arch/arm/dts/ls1021a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Freescale ls1021a SOC common device tree source
   4  *
   5  * Copyright 2013-2015 Freescale Semiconductor, Inc.
   6  */
   7
   8 #include "skeleton.dtsi"
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10
  11 / {
  12         compatible = "fsl,ls1021a";
  13         interrupt-parent = <&gic>;
  14
  15         aliases {
  16                 serial0 = &lpuart0;
  17                 serial1 = &lpuart1;
  18                 serial2 = &lpuart2;
  19                 serial3 = &lpuart3;
  20                 serial4 = &lpuart4;
  21                 serial5 = &lpuart5;
  22                 sysclk = &sysclk;
  23         };
  24
  25         cpus {
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 cpu@f00 {
  30                         compatible = "arm,cortex-a7";
  31                         device_type = "cpu";
  32                         reg = <0xf00>;
  33                         clocks = <&cluster1_clk>;
  34                 };
  35
  36                 cpu@f01 {
  37                         compatible = "arm,cortex-a7";
  38                         device_type = "cpu";
  39                         reg = <0xf01>;
  40                         clocks = <&cluster1_clk>;
  41                 };
  42         };
  43
  44         timer {
  45                 compatible = "arm,armv7-timer";
  46                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  47                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  48                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  49                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  50         };
  51
  52         pmu {
  53                 compatible = "arm,cortex-a7-pmu";
  54                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
  55                              <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
  56         };
  57
  58         soc {
  59                 compatible = "simple-bus";
  60                 #address-cells = <1>;
  61                 #size-cells = <1>;
  62                 device_type = "soc";
  63                 interrupt-parent = <&gic>;
  64                 ranges;
  65
  66                 gic: interrupt-controller@1400000 {
  67                         compatible = "arm,cortex-a7-gic";
  68                         #interrupt-cells = <3>;
  69                         interrupt-controller;
  70                         reg = <0x1401000 0x1000>,
  71                               <0x1402000 0x1000>,
  72                               <0x1404000 0x2000>,
  73                               <0x1406000 0x2000>;
  74                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
  75
  76                 };
  77
  78                 ifc: ifc@1530000 {
  79                         compatible = "fsl,ifc", "simple-bus";
  80                         reg = <0x1530000 0x10000>;
  81                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
  82                 };
  83
  84                 dcfg: dcfg@1ee0000 {
  85                         compatible = "fsl,ls1021a-dcfg", "syscon";
  86                         reg = <0x1ee0000 0x10000>;
  87                         big-endian;
  88                 };
  89
  90                 esdhc: esdhc@1560000 {
  91                         compatible = "fsl,esdhc";
  92                         reg = <0x1560000 0x10000>;
  93                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
  94                         clock-frequency = <0>;
  95                         voltage-ranges = <1800 1800 3300 3300>;
  96                         sdhci,auto-cmd12;
  97                         big-endian;
  98                         bus-width = <4>;
  99                 };
 100
 101                 scfg: scfg@1570000 {
 102                         compatible = "fsl,ls1021a-scfg", "syscon";
 103                         reg = <0x1570000 0x10000>;
 104                         big-endian;
 105                 };
 106
 107                 clockgen: clocking@1ee1000 {
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110                         ranges = <0x0 0x1ee1000 0x10000>;
 111
 112                         sysclk: sysclk {
 113                                 compatible = "fixed-clock";
 114                                 #clock-cells = <0>;
 115                                 clock-output-names = "sysclk";
 116                         };
 117
 118                         cga_pll1: pll@800 {
 119                                 compatible = "fsl,qoriq-core-pll-2.0";
 120                                 #clock-cells = <1>;
 121                                 reg = <0x800 0x10>;
 122                                 clocks = <&sysclk>;
 123                                 clock-output-names = "cga-pll1", "cga-pll1-div2",
 124                                                      "cga-pll1-div4";
 125                         };
 126
 127                         platform_clk: pll@c00 {
 128                                 compatible = "fsl,qoriq-core-pll-2.0";
 129                                 #clock-cells = <1>;
 130                                 reg = <0xc00 0x10>;
 131                                 clocks = <&sysclk>;
 132                                 clock-output-names = "platform-clk", "platform-clk-div2";
 133                         };
 134
 135                         cluster1_clk: clk0c0@0 {
 136                                 compatible = "fsl,qoriq-core-mux-2.0";
 137                                 #clock-cells = <0>;
 138                                 reg = <0x0 0x10>;
 139                                 clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
 140                                 clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
 141                                 clock-output-names = "cluster1-clk";
 142                         };
 143                 };
 144
 145                 dspi0: dspi@2100000 {
 146                         compatible = "fsl,vf610-dspi";
 147                         #address-cells = <1>;
 148                         #size-cells = <0>;
 149                         reg = <0x2100000 0x10000>;
 150                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 151                         clock-names = "dspi";
 152                         clocks = <&platform_clk 1>;
 153                         num-cs = <6>;
 154                         big-endian;
 155                         status = "disabled";
 156                 };
 157
 158                 dspi1: dspi@2110000 {
 159                         compatible = "fsl,vf610-dspi";
 160                         #address-cells = <1>;
 161                         #size-cells = <0>;
 162                         reg = <0x2110000 0x10000>;
 163                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 164                         clock-names = "dspi";
 165                         clocks = <&platform_clk 1>;
 166                         num-cs = <6>;
 167                         big-endian;
 168                         status = "disabled";
 169                 };
 170
 171                 qspi: quadspi@1550000 {
 172                         compatible = "fsl,ls1021a-qspi";
 173                         #address-cells = <1>;
 174                         #size-cells = <0>;
 175                         reg = <0x1550000 0x10000>,
 176                                 <0x40000000 0x1000000>;
 177                         reg-names = "QuadSPI", "QuadSPI-memory";
 178                         status = "disabled";
 179                 };
 180
 181                 i2c0: i2c@2180000 {
 182                         compatible = "fsl,vf610-i2c";
 183                         #address-cells = <1>;
 184                         #size-cells = <0>;
 185                         reg = <0x2180000 0x10000>;
 186                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 187                         clock-names = "i2c";
 188                         clocks = <&platform_clk 1>;
 189                         status = "disabled";
 190                 };
 191
 192                 i2c1: i2c@2190000 {
 193                         compatible = "fsl,vf610-i2c";
 194                         #address-cells = <1>;
 195                         #size-cells = <0>;
 196                         reg = <0x2190000 0x10000>;
 197                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 198                         clock-names = "i2c";
 199                         clocks = <&platform_clk 1>;
 200                         status = "disabled";
 201                 };
 202
 203                 i2c2: i2c@21a0000 {
 204                         compatible = "fsl,vf610-i2c";
 205                         #address-cells = <1>;
 206                         #size-cells = <0>;
 207                         reg = <0x21a0000 0x10000>;
 208                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 209                         clock-names = "i2c";
 210                         clocks = <&platform_clk 1>;
 211                         status = "disabled";
 212                 };
 213
 214                 uart0: serial@21c0500 {
 215                         compatible = "fsl,16550-FIFO64", "ns16550a";
 216                         reg = <0x21c0500 0x100>;
 217                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 218                         fifo-size = <15>;
 219                         status = "disabled";
 220                 };
 221
 222                 uart1: serial@21c0600 {
 223                         compatible = "fsl,16550-FIFO64", "ns16550a";
 224                         reg = <0x21c0600 0x100>;
 225                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 226                         fifo-size = <15>;
 227                         status = "disabled";
 228                 };
 229
 230                 uart2: serial@21d0500 {
 231                         compatible = "fsl,16550-FIFO64", "ns16550a";
 232                         reg = <0x21d0500 0x100>;
 233                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 234                         fifo-size = <15>;
 235                         status = "disabled";
 236                 };
 237
 238                 uart3: serial@21d0600 {
 239                         compatible = "fsl,16550-FIFO64", "ns16550a";
 240                         reg = <0x21d0600 0x100>;
 241                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 242                         fifo-size = <15>;
 243                         status = "disabled";
 244                 };
 245
 246                 lpuart0: serial@2950000 {
 247                         compatible = "fsl,ls1021a-lpuart";
 248                         reg = <0x2950000 0x1000>;
 249                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 250                         clocks = <&sysclk>;
 251                         clock-names = "ipg";
 252                         status = "disabled";
 253                 };
 254
 255                 lpuart1: serial@2960000 {
 256                         compatible = "fsl,ls1021a-lpuart";
 257                         reg = <0x2960000 0x1000>;
 258                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 259                         clocks = <&platform_clk 1>;
 260                         clock-names = "ipg";
 261                         status = "disabled";
 262                 };
 263
 264                 lpuart2: serial@2970000 {
 265                         compatible = "fsl,ls1021a-lpuart";
 266                         reg = <0x2970000 0x1000>;
 267                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 268                         clocks = <&platform_clk 1>;
 269                         clock-names = "ipg";
 270                         status = "disabled";
 271                 };
 272
 273                 lpuart3: serial@2980000 {
 274                         compatible = "fsl,ls1021a-lpuart";
 275                         reg = <0x2980000 0x1000>;
 276                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 277                         clocks = <&platform_clk 1>;
 278                         clock-names = "ipg";
 279                         status = "disabled";
 280                 };
 281
 282                 lpuart4: serial@2990000 {
 283                         compatible = "fsl,ls1021a-lpuart";
 284                         reg = <0x2990000 0x1000>;
 285                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 286                         clocks = <&platform_clk 1>;
 287                         clock-names = "ipg";
 288                         status = "disabled";
 289                 };
 290
 291                 lpuart5: serial@29a0000 {
 292                         compatible = "fsl,ls1021a-lpuart";
 293                         reg = <0x29a0000 0x1000>;
 294                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 295                         clocks = <&platform_clk 1>;
 296                         clock-names = "ipg";
 297                         status = "disabled";
 298                 };
 299
 300                 wdog0: watchdog@2ad0000 {
 301                         compatible = "fsl,imx21-wdt";
 302                         reg = <0x2ad0000 0x10000>;
 303                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 304                         clocks = <&platform_clk 1>;
 305                         clock-names = "wdog-en";
 306                         big-endian;
 307                 };
 308
 309                 sai1: sai@2b50000 {
 310                         compatible = "fsl,vf610-sai";
 311                         reg = <0x2b50000 0x10000>;
 312                         interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 313                         clocks = <&platform_clk 1>;
 314                         clock-names = "sai";
 315                         dma-names = "tx", "rx";
 316                         dmas = <&edma0 1 47>,
 317                                <&edma0 1 46>;
 318                         big-endian;
 319                         status = "disabled";
 320                 };
 321
 322                 sai2: sai@2b60000 {
 323                         compatible = "fsl,vf610-sai";
 324                         reg = <0x2b60000 0x10000>;
 325                         interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 326                         clocks = <&platform_clk 1>;
 327                         clock-names = "sai";
 328                         dma-names = "tx", "rx";
 329                         dmas = <&edma0 1 45>,
 330                                <&edma0 1 44>;
 331                         big-endian;
 332                         status = "disabled";
 333                 };
 334
 335                 edma0: edma@2c00000 {
 336                         #dma-cells = <2>;
 337                         compatible = "fsl,vf610-edma";
 338                         reg = <0x2c00000 0x10000>,
 339                               <0x2c10000 0x10000>,
 340                               <0x2c20000 0x10000>;
 341                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 342                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 343                         interrupt-names = "edma-tx", "edma-err";
 344                         dma-channels = <32>;
 345                         big-endian;
 346                         clock-names = "dmamux0", "dmamux1";
 347                         clocks = <&platform_clk 1>,
 348                                  <&platform_clk 1>;
 349                 };
 350
 351                 enet0: ethernet@2d10000 {
 352                         compatible = "fsl,etsec2";
 353                         reg = <0x2d10000 0x1000>;
 354                         status = "disabled";
 355                 };
 356
 357                 enet1: ethernet@2d50000 {
 358                         compatible = "fsl,etsec2";
 359                         reg = <0x2d50000 0x1000>;
 360                         status = "disabled";
 361                 };
 362
 363                 enet2: ethernet@2d90000 {
 364                         compatible = "fsl,etsec2";
 365                         reg = <0x2d90000 0x1000>;
 366                         status = "disabled";
 367                 };
 368
 369                 mdio0: mdio@2d24000 {
 370                         compatible = "fsl,etsec2-mdio";
 371                         reg = <0x2d24000 0x4000>;
 372                         #address-cells = <1>;
 373                         #size-cells = <0>;
 374                 };
 375
 376                 mdio1: mdio@2d64000 {
 377                         compatible = "fsl,etsec2-mdio";
 378                         reg = <0x2d64000 0x4000>;
 379                         #address-cells = <1>;
 380                         #size-cells = <0>;
 381                 };
 382
 383                 usb@8600000 {
 384                         compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 385                         reg = <0x8600000 0x1000>;
 386                         interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 387                         dr_mode = "host";
 388                         phy_type = "ulpi";
 389                 };
 390
 391                 usb3@3100000 {
 392                         compatible = "fsl,layerscape-dwc3";
 393                         reg = <0x3100000 0x10000>;
 394                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 395                         dr_mode = "host";
 396                 };
 397
 398                 pcie@3400000 {
 399                         compatible = "fsl,ls-pcie", "snps,dw-pcie";
 400                         reg = <0x03400000 0x20000   /* dbi registers */
 401                                0x01570000 0x10000   /* pf controls registers */
 402                                0x24000000 0x20000>; /* configuration space */
 403                         reg-names = "dbi", "ctrl", "config";
 404                         big-endian;
 405                         #address-cells = <3>;
 406                         #size-cells = <2>;
 407                         device_type = "pci";
 408                         bus-range = <0x0 0xff>;
 409                         ranges = <0x81000000 0x0 0x00000000 0x24020000 0x0 0x00010000   /* downstream I/O */
 410                                   0x82000000 0x0 0x28000000 0x28000000 0x0 0x08000000>; /* non-prefetchable memory */
 411                 };
 412
 413                 pcie@3500000 {
 414                         compatible = "fsl,ls-pcie", "snps,dw-pcie";
 415                         reg = <0x03500000 0x10000    /* dbi registers */
 416                                0x01570000 0x10000    /* pf controls registers */
 417                                0x34000000 0x20000>;  /* configuration space */
 418                         reg-names = "dbi", "ctrl", "config";
 419                         big-endian;
 420                         #address-cells = <3>;
 421                         #size-cells = <2>;
 422                         device_type = "pci";
 423                         num-lanes = <2>;
 424                         bus-range = <0x0 0xff>;
 425                         ranges = <0x81000000 0x0 0x00000000 0x34020000 0x0 0x00010000   /* downstream I/O */
 426                                   0x82000000 0x0 0x38000000 0x38000000 0x0 0x08000000>; /* non-prefetchable memory */
 427                 };
 428
 429                 sata: sata@3200000 {
 430                         compatible = "fsl,ls1021a-ahci";
 431                         reg = <0x3200000 0x10000 0x20220520 0x4>;
 432                         reg-names = "sata-base", "ecc-addr";
 433                         interrupts = <0 101 4>;
 434                         status = "disabled";
 435                 };
 436         };
 437 };