1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (c) 2017 Andreas Färber
8 #include "meson-gxbb.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
12 compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
20 stdout-path = "serial0:115200n8";
24 device_type = "memory";
25 reg = <0x0 0x0 0x0 0x80000000>;
29 compatible = "gpio-leds";
32 label = "nanopi-k2:blue:stat";
33 gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
39 vdd_5v: regulator-vdd-5v {
40 compatible = "regulator-fixed";
41 regulator-name = "VDD_5V";
42 regulator-min-microvolt = <5000000>;
43 regulator-max-microvolt = <5000000>;
46 vddio_ao18: regulator-vddio-ao18 {
47 compatible = "regulator-fixed";
48 regulator-name = "VDDIO_AO18";
49 regulator-min-microvolt = <1800000>;
50 regulator-max-microvolt = <1800000>;
53 vddio_ao3v3: regulator-vddio-ao3v3 {
54 compatible = "regulator-fixed";
55 regulator-name = "VDDIO_AO3.3V";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
60 vddio_tf: regulator-vddio-tf {
61 compatible = "regulator-gpio";
63 regulator-name = "VDDIO_TF";
64 regulator-min-microvolt = <1800000>;
65 regulator-max-microvolt = <3300000>;
67 gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
73 regulator-settling-time-up-us = <100>;
74 regulator-settling-time-down-us = <5000>;
78 compatible = "pwm-clock";
80 clock-frequency = <32768>;
81 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
84 sdio_pwrseq: sdio-pwrseq {
85 compatible = "mmc-pwrseq-simple";
86 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
88 clock-names = "ext_clock";
91 vcc1v8: regulator-vcc1v8 {
92 compatible = "regulator-fixed";
93 regulator-name = "VCC1.8V";
94 regulator-min-microvolt = <1800000>;
95 regulator-max-microvolt = <1800000>;
98 vcc3v3: regulator-vcc3v3 {
99 compatible = "regulator-fixed";
100 regulator-name = "VCC3.3V";
101 regulator-min-microvolt = <3300000>;
102 regulator-max-microvolt = <3300000>;
105 emmc_pwrseq: emmc-pwrseq {
106 compatible = "mmc-pwrseq-emmc";
107 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
110 /* CVBS is available on CON1 pin 36, disabled by default */
112 compatible = "composite-video-connector";
116 cvbs_connector_in: endpoint {
117 remote-endpoint = <&cvbs_vdac_out>;
123 compatible = "hdmi-connector";
127 hdmi_connector_in: endpoint {
128 remote-endpoint = <&hdmi_tx_tmds_out>;
136 pinctrl-0 = <&ao_cec_pins>;
137 pinctrl-names = "default";
138 hdmi-phandle = <&hdmi_tx>;
142 cvbs_vdac_out: endpoint {
143 remote-endpoint = <&cvbs_connector_in>;
149 pinctrl-0 = <ð_rgmii_pins>;
150 pinctrl-names = "default";
152 phy-handle = <ð_phy0>;
155 amlogic,tx-delay-ns = <2>;
157 snps,reset-gpio = <&gpio GPIOZ_14 0>;
158 snps,reset-delays-us = <0 10000 1000000>;
159 snps,reset-active-low;
162 compatible = "snps,dwmac-mdio";
163 #address-cells = <1>;
166 eth_phy0: ethernet-phy@0 {
167 /* Realtek RTL8211F (0x001cc916) */
169 interrupt-parent = <&gpio_intc>;
170 /* MAC_INTR on GPIOZ_15 */
171 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
178 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
179 pinctrl-names = "default";
183 hdmi_tx_tmds_out: endpoint {
184 remote-endpoint = <&hdmi_connector_in>;
190 pinctrl-0 = <&remote_input_ao_pins>;
191 pinctrl-names = "default";
195 gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
196 "VCCK En", "CON1 Header Pin31",
197 "I2S Header Pin6", "IR In", "I2S Header Pin7",
198 "I2S Header Pin3", "I2S Header Pin4",
199 "I2S Header Pin5", "HDMI CEC", "SYS LED",
205 gpio-line-names = /* Bank GPIOZ */
206 "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
207 "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
208 "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
209 "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
210 "Eth PHY nRESET", "Eth PHY Intc",
212 "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
215 "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
216 "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
217 "eMMC Reset", "eMMC CMD",
218 "", "", "", "", "eMMC DS",
221 "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
222 "SDCard D3", "SDCard D2", "SDCard Det",
224 "", "", "", "", "", "", "", "", "", "", "", "", "",
225 "", "", "", "", "", "", "", "", "", "", "",
226 "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
227 "VDDEE Regulator", "VCCK Regulator",
229 "CON1 Header Pin7", "CON1 Header Pin11",
230 "CON1 Header Pin13", "CON1 Header Pin15",
231 "CON1 Header Pin18", "CON1 Header Pin19",
232 "CON1 Header Pin22", "CON1 Header Pin21",
233 "CON1 Header Pin24", "CON1 Header Pin23",
234 "CON1 Header Pin26", "CON1 Header Pin29",
235 "CON1 Header Pin32", "CON1 Header Pin8",
236 "CON1 Header Pin10", "CON1 Header Pin16",
239 "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
240 "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
241 "WIFI Power Enable", "WIFI WAKE HOST",
242 "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
243 "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
244 "Bluetooth UART TX", "Bluetooth UART RX",
245 "Bluetooth UART CTS", "Bluetooth UART RTS",
246 "", "", "", "WIFI 32K", "Bluetooth Enable",
247 "Bluetooth WAKE HOST", "",
249 "", "CON1 Header Pin35", "", "";
254 pinctrl-0 = <&pwm_e_pins>;
255 pinctrl-names = "default";
256 clocks = <&clkc CLKID_FCLK_DIV4>;
257 clock-names = "clkin0";
262 vref-supply = <&vddio_ao18>;
268 pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
269 pinctrl-1 = <&sdio_clk_gate_pins>;
270 pinctrl-names = "default", "clk-gate";
271 #address-cells = <1>;
276 max-frequency = <200000000>;
281 mmc-pwrseq = <&sdio_pwrseq>;
283 vmmc-supply = <&vddio_ao3v3>;
284 vqmmc-supply = <&vddio_ao18>;
287 compatible = "brcm,bcm4329-fmac";
295 pinctrl-0 = <&sdcard_pins>;
296 pinctrl-1 = <&sdcard_clk_gate_pins>;
297 pinctrl-names = "default", "clk-gate";
305 max-frequency = <200000000>;
308 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
311 vmmc-supply = <&vddio_ao3v3>;
312 vqmmc-supply = <&vddio_tf>;
318 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
319 pinctrl-1 = <&emmc_clk_gate_pins>;
320 pinctrl-names = "default", "clk-gate";
323 max-frequency = <200000000>;
330 mmc-pwrseq = <&emmc_pwrseq>;
331 vmmc-supply = <&vcc3v3>;
332 vqmmc-supply = <&vcc1v8>;
338 pinctrl-0 = <&uart_ao_a_pins>;
339 pinctrl-names = "default";
342 /* Bluetooth on AP6212 */
345 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
346 pinctrl-names = "default";
352 pinctrl-0 = <&uart_c_pins>;
353 pinctrl-names = "default";
358 phy-supply = <&vdd_5v>;