arch/arm/dts/r8a7791-koelsch.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Koelsch board
   4  *
   5  * Copyright (C) 2013 Renesas Electronics Corporation
   6  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   7  * Copyright (C) 2014 Cogent Embedded, Inc.
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7791.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Koelsch";
  45         compatible = "renesas,koelsch", "renesas,r8a7791";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scif1;
  50                 i2c9 = &gpioi2c1;
  51                 i2c10 = &gpioi2c2;
  52                 i2c11 = &gpioi2c4;
  53                 i2c12 = &i2cexio1;
  54                 i2c13 = &i2chdmi;
  55                 i2c14 = &i2cexio4;
  56         };
  57
  58         chosen {
  59                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@40000000 {
  64                 device_type = "memory";
  65                 reg = <0 0x40000000 0 0x40000000>;
  66         };
  67
  68         memory@200000000 {
  69                 device_type = "memory";
  70                 reg = <2 0x00000000 0 0x40000000>;
  71         };
  72
  73         lbsc {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76         };
  77
  78         keyboard {
  79                 compatible = "gpio-keys";
  80
  81                 key-1 {
  82                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_1>;
  84                         label = "SW2-1";
  85                         wakeup-source;
  86                         debounce-interval = <20>;
  87                 };
  88                 key-2 {
  89                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  90                         linux,code = <KEY_2>;
  91                         label = "SW2-2";
  92                         wakeup-source;
  93                         debounce-interval = <20>;
  94                 };
  95                 key-3 {
  96                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_3>;
  98                         label = "SW2-3";
  99                         wakeup-source;
 100                         debounce-interval = <20>;
 101                 };
 102                 key-4 {
 103                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 104                         linux,code = <KEY_4>;
 105                         label = "SW2-4";
 106                         wakeup-source;
 107                         debounce-interval = <20>;
 108                 };
 109                 key-a {
 110                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 111                         linux,code = <KEY_A>;
 112                         label = "SW30";
 113                         wakeup-source;
 114                         debounce-interval = <20>;
 115                 };
 116                 key-b {
 117                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 118                         linux,code = <KEY_B>;
 119                         label = "SW31";
 120                         wakeup-source;
 121                         debounce-interval = <20>;
 122                 };
 123                 key-c {
 124                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 125                         linux,code = <KEY_C>;
 126                         label = "SW32";
 127                         wakeup-source;
 128                         debounce-interval = <20>;
 129                 };
 130                 key-d {
 131                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 132                         linux,code = <KEY_D>;
 133                         label = "SW33";
 134                         wakeup-source;
 135                         debounce-interval = <20>;
 136                 };
 137                 key-e {
 138                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 139                         linux,code = <KEY_E>;
 140                         label = "SW34";
 141                         wakeup-source;
 142                         debounce-interval = <20>;
 143                 };
 144                 key-f {
 145                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 146                         linux,code = <KEY_F>;
 147                         label = "SW35";
 148                         wakeup-source;
 149                         debounce-interval = <20>;
 150                 };
 151                 key-g {
 152                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 153                         linux,code = <KEY_G>;
 154                         label = "SW36";
 155                         wakeup-source;
 156                         debounce-interval = <20>;
 157                 };
 158         };
 159
 160         leds {
 161                 compatible = "gpio-leds";
 162                 led6 {
 163                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 164                         label = "LED6";
 165                 };
 166                 led7 {
 167                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 168                         label = "LED7";
 169                 };
 170                 led8 {
 171                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 172                         label = "LED8";
 173                 };
 174         };
 175
 176         vcc_sdhi0: regulator-vcc-sdhi0 {
 177                 compatible = "regulator-fixed";
 178
 179                 regulator-name = "SDHI0 Vcc";
 180                 regulator-min-microvolt = <3300000>;
 181                 regulator-max-microvolt = <3300000>;
 182
 183                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 184                 enable-active-high;
 185         };
 186
 187         vccq_sdhi0: regulator-vccq-sdhi0 {
 188                 compatible = "regulator-gpio";
 189
 190                 regulator-name = "SDHI0 VccQ";
 191                 regulator-min-microvolt = <1800000>;
 192                 regulator-max-microvolt = <3300000>;
 193
 194                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 195                 gpios-states = <1>;
 196                 states = <3300000 1>, <1800000 0>;
 197         };
 198
 199         vcc_sdhi1: regulator-vcc-sdhi1 {
 200                 compatible = "regulator-fixed";
 201
 202                 regulator-name = "SDHI1 Vcc";
 203                 regulator-min-microvolt = <3300000>;
 204                 regulator-max-microvolt = <3300000>;
 205
 206                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 207                 enable-active-high;
 208         };
 209
 210         vccq_sdhi1: regulator-vccq-sdhi1 {
 211                 compatible = "regulator-gpio";
 212
 213                 regulator-name = "SDHI1 VccQ";
 214                 regulator-min-microvolt = <1800000>;
 215                 regulator-max-microvolt = <3300000>;
 216
 217                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 218                 gpios-states = <1>;
 219                 states = <3300000 1>, <1800000 0>;
 220         };
 221
 222         vcc_sdhi2: regulator-vcc-sdhi2 {
 223                 compatible = "regulator-fixed";
 224
 225                 regulator-name = "SDHI2 Vcc";
 226                 regulator-min-microvolt = <3300000>;
 227                 regulator-max-microvolt = <3300000>;
 228
 229                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 230                 enable-active-high;
 231         };
 232
 233         vccq_sdhi2: regulator-vccq-sdhi2 {
 234                 compatible = "regulator-gpio";
 235
 236                 regulator-name = "SDHI2 VccQ";
 237                 regulator-min-microvolt = <1800000>;
 238                 regulator-max-microvolt = <3300000>;
 239
 240                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 241                 gpios-states = <1>;
 242                 states = <3300000 1>, <1800000 0>;
 243         };
 244
 245         audio_clock: audio_clock {
 246                 compatible = "fixed-clock";
 247                 #clock-cells = <0>;
 248                 clock-frequency = <11289600>;
 249         };
 250
 251         rsnd_ak4643: sound {
 252                 compatible = "simple-audio-card";
 253
 254                 simple-audio-card,format = "left_j";
 255                 simple-audio-card,bitclock-master = <&sndcodec>;
 256                 simple-audio-card,frame-master = <&sndcodec>;
 257
 258                 sndcpu: simple-audio-card,cpu {
 259                         sound-dai = <&rcar_sound>;
 260                 };
 261
 262                 sndcodec: simple-audio-card,codec {
 263                         sound-dai = <&ak4643>;
 264                         clocks = <&audio_clock>;
 265                 };
 266         };
 267
 268         hdmi-in {
 269                 compatible = "hdmi-connector";
 270                 type = "a";
 271
 272                 port {
 273                         hdmi_con_in: endpoint {
 274                                 remote-endpoint = <&adv7612_in>;
 275                         };
 276                 };
 277         };
 278
 279         cec_clock: cec-clock {
 280                 compatible = "fixed-clock";
 281                 #clock-cells = <0>;
 282                 clock-frequency = <12000000>;
 283         };
 284
 285         hdmi-out {
 286                 compatible = "hdmi-connector";
 287                 type = "a";
 288
 289                 port {
 290                         hdmi_con_out: endpoint {
 291                                 remote-endpoint = <&adv7511_out>;
 292                         };
 293                 };
 294         };
 295
 296         x2_clk: x2-clock {
 297                 compatible = "fixed-clock";
 298                 #clock-cells = <0>;
 299                 clock-frequency = <74250000>;
 300         };
 301
 302         x13_clk: x13-clock {
 303                 compatible = "fixed-clock";
 304                 #clock-cells = <0>;
 305                 clock-frequency = <148500000>;
 306         };
 307
 308         gpioi2c1: i2c-9 {
 309                 #address-cells = <1>;
 310                 #size-cells = <0>;
 311                 compatible = "i2c-gpio";
 312                 status = "disabled";
 313                 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 314                 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 315                 i2c-gpio,delay-us = <5>;
 316         };
 317
 318         gpioi2c2: i2c-10 {
 319                 #address-cells = <1>;
 320                 #size-cells = <0>;
 321                 compatible = "i2c-gpio";
 322                 status = "disabled";
 323                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 324                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 325                 i2c-gpio,delay-us = <5>;
 326         };
 327
 328         gpioi2c4: i2c-11 {
 329                 #address-cells = <1>;
 330                 #size-cells = <0>;
 331                 compatible = "i2c-gpio";
 332                 status = "disabled";
 333                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 334                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 335                 i2c-gpio,delay-us = <5>;
 336         };
 337
 338         /*
 339          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 340          * A fallback to GPIO is provided.
 341          */
 342         i2cexio1: i2c-12 {
 343                 compatible = "i2c-demux-pinctrl";
 344                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 345                 i2c-bus-name = "i2c-exio1";
 346                 #address-cells = <1>;
 347                 #size-cells = <0>;
 348         };
 349
 350         /*
 351          * A fallback to GPIO is provided for I2C2.
 352          */
 353         i2chdmi: i2c-13 {
 354                 compatible = "i2c-demux-pinctrl";
 355                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 356                 i2c-bus-name = "i2c-hdmi";
 357                 #address-cells = <1>;
 358                 #size-cells = <0>;
 359
 360                 ak4643: codec@12 {
 361                         compatible = "asahi-kasei,ak4643";
 362                         #sound-dai-cells = <0>;
 363                         reg = <0x12>;
 364                 };
 365
 366                 composite-in@20 {
 367                         compatible = "adi,adv7180";
 368                         reg = <0x20>;
 369                         remote = <&vin1>;
 370
 371                         port {
 372                                 adv7180: endpoint {
 373                                         bus-width = <8>;
 374                                         remote-endpoint = <&vin1ep>;
 375                                 };
 376                         };
 377                 };
 378
 379                 hdmi@39 {
 380                         compatible = "adi,adv7511w";
 381                         reg = <0x39>;
 382                         interrupt-parent = <&gpio3>;
 383                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 384                         clocks = <&cec_clock>;
 385                         clock-names = "cec";
 386
 387                         adi,input-depth = <8>;
 388                         adi,input-colorspace = "rgb";
 389                         adi,input-clock = "1x";
 390                         adi,input-style = <1>;
 391                         adi,input-justification = "evenly";
 392
 393                         ports {
 394                                 #address-cells = <1>;
 395                                 #size-cells = <0>;
 396
 397                                 port@0 {
 398                                         reg = <0>;
 399                                         adv7511_in: endpoint {
 400                                                 remote-endpoint = <&du_out_rgb>;
 401                                         };
 402                                 };
 403
 404                                 port@1 {
 405                                         reg = <1>;
 406                                         adv7511_out: endpoint {
 407                                                 remote-endpoint = <&hdmi_con_out>;
 408                                         };
 409                                 };
 410                         };
 411                 };
 412
 413                 hdmi-in@4c {
 414                         compatible = "adi,adv7612";
 415                         reg = <0x4c>;
 416                         interrupt-parent = <&gpio4>;
 417                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 418                         default-input = <0>;
 419
 420                         ports {
 421                                 #address-cells = <1>;
 422                                 #size-cells = <0>;
 423
 424                                 port@0 {
 425                                         reg = <0>;
 426                                         adv7612_in: endpoint {
 427                                                 remote-endpoint = <&hdmi_con_in>;
 428                                         };
 429                                 };
 430
 431                                 port@2 {
 432                                         reg = <2>;
 433                                         adv7612_out: endpoint {
 434                                                 remote-endpoint = <&vin0ep2>;
 435                                         };
 436                                 };
 437                         };
 438                 };
 439
 440                 eeprom@50 {
 441                         compatible = "renesas,r1ex24002", "atmel,24c02";
 442                         reg = <0x50>;
 443                         pagesize = <16>;
 444                 };
 445         };
 446
 447         /*
 448          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 449          * A fallback to GPIO is provided.
 450          */
 451         i2cexio4: i2c-14 {
 452                 compatible = "i2c-demux-pinctrl";
 453                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 454                 i2c-bus-name = "i2c-exio4";
 455                 #address-cells = <1>;
 456                 #size-cells = <0>;
 457         };
 458 };
 459
 460 &du {
 461         pinctrl-0 = <&du_pins>;
 462         pinctrl-names = "default";
 463         status = "okay";
 464
 465         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 466                  <&x13_clk>, <&x2_clk>;
 467         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 468
 469         ports {
 470                 port@0 {
 471                         endpoint {
 472                                 remote-endpoint = <&adv7511_in>;
 473                         };
 474                 };
 475         };
 476 };
 477
 478 &lvds0 {
 479         ports {
 480                 port@1 {
 481                         lvds_connector: endpoint {
 482                         };
 483                 };
 484         };
 485 };
 486
 487 &extal_clk {
 488         clock-frequency = <20000000>;
 489 };
 490
 491 &pfc {
 492         pinctrl-0 = <&scif_clk_pins>;
 493         pinctrl-names = "default";
 494
 495         i2c1_pins: i2c1 {
 496                 groups = "i2c1";
 497                 function = "i2c1";
 498         };
 499
 500         i2c2_pins: i2c2 {
 501                 groups = "i2c2";
 502                 function = "i2c2";
 503         };
 504
 505         i2c4_pins: i2c4 {
 506                 groups = "i2c4_c";
 507                 function = "i2c4";
 508         };
 509
 510         du_pins: du {
 511                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 512                 function = "du";
 513         };
 514
 515         scif0_pins: scif0 {
 516                 groups = "scif0_data_d";
 517                 function = "scif0";
 518         };
 519
 520         scif1_pins: scif1 {
 521                 groups = "scif1_data_d";
 522                 function = "scif1";
 523         };
 524
 525         scif_clk_pins: scif_clk {
 526                 groups = "scif_clk";
 527                 function = "scif_clk";
 528         };
 529
 530         ether_pins: ether {
 531                 groups = "eth_link", "eth_mdio", "eth_rmii";
 532                 function = "eth";
 533         };
 534
 535         phy1_pins: phy1 {
 536                 groups = "intc_irq0";
 537                 function = "intc";
 538         };
 539
 540         pmic_irq_pins: pmicirq {
 541                 groups = "intc_irq2";
 542                 function = "intc";
 543         };
 544
 545         sdhi0_pins: sd0 {
 546                 groups = "sdhi0_data4", "sdhi0_ctrl";
 547                 function = "sdhi0";
 548                 power-source = <3300>;
 549         };
 550
 551         sdhi0_pins_uhs: sd0_uhs {
 552                 groups = "sdhi0_data4", "sdhi0_ctrl";
 553                 function = "sdhi0";
 554                 power-source = <1800>;
 555         };
 556
 557         sdhi1_pins: sd1 {
 558                 groups = "sdhi1_data4", "sdhi1_ctrl";
 559                 function = "sdhi1";
 560                 power-source = <3300>;
 561         };
 562
 563         sdhi1_pins_uhs: sd1_uhs {
 564                 groups = "sdhi1_data4", "sdhi1_ctrl";
 565                 function = "sdhi1";
 566                 power-source = <1800>;
 567         };
 568
 569         sdhi2_pins: sd2 {
 570                 groups = "sdhi2_data4", "sdhi2_ctrl";
 571                 function = "sdhi2";
 572                 power-source = <3300>;
 573         };
 574
 575         sdhi2_pins_uhs: sd2_uhs {
 576                 groups = "sdhi2_data4", "sdhi2_ctrl";
 577                 function = "sdhi2";
 578                 power-source = <1800>;
 579         };
 580
 581         qspi_pins: qspi {
 582                 groups = "qspi_ctrl", "qspi_data4";
 583                 function = "qspi";
 584         };
 585
 586         msiof0_pins: msiof0 {
 587                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 588                                  "msiof0_tx";
 589                 function = "msiof0";
 590         };
 591
 592         usb0_pins: usb0 {
 593                 groups = "usb0";
 594                 function = "usb0";
 595         };
 596
 597         usb1_pins: usb1 {
 598                 groups = "usb1";
 599                 function = "usb1";
 600         };
 601
 602         vin0_pins: vin0 {
 603                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 604                 function = "vin0";
 605         };
 606
 607         vin1_pins: vin1 {
 608                 groups = "vin1_data8", "vin1_clk";
 609                 function = "vin1";
 610         };
 611
 612         sound_pins: sound {
 613                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 614                 function = "ssi";
 615         };
 616
 617         sound_clk_pins: sound_clk {
 618                 groups = "audio_clk_a";
 619                 function = "audio_clk";
 620         };
 621 };
 622
 623 &ether {
 624         pinctrl-0 = <&ether_pins &phy1_pins>;
 625         pinctrl-names = "default";
 626
 627         phy-handle = <&phy1>;
 628         renesas,ether-link-active-low;
 629         status = "okay";
 630
 631         phy1: ethernet-phy@1 {
 632                 reg = <1>;
 633                 interrupt-parent = <&irqc0>;
 634                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 635                 micrel,led-mode = <1>;
 636         };
 637 };
 638
 639 &cmt0 {
 640         status = "okay";
 641 };
 642
 643 &rwdt {
 644         timeout-sec = <60>;
 645         status = "okay";
 646 };
 647
 648 &sata0 {
 649         status = "okay";
 650 };
 651
 652 &scif0 {
 653         pinctrl-0 = <&scif0_pins>;
 654         pinctrl-names = "default";
 655
 656         status = "okay";
 657 };
 658
 659 &scif1 {
 660         pinctrl-0 = <&scif1_pins>;
 661         pinctrl-names = "default";
 662
 663         status = "okay";
 664 };
 665
 666 &scif_clk {
 667         clock-frequency = <14745600>;
 668 };
 669
 670 &sdhi0 {
 671         pinctrl-0 = <&sdhi0_pins>;
 672         pinctrl-1 = <&sdhi0_pins_uhs>;
 673         pinctrl-names = "default", "state_uhs";
 674
 675         vmmc-supply = <&vcc_sdhi0>;
 676         vqmmc-supply = <&vccq_sdhi0>;
 677         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 678         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 679         sd-uhs-sdr50;
 680         sd-uhs-sdr104;
 681         status = "okay";
 682 };
 683
 684 &sdhi1 {
 685         pinctrl-0 = <&sdhi1_pins>;
 686         pinctrl-1 = <&sdhi1_pins_uhs>;
 687         pinctrl-names = "default", "state_uhs";
 688
 689         vmmc-supply = <&vcc_sdhi1>;
 690         vqmmc-supply = <&vccq_sdhi1>;
 691         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 692         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 693         sd-uhs-sdr50;
 694         status = "okay";
 695 };
 696
 697 &sdhi2 {
 698         pinctrl-0 = <&sdhi2_pins>;
 699         pinctrl-1 = <&sdhi2_pins_uhs>;
 700         pinctrl-names = "default", "state_uhs";
 701
 702         vmmc-supply = <&vcc_sdhi2>;
 703         vqmmc-supply = <&vccq_sdhi2>;
 704         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 705         sd-uhs-sdr50;
 706         status = "okay";
 707 };
 708
 709 &qspi {
 710         pinctrl-0 = <&qspi_pins>;
 711         pinctrl-names = "default";
 712
 713         status = "okay";
 714
 715         flash: flash@0 {
 716                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 717                 reg = <0>;
 718                 spi-max-frequency = <30000000>;
 719                 spi-tx-bus-width = <4>;
 720                 spi-rx-bus-width = <4>;
 721                 spi-cpha;
 722                 spi-cpol;
 723                 m25p,fast-read;
 724
 725                 partitions {
 726                         compatible = "fixed-partitions";
 727                         #address-cells = <1>;
 728                         #size-cells = <1>;
 729
 730                         partition@0 {
 731                                 label = "loader";
 732                                 reg = <0x00000000 0x00080000>;
 733                                 read-only;
 734                         };
 735                         partition@80000 {
 736                                 label = "user";
 737                                 reg = <0x00080000 0x00580000>;
 738                                 read-only;
 739                         };
 740                         partition@600000 {
 741                                 label = "flash";
 742                                 reg = <0x00600000 0x03a00000>;
 743                         };
 744                 };
 745         };
 746 };
 747
 748 &msiof0 {
 749         pinctrl-0 = <&msiof0_pins>;
 750         pinctrl-names = "default";
 751
 752         status = "okay";
 753
 754         pmic: pmic@0 {
 755                 compatible = "renesas,r2a11302ft";
 756                 reg = <0>;
 757                 spi-max-frequency = <6000000>;
 758                 spi-cpol;
 759                 spi-cpha;
 760         };
 761 };
 762
 763 &i2c1 {
 764         pinctrl-0 = <&i2c1_pins>;
 765         pinctrl-names = "i2c-exio1";
 766 };
 767
 768 &i2c2 {
 769         pinctrl-0 = <&i2c2_pins>;
 770         pinctrl-names = "i2c-hdmi";
 771
 772         clock-frequency = <100000>;
 773 };
 774
 775 &i2c4 {
 776         pinctrl-0 = <&i2c4_pins>;
 777         pinctrl-names = "i2c-exio4";
 778 };
 779
 780 &i2c6 {
 781         pinctrl-names = "default";
 782         pinctrl-0 = <&pmic_irq_pins>;
 783         status = "okay";
 784         clock-frequency = <100000>;
 785
 786         pmic@58 {
 787                 compatible = "dlg,da9063";
 788                 reg = <0x58>;
 789                 interrupt-parent = <&irqc0>;
 790                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 791                 interrupt-controller;
 792
 793                 rtc {
 794                         compatible = "dlg,da9063-rtc";
 795                 };
 796
 797                 wdt {
 798                         compatible = "dlg,da9063-watchdog";
 799                 };
 800         };
 801
 802         vdd_dvfs: regulator@68 {
 803                 compatible = "dlg,da9210";
 804                 reg = <0x68>;
 805                 interrupt-parent = <&irqc0>;
 806                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 807
 808                 regulator-min-microvolt = <1000000>;
 809                 regulator-max-microvolt = <1000000>;
 810                 regulator-boot-on;
 811                 regulator-always-on;
 812         };
 813 };
 814
 815 &pci0 {
 816         status = "okay";
 817         pinctrl-0 = <&usb0_pins>;
 818         pinctrl-names = "default";
 819 };
 820
 821 &pci1 {
 822         status = "okay";
 823         pinctrl-0 = <&usb1_pins>;
 824         pinctrl-names = "default";
 825 };
 826
 827 &hsusb {
 828         status = "okay";
 829         pinctrl-0 = <&usb0_pins>;
 830         pinctrl-names = "default";
 831         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 832 };
 833
 834 &usbphy {
 835         status = "okay";
 836 };
 837
 838 &pcie_bus_clk {
 839         clock-frequency = <100000000>;
 840 };
 841
 842 &pciec {
 843         status = "okay";
 844 };
 845
 846 &cpu0 {
 847         cpu0-supply = <&vdd_dvfs>;
 848 };
 849
 850 /* HDMI video input */
 851 &vin0 {
 852         status = "okay";
 853         pinctrl-0 = <&vin0_pins>;
 854         pinctrl-names = "default";
 855
 856         port {
 857                 vin0ep2: endpoint {
 858                         remote-endpoint = <&adv7612_out>;
 859                         bus-width = <24>;
 860                         hsync-active = <0>;
 861                         vsync-active = <0>;
 862                         pclk-sample = <1>;
 863                         data-active = <1>;
 864                 };
 865         };
 866 };
 867
 868 /* composite video input */
 869 &vin1 {
 870         status = "okay";
 871         pinctrl-0 = <&vin1_pins>;
 872         pinctrl-names = "default";
 873
 874         port {
 875                 vin1ep: endpoint {
 876                         remote-endpoint = <&adv7180>;
 877                         bus-width = <8>;
 878                 };
 879         };
 880 };
 881
 882 &rcar_sound {
 883         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 884         pinctrl-names = "default";
 885
 886         /* Single DAI */
 887         #sound-dai-cells = <0>;
 888
 889         status = "okay";
 890
 891         rcar_sound,dai {
 892                 dai0 {
 893                         playback = <&ssi0 &src2 &dvc0>;
 894                         capture  = <&ssi1 &src3 &dvc1>;
 895                 };
 896         };
 897 };
 898
 899 &ssi1 {
 900         shared-pin;
 901 };