i2c: muxes: pca954x: Add support for GPIO reset line
[platform/kernel/u-boot.git] / arch / arm / dts / omap36xx.dtsi
1 /*
2  * Device Tree Source for OMAP3 SoC
3  *
4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This file is licensed under the terms of the GNU General Public License
7  * version 2.  This program is licensed "as is" without any warranty of any
8  * kind, whether express or implied.
9  */
10
11 #include <dt-bindings/media/omap3-isp.h>
12
13 #include "omap3.dtsi"
14
15 / {
16        aliases {
17                serial3 = &uart4;
18        };
19
20        cpus {
21                /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
22                cpu@0 {
23                        operating-points = <
24                                /* kHz    uV */
25                                300000  1012500
26                                600000  1200000
27                                800000  1325000
28                        >;
29                        clock-latency = <300000>; /* From legacy driver */
30                };
31        };
32
33        ocp@68000000 {
34                uart4: serial@49042000 {
35                        compatible = "ti,omap3-uart";
36                        reg = <0x49042000 0x400>;
37                        interrupts = <80>;
38                        dmas = <&sdma 81 &sdma 82>;
39                        dma-names = "tx", "rx";
40                        ti,hwmods = "uart4";
41                        clock-frequency = <48000000>;
42                };
43
44                abb_mpu_iva: regulator-abb-mpu {
45                        compatible = "ti,abb-v1";
46                        regulator-name = "abb_mpu_iva";
47                        #address-cells = <0>;
48                        #size-cells = <0>;
49                        reg = <0x483072f0 0x8>, <0x48306818 0x4>;
50                        reg-names = "base-address", "int-address";
51                        ti,tranxdone-status-mask = <0x4000000>;
52                        clocks = <&sys_ck>;
53                        ti,settling-time = <30>;
54                        ti,clock-cycles = <8>;
55                        ti,abb_info = <
56                        /*uV            ABB     efuse   rbb_m   fbb_m   vset_m*/
57                        1012500         0       0       0       0       0
58                        1200000         0       0       0       0       0
59                        1325000         0       0       0       0       0
60                        1375000         1       0       0       0       0
61                        >;
62                };
63
64                omap3_pmx_core2: pinmux@480025a0 {
65                        compatible = "ti,omap3-padconf", "pinctrl-single";
66                        reg = <0x480025a0 0x5c>;
67                        #address-cells = <1>;
68                        #size-cells = <0>;
69                        #interrupt-cells = <1>;
70                        interrupt-controller;
71                        pinctrl-single,register-width = <16>;
72                        pinctrl-single,function-mask = <0xff1f>;
73                };
74
75                isp: isp@480bc000 {
76                        compatible = "ti,omap3-isp";
77                        reg = <0x480bc000 0x12fc
78                               0x480bd800 0x0600>;
79                        interrupts = <24>;
80                        iommus = <&mmu_isp>;
81                        syscon = <&scm_conf 0x2f0>;
82                        ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
83                        #clock-cells = <1>;
84                        ports {
85                                #address-cells = <1>;
86                                #size-cells = <0>;
87                        };
88                };
89
90                bandgap@48002524 {
91                        reg = <0x48002524 0x4>;
92                        compatible = "ti,omap36xx-bandgap";
93                        #thermal-sensor-cells = <0>;
94                };
95        };
96 };
97
98 /* OMAP3630 needs dss_96m_fck for VENC */
99 &venc {
100        clocks = <&dss_tv_fck>, <&dss_96m_fck>;
101        clock-names = "fck", "tv_dac_clk";
102 };
103
104 &ssi {
105        status = "ok";
106
107        clocks = <&ssi_ssr_fck>,
108                 <&ssi_sst_fck>,
109                 <&ssi_ick>;
110        clock-names = "ssi_ssr_fck",
111                      "ssi_sst_fck",
112                      "ssi_ick";
113 };
114
115 /include/ "omap34xx-omap36xx-clocks.dtsi"
116 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
117 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
118 /include/ "omap36xx-clocks.dtsi"