F>;
 143                         label = "SW35";
 144                         wakeup-source;
 145                         debounce-interval = <20>;
 146                 };
 147                 key-g {
 148                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 149                         linux,code = <KEY_G>;
 150                         label = "SW36";
 151                         wakeup-source;
 152                         debounce-interval = <20>;
 153                 };
 154         };
 155
 156         leds {
 157                 compatible = "gpio-leds";
 158                 led6 {
 159                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 160                         label = "LED6";
 161                 };
 162                 led7 {
 163                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 164                         label = "LED7";
 165                 };
 166                 led8 {
 167                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 168                         label = "LED8";
 169                 };
 170         };
 171
 172         vcc_sdhi0: regulator-vcc-sdhi0 {
 173                 compatible = "regulator-fixed";
 174
 175                 regulator-name = "SDHI0 Vcc";
 176                 regulator-min-microvolt = <3300000>;
 177                 regulator-max-microvolt = <3300000>;
 178
 179                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 180                 enable-active-high;
 181         };
 182
 183         vccq_sdhi0: regulator-vccq-sdhi0 {
 184                 compatible = "regulator-gpio";
 185
 186                 regulator-name = "SDHI0 VccQ";
 187                 regulator-min-microvolt = <1800000>;
 188                 regulator-max-microvolt = <3300000>;
 189
 190                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 191                 gpios-states = <1>;
 192                 states = <3300000 1
 193                           1800000 0>;
 194         };
 195
 196         vcc_sdhi1: regulator-vcc-sdhi1 {
 197                 compatible = "regulator-fixed";
 198
 199                 regulator-name = "SDHI1 Vcc";
 200                 regulator-min-microvolt = <3300000>;
 201                 regulator-max-microvolt = <3300000>;
 202
 203                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 204                 enable-active-high;
 205         };
 206
 207         vccq_sdhi1: regulator-vccq-sdhi1 {
 208                 compatible = "regulator-gpio";
 209
 210                 regulator-name = "SDHI1 VccQ";
 211                 regulator-min-microvolt = <1800000>;
 212                 regulator-max-microvolt = <3300000>;
 213
 214                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 215                 gpios-states = <1>;
 216                 states = <3300000 1
 217                           1800000 0>;
 218         };
 219
 220         vcc_sdhi2: regulator-vcc-sdhi2 {
 221                 compatible = "regulator-fixed";
 222
 223                 regulator-name = "SDHI2 Vcc";
 224                 regulator-min-microvolt = <3300000>;
 225                 regulator-max-microvolt = <3300000>;
 226
 227                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 228                 enable-active-high;
 229         };
 230
 231         vccq_sdhi2: regulator-vccq-sdhi2 {
 232                 compatible = "regulator-gpio";
 233
 234                 regulator-name = "SDHI2 VccQ";
 235                 regulator-min-microvolt = <1800000>;
 236                 regulator-max-microvolt = <3300000>;
 237
 238                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 239                 gpios-states = <1>;
 240                 states = <3300000 1
 241                           1800000 0>;
 242         };
 243
 244         audio_clock: audio_clock {
 245                 compatible = "fixed-clock";
 246                 #clock-cells = <0>;
 247                 clock-frequency = <11289600>;
 248         };
 249
 250         rsnd_ak4643: sound {
 251                 compatible = "simple-audio-card";
 252
 253                 simple-audio-card,format = "left_j";
 254                 simple-audio-card,bitclock-master = <&sndcodec>;
 255                 simple-audio-card,frame-master = <&sndcodec>;
 256
 257                 sndcpu: simple-audio-card,cpu {
 258                         sound-dai = <&rcar_sound>;
 259                 };
 260
 261                 sndcodec: simple-audio-card,codec {
 262                         sound-dai = <&ak4643>;
 263                         clocks = <&audio_clock>;
 264                 };
 265         };
 266
 267         hdmi-in {
 268                 compatible = "hdmi-connector";
 269                 type = "a";
 270
 271                 port {
 272                         hdmi_con_in: endpoint {
 273                                 remote-endpoint = <&adv7612_in>;
 274                         };
 275                 };
 276         };
 277
 278         hdmi-out {
 279                 compatible = "hdmi-connector";
 280                 type = "a";
 281
 282                 port {
 283                         hdmi_con_out: endpoint {
 284                                 remote-endpoint = <&adv7511_out>;
 285                         };
 286                 };
 287         };
 288
 289         x2_clk: x2-clock {
 290                 compatible = "fixed-clock";
 291                 #clock-cells = <0>;
 292                 clock-frequency = <74250000>;
 293         };
 294
 295         x13_clk: x13-clock {
 296                 compatible = "fixed-clock";
 297                 #clock-cells = <0>;
 298                 clock-frequency = <148500000>;
 299         };
 300
 301         gpioi2c1: i2c-9 {
 302                 #address-cells = <1>;
 303                 #size-cells = <0>;
 304                 compatible = "i2c-gpio";
 305                 status = "disabled";
 306                 gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
 307                          &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
 308                         >;
 309                 i2c-gpio,delay-us = <5>;
 310         };
 311
 312         /*
 313          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 314          * A fallback to GPIO is provided.
 315          */
 316         i2cexio1: i2c-12 {
 317                 compatible = "i2c-demux-pinctrl";
 318                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 319                 i2c-bus-name = "i2c-exio1";
 320                 #address-cells = <1>;
 321                 #size-cells = <0>;
 322         };
 323 };
 324
 325 &du {
 326         pinctrl-0 = <&du_pins>;
 327         pinctrl-names = "default";
 328         status = "okay";
 329
 330         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
 331                  <&x13_clk>, <&x2_clk>;
 332         clock-names = "du.0", "du.1", "lvds.0",
 333                       "dclkin.0", "dclkin.1";
 334
 335         ports {
 336                 port@0 {
 337                         endpoint {
 338                                 remote-endpoint = <&adv7511_in>;
 339                         };
 340                 };
 341                 port@1 {
 342                         lvds_connector: endpoint {
 343                         };
 344                 };
 345         };
 346 };
 347
 348 &extal_clk {
 349         clock-frequency = <20000000>;
 350 };
 351
 352 &pfc {
 353         pinctrl-0 = <&scif_clk_pins>;
 354         pinctrl-names = "default";
 355
 356         i2c1_pins: i2c1 {
 357                 groups = "i2c1";
 358                 function = "i2c1";
 359         };
 360
 361         i2c2_pins: i2c2 {
 362                 groups = "i2c2";
 363                 function = "i2c2";
 364         };
 365
 366         du_pins: du {
 367                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 368                 function = "du";
 369         };
 370
 371         scif0_pins: scif0 {
 372                 groups = "scif0_data_d";
 373                 function = "scif0";
 374         };
 375
 376         scif1_pins: scif1 {
 377                 groups = "scif1_data_d";
 378                 function = "scif1";
 379         };
 380
 381         scif_clk_pins: scif_clk {
 382                 groups = "scif_clk";
 383                 function = "scif_clk";
 384         };
 385
 386         ether_pins: ether {
 387                 groups = "eth_link", "eth_mdio", "eth_rmii";
 388                 function = "eth";
 389         };
 390
 391         phy1_pins: phy1 {
 392                 groups = "intc_irq0";
 393                 function = "intc";
 394         };
 395
 396         sdhi0_pins: sd0 {
 397                 groups = "sdhi0_data4", "sdhi0_ctrl";
 398                 function = "sdhi0";
 399                 power-source = <3300>;
 400         };
 401
 402         sdhi0_pins_uhs: sd0_uhs {
 403                 groups = "sdhi0_data4", "sdhi0_ctrl";
 404                 function = "sdhi0";
 405                 power-source = <1800>;
 406         };
 407
 408         sdhi1_pins: sd1 {
 409                 groups = "sdhi1_data4", "sdhi1_ctrl";
 410                 function = "sdhi1";
 411                 power-source = <3300>;
 412         };
 413
 414         sdhi1_pins_uhs: sd1_uhs {
 415                 groups = "sdhi1_data4", "sdhi1_ctrl";
 416                 function = "sdhi1";
 417                 power-source = <1800>;
 418         };
 419
 420         sdhi2_pins: sd2 {
 421                 groups = "sdhi2_data4", "sdhi2_ctrl";
 422                 function = "sdhi2";
 423                 power-source = <3300>;
 424         };
 425
 426         sdhi2_pins_uhs: sd2_uhs {
 427                 groups = "sdhi2_data4", "sdhi2_ctrl";
 428                 function = "sdhi2";
 429                 power-source = <1800>;
 430         };
 431
 432         qspi_pins: qspi {
 433                 groups = "qspi_ctrl", "qspi_data4";
 434                 function = "qspi";
 435         };
 436
 437         msiof0_pins: msiof0 {
 438                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 439                                  "msiof0_tx";
 440                 function = "msiof0";
 441         };
 442
 443         usb0_pins: usb0 {
 444                 groups = "usb0";
 445                 function = "usb0";
 446         };
 447
 448         usb1_pins: usb1 {
 449                 groups = "usb1";
 450                 function = "usb1";
 451         };
 452
 453         vin0_pins: vin0 {
 454                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 455                 function = "vin0";
 456         };
 457
 458         vin1_pins: vin1 {
 459                 groups = "vin1_data8", "vin1_clk";
 460                 function = "vin1";
 461         };
 462
 463         sound_pins: sound {
 464                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 465                 function = "ssi";
 466         };
 467
 468         sound_clk_pins: sound_clk {
 469                 groups = "audio_clk_a";
 470                 function = "audio_clk";
 471         };
 472 };
 473
 474 &ether {
 475         pinctrl-0 = <&ether_pins &phy1_pins>;
 476         pinctrl-names = "default";
 477
 478         phy-handle = <&phy1>;
 479         renesas,ether-link-active-low;
 480         status = "okay";
 481
 482         phy1: ethernet-phy@1 {
 483                 reg = <1>;
 484                 interrupt-parent = <&irqc0>;
 485                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 486                 micrel,led-mode = <1>;
 487         };
 488 };
 489
 490 &cmt0 {
 491         status = "okay";
 492 };
 493
 494 &sata0 {
 495         status = "okay";
 496 };
 497
 498 &scif0 {
 499         pinctrl-0 = <&scif0_pins>;
 500         pinctrl-names = "default";
 501
 502         status = "okay";
 503 };
 504
 505 &scif1 {
 506         pinctrl-0 = <&scif1_pins>;
 507         pinctrl-names = "default";
 508
 509         status = "okay";
 510 };
 511
 512 &scif_clk {
 513         clock-frequency = <14745600>;
 514 };
 515
 516 &sdhi0 {
 517         pinctrl-0 = <&sdhi0_pins>;
 518         pinctrl-1 = <&sdhi0_pins_uhs>;
 519         pinctrl-names = "default", "state_uhs";
 520
 521         vmmc-supply = <&vcc_sdhi0>;
 522         vqmmc-supply = <&vccq_sdhi0>;
 523         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 524         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 525         sd-uhs-sdr50;
 526         sd-uhs-sdr104;
 527         status = "okay";
 528 };
 529
 530 &sdhi1 {
 531         pinctrl-0 = <&sdhi1_pins>;
 532         pinctrl-1 = <&sdhi1_pins_uhs>;
 533         pinctrl-names = "default", "state_uhs";
 534
 535         vmmc-supply = <&vcc_sdhi1>;
 536         vqmmc-supply = <&vccq_sdhi1>;
 537         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 538         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 539         sd-uhs-sdr50;
 540         status = "okay";
 541 };
 542
 543 &sdhi2 {
 544         pinctrl-0 = <&sdhi2_pins>;
 545         pinctrl-1 = <&sdhi2_pins_uhs>;
 546         pinctrl-names = "default", "state_uhs";
 547
 548         vmmc-supply = <&vcc_sdhi2>;
 549         vqmmc-supply = <&vccq_sdhi2>;
 550         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 551         sd-uhs-sdr50;
 552         status = "okay";
 553 };
 554
 555 &qspi {
 556         pinctrl-0 = <&qspi_pins>;
 557         pinctrl-names = "default";
 558
 559         status = "okay";
 560
 561         flash: flash@0 {
 562                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 563                 reg = <0>;
 564                 spi-max-frequency = <30000000>;
 565                 spi-tx-bus-width = <4>;
 566                 spi-rx-bus-width = <4>;
 567                 spi-cpha;
 568                 spi-cpol;
 569                 m25p,fast-read;
 570
 571                 partitions {
 572                         compatible = "fixed-partitions";
 573                         #address-cells = <1>;
 574                         #size-cells = <1>;
 575
 576                         partition@0 {
 577                                 label = "loader";
 578                                 reg = <0x00000000 0x00080000>;
 579                                 read-only;
 580                         };
 581                         partition@80000 {
 582                                 label = "user";
 583                                 reg = <0x00080000 0x00580000>;
 584                                 read-only;
 585                         };
 586                         partition@600000 {
 587                                 label = "flash";
 588                                 reg = <0x00600000 0x03a00000>;
 589                         };
 590                 };
 591         };
 592 };
 593
 594 &msiof0 {
 595         pinctrl-0 = <&msiof0_pins>;
 596         pinctrl-names = "default";
 597
 598         status = "okay";
 599
 600         pmic: pmic@0 {
 601                 compatible = "renesas,r2a11302ft";
 602                 reg = <0>;
 603                 spi-max-frequency = <6000000>;
 604                 spi-cpol;
 605                 spi-cpha;
 606         };
 607 };
 608
 609 &i2c1 {
 610         pinctrl-0 = <&i2c1_pins>;
 611         pinctrl-names = "i2c-exio1";
 612 };
 613
 614 &i2c2 {
 615         pinctrl-0 = <&i2c2_pins>;
 616         pinctrl-names = "default";
 617
 618         status = "okay";
 619         clock-frequency = <100000>;
 620
 621         ak4643: codec@12 {
 622                 compatible = "asahi-kasei,ak4643";
 623                 #sound-dai-cells = <0>;
 624                 reg = <0x12>;
 625         };
 626
 627         composite-in@20 {
 628                 compatible = "adi,adv7180";
 629                 reg = <0x20>;
 630                 remote = <&vin1>;
 631
 632                 port {
 633                         adv7180: endpoint {
 634                                 bus-width = <8>;
 635                                 remote-endpoint = <&vin1ep>;
 636                         };
 637                 };
 638         };
 639
 640         cec_clock: cec-clock {
 641                 compatible = "fixed-clock";
 642                 #clock-cells = <0>;
 643                 clock-frequency = <12000000>;
 644         };
 645
 646         hdmi@39 {
 647                 compatible = "adi,adv7511w";
 648                 reg = <0x39>;
 649                 interrupt-parent = <&gpio3>;
 650                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 651                 clocks = <&cec_clock>;
 652                 clock-names = "cec";
 653
 654                 adi,input-depth = <8>;
 655                 adi,input-colorspace = "rgb";
 656                 adi,input-clock = "1x";
 657                 adi,input-style = <1>;
 658                 adi,input-justification = "evenly";
 659
 660                 ports {
 661                         #address-cells = <1>;
 662                         #size-cells = <0>;
 663
 664                         port@0 {
 665                                 reg = <0>;
 666                                 adv7511_in: endpoint {
 667                                         remote-endpoint = <&du_out_rgb>;
 668                                 };
 669                         };
 670
 671                         port@1 {
 672                                 reg = <1>;
 673                                 adv7511_out: endpoint {
 674                                         remote-endpoint = <&hdmi_con_out>;
 675                                 };
 676                         };
 677                 };
 678         };
 679
 680         hdmi-in@4c {
 681                 compatible = "adi,adv7612";
 682                 reg = <0x4c>;
 683                 interrupt-parent = <&gpio4>;
 684                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 685                 default-input = <0>;
 686
 687                 ports {
 688                         #address-cells = <1>;
 689                         #size-cells = <0>;
 690
 691                         port@0 {
 692                                 reg = <0>;
 693                                 adv7612_in: endpoint {
 694                                         remote-endpoint = <&hdmi_con_in>;
 695                                 };
 696                         };
 697
 698                         port@2 {
 699                                 reg = <2>;
 700                                 adv7612_out: endpoint {
 701                                         remote-endpoint = <&vin0ep2>;
 702                                 };
 703                         };
 704                 };
 705         };
 706
 707         eeprom@50 {
 708                 compatible = "renesas,24c02", "atmel,24c02";
 709                 reg = <0x50>;
 710                 pagesize = <16>;
 711         };
 712 };
 713
 714 &i2c6 {
 715         status = "okay";
 716         clock-frequency = <100000>;
 717
 718         pmic@58 {
 719                 compatible = "dlg,da9063";
 720                 reg = <0x58>;
 721                 interrupt-parent = <&irqc0>;
 722                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 723                 interrupt-controller;
 724
 725                 rtc {
 726                         compatible = "dlg,da9063-rtc";
 727                 };
 728
 729                 wdt {
 730                         compatible = "dlg,da9063-watchdog";
 731                 };
 732         };
 733
 734         vdd_dvfs: regulator@68 {
 735                 compatible = "dlg,da9210";
 736                 reg = <0x68>;
 737                 interrupt-parent = <&irqc0>;
 738                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 739
 740                 regulator-min-microvolt = <1000000>;
 741                 regulator-max-microvolt = <1000000>;
 742                 regulator-boot-on;
 743                 regulator-always-on;
 744         };
 745 };
 746
 747 &pci0 {
 748         status = "okay";
 749         pinctrl-0 = <&usb0_pins>;
 750         pinctrl-names = "default";
 751 };
 752
 753 &pci1 {
 754         status = "okay";
 755         pinctrl-0 = <&usb1_pins>;
 756         pinctrl-names = "default";
 757 };
 758
 759 &hsusb {
 760         status = "okay";
 761         pinctrl-0 = <&usb0_pins>;
 762         pinctrl-names = "default";
 763         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 764 };
 765
 766 &usbphy {
 767         status = "okay";
 768 };
 769
 770 &pcie_bus_clk {
 771         clock-frequency = <100000000>;
 772 };
 773
 774 &pciec {
 775         status = "okay";
 776 };
 777
 778 &cpu0 {
 779         cpu0-supply = <&vdd_dvfs>;
 780 };
 781
 782 /* HDMI video input */
 783 &vin0 {
 784         status = "okay";
 785         pinctrl-0 = <&vin0_pins>;
 786         pinctrl-names = "default";
 787
 788         port {
 789                 #address-cells = <1>;
 790                 #size-cells = <0>;
 791
 792                 vin0ep2: endpoint {
 793                         remote-endpoint = <&adv7612_out>;
 794                         bus-width = <24>;
 795                         hsync-active = <0>;
 796                         vsync-active = <0>;
 797                         pclk-sample = <1>;
 798                         data-active = <1>;
 799                 };
 800         };
 801 };
 802
 803 /* composite video input */
 804 &vin1 {
 805         status = "okay";
 806         pinctrl-0 = <&vin1_pins>;
 807         pinctrl-names = "default";
 808
 809         port {
 810                 #address-cells = <1>;
 811                 #size-cells = <0>;
 812
 813                 vin1ep: endpoint {
 814                         remote-endpoint = <&adv7180>;
 815                         bus-width = <8>;
 816                 };
 817         };
 818 };
 819
 820 &rcar_sound {
 821         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 822         pinctrl-names = "default";
 823
 824         /* Single DAI */
 825         #sound-dai-cells = <0>;
 826
 827         status = "okay";
 828
 829         rcar_sound,dai {
 830                 dai0 {
 831                         playback = <&ssi0 &src2 &dvc0>;
 832                         capture  = <&ssi1 &src3 &dvc1>;
 833                 };
 834         };
 835 };
 836
 837 &ssi1 {
 838         shared-pin;
 839 };