arch/arm/dts/k3-j7200-som-p0.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "k3-j7200.dtsi"
   9
  10 / {
  11         memory@80000000 {
  12                 device_type = "memory";
  13                 /* 4G RAM */
  14                 reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
  15                       <0x00000008 0x80000000 0x00000000 0x80000000>;
  16         };
  17
  18         reserved_memory: reserved-memory {
  19                 #address-cells = <2>;
  20                 #size-cells = <2>;
  21                 ranges;
  22
  23                 secure_ddr: optee@9e800000 {
  24                         reg = <0x00 0x9e800000 0x00 0x01800000>;
  25                         alignment = <0x1000>;
  26                         no-map;
  27                 };
  28         };
  29 };
  30
  31 &wkup_pmx0 {
  32         mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
  33                 pinctrl-single,pins = <
  34                         J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
  35                         J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
  36                         J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
  37                         J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
  38                         J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
  39                         J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
  40                         J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
  41                         J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
  42                         J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
  43                         J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
  44                         J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
  45                         J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
  46                         J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
  47                 >;
  48         };
  49 };
  50
  51 &hbmc {
  52         status = "disabled";
  53         pinctrl-names = "default";
  54         pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
  55         ranges = <0x0 0x0 0x5 0x0 0x4000000>, /* 64MB Flash on CS0 */
  56                  <0x1 0x0 0x5 0x4000000 0x800000>; /* 8MB RAM on CS1 */
  57
  58         flash@0,0 {
  59                 compatible = "cypress,hyperflash", "cfi-flash";
  60                 reg = <0x0 0x0 0x4000000>;
  61         };
  62 };